Okuma Lr 15 M pirkti naudotą (194)

Sąlyga: geras (naudotas), Gamybos metai: 2006, Used lathe from OKUMA - Model: LT200-M TwinStar Ksdpfsv S Su Sox Abksfa - Year of manufacture: 2006 - including bar feeder - including chip conveyor

Sąlyga: geras (naudotas), Gamybos metai: 2007, x-axis travel: 762 mm y-axis travel: 460 mm z-axis travel: 460 mm Control: OSP-P200M Spindle speed range: 50–15,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Main drive motor: 22 kW Machine weight approx.: 7,200 kg Required space approx.: 2,850 x 2,810 x 2,750 mm Accessories/Equipment: - Tool magazine for 32 tools - Chip conveyor - Internal coolant supply - Standard filtration system Kjdpjvq Rhzefx Abksfa

Sąlyga: geras (naudotas), X ašies eiga: 798 mm, Z ašies eigos atstumas: 358 mm, Max. turning diameter: 665 mm X-axis travel: 798 mm Z-axis travel: 358 mm Kodjwxb Eropfx Abkjfa Spindle bore: 360 mm Spindle speed: 500 rpm Spindle power: 45 kW Tailstock quill taper: 6 MT Tailstock quill stroke: 230 mm Tailstock quill diameter: 150 mm Length: 8,100 mm Width: 2,750 mm Height: 2,100 mm Weight: 13,000 kg

Gamybos metai: 2001, Sąlyga: geras (naudotas), CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L Year of manufacture: 2001 2-axis CNC lathe with robotic loading Kodpfxjk Hz Iws Abkefa Description: Two-axis X-Z lathe for short workpieces, equipped with a robotic workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindle speed: 4500 rpm With coolant system and chip conveyor

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 23 082 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 114599, tekėjimo ilgis: 541 mm, tekėjimo skersmuo: 210 mm, X ašies eiga: 192 mm, Y ašies eiga: 50 mm, Z ašies eigos atstumas: 700 mm, TECHNICAL DETAILS Machining dimensions Turning length: 541 mm Turning diameter: 210 mm Axes and traverse paths X-axis travel: 192 mm Y-axis travel: 50 mm Z-axis travel: 700 mm Spindle Spindle speed: 6,000 rpm Spindle motor power: 11 kW Feed X-axis feed rate: 30 m/min Z-axis feed rate: 40 m/min MACHINE DETAILS Electrical data Supply voltage: 400 V Phases: 3 P Frequency: 50 Hz Operating hours Kfjdpow Ekrujfx Abkea Total on-time: 92,265 h Spindle run-time: 23,082 h Total weight: 8,000 kg EQUIPMENT Documentation/Manual Chip conveyor Note: The machine will remain powered until the end of the auction, after which it will be dismantled.

Gamybos metai: 1999, Sąlyga: geras (naudotas), Swing diameter 580 mm Turning length 1,500 mm X/Z travel 568/1,660 mm Y-axis C-axis Spindle speed 3,200 rpm Driven tools 3,000 rpm Kjdpfsiicllox Abkofa

Sąlyga: naudotas, Horizontal machining centre, 6 pallets, OKUMA MA40 HAT 6P, OSP U100M CNC, 6 pallets of 400 mm x 400 mm, maximum load per pallet 400 kg, maximum workpiece dimensions 600 x 710 mm, spindle BT40 with through-spindle coolant, 4th axis indexable in 1° steps, tool changer with 100 positions. 200 tool holders available. Travel X = 560 mm, Y = 610 mm, Z = 560 mm, rapid traverse 40 m/min. Installed and powered on at Mimu Machine Tools (Italy). X travel: 560 mm Kfodpfx Abst Ek Slokea Number of pallets: 6 Pallet size: 400 x 400 mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 762 mm, Y ašies eiga: 460 mm, Z ašies eigos atstumas: 460 mm, valdiklio modelis: OSP-P200M, veleno greitis (maks.): 15 000 aps./min, įrankių magazino lizdų skaičius: 32, TECHNICAL DETAILS X-axis travel: 762 mm y-axis travel: 460 mm z-axis travel: 460 mm CNC control: OSP-P200M Tool magazine: 32 tools Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Kfjdpev Umt Uofx Abksa Speed range: 50 – 15,000 rpm Main drive motor: 22 kW MACHINE DETAILS Machine dimensions: approx. 2,850 × 2,810 × 2,750 mm Machine weight: approx. 7,200 kg FEATURES - Chip conveyor - Internal coolant supply - Standard filtration system

Sąlyga: geras (naudotas), Gamybos metai: 2007, tekėjimo ilgis: 1 065 mm, tekėjimo skersmuo: 470 mm, Chip conveyor SMW 315 3-jaw chuck 2 x radial live tool holders 2 x axial live tool holders Spindle bore: 80 mm BMT tooling system Tool measuring probe Spindle hours: 6,960 / 6,270 operating hours Max. turning diameter: 470 mm X-axis travel: 260 mm Z-axis travel: 1,065 mm Spindle bore: 80 mm Spindle speed: 4,200 rpm Spindle power: 30 kW Tool changer: 12-station BMT tool system Driven tool speed: 6,000 rpm Driven tool power: 7.1 kW Length: 3,310 mm Width: 1,900 mm Ksdpfjwq Rpwjx Abkofa Height: 1,970 mm Weight: 6,100 kg

Sąlyga: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0093, X ašies eiga: 1 000 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 810 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, padavimo ilgis X ašis: 20 mm, padavimo eiga Y ašimi: 20 mm, padavimo ilgis Z ašis: 20 mm, valdiklio modelis: OSP7000M, ruošinio skersmuo (maks.): 1 000 mm, ruošinio svoris (maks.): 1 200 kg, stalo plotis: 630 mm, ašies variklio galia: 28 000 W, veleno nosis: BT50, ašies skaičius: 1, įrankių magazino lizdų skaičius: 60, įrankio ilgis: 600 mm, įrankio skersmuo: 240 mm, įrankio svoris: 25 g, įėjimo įtampa: 200 V, įvesties srovės tipas: trifazis, Įranga: drožlių transporteris, Parduodama OKUMA MX-60HB horizontalioji apdirbimo centras, 1997 m. geroje būklėje, idealiai tinka tiksliam apdirbimui. Ši tvirta ir patikima staklė buvo reguliariai prižiūrima ir paruošta integravimui į jūsų gamybos cechą. Pagrindinės savybės: Gamintojas: OKUMA Modelis: MX-60HB Metai: 1997 Tipas: Horizontalus apdirbimo centras CNC valdymas: OKUMA OSP 7000 Techniniai duomenys: Stalas: 630 x 630 mm Eigos (X/Y/Z): 1000 / 800 / 810 mm Stalo apkrova: 1200 kg Velenas: Sukimosi greitis: 50 - 8000 aps./min Galia: 22 kW Įrankių keitiklis: 60 įrankių (BT50) Staklių svoris: apie 14 000 kg Komplektacijoje: Aušinimo sistema Kfsdpfsxg Rfhsx Abkja HP 60Bar Knoll siurblys Drožlių transporteris Techninė dokumentacija Būklė: Staklės gerame bendrame stovyje Atliktas reguliarus aptarnavimas Galima apžiūra ir išbandymas pagal susitarimą Parduodama tokios būklės, be transportavimo ir montavimo išlaidų.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 107963, X ašies eiga: 1 050 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 460 mm, valdiklio modelis: OSP U100, veleno greitis (maks.): 15 000 aps./min, TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 560 mm Travel Z-axis: 460 mm Table Max. workpiece dimensions: 1,300 x 560 mm Distance from table surface to spindle nose: 150 – 610 mm Max. table load: 900 kg Kfsdewh Tfvspfx Abkoa Spindle Spindle speed: 15,000 rpm Spindle power: 22 / 18.5 kW Through-spindle coolant: 20 bar Feed Rates Rapid traverse X-/Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Working feed X-/Y-/Z-axis: 32 m/min Tool Magazine Tool capacity: 20 tools Tool holder: BT 40 Tool selection: Memory Random MACHINE DETAILS Footprint: 2,510 x 3,100 mm Machine height: 2,476 mm Machine weight: 7,500 kg EQUIPMENT - Chip conveyor

Gamybos metai: 2008, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Machine is provided loaded free onto truck. TECHNICAL DETAILS Turning length over bed / saddle: 670 / 480 mm Maximum turning length: 750 mm Maximum turning diameter: 430 mm Maximum bar diameter: 102 mm Spindle speed: 42 - 4200 rpm Travel path X / Z: 300 / 840 mm Rapid traverse: 30 / 25 m/min Spindle power cont. / 30 min: 30 / 22 kW Spindle nose: ASA 11 Tool turret: 12 stations Tool size: 25 x 25 mm / 40 mm Tool speed: 45 / 6000 rpm MACHINE DETAILS Weight: 6700 kg Dimensions: 4500 x 1900 x 2320 mm EQUIPMENT Kjdpfx Ajpgrzcsbkjfa Chip conveyor Tool presetting automatic door opening High-pressure pump, 6 bar Driven tools and various static tools (see photo)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, * Okuma LB 3000 MY. * Equipment value included: €20,000–24,000. * 4-axis lathe. * Fully independent and programmable tailstock in Z-axis movement and clamping via M-codes. * 12-position turret, all stations powered. * C axis. * Y axis. * Main spindle motor integrated, 18.5 / 22 kW. * Driven tool motor 5.5 kW. * Motor start torque 620 Nm. * Integrated motor, no belts or gear ranges. * Main spindle nose size A2-8. * Tailstock taper MT5. * Bar capacity 75 mm. * Kitagawa B-210 spindle chuck. * Box way guides on all axes. * Main spindle speed 4,200 rpm. * Driven tool speed 4,000 rpm. * Swing diameter 520 mm. * Max. machining diameter 380 mm. * Max. machining length 1050 mm. * Oil chiller for spindle. * IGF OSP P200-L conversational automatic programming system. * Automatic load control and tool consumption monitor. Kfjdpfex Ab I Sox Abksa * Parameterized automatic tool collision avoidance system. * Tool life management and monitoring. * Rapid traverse speed 20 and 25 m/min on X and Z axes. * Turret index time 0.2 seconds. * Renishaw automatic tool measurement arm. * Communication ports: USB, PCMCIA card, and RS232. * Dual foot pedal for chuck and tailstock opening and closing. * Side-mounted hinged belt chip conveyor. * Complete set of external and internal static tool holders. * Complete set of axial and radial driven tool holders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operating manuals. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery unless sold.

Sąlyga: naudotas, TECHNICAL DATA Kodpfx Abouhbnnjkofa - Number of spindles: 2 - Number of axes: 4 MAIN SPINDLE - Spindle nose: A2-8 - Spindle speed: 3,000 [rpm] - Max. bar diameter: 80 [mm] - Max. machinable diameter: 300 [mm] - Max. swing over bed: 520 [mm] - Minimum C-axis resolution: 0.001 [degree] SUB-SPINDLE - Spindle speed: 6,000 [rpm] - Max. bar diameter: 53 [mm] - Minimum C-axis resolution: 0.001 [degree] - Travel: 520 [mm] TURRET - Number of positions: 12 - Travel X/Z: 230 / 460 [mm] - Driven tools speed: 4,500 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 22.5 [kVA] WEIGHT AND DIMENSIONS - Space requirement: 3,050 x 1,860 [mm] - Machine height: 1,850 [mm] - Machine weight: 5,500 [kg] ACCESSORIES - Control: OSP-P300L-R - Coolant tank * with high-pressure pump - Chip conveyor - Parts catcher - Parts conveyor belt - Bar loader: Top Automation FU352 - Fire extinguishing system * * NB: Functional capability not guaranteed. Inspection by a qualified company engaged by the buyer is advised.

Sąlyga: geras (naudotas), Gamybos metai: 2002, Offered here is a 9-axis CNC turning center from the manufacturer Okuma. The machine is in good condition and can be inspected and tested by arrangement. Make: Okuma Model: MacTurn 250 W Year of manufacture: 2002 Control: OSP-U100L Kedpfxeq Rf Ubo Abkjfa

Sąlyga: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 560 mm, Y ašies eiga: 610 mm, Z ašies eigos atstumas: 625 mm, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 60 m/min, valdiklių gamintojas: Okuma, valdiklio modelis: OSP-E100M, ruošinio ilgis (maks.): 600 mm, ruošinio plotis (maks.): 710 mm, ruošinio svoris (maks.): 400 kg, bendras aukštis: 2 760 mm, bendras ilgis: 4 535 mm, bendras plotis: 2 415 mm, stalo plotis: 400 mm, stalo ilgis: 400 mm, stalo apkrova: 400 kg, bendras svoris: 11 500 kg, veleno greitis (maks.): 10 000 aps./min, atstumas nuo stalo centro iki veleno galo: 710 mm, ašies variklio galia: 15 000 W, veleno nosis: BT40, ašies skaičius: 1, įrankių magazino lizdų skaičius: 40, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: drožlių transporteris, sūkių greitis be galo kintamas, Okuma Space Center MA400HA Horizontal-Bearbeitungszentrum Maschinentyp: CNC-Horizontal-Bearbeitungszentrum Baujahr: 2004 Steuerung: OSP-E100M Achsen: 4 Anzahl Paletten: 2 Zustand: Gut Ausstattung: Cromar Späneförderer Kühlschmiermittel-Filtrationssystem Technische Daten: Paletten: 2 Palettengröße: 400 x 400 mm Verfahrweg X-Achse: 560 mm Verfahrweg Y-Achse: 610 mm Verfahrweg Z-Achse: 625 mm Ksdpfewcd Evex Abkofa Verfahrweg B-Achse: 360° Eilgang: 60 m/min Spindelmitte zu Palettenoberkante: 50 – 660 mm Spindelnase bis Palettenmitte: 85 – 710 mm Max. Palettenbeladung: 400 kg Max. Werkstückabmessungen: 600 x 710 mm Werkzeugplätze: 40 Spindelaufnahme: BT40 Spindelleistung: 15 kW Spindeldrehzahl: 10.000 U/min Maschinenabmessungen: 4.535 x 2.415 x 2.760 mm Maschinengewicht: 11.500 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Reference: LT-2501 Manufacturer: Okuma Model: LB4000EX-MC x 750 Control: Okuma OSP-P200L Year of manufacture: 2007 Keyboard / Software Language: International / Spanish Country of origin: Japan Technical Specifications: Capacity: Swing over bed: Ø 670 mm Swing over carriage: Ø 480 mm Distance between centers: 770 mm Maximum turning diameter: Ø 430 mm Maximum turning length: 750 mm Maximum bar capacity: 90 mm (Modification required) Main Spindle: Spindle diameter: Ø 160 mm Spindle nose (type): JIS A2-11 Spindle bore diameter: Ø 112 mm Speed ranges: 2 ranges, infinitely variable Kfjdpfx Aew Dvb Sobksa Spindle speed: 30 – 3,000 rpm Motor: 37 / 30 kW (30 min / continuous) Motor type: PREX Motor Tailstock: Rotating center: MT 5 Stroke (W-axis): 780 mm Rapid traverse: 12,000 mm/min Maximum thrust: 7,500 N Z Axis: Travel: 840 mm Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 30,000 mm/min X Axis: Travel: 300 mm Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 25,000 mm/min C Axis: Controlled angle: 360° (0.001° increment) Turret: Type: M-V12 NC Number of tool stations: 12 x BMT40 (L or M) Indexing time: 0.2 sec/position Tool dimensions: External turning: 25 x 25 mm Internal turning: Ø 40 mm Driven tool: Rotational speed: 45 – 6,000 rpm Speed ranges: 1 range, infinitely variable Motor: 7.5 / 4.3 kW (25 min / continuous) Motor type: PREX Motor Dimensions and weights: Machine height: 1,955 mm Floor space required: 3,050 x 1,900 mm Machine weight: 6,300 kg Included options: Quick-change chuck (3 jaws, Ø 315 mm) SCHUNK ROTA THW plus 315-104 CROMAR chip conveyor Assisted programming (ONE Touch IGF Advanced) Rigid tapping DNC-T1

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 817, Komplette Kaltumformungslinie (bestehend aus 3 Maschinen) Einkopf-Zweistufen-Kaltstauchautomat (One Die Two Blow Header) Max. Draht-Abschnittdurchmesser: 25 mm Abschnittlänge: 300 mm Schaftlänge unterhalb des Kopfes: 260 mm Extrusionsmaschine Abschneidemaschine Kjdstqu U Topfx Abkefa

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, tekėjimo ilgis: 3 000 mm, tekėjimo skersmuo: 1 050 mm, veleno greitis (maks.): 1 500 aps./min, įvorės išorinis skersmuo: 375 mm, 多機能加工機 OKUMA MULTUS B750 C3000 2017年式 OSP-P300SA 15インチチャック 最大加工径:1050mm 最大加工長:3000mm Kfsdpfx Abswi Ezrskoa