Pegasus pirkti naudotą (19)

Sąlyga: geras (naudotas), Laboratory power supply, power supply unit, voltage generator, laboratory power device Isdpfxscqp Hhe Abksik - Input: 230 Volt - Output: 100-415 Volt - Dimensions: 320/170/H130 mm - Weight: 3.2 kg

Sąlyga: naujas, Electric voltage: 400 / 440 V Frequency: 50 / 60 Hz Iedpfx Abjd R Uzzokoik No. of phases: 3 / 3 Ph

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, keliamoji galia: 5 000 kg, kėlimo aukštis: 25 000 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, šakių ilgis: 1 200 mm, pavaros tipas: Diesel, Rotating telescopic handler Mast type: Quattro Condition: New machine Technical condition: New Front tyres type: Pneumatic Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres condition: 80 - 100% Iedpfx Abew Eqdkokoik Description: The vehicle is UVV-inspected (accident prevention regulation compliant). A&M pallet fork carrier set including 1200 mm pallet forks, 1500 mm pallet fork carriage plate, and 5t lifting hook. 3rd hydraulic valve, 4th hydraulic valve, heater, road approval as per German regulations (StVZO), full cabin, CE certificate, 3rd hydraulic valve, 4th hydraulic valve, heater, StVZO compliance, fully enclosed cab, CE certification, TÜV/Dekra approval, 20 km/h, 45% limited slip differential on the second axle, 2 front swivelling LEDs on the cab, 2 rear swivelling LEDs on the cab, set of extra support platforms, wheel set 455/70 Michelin standard carriage plate, remote control with 2 joysticks, automatic wheel alignment, kit for driving with upper carriage rotated by 180 degrees, wired reversing camera, three-sided work basket (120 x 240 cm), 5.0 t winch (to be mounted on the carriage plate). Includes work basket and winch.

Sąlyga: labai geros būklės (naudotas), kuro tipas: dyzelinas, spalva: geltonas, kėlimo aukštis: 18 000 mm, stiebo tipas: teleskopinis, Gamybos metai: 2019, veikimo valandos: 664 h,

Sąlyga: naudotas, Gamybos metai: 2002, X-axis travel: 2,600 mm y-axis travel: 1,000 mm z-axis travel: 1,000 mm Table size: 3,600 x 900 mm Max. workpiece weight: 8,000 kg Iiedjgvqqlopfx Abkok Number of T-slots: 6 T-slot width: 22 mm T-slot spacing: 125 mm Spindle taper: ISO 50 DIN 69871 Spindle speed: 4,000 rpm (2 steps: 0 – 1,000, 1,000 – 4,000 rpm) Feed rate: 10 – 5,000 mm/min Rapid traverse: 10,000 / 10,000 / 10,000 mm/min Required floor space: approx. 9.82 x 5.1 x 3.16 m Machine weight: approx. 21.5 t Control: HEIDENHAIN TNC 426 CNC control Motors: Spindle drive motor: 29 kW Feed motor Y-axis: 20 Nm, X- and Z-axis: 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW - Tool changer - Both head joints can be indexed in 2.5° increments

Sąlyga: geras (naudotas), kuro tipas: dyzelinas, spalva: geltonas, kėlimo aukštis: 15 000 mm, ašių konfigūracija: 4x4, Gamybos metai: 2011, veikimo valandos: 2 864 h, Įranga: visų varančiųjų ratų pavara, Pavara: ratas Iisdsq Su Nbopfx Abkek CE žymėjimas: taip Techninė būklė: gera Optinė būklė: gera Pristatymo sąlygos: EXW Gamybos šalis: IT Dėl daugiau informacijos kreipkitės į Vink Machinery. Dieci Pegasus 35.16 * 2011 * Dyzelinas * Kėlimo aukštis 15,7 m * Horizontali pasiekiamumo nuotolis 13,35 m * 4x4x4 * Keliamoji galia 3 500 kg * Savas svoris 13 100 kg * Apžiūra iki 2024 m. gegužės * Įskaitant dokumentus

Sąlyga: labai geros būklės (naudotas), kuro tipas: dyzelinas, spalva: kitas, ašių konfigūracija: 4x4, Gamybos metai: 2016, veikimo valandos: 12 700 h, Įranga: visų varančiųjų ratų pavara, Techninė informacija AdBlue sistema: Taip Pavaros tipas: Ratai Didžiausias greitis: 40 km/h Funkcionalumas CE ženklinimas: taip Iiodpfjxt Nl Hjx Abkek Būklė Techninė būklė: labai gera Vizualinė būklė: labai gera Identifikacija Serijos numeris: BVL1552390 Papildoma informacija Pristatymo sąlygos: EXW Gamybos šalis: IT Daugiau informacijos suteiks Christiaan Dekker.

Sąlyga: naujas, Keliamoji galia: 85 kg Puikiai tinka lanksčiam naudojimui. Mūsų mažasis Pegasus kėlimo stalas yra itin manevringas, universalus, o dėl pėdos pedalo lengvai pritaikomas idealiam darbo aukščiui. Stabilus skardinis paviršius leidžia patogiai laikyti net iki 300 kg sveriančius ruošinius. Jei reikia kito paviršiaus, jį taip pat galima lengvai uždėti. 4 tvirtai guminiais protektoriais dengtų poliamido ratukai su stabdžių sistema užtikrina lengvą valdymą. Sumažėjimo fiksatorius suteikia būtiną saugumo jausmą. Iijdsxfwdnjpfx Abksk Techniniai duomenys: Keliamoji galia: 300 kg Darbinis kėlimo aukštis: 610 mm Konstrukcinis aukštis: 400 mm Rėmas: 970 x 590 mm Bendras aukštis: 1010 mm Svoris: 85 kg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, keliamoji galia: 5 000 kg, kėlimo aukštis: 25 000 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, šakių ilgis: 1 200 mm, pavaros tipas: Diesel, Rotating telehandler Mast type: Quattro Technical condition: New Front tires type: Pneumatic Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires condition: 80 - 100% Description: The machine is UVV-tested. A&M pallet fork carrier set including 1200 mm pallet forks, 1500 mm pallet fork carriage, and 5t lifting hook. 3rd valve, 4th valve, heater, road approval (StVZO), full cab, CE certificate, Iiodow Eqdqopfx Abkek 3rd valve, 4th valve, heater, road traffic approval, full cab, CE certificate, TÜV/DEKRA road approval, 20 km/h, 45% limited slip differential on second axle, 2 front swivel LED work lights on cab, 2 rear swivel LED work lights on cab, additional outrigger platform kit, wheel set 18x22.5 TM R4 Camso, standard fork carriage, remote control with 2 joysticks, automatic wheel alignment, kit for driving while upper structure is rotated 180 degrees, wired reversing camera, three-sided work basket 120 x 240 cm, 4.0 t winch (to be mounted on fork carriage). Includes work basket and winch.

Sąlyga: naudotas, Gamybos metai: 2014, Overview This palletizing and wrapping line consists of an Ocme palletizer and two Robopac Genesis stretch wrapping machines, both from 2014. The system was designed for handling shrink-wrapped containers and is in good condition. It is suitable for palletizing and wrapping multiple pallet formats and offers a production capacity of 30,000 bottles per hour, depending on the format. Layer formation grouping is performed by two Fanuc robots. Two additional Fanucs handle palletizing and the placement of intermediate layers. The palletizing and wrapping line is part of a complete line, some components of which have already been sold. Technical details Palletizer Manufacturer: Ocme Model: Pegasus F450 Year of manufacture: 2014 Processed products: Shrink-wrapped packs: PET 0.75 L 2 x 32 PET 1.0 L 3 x 2 PET 1.5 L 3 x 2 PET 1.5 L 3 x 4 Pallet formats: Euro pallet 800 x 1200 Chep Düsseldorf 600 x 800 Industrial pallet 1000 x 1200 Output: 42,000 bph Two-lane, low-level infeed Equipment: Empty pallet magazine, intermediate layer magazine, intermediate layer inserter, safety guarding Wrapper (2x) Manufacturer: Robopac Model: Genesis cube Year of manufacture: 2014 Additional features: Top sheet dispenser Processed pallet formats: Same as palletizer Ergonomic lifting device for loading the film roll for the top cover Ijdpow Iqknofx Abksik

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 103 kW (140,04 AG), kuro tipas: dyzelinas, spalva: geltonas, bendras svoris: 16 800 kg, kėlimo galia: 4 500 kg/m, kėlimo aukštis: 20 600 mm, padangos dydis: 445/65R 22.5, padang padangų: 60 procentas, sėdimų vietų skaičius: 1, Gamybos metai: 2007, veikimo valandos: 3 571 h, Įranga: borto kompiuteris, kabina, padėklų šakės, visų varančiųjų ratų pavara, Cab with front and rear window - Lifting capacity 4.5 t at 500 mm - Lifting height 20.60 m - Dieci carriage, width 1240 mm - Deutz 4-cylinder engine, 103 kW power - 4-wheel drive transmission - Maximum speed 40 km/h - 445/65R 22.5 Mitas tires - Hydraulic tilt corrector - 4 hydraulic outriggers - 360° rotating turret - Unladen weight 16,800 kg - Hetronic Nova XL Prop 5L radio remote control 3B6 programming for: Forks - Boom 2500 mm - Basket 300 kg - Boom 4500 mm - 3.8 t winch - 2.5 t winch Attachments: - 300 kg work basket for up to 3 persons - Forks 120x40x1200 mm - Jib with 1.2 t winch - 2.5 t winch - 4.5 t hook Iedpfsv E N Ipsx Abkjik

Sąlyga: naujas, A mobile workbench with quick, customisable height adjustment. The hydraulic unit is operated via a foot pedal, allowing for stepless adaptation to the desired working height. Various worktops can be mounted on the base frame; these are secured using four locking pins. The scissor lift table comes with a steel worktop and is equipped with four swivel castors, two of which feature locking brakes. Iijdpjvwf Rqsfx Abkok Technical data: Load capacity: 300 kg Lifting height: 610 mm Base height: 400 mm Frame dimensions: 970 x 590 mm Maximum height: 1010 mm Weight: 85 kg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, keliamoji galia: 6 000 kg, kėlimo aukštis: 30 000 mm, kuro tipas: dyzelinas, stiebo tipas: teleskopinis, šakių ilgis: 1 200 mm, pavaros tipas: Diesel, Rotating telescopic handler Mast type: Telescopic Technical condition: New Front tires type: Pneumatic Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires condition: 80 - 100% Description: The machine is UVV-inspected. A&M pallet fork carrier set including 1200mm pallet forks, 1500mm pallet fork carrier plate, and 5t lifting hook. 3rd valve, 4th valve, heater, road approval (StVZO), full cab, CE certificate, Iisdpfx Aow Eqdwobkok PEGASUS60.30St.V TÜV/Dekra approval 20 KM/H construction machinery axles with automatic 45% differential lock on the second axle additional platforms for stabilizers, pair of LED headlights on the fixed boom, 7-pin socket on upper structure, pre-installed car radio set with antenna and speakers, standard tool carrier plates, mechanically suspended Grammer seat with double joystick, right joystick with integrated FNR and electrical pre-installation for attachments with 3 movements, set of 18R22.5 XF MICHELIN off-road tires, semi-automatic climate control, removable front windshield guard for the cab, kit for driving with upper structure rotated 180°, boom vibration damping, integrated reversing camera with 7" display (not compatible with 7" monitor with digital camera on the telescopic boom), telematics kit (DTS), road headlights (front) with LED daytime running lights, cab with laminated glass windscreen, pre-installation for Woodcracker saw, three-sided personnel basket 120x240 cm, hydraulically extendable to 420 cm, load capacity 300 kg, pallet fork carrier plate including A&M lifting hook, width 1,_ pallet forks FEM4A, tines: 150x50 x 1.2m length, load capacity.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 050 mm, Y ašies eiga: 1 220 mm, Z ašies eigos atstumas: 100 mm, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 25 m/min, ašies skaičius: 16, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Skaitmeninė Pegasus-Cad programinė įranga Darbinė X ašies zona – 3050 mm Darbinė Y ašies zona – 1220 mm 2 darbo laukai Pakraunamas pakeliamasis stalas, sudedamas į krūvą Automatinė pakrovimo sistema Schmalz tipo Etikečių spausdinimo sistema su automatiniu aplikavimu ant pakrovimo stalo ATC, 3 ašių vertikalus elektros velenas, 13,2 kW, su automatiniu įrankių keitimu, ISO 30 Automatinė 16 pozicijų įrankių keitimo sistema - įrengta mašinos gale Automatinė įrankių keitimo karuselė, greitam keitimui Automatinė iškrovimo sistema su motorizuota juosta Automatinė darbo stalo valymo sistema Apsaugos ir saugos sistema – šviesos barjerai ir aptvėrimas Automatinė tepimo sistema 250 m3/h - 5,5 kW vakuuminis siurblys Kontaktinis telefonas: 0031634707163 Iedpfx Aboxx T R Djkjik Transportas, instaliavimas ir naudotojo apmokymas – derinama Danmar Machines BV Almelo

Sąlyga: naudotas, Gamybos metai: 2006, LINEA COMPLETA DI IMBOTTIGLIAMENTO KRONES 30.000 bph Prodotto: acqua naturale Velocità: 30.000 bph – PET da 1,5 lt Alimentatore di preforme - 2018 Modello: M.Tanner AG / Prologic Elevatore tappi Gassner - 2006 Produttore: Gassner Allineatore di preforme (parte della soffiatrici) - 2006 Monoblocco con soffiatrice, riempitrice e tappatore Soffiatrice - 2006 Marca: Krones Modello: Krones Contiform S20 Tipo: Rotativa Numero di cavità: 20 Riempitrice - 2006 Marca: Krones Modello: Krones Volumetic Direzione: Antioraria Numero valvole riempimento: 84 Tipo di riempimento: a flussometro (gravità) Tappatore: (parte del monoblocco) - 2006 Marca: Krones Numero teste: 18 Tipo di tappo: Alaska 3 Principles Distribuzione: pick & place Dispenser di azoto - 2006 Modello: Cryotech International Ispezionatrice controllo livello e tappo - 2006 Modello: Krones Checkmat Trasporto bottiglie - 2006 Modello: Krones Synco Tunnel di asciugatura - 2006 Marca: Europool Modello: TF-04 Etichettatrice - 2006 Marca: Krones Modello: Krones Etima Tipo: Rotativa Direzione rotazione: antioraria Tipo etichettatura: Rollfed Numero stazioni: 1 Numero teste: 18 Tipologia etichette applicabili: OPP Movimentazione piattelli: camma a lobi Regolazione teste: elettrica Ingresso americano e 2 uscite parallele Controllo presenza etichetta su nastro uscita Marcatore - 2015 Modello: Markem Smart Lase C350 Fardellatrice - 2006 Marca: OCME Modello: Vega N70/2 Lanciatore film Doppio ingresso Applicatore maniglie - 2006 Marca: Comag Modello: Decimo HM 100/2 Predisposto per confezioni: 3x2 Doppio ingresso Trasporto confezioni: Marca: Europool Pallettizzatore - 2006 Marca: OCME Modello: Pegasus M400 Tipologia: a strati Magazzino pallet Sistema interfalde Altezza massima lavorabile: 225 cm - pallet Dimensioni pallet lavorabile: 80 x 120 cm Iodovwcdzjpfx Abkjik Avvolgipallet - 2006 Marca: Bema Modello: Silkworm Turbo Altezza massima lavorabile: 225 cm - pallet Tipo di avvolgimento: tavola rotante Stesura foglio superiore Prestiro Etichettatrice pallet - 2020 Marca: Eidos Modello: 7P6ERLP

Sąlyga: naudotas, Funkcionalumas: nepatikrintas, įėjimo įtampa: 400 V, Duonos pjaustymo mašina Treif modelis: Pegasus Iisdpfx Abovkn E Dokek Nerūdijančio plieno konstrukcija Rankinis valdymas Pjovimo plotis: 4 - 14 mm Pjaustymo mašina Jungtis: 400V, 16A-CEE kištukas Matmenys apytiksliai: 1000 x 700 x 1200 mm (PlxAdxA) Naudota mašina Daug duonos pjaustymo mašinų sandėlyje!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys: - Talpa: 32 000 bph su 1,5 l - Formatai: 1500 ml - Pilstomas produktas: Vanduo ir nekarbonizuoti gėrimai - Pūstuvimas/Pildymas/Uždengimas: COMBI - Uždarymo sistema: 26,7 mm plastikiniai sraigtiniai kamšteliai Įranga komplekte: Preformų bunkeris – M. Tanner AG / Prologic Kamštelių bunkeris – Gassner Preformų orientatorius – M. Tanner AG Butelių pūtimo formavimo įrenginys – Krones Contiform S20 Pildymo stotis – Krones Volumetric Azoto dozatorius – Cryotech International Iiodpfxjxxbl No Abkok Uždarymo įrenginys – Krones Butelių tikrinimo sistema – Krones Checkmat Butelių konvejeriai – Krones SynCo Etiketavimo įrenginys – Krones Etima Kodavimo įrenginys – Markem SmartLase C350 Susitraukiančios plėvelės pakavimo mašina – Ocme Vega N70/2 Rankenėlių uždėjimo įrenginys – Comag/Decimo HM 100/2 Pakuočių konvejeriai – Europool Paletizatorius – Ocme Pegasus M400 Paletės apvyniojimo įrenginys – Bema Silkworm Turbo Paletės etikečių spausdintuvo/aplikatoriaus įrenginys – Bancale Eidos 7P6ERL

Sąlyga: naujas, Exactly the right choice for flexible applications. Our compact Pegasus lift table is highly maneuverable, can be used in a variety of ways, and thanks to the foot pedal, is easily adjustable to your ideal working height. The sturdy steel plate allows you to easily set down workpieces weighing up to 300 kg. If you require a different surface, it can also be easily fitted. Four robust polyamide swivel castors, two of which have parking brakes, provide optimal handling. A safety mechanism prevents the table from dropping unintentionally, ensuring the required level of safety. Ijdpfx Absvwfi Tekoik Workbench made of solid beech with dovetail joints offers the strongest connection, guaranteeing maximum stability and durability. The front vise measures 520 x 70 mm. The tail vise is equipped with a special spindle that ensures precise and stable operation. The tail vise features three dog holes, with an additional thirteen holes drilled into the benchtop. The 110 mm high front panel is equipped with two dog holes which, along with two holes in the tail vise, allow vertical clamping of workpieces. The workbench includes a drawer for storing tools. Along the rear of the bench, a tool trough is fitted, serving as a storage area for tools not currently in use, offcuts, or for quick tidying up. Technical Data: Lift Table: Load capacity: 300 kg Lift stroke: 610 mm Closed height: 400 mm Frame: 970 x 590 mm Total height: 1,010 mm Weight: 85 kg Workbench: Total length: 1,700 mm Worktop length: 1,485 mm Total width: 790 mm Worktop width: 620 mm Worktop thickness: 50 mm Weight: 90 kg

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 200 mm, Y ašies eiga: 1 600 mm, Z ašies eigos atstumas: 200 mm, greitas poslinkis X ašimi: 50 m/min, greitas poslinkis Y ašis: 50 m/min, greitasis eiga Z ašyje: 15 m/min, valdiklių gamintojas: LNC-Control, ruošinio ilgis (maks.): 3 200 mm, ruošinio plotis (maks.): 2 100 mm, ruošinio aukštis (maks.): 200 mm, ruošinio svoris (maks.): 1 500 kg, Įranga: sūkių greitis be galo kintamas, BudgeCaft is a manufacturer of high-quality CNC machines. We design, develop, assemble, and sell CNC machines for businesses and industrial manufacturers. BEST DEAL Transport, installation, machine commissioning, and CAD/CAM training are provided by Danmar Machines (languages: Dutch, English, French, Italian, or German). Additional cost depending on location. • Starter tool kit • ISO30 • ER32/ER40 collets • Vacuum pump • 9 kW ATC spindle CC Ijdpfxewc Uads Abkeik • 1 year online support/helpdesk CAD/software (English) • 12-month standard factory warranty Suitable for machining; wood, panel materials, acrylic, PVC, aluminium, foam, concrete plywood, plasterboard, rockwool, plastics, etc. - 9 kW ATC spindle ISO30 ER32/ER40 - LNC MW control system - Leadshine servo motors - Tool change magazine - Vacuum table - Vacuum pump - High-performance side channel blower, air pump - Pegasus CadCam software Custom configurations available Work area dimensions 1300 x 2600 mm €31,800 1600 x 3200 mm €37,500 2100 x 3200 mm €41,600 Linear tool magazine automatic changer: 10-12-16 position tool changer, automatic tool change during operation. Work area X-Axis: 2600-3200 mm Work area Y-Axis: 1300-1600-2100 mm Z-axis stroke: 200 mm Gantry construction: Yes Milling motor: 9 kW servo motor (ATC spindle) Speed: 1,000-24,000 rpm Travel speed X-Axis: 50 m/min Travel speed Y-Axis: 50 m/min Travel speed Z-Axis: 15 m/min Spindle interface: ISO30-ER32-ER40 Software: Pegasus PWoodEntry Vacuum pump: included