Plieno Plazmos pirkti naudotą (4 468)

Sąlyga: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without prebending at D = 5x top roll: 9 mm Max. sheet thickness without prebending at D = 1.5x top roll: 7 mm Max. sheet thickness with prebending at D = 5x top roll: 7 mm Max. sheet thickness with prebending at D = 1.5x top roll: 5 mm Top roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE standard OPTIONS: Bedpfx Adjynmzpeweld Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Sąlyga: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2050 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending at D = 5x top roll: 20 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 16 mm Max. plate thickness with pre-bending at D = 5x top roll: 16 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 12 mm Top roll diameter: 280 mm Bottom roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Blsdpfsynmylox Adwed Cone bending device Hydraulic relief for the top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS (PRICES ON REQUEST): Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Sąlyga: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity - mild steel: 10 mm Max. plate thickness without pre-bending at D = 5x top roll: 10 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 8 mm Max. plate thickness with pre-bending at D = 5x top roll: 8 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 200 - 220 mm Bottom roll diameter: 200 - 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor output: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The maximum sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended Bjdpfx Asynmyfodwjld

Sąlyga: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roll: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 220 mm Lower roll diameter: 200 mm Side roll diameter: 160 mm Bjdpfx Aoynmx Isdweld Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll unloading Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Sąlyga: naujas, Būklė: nauja Pristatymo laikas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 22 300 € Lizingo įmoka: 428,16 € Lenkimo ilgis: 1550 mm Didžiausia lenkimo galia - konstrukcinis plienas: 4,5 mm Maksimalus lakšto storis be užlenkimo - konstrukcinis plienas: 4,5 mm Maksimalus lakšto storis su užlenkimu - konstrukcinis plienas: 3,5 mm Maksimalus lakšto storis be užlenkimo, kai D=5x viršutinis volas: 4,5 mm Maksimalus lakšto storis be užlenkimo, kai D=1,5x viršutinis volas: 3,5 mm Maksimalus lakšto storis su užlenkimu, kai D=5x viršutiniai volai: 3,5 mm Maksimalus lakšto storis su užlenkimu, kai D=1,5x viršutinis volas: 2,5 mm Viršutinio valo skersmuo: 130 mm Apatinio valo skersmuo: 130 mm Šoninio valo skersmuo: 130 mm Valcavimo greitis: 5 m/min Ilgis: 3300 mm Plotis: 1150 mm Aukštis: 1110 mm Svoris: 2370 kg Varomasis valcų pavara Viršutinis ir apatinis volai varomi Blsdpsynmwdefx Adwjd Hidraulinis šoninių valcų padavimas 3 skaitmeniniai ekranai Hidrauliniai atlenkiami guoliai Grūdinti volai Kūginio lenkimo įrenginys Eksploatacijos instrukcija vokiečių arba anglų kalba PASIRINKTINAI: Viršutinis palaikymas Šoninis palaikymas Kintamas greitis NC valdymas

Sąlyga: naujas, Būsena: nauja Pristatymo laikas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 16 000 € Bsdpfx Ajynmv Tjdwjld Lizingo įmoka: 307,2 € Lenkimo ilgis: 2050 mm Maks. lenkimo galimybės - konstrukcinis plienas: 4 mm Viršutinio volo skersmuo: 140 mm Variklio galia: 2,2 kW Ilgis: 3200 mm Plotis: 750 mm Aukštis: 1000 mm Svoris: 1650 kg 3 volai Asimetrinė volų išdėstymo sistema su išankstiniu lenkimu 2 volai varomi stabdžių varikliu Rankinis šoninių volų reguliavimas Viršutinis volas išsukamas į priekį Judėjimas pirmyn/atgal Kūginis valcavimas pakreipiant galinius volus Judama valdymo pultas PASIRINKTYS: Grūdinti volai Motorinis šoninių volų reguliavimas Skaitmeninis šoninių volų padėties indikatorius (Iliustracinė nuotrauka)

Sąlyga: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Spain Price: €24,700 Leasing rate: €474.24 X-axis: 1000 mm Y-axis: 400 mm Positioning speed: 12 m/min Positioning accuracy: 0.2 mm Repeatability: 0.1 mm Weight: 300 kg The Semipaxy table is a CNC positioning unit that can be ordered with any GEKA punching machine with a throat depth of at least 500 mm. THE ATTACHMENT CONSISTS OF: * Mounting plate * Table with X and Y axes, driven by servo motors * 15” touchscreen controller “B&R Power Panel 500” based on PC architecture * Each axis (X and Y) is equipped with a servo motor and encoder for precision positioning * Control cabinet WORKFLOW DESCRIPTION: * The positions of the holes to be punched are programmed incrementally or absolutely. * After starting the program, the stops are automatically positioned for the first punching operation. * The material to be punched must be manually placed against the stops, then punching is carried out by actuating the foot pedal. * Once the punch returns to its upper starting position, the stops automatically move to the next programmed position. PC-BASED 15” TOUCHSCREEN CONTROLLER B&R POWER PANEL 500 * B&R Power Panel 500 * Integrated keyboard * Windows operating system * 15” color display with WXGA resolution * Compact Flash memory * USB connection * Ethernet connection * Simple, user-friendly programming * Programming is performed using the Geka-developed “Line Pro” software * Importing of DXF/DSTV files * Network capable * Remote maintenance via Internet Blodpsynmrhjfx Adwod CONTROL CABINET * The control cabinet includes components for axis positioning and machine control * Includes Allen-Bradley Guardmaster® safety relays * The control cabinet is located within the machine frame for PUMA or HYDRACROP models. For retrofitting, the cabinet is located outside the machine frame. * Standard connection: 400 V - 50 Hz - 3 phases. Other configurations available on request. DESCRIPTION OF THE “LINE PRO” PROGRAMMING SOFTWARE: * Visual and very easy to use application with graphic display of the part to be programmed * All steps from design through to production can be carried out directly at the controller * Import of DXF and DSTV files * Graphical representation makes it easier to modify already programmed parts and to detect/correct errors before starting production * Line Pro can also be installed on a PC to transfer data via network or USB to the controller Other X and Y ranges are available on request. Please contact us with your requirements.

Sąlyga: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Spain Price: €35,600 Leasing rate: €679.96 Punching force: 110 t Throat depth: 610 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40/20 or 28/28 mm Stroke: 80 mm Strokes per minute: 28 Flat steel: 600x15 / 400x20 mm Angle steel: 152x152x13 mm Round/square steel: 50 mm Notcher: 13x52x90 mm Motor: 9 kW Length: 2690 mm Width: 1400 mm Height: 2200 mm Blodpfoynmrbjx Adwed Weight: 3300 kg 2 foot switches for independent operation at 2 stations Hydraulic drive Flat bar shear Angle iron shear with minimal distortion through diagonal blade movement Round and square bar shear Rectangular notcher Punching device up to 40 mm diameter Fast hydraulics, center punching device Oil fill Table with stop at punching station Table with stop at notching station Table at flat bar shear Operating manual in GERMAN and ENGLISH OPTION: Kit €970.00 consisting of: 1000 mm length stop with electric contact release for flat, angle, or bar steel station Magnet machine lamp 10 sets of round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm

Sąlyga: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Spain Price: €72,800 Leasing rate: €1,375.92 Punching force: 165 tons Throat depth: 610 mm Number of stations: 5 Max. diameter for sheet thickness (structural steel): 40/30 or 34/34 mm Stroke: 110 mm Strokes per minute: 31 Flat steel: 750x20 / 400x30 mm Angle steel: 205x205x18 mm Round/square steel: 60 mm Rectangular notcher: 16x58x110 mm Motor: 15 kW Length: 2,950 mm Width: 1,600 mm Height: 2,200 mm Weight: 6,300 kg Blsdpfoynmq Rex Adwed 2 foot pedals for independent operation at 2 stations Hydraulic drive Flat steel shear Angle iron shear with minimal twisting due to diagonal blade movement Round and square bar shear Rectangular notcher Punching unit up to diameter 40 mm Fast hydraulics, spotting device Oil filling Table at punching station with stop Table at notching station with stop Table at flat steel shear Operating manual in GERMAN and ENGLISH (illustrative photos) OPTION "KIT": €970 Length stop 1,000 mm with electric contact release, for flat, angle, and bar steel stations Magnetic machine lamp 10 sets of round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm FURTHER MODELS OF THE HYD 165 SERIES: Model HYD 165 S €56,900 Similar to model SD but with 510 mm throat depth Weight: 5,200 kg (illustrative photos) WE HAVE MORE THAN 700 REFERENCES!

Sąlyga: naudotas, Usada centrífuga de discos GEA Westfalia modelo HSB-300-06-777 de acero inoxidable. Densidad de alimentación de entrada: 1,16 kg/dm³, densidad del líquido pesado: 1,30 kg/dm³. Velocidad máxima nominal: 4.800 rpm. La unidad incluye depósito colector de acero inoxidable, bomba Seepex usada y armario de control. El accionamiento se realiza mediante un motor eléctrico trifásico de 75 kW, 1.486 rpm, 400 V, 50 Hz. Bsdsykuimopfx Adwsld

Sąlyga: naudotas, Naudotas Fryma Koruma modelis VME-120/C nerūdijančio plieno vakuuminis proceso indas. - Gamintojas: Fryma Koruma - Modelis: VME-120/C Indas: - Indo talpa: 25 - 120 litrų - Indo darbinis slėgis: -1 baras, 150°C - Apvalkalo talpa: 25 litrai - Apvalkalo darbinis slėgis: 3 barai, 150°C Maišytuvai: - Grandiklinė maišymo sistema: greitis 17/34 aps/min, variklis 2,0/2,4 kW - Homogenizatorius, skersmuo 230 mm: greitis 300 - 1450 aps/min, variklis 15 kW Komplektacija: - vakuuminis siurblys Bljdpfx Adjykpdfjwjd - valdymo pultas - hidraulinė agregatas maišymo įrenginių pakėlimui Techninės specifikacijos: Galia: 19 kW Vakuumas (Taip/Ne): Taip Talpa: 120 litrų Apvalkalas (Taip/Ne): Taip

Sąlyga: naudotas, Naudotas Winkworth nerūdijančio plieno juostinis maišytuvas. Darbinė talpa apie 550 litrų (priklausomai nuo produkto). Maišymo lovio matmenys: apie 1140 mm ilgio x 815 mm pločio x 1015 mm gylio. Su viena pertraukiama nerūdijančio plieno juosta, kurios diametras apie 800 mm, varoma 5 AG, 1440 aps./min, 380-440 V, 50 Hz elektros varikliu per reduktorių. Kiekvienoje pusėje – atverčiamas nerūdijančio plieno dangtis ir vienoje pusėje – apsauginis tinklas. Yra šoninis apatinis išleidimas. Specifikacijos: Talpa: 550 l Išmatavimai: 1140 x 815 x 1015 mm Blodpfxjykn T So Adwod

Sąlyga: geras (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Maišymo bako su blenderiu, YIT Industrial and Network Services Ltd 2010 m. 3000 l, nerūdijantis plienas. ABB variklis ir SULZER pavarų dėžė. Siemens 7ML5221-1AA1, SITRANS Probe LU ultragarsinis lygio siųstuvas skysčių ir srutų lygio bei tūrio stebėjimui. Purkštukinė plovimo sistema. Išleidimo anga apačioje ir čiaupas šone. Būklė kaip nauja, minimaliai naudota. Bedpfxeylpxfe Adwjld

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, naudojamo bako talpa: 15 000 l, Eksterne mål: Diameter Ø 2300 mm, total højde 5500 mm. Vertikale rustfri ståltanke – ét stk. til salg. Konisk bund, 35° hældning med 4" udløb. Blsdjq A R S Dspfx Adwod Konisk top, 15° hældning med mandehul. Materiale: AISI 304.

Sąlyga: naudotas, Gamybos metai: 2019, Vandens srovės pjovimo staklės su plazma Gamintojas: TCI Cutting Tipas: BP-C 4020 Pagaminimo metai: 2019 CNC valdymas: TCI CNC 4.0 Darbinis plotas: 4x2 m Įranga: Bedpfx Asykqwtedwjld 1 pjovimo galvutė KMT OEM SL-VI 50 AG, 4 000 bar, su aukšto slėgio siurbliu 1 plazminė pjovimo galvutė su Hypertherm XPR300 maitinimo šaltiniu Aukštos įtampos valdymo sistema TCI SRA 4.0 Abrazyvo transportavimo sistema Abrazyvo matavimo sistema Apsaugos nuo susidūrimo sistema Vandens valymo įrenginys TCI HIDROSYSTEM 2.0 Dumblo šalinimo sistema Programinė įranga: Lantek Expert 2D su automatine sujungimo funkcija

Sąlyga: geras (naudotas), Gamybos metai: 1999, Hydraulic Bar Shear with Punching Unit Manufacturer: MUBEA Model: HIW 750/510 Year: 1999 Technical Specifications Manufacturer: MUBEA Model: HIW 750/510 Year of manufacture: 1999 Punching force: 75,000 kg Max. punching capacity: Ø 30 x 22 mm Stroke: 70 mm Max. strokes per minute: 42 Working radius: 510 mm Flat steel: 450 x 15 mm / 300 x 20 mm Angle steel: 150 x 13 mm Square steel: 44 mm Round steel: Ø 50 mm Dimensions (L x W x H): 2.0 x 1.40 x 1.80 m Weight: approx. 2.5 t Blodju Sy Uzjpfx Adwjd Equipment - 2000 mm electric back gauge - Tool cabinet - Various tools and accessories as shown in the photos All information subject to change and without guarantee. A demonstration is possible at any time in our showroom.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Hydraulic bar shear with punch station Manufacturer: Epple Model: E-HPS 65 E-Line Technical Data Manufacturer: Epple Model: E-HPS 65 E-Line Stations: 5 Punching Force: 65 t Max. Punching Capacity: Diameter 26 x 20 mm Stroke: 55 mm Working Radius: 305 mm Working Height: 1,030 mm Motor: 5.5 kW Dimensions (LxWxH): 1.7 x 0.95 x 1.90 m Weight: 1.6 t Equipment Blodpowtqmnsfx Adwod - Electric back gauge All information is provided without guarantee. Demonstration available in our showroom at any time.

Sąlyga: geras (naudotas), Flanšinis prijungimas, V-flanšas, vamzdžio flanšas, nerūdijančio plieno flanšas, saugos nuplėšiama jungtis -Vamzdžio flanšas: nerūdijančio plieno flanšas Bjdpfoymar Ejx Adweld -Tipas: HG/T20592-2009 PL200 PN10 304 -Skersmuo: vidinis 213 mm -Skylių išdėstymas: Ø 295 x 22 mm -Matmenys: Ø 340 x 265 mm -Svoris: 26,1 kg

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Guillotine manuelle robuste Blodpfxok N A Sme Adwod Convient pour la découpe de pains durs, de légumes, d'aliments surgelés ou autres produits similaires. Ouverture de coupe adaptée aux produits jusqu'à 150 x 150 mm. Entièrement en acier inoxydable.

Sąlyga: paruoštas naudoti (naudotas), Skylių štampavimo mašina: spaudimo galia 100 t Našumas 40 į 22 mm Kampinis plienas 160 x 16,0 mm Kvadratinė strypas 50,0 mm Apvali strypas 50,0 mm Plokščias plienas 600 x 15,0 / 400 x 20,0 mm Įstatymas 610 mm Variklio galia 8,5 kW Staklių svoris apie 3.150 kg Matmenys I-P-A apie 2200 x 1400 x 1830 mm - patikrintos būklės - Mašinos vaizdo įrašas - ?v=oV49fdNM8dg Įranga: - tvirta elektrohidraulinė profilių žirklė - skylių štampavimo stotelė su greito keitimo perforatoriumi ir matricos laikikliu - įskaitant didelį atraminį stalą su reguliuojamu atmušėju Bjdpoxn Tydjfx Adweld - neribota eigos reguliavimo funkcija su impulsine / įrengimo veiksena - trikampio išpjovimų stotelė su atraminiu stalu - strypų, profilių ir kampinių žirklė - plokščio plieno stotelė su atraminiu ir kreipiamuoju stalu - įvairūs štampai ir matricos (stalčių spinta) - 1x elektrinis ilgio ribotuvas - 2x laisvai judantys pėdiniai jungikliai - naudojimo instrukcija (PDF)

Sąlyga: naudotas, Straightening and welding plate made of solid steel Machined steel plate from a tool frame Length: 2980 mm Bledehwn Tuepfx Adwsd Width: 1580 mm Thickness: 94 mm - Solid steel plate - Milled surface - 4 bolted towing brackets - Plate equipped with several symmetrical boreholes Net weight: 3400 kg

Sąlyga: naudotas, Straightening and welding plate, made of cast steel/grey cast iron, heavily ribbed formerly used as marking and inspection plate heavy-duty straightening plate Blsdpfx Adjdzqr Aewod Length: 1000 mm Width: 1000 mm Thickness: 230 mm Working height: 970 mm Plate thickness: 38 mm (continuous) - Metal base frame Weight: 450 kg

Sąlyga: naudotas, Straightening and welding plate, cast steel/grey cast iron, heavily ribbed former scribing and measuring plate heavy-duty straightening plate Length: 1000 mm Width: 800 mm Thickness: 250 mm Working height: 820 mm Plate thickness: 30 mm throughout - height-adjustable metal base Weight: approx. 400 kg Blodpfx Adsdzqrpowod Surface rusted

Sąlyga: naudotas, Steel cast/grey cast iron straightening and welding plate, heavily ribbed Heavy-duty straightening plate Length: 2000 mm Width: 1600 mm Thickness: 110 mm Working height: 600 mm Plate thickness: 30 mm (continuous) Weight: approx. 1000 kg Good condition, good surface Bledpedzqrbjfx Adwod

Sąlyga: naudotas, Cast steel/grey cast iron straightening and welding plate, heavily ribbed Heavy-duty straightening plate Length: 3050 mm Bljdpfjflt Ecox Adwed Width: 2000 mm Thickness: 300 mm Continuous plate thickness: approx. 55 mm Weight: approx. 4.5 tons Good condition