Pardavimai-Mobilus pirkti naudotą (817)

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, kuro tipas: elektrinis, tuščias svoris: 7 700 kg, kėlimo aukštis: 9 500 mm, Gamybos metai: 2021, statybinis aukštis: 1 869 mm, keliamoji galia: 7 000 kg, mašinos/transporto priemonės numeris: 0834, TECHNINĖ INFORMACIJA Keliamoji galia Krano keliamoji galia be Jib: 7 000 kg Krano keliamoji galia su Jib: 4 000 kg Krano keliamoji galia su gervė: 7 000 kg Šakių keliamoji galia: 3 000 kg Kėlimo aukštis Kėlimo aukštis be Jib: 9 100 mm Kėlimo aukštis su Jib: 9 500 mm Kėlimo aukštis su šakėmis: 8 800 mm ĮRANGOS DETALĖS Matmenys ir svoris Matmenys (I x P x A): 4 350 x 1 380 x 1 869 mm Nljdpfx Adjxxx Axsuji Svoris be krovinio: 7 700 kg Vairavimas: Per galinę ašį, vairo kampas -90°/+90° Baterija: 72 V - 640 Ah Variklis: 1 AC elektros variklis, 12 kW, 72 V Padangų dydis priekyje: 250-15" Padangų dydis gale: 21x8-9" KOMPLEKTACIJA Nuotolinio valdymo pultas Elektroninis apkrovos ribotuvas Nedėmėjančios padangos Jib + prailginimas Gervė Šakių laikiklis su šakėmis

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, siurbimo galia: 1 100 m³/val, neigiamas slėgis: 3 200 Pa, Welding Fume Extractor, Dust Collector, Self-Cleaning Pneumatic Negative Pressure Filter KEMPER. Suitable for welding, grinding, and all kinds of dry dusts. Self-cleaning welding fume filter with contamination-free dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation for the filtration of welding fumes and dusts with high concentration levels. Suitable for welding all types of carbon steel, low alloy and high alloy steels, as well as aluminum. Economical in operation due to long filter cartridge lifespan. Thanks to the IFA-W3 approval, the standard version filter can be used for welding high-alloy steels. Equipped with a Start-Stop system for automatic device activation and deactivation. Specifications: - Capacity: 1,100 m³/h - Max negative pressure: 3,200 Pa - Three-phase fan, 1.5 kW motor - Filtration area: 15 m² - Year of manufacture: 2021 - Cartridge filter with PTFE membrane - Filtration efficiency: >99.97% - Built-in delay timer in start-stop mode. - When connected to an optional start-stop sensor, the extraction delay after welding can be set from 5 to 60 seconds. Nlsdpfx Ajtq E Sisduei - Device in very good condition. Stock number – 0976

Sąlyga: naudotas, Naudotas nerūdijančio plieno laboratorinio dydžio mobilusis fluidinio sluoksnio džiovintuvas Glatt modelis GPCG-1. Džiovinimo kameros darbinis tūris iki 4,5 l. Darbinis slėgis 0,79 bar. Įrenginys komplektuojamas su dviem nerūdijančio plieno kūgiais – vienas padengimo procesui, antras – džiovinimui. Padengimo kūgis taip pat turi 4 nerūdijančio plieno sietus. Antgalis neįtrauktas. Elektrinės šildymo galios poreikis – 4 kW. Darbo temperatūros intervalas nuo 10 iki 140 °C. Džiovintuvas aprūpintas centrifuginiu ventiliatoriumi su 2,2 kW, 2850 aps./min, 220-230/380-400 V, 50 Hz elektros varikliu. Suspausto oro slėgis – 6 bar. Nodpfoxt Eiuox Adusli

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 900 h, Funkcionalumas: visiškai funkcionalus, HAAS Tyron 2000 XL 2.0 Year of manufacture: 2023 Approx. 900 operating hours - Crawler track drive - Scania diesel engine 294 kW / 400 HP – Emission stage V - Fine tool configuration 9/9/4 - Neodymium overband magnet, hydraulically height-adjustable - Generously sized tipping hopper - AWG permit in accordance with §52 The machine is suitable for use with waste wood, green waste, roots, and a wide variety of waste types... Nedjm H T R Eepfx Adueli

Sąlyga: naudotas, Gamybos metai: 2018, veikimo valandos: 6 800 h, Funkcionalumas: nepatikrintas, Basic Package AK560: Nodpfx Adjxx Rvkousli Central axle trailer chassis with 2 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting shoe Tyres 385/65 R22.5 Hydraulically adjustable support leg Splash guards (internal and lateral mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emission standard Load-dependent feed control incl. automatic scraper floor reversal Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing traction drive) when engine is off 24V electrical control system Separate control box at the rear of the machine Hydraulically folding fine-shredding basket (mesh size between 30 - 280 mm, gradation upon request) incl. tailgate Scraper floor with 32 slats Complete radio remote control Drive unit preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Optional Equipment: Special paint in DB6841 MB-Trac Green Hydraulic drive unit Fuel tank 600 l Fine-shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drives for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper for side walls Impact plate with impact bar and additional row of teeth Delivery date by arrangement

Gamybos metai: 2016, veikimo valandos: 6 100 h, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Terex Pegson Premiertrak 400 2016 metai 6100 darbo valandų Įvadas 1100x700 mm Terex Pegson Metrotrak 900x600 2016 metai 6100 darbo valandų Įvadas 1100x700 mm Variklis Scania DC09 CSS intervalas nuo 0-65 iki 0-150 mm Našumas 150-250 t/h, priklausomai nuo medžiagos Svoris 45 t Nodpjxvcduefx Adusli Su šoniniu konvejeriu Su viršinių magnetu Su juostine svarstyklėmis Įranga puikios techninės būklės, paruošta darbui kaip NAUJA.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, padėklų keitiklis: vadovas, Samzon Mobile Pallet Turner 2000-15 yra aprūpintas naujausios kartos mechaniniais ir elektroniniais komponentais. Traukos įrenginys turi 2,2 kW galios elektrinį variklį, o hidraulinę sistemą valdo 3 kW variklis su integruotu siurbliu. Įrenginys sukurtas taip, kad galėtų tiesiogiai privažiuoti prie keistinos paletės – dažniausiai keičiant medinę paletę į plastikinę. Įrenginys važiuoja tiesiai prie paletės, šakės pakyla po palete ir virš produkto. Jei produktas gali būti apverstas 180 laipsnių ant naujos paletės, nauja paletė dedama ant produkto prieš apvertimą. Tuomet produktas grąžinamas į horizontalią padėtį, o paletė rankiniu būdu apsukama 180 laipsnių ir užrakinama užraktu. Apvertus paletę, ją galima vėl nuleisti iki grindų lygio – jau padėtą ant naujos paletės. Servo vairavimas – lengvas vairo valdymas. Maksimalus atidarymas iki 2000 mm / minimalus – 550 mm Maksimali apkrova iki 1500 kg 24V - 210Ah Sprendimai pagal kliento poreikius. Nedpfx Asw U R D Iedujli

Sąlyga: geras (naudotas), Mobilus žvaigždinis sietas su iškrovimo transporteriais ir kablio keltuvu Nedpfx Adsxywa Ssusli

Sąlyga: naudotas, Gamybos metai: 2010, Mobilus matavimo šarnyrinis matavimo įtaisas matavimo prietaisas Gamintojas: Zett Mess Tipas: AMPG 2400 Precision Pagaminimo metai: 2010 – nenaudotas Nlsdpfxswu E D Rs Aduji Matavimo Ø: 2.400 mm

Gamybos metai: 2022, veikimo valandos: 150 h, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gremac e2+ / Naujas įrenginys apie 150 darbo valandų Pagaminimo metai: 2022 - 10 + 15 mm sietai - Būgno ilgis: 3,0 m - Būgno skersmuo: 1,0 m - Honda benzininis generatorius Nsdpfx Adjin Rg Hjueli - Pilnai elektrinė eksploatacija galima per 16A jungtį - Leistinas bendras svoris: 3,5 t Labai kompaktiška ir itin našų būgninė sijojimo mašina jūsų užduotims...

Sąlyga: geras (naudotas), Gamybos metai: 2022, veikimo valandos: 2 100 h, Funkcionalumas: visiškai funkcionalus, Įranga: Nodpfxjwnfwqs Adueli Bazinis paketas Inventhor Type 6 Load-Sensing sistema 500 litrų degalų bakas Išilginio konvejerio juostos ilgis – 2.900 mm, plotis – 800 mm Centriniu būdu išdėstyti slydimo bėgiai 24 V elektros valdymo sistema – papildoma elektrinė pompa, leidžianti valdyti šias funkcijas, kai variklis išjungtas: „Galinę juostą kelti/žeminti/lankstyti, grėblio sklendę atidaryti/uždaryti, grėblį atidaryti/uždaryti, nuleidžiamą bunkerį kelti/žeminti“ Pilna radijo nuotolinio valdymo sistema Didelės šoninės GFK techninės priežiūros durys Patogiai aptarnaujama variklio erdvė LED apšvietimo paketas: variklio skyrius ir galinė dalis Hidrauliškai reversuojamas ventiliatoriaus ratas Trys pusės krovinio apsauga Sulankstomas bunkeris Gesintuvas Aptarnavimo kopėčios Įrankių dėžė Garso įspėjimas paleidžiant Doppstadt telematikos sistema Dažymas: RAL2011 gili oranžinė Papildoma įranga: 310 kW pavaros sistema – EV 3 ašių vilkimo važiuoklė Smulkinimo sistema Size L 600/4 - 30 Z Papildoma hidraulinė jungtis 35–80 l/min Hidraulinė pavara Galinė konvejerio juosta 4,9 m Virš juostos yra neodimio magnetas Rėmas virš juostos magnetui

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2016, Demo mašina Parduodamas mūsų Felder RL-200 švaraus oro ištraukimo įrenginys iš mūsų demonstracinės salės, maksimalus oro srautas 2300 m³/h. Įrenginys yra kaip naujas, patikrintas ir paruoštas mūsų specialistų. Techniniai duomenys: - H3 dulkių testavimas - Ištraukimo jungtis Ø 200 mm - Automatinis drožlių kratymas - Plieninis ventiliatoriaus ratas - Maksimalus oro srautas 2300 m³/h - Su briketavimo presu FBP 60 (50-70 kg/val.) - Pagaminimo metai: 2016 Nlsdpfexxkr Ssx Adusi Švaraus oro įrenginį galima apžiūrėti A-5431 Kuchl mūsų darbo valandomis. Galimas tarpinis pardavimas! Susiję terminai: ištraukimas, ištraukimo įrenginys, švaraus oro įrenginys, švarus oras, RL, briketavimo presas, briketavimas Nuoroda: R-A0117

Sąlyga: naudotas, For sale: Schuko Vacomat 200P, year of manufacture 1999, from a well-maintained workshop operation. The unit runs flawlessly and is ready for immediate use – ideal for woodworking shops, joineries, or CNC workstations with high chip and dust generation. 🔧 Technical specifications: Motor power: 3.7 kW (400 V three-phase) Airflow: approx. 2,500 m³/h Vacuum: approx. 2,800 Pa Filter area: approx. 14.5 m² Suction nozzle: Ø 200 mm Chip collection containers: 3 × 160 l, emptied individually Filter cleaning: pneumatic (compressed air pulse) Dimensions (L × W × H): approx. 2,600 × 900 × 2,100 mm Weight: approx. 350 kg Sound pressure level: approx. 75 dB(A) ✅ Condition: Fully functional, immediately operational Nodpfexn Nu Dex Adusli Serviced regularly Normal wear and tear for its age 📦 Features: Pneumatic filter cleaning – ensures consistently high suction performance Large filter area for efficient extraction Three separate collection containers – easy emptying Mobile & compact – flexible use in the workshop Proven, durable Schuko quality “Made in Germany” 📍 Location: Haldensleben 🚚 Collection preferred, shipment or delivery available by arrangement

Gamybos metai: 2017, veikimo valandos: 3 600 h, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, naud. Terra Select T50 apie 3600 darbo valandų - JCB dyzelinis variklis 55 kW/75 AG - Bunkerio tūris 6,0 m³ Nlsdpsqpgtbofx Aduji - Būgno ilgis 4 500 mm - Būgno skersmuo 2 000 mm - ilgi išvežimo konvejeriai - Sijojimo būgnas pagal pasirinkimą Mašina tinka nuo lengvų iki sunkių medžiagų dėl masyvios bunkerio pavaros sistemos...

Sąlyga: naudotas, Gamybos metai: 2019, veikimo valandos: 6 680 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 19 000 kg, galia: 390 kW (530,25 AG), Equipment: Basic Package AK560 Eco-Power: Central axle trailer chassis with 2 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. insertion shoe Tyres 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emission standard Load-dependent material feed control incl. automatic scraper floor reversal Fuel tank 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip "Streusel" Centrally arranged lubrication strips Electric pump for actuating the cylinder functions (e.g. lifting/lowering of support leg and opening/closing of rear basket, folding/unfolding of rear conveyor, disengagement of travel drive) when engine is at a standstill 24 V electro-control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 slats Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Additional Equipment: Hydraulic drive Drawbar extension 400 mm Fuel tank 600 l Auxiliary hydraulic coupling 20 l/min Flail tip C1 "Bear Paw" with carbide Fine shredding basket Impact plate with impact bar Rear conveyor 4 m Separate drive for feed roller/scraper floor ("Twin Drive") Reinforcement plates on the feed hopper Njdpsw Swpfofx Aduoli

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Parduodamas Felder AF-22 ištraukimo įrenginys, kurio maksimalus oro srautas siekia 3100 m³/val. Įrenginys yra labai geros būklės, mūsų kvalifikuotas personalas jį patikrino ir paruošė naudojimui. Techniniai duomenys: - Ištraukimo galia: 3100 m³/val. - Maksimalus vakuumas: 2510 Pa - Ištraukimo jungtis: Ø 160 mm - Skiedrų talpa: 2x200 litrų - Įeina dulkių filtras su atmušimo mechanizmu - Pagaminimo metai: 2024 - Variklio galia: 3 kW Įrenginys yra A-5431 Kuchl mieste ir gali būti apžiūrėtas bet kuriuo mūsų darbo metu. Pasiliekame teisę parduoti įrenginį anksčiau! Nsdpexxiy Usfx Adujli Susiję terminai: ištraukimo įrenginys, ištraukimas, filtras, kasetinis filtras Nuoroda: R-E28WO

Sąlyga: geras (naudotas), Gamybos metai: 2010, Grynoji kaina: 4.250 € Pagaminimo metai: 2010 Nodpfowkfxaex Adusli Techninė informacija pateikta nuotraukose. Gaunate sąskaitą su nurodytu PVM. Siuntimas per ekspediją galimas. Kaina taikoma iš sandėlio Haldensleben.

Sąlyga: naudotas, Gamybos metai: 2021, veikimo valandos: 3 300 h, Funkcionalumas: visiškai funkcionalus, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Tri-axle semi-trailer chassis, 80 km/h road approval Braking system including ABS and lighting in accordance with EC directive Tyres 385/65 R22.5 Permissible gross weight 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm complies with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control including automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned lubrication strips Nledpfxexx Tigo Adusi Electric pump for actuating cylinder functions (e.g., raising/lowering support legs, opening/closing rear basket, folding/unfolding rear conveyor belt, disengaging travel drive) when engine is off 24 V electrical control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket Multimesh (mesh sizes between 30 - 280 mm, increments on request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, with antimagnetic centre section Underslung conveyor: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water supply connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates at the feed hopper (made of wear-resistant steel) on both sides for sidewall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic travel drive Scraper floor chain lubrication Neodymium overband magnet Frame for overband magnet Central lubrication system Engine compartment guard plate Lighting package: engine compartment and rear conveyor Watering system Delivery date according to agreement Available from 06/2026

Sąlyga: naudotas, Gamybos metai: 2022, veikimo valandos: 2 380 h, Funkcionalumas: visiškai funkcionalus, Base Package AK 315: Central axle trailer chassis with 2 axles, 80 km/h road approval Braking system incl. EBS and lighting in accordance with EC directive Tyres 385/65 R22.5 50 mm EC towing eye incl. socket shoe Hydraulically adjustable support leg Splash protection (internal and side-mounted mudguards) Permissible gross weight 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emission standard Load-dependent control of material feed incl. automatic scraper floor reversal Hydraulically foldable green waste grate with rear tailgate Impact plate with teeth Fuel tank 300 litres Feed roller: length 1,420 mm, diameter 510 mm, with mounted tooth segments Two-row flail drum with 16 free-swinging cast steel flail holders and replaceable flail tips and 28 fixed ripping teeth Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump to operate cylinder functions (e.g. raising/lowering support leg and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive) when engine is off 24-V electronic control system Separate control box at the rear of the machine Scraper floor with 29 strips Chain drive feed roller and scraper floor Advanced radio remote control with 2 foot pedals Nledpjxx Sdpsfx Aduoi Acoustic start-up warning sound Rear conveyor 6 m, 1,500 mm wide with anti-magnetic centre section Reinforcement plates (Hardox) on both sides of the feed hopper for side walls (loading edge) Preparation for drive unit Fire extinguisher Doppstadt telematics system Paint: RAL2011 deep orange Optional Equipment: Hydraulic drive unit Extended radio remote control with foot pedal Flail tips “Bear Paw” Fine shredding basket Water spraying system Lighting package: engine compartment and rear conveyor Delivery date by arrangement.

Sąlyga: naudotas, Gamybos metai: 2023, veikimo valandos: 119 h, Funkcionalumas: visiškai funkcionalus, Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 litres Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged lubrication strips 24 V electrical control – additional electric pump to operate the following functions when the engine is at a standstill: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED light package: engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional Equipment: Drive train 260 kW – EV 3-axle drawbar undercarriage unit Shredding system Size L – 20 teeth Nlsdpfxjxx Sbns Aduji Additional hydraulic connection 35–80 l/min Hydraulic drive Hopper extension 350 mm, water spray system on both sides Rear conveyor 7 m Over-band magnet – neodymium Frame for over-band magnet 7 m Delivery date by arrangement

Sąlyga: naudotas, Gamybos metai: 2018, veikimo valandos: 6 031 h, Funkcionalumas: visiškai funkcionalus, Basic Package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system incl. ABS and lighting according to EC Directive 50 mm EC towing eye, including removable shoe Hydraulically adjustable support legs at the front on both sides and at the rear right Splash guards (inner and side fenders) Tyres: 435/50 R19.5 Permissible total weight: 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, complies with emission standard EUROMOT TIER IV Final Hydraulically reversible fan at water and oil cooler Complete engine unit swivels out Fuel tank: 300 litres Filling hopper capacity: 5.0 m³ Stone grid preparation Hydraulically foldable side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically foldable rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyor Emergency stop switches at side and rear conveyor Load-dependent material feed from feed floor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper conveyor speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, fold in/out rear conveyor, fold in/out side conveyor, bend side conveyor and load control +/-, enable/disable automatic mode From the machine's control panel: fold in/out side conveyor Hydraulically foldable cleaning brush with individual brush elements and spring tines Centrally arranged wear strips 24 V electrical control system Rear underrun protection Side underrun protection at the front (reinforced version) and on both sides at the rear Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paint finish: RAL2011 deep orange Nodpfexx R Rhsx Adujli Basic version without screening drum Additional equipment: Proportional divider at rear conveyor Delivery date to be arranged

Sąlyga: naudotas, Gamybos metai: 2024, veikimo valandos: 630 h, Funkcionalumas: visiškai funkcionalus, Basic package AK565 Plus: MTU diesel engine 6R1300, 390 kW at 2,000 rpm, EUROMOT V compliant Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. EBS and lighting according to EC directive 50 mm EC towing eye incl. plug-in shoe Tyres: 435/50 R 19.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted mudguards) Gross vehicle weight rating: 22,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, compliant with EUROMOT V emissions standard Exhaust stream directed upwards Load-dependent feed control incl. automatic reverse of scraper floor Fuel tank 600 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: Flail tip “Streusel plus” Impact plate with teeth Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering support leg, opening/closing rear basket, folding/retracting rear conveyor, disengaging drive) when engine is off 24V electric control system Separate control cabinet at the rear of the machine Hydraulically folding fine-shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations upon request) including one-piece tailgate Scraper floor with 32 slats Separate drive for feed roller / scraper floor – "Twin Drive" Rear conveyor with anti-magnetic centre section – belt length 6,000 mm, belt width 1,800 mm, discharge height 4.2 m – lowerable Lower conveyor – belt length 1,400 mm, belt width 1,750 mm Extended radio remote control with 2 foot switches Preparation for travel drive Reinforcing plates in the feed hopper (Hardox material) on both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic travel drive Additional hydraulic connection, 20 l/min Flail tips "Bear Paw" Impact plate with impact strip and tooth row Neodymium magnetic pulley incl. chute Nsdjxx R Akopfx Aduoli NEODYM overband magnet for rear conveyor Frame for overband magnet Moistening unit LED light package: engine compartment and rear conveyor Delivery date to be agreed

Sąlyga: naudotas, Gamybos metai: 2013, veikimo valandos: 4 000 h, Funkcionalumas: visiškai funkcionalus, Basic package AK435: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive Nsdjxx Ryijpfx Aduoli 50 mm EC towing eye including slip-on shoe Tyres 385/65 R22.5 Hydraulically adjustable support legs Splash guards (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, complies with EUROMOT IIIB emission standard Load-dependent control of material feed including automatic reversing scraper floor Fuel tank 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raising/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when the engine is off 24 V electrical control system Separate control cabinet at the rear of the machine Hydraulically foldable fine shredding basket (mesh size between 30 - 280 mm, gradations on request) including rear flap Scraper floor with 32 strips Radio remote control incl. transmitter, receiver, 230 V charger, 12/24 V charging cable, 2 batteries, transmitter holder. The following functions can be controlled: Engine: stop, engine speed: +/-, scraper floor: stop/reverse/forward, drive: stop/reverse/forward/disengage, rear basket: open, rear conveyor/lower conveyor: on/off, support leg: raise/lower Preparation for drive system Acoustic start-up warning Paint: 2-component paint RAL2011 deep orange Additional equipment: Hydraulic drive Fuel tank 600 l "Bear Paw" flail tips Fine shredding basket 4 m rear conveyor, belt width 1800 mm Moistening unit Separate drive for feed roller/scraper floor Reinforcement plates on feed hopper Delivery date by arrangement

Sąlyga: naudotas, Gamybos metai: 2023, veikimo valandos: 2 798 h, Funkcionalumas: visiškai funkcionalus, Basic Package AK 640 SA: Semi-trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directives Tyres: 385/65 R22.5 Gross vehicle weight: 32,000 kg Hydraulically adjustable support legs Splash guards (mudguards inside and on the sides) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm compliant with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel plus" flail tip Impact plate with teeth Centrally positioned lubrication strips Electric pump for operating the cylinder functions (e.g. raising/lowering the support legs and opening/closing the rear basket, folding in/out rear conveyor, disengaging travel drive) when the engine is stationary 24 V electric control Separate control box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations upon request) incl. one-piece rear door Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, including anti-magnetic center section Undercarriage conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment guard plate (material: Hardox) Moistening system for external water connection Scraper floor with 71 slats Wear protection in the drum area Reinforcement plates at the feed hopper (wear-resistant steel) on both sides for the side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Nedpfx Adoxx Rrroujli Optional Equipment: Hydraulic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package for scraper floor and feed "Bear Paw" flail tips Delivery date to be arranged Available from 04/2026

Sąlyga: naudotas, Gamybos metai: 2023, veikimo valandos: 1 400 h, Funkcionalumas: visiškai funkcionalus, Basic Package Inventhor 6: Load-sensing system 500-liter fuel tank Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24 V electrical control system – additional electric pump allows the following functions to be operated when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control system Large side GRP service doors Service-friendly engine compartment LED light package: engine compartment and rear section Hydraulically reversible fan Three-sided loading protection Folding hopper Nljdpfx Aoxx Rlfjduei Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painted in RAL2011 deep orange Optional Equipment: 260 kW - EV powertrain 400-mm track drive system Size L shredding system – 20 teeth Size L limiter Auxiliary hydraulic connection, 35 - 80 l/min 7-m rear conveyor Overband magnet, neodymium Frame for 7-m overband magnet Hopper extension 350 mm, water spray system both sides Delivery date by arrangement