Of 2200 Eb Plus pirkti naudotą (69 231)

Sąlyga: naudotas, Gamybos metai: 2023, bendras ilgis: 3 650 mm, • 8x batteries, 215-260Ah • 1x socket in the platform basket • Residual current circuit breaker (RCCB) • Generator • Built-in battery charger • Maximum ground pressure 14.0 kg/cm² • Travel speed (lowered): 6.0 km/h • Turning radius (outer): 2.60 m • Turning radius (inner): 0.75 m • Gradeability: 30% • Working height: 12.65 m • Working outreach (standard platform): 6.05 m • Articulation height: 7.12 m • Slew angle (non-continuous rotation): 345° • Platform capacity: 1,200 kg • Basket arm – total length: 4.14 m • Basket arm – vertical working range: 120° (+60° / –60°) • Rear entry with sliding latch • Fully proportional joystick for drive and lift functions with integrated rocker for thumb steering • 2 mini-joysticks provide proportional control of lift and lowering for mast and basket arm • 4.14 m articulated boom • Function activation with enlarged LCD status display • Load monitoring system • AC power outlet in the work platform • Large tool tray • Direct, electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power saving function when idle • Power reduction in case of deep discharge • Onboard diagnostics system with integrated display • Automatic rear wheel brakes • Curved protective covers made of polyester • Motorized basket rotation • High-performance steel-roller telescopic mast, 345° rotation • Chain slack detection Ijdpfx Afsxd Hx Sewja • 3° tilt alarm with warning light • Frame width: 1.20 m • Lifting and tie-down lugs • Key-secured selector switch for ground controls • Battery level indicator • Operating hours counter • Horn • Travel direction system • Harness anchor points • Xenon rotating beacon • Manual emergency lowering • Passive pothole protection • Tyres (non-marking): 457 x 178 mm • Electrical system: 48V DC • Batteries (deep cycle): 4 x 48V – 260 Ah • Battery charger onboard, 110 V / 230 V HF • Drive motors: 2 AC motors • Electric (pump) motor: 3.5 kW, 48 V DC • Hydraulic system: hydraulic tank 15 l

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 12200991016, sukimosi greitis (min.): 24 000 aps./min, bendras svoris: 1 635 kg, įrankio svoris: 2 900 g, įėjimo įtampa: 400 V, For economical and efficient machining of aluminium profiles, plastics, and thin-walled steel profiles All machining processes such as milling, drilling, and tapping are performed on a stationary profile, thereby protecting the profile surface Better work results through the use of intelligent control technology Fast positioning of the machining unit at speeds of up to 60 m/min thanks to dynamic servo drives Tapping without a compensating chuck Automatic clamp detection and positioning Automatic tool magazine with four tool shelves (without tools) Modern 3-axis control Ergonomic operation thanks to a modern inclined bed No need for axis referencing movement due to systems based on absolute encoders Collision avoidance due to automatic clamp detection and positioning Power-Torque milling spindle motor with closed-loop speed control for short spindle start-up and braking times Certified, drive-integrated safety functions Low power consumption through intelligent control technology Higher energy efficiency due to the linking of axis drives between circuits Emergency power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program input using eluCam on the operator panel, even during processing Remote online maintenance Machine equipment 8 kW air-cooled milling spindle, S1 Operator protection cabin Four horizontal pneumatic clamps for material fixation Material stop on the left side HSK-F63 tool holder Minimal quantity lubrication High-performance coolant Manual control panel Iodpfx Ajwgmyqofwja Depth template Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotary angle head HSK-F63 for two tools Green-line cooling unit for the control cabinet with reduced energy consumption Barcode reader Protective cabin, optionally with full enclosure Four clamps as standard. Extension up to eight clamps possible Right material reference stop for positioning elements for overlength machining Additional stop for overlength machining on the left side Double-sided length measurement Double clamp and additional accessories on request 18.5" Panel PC, i5 processor 21.6" Panel PC, i7 processor Note holder Soundproof enclosure Chip disposal using chip trays

Sąlyga: labai geros būklės (naudotas), Išorinis Ø: 200 mm Gręžinys: 52 mm Ijdpfx Afsxazt Aowja Maks. apsukos: 4500 aps./min

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 669481, Format: 32 x 46 cm, conventional dampening system, in heavily used condition. Counter reading: 59 million. Impression cylinder with slight surface damages, see photos. Numerous additional equipment: numbering ink unit (three rubber rollers should be recoated), perforators, cross perforators, Leibinger numbering units longitudinal and transverse, manuals. Ijdpfx Afevgbaaswea

Sąlyga: naudotas, Linear actuator, linear gearbox, lifting gearbox, spindle drive - Unused: from warehouse clearance - Travel distance: 550 mm - Motor mount: Ø 19 mm - Dimensions: 13/130/H1000 mm - Shipping dimensions: 200/200/H1100 mm Ijdpsb A Sh Sjfx Afwoa - Quantity: 3x linear bearings available - Price: per piece - Weight: 14 kg/piece

Sąlyga: naudotas, kuro tipas: elektrinis, Condition: Used machine Year of manufacture: 2022 Operating hours: on request Maximum working height: 12.65 m Outreach: 6.05 m Overall length: 3.65 m Overall width: 1.99 m Overall height: 1.20 m Maximum load capacity: 200 kg Weight: 4,900 kg Key features: • Steel platform, 0.70 m x 1.05 m (L x W) • Rear entry with sliding latch • Fully proportional joystick for drive and lift functions with integrated rocker for thumb steering • 2 mini-joysticks enable proportional control of mast and jib lift/lower movements • 4.14 m articulated jib • Function activation with enlarged LCD status display • Load monitoring system • AC power outlet in work basket • Large tool tray • Direct, electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power-saving mode when idle • Function limiter in case of deep discharge • On-board diagnostics system with integrated display • Automatic rear wheel brakes • Curved polyester protective covers • Motorized platform rotation • High-performance steel-roller telescopic mast, swivelable by 345° • Chain slack detection • 3° tilt alarm with warning light • Chassis width: 1.20 m • Lifting and lashing eyes • Key-secured selector switch for ground controls • Battery charge indicator • Hour meter • Horn • Directional travel system • Harness anchor points • Xenon beacon • Manual emergency lowering • Passive pothole protection Isdpfjrgqpzox Afwja _____ Leasing/financing available through leasing partners. The offer is non-binding and subject to prior sale. We are happy to demonstrate the machine and create a customized offer for you. The machine has CE certification and documentation available. No liability for input errors. Errors and interim sale excepted.

Sąlyga: naujas, Gamybos metai: 2023, bendras ilgis: 3 700 mm, • 8x batteries, 215-260Ah • 1x socket in the platform basket • Residual current circuit breaker (RCCB) • Generator • Built-in battery charger • Maximum ground pressure 14.0 kg/cm² • Travel speed (lowered): 6.0 km/h • Turning radius (outer): 2.60 m • Turning radius (inner): 0.75 m • Gradeability: 30% • Working height: 12.65 m • Working outreach (standard platform): 6.05 m • Articulation height: 7.12 m • Slew angle (non-continuous rotation): 345° • Platform capacity: 1,200 kg • Basket arm – total length: 4.14 m • Basket arm – vertical working range: 120° (+60° / –60°) • Rear entry with sliding latch • Fully proportional joystick for drive and lift functions with integrated rocker for thumb steering • 2 mini-joysticks provide proportional control of lift and lowering for mast and basket arm • 4.14 m articulated boom • Function activation with enlarged LCD status display • Load monitoring system • AC power outlet in the work platform • Large tool tray • Direct, electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power saving function when idle • Power reduction in case of deep discharge Isdpfoxd Hrfex Afwoa • Onboard diagnostics system with integrated display • Automatic rear wheel brakes • Curved protective covers made of polyester • Motorized basket rotation • High-performance steel-roller telescopic mast, 345° rotation • Chain slack detection • 3° tilt alarm with warning light • Frame width: 1.20 m • Lifting and tie-down lugs • Key-secured selector switch for ground controls • Battery level indicator • Operating hours counter • Horn • Travel direction system • Harness anchor points • Xenon rotating beacon • Manual emergency lowering • Passive pothole protection • Tyres (non-marking): 457 x 178 mm • Electrical system: 48V DC • Batteries (deep cycle): 4 x 48V – 260 Ah • Battery charger onboard, 110 V / 230 V HF • Drive motors: 2 AC motors • Electric (pump) motor: 3.5 kW, 48 V DC • Hydraulic system: hydraulic tank 15 l

Sąlyga: naudotas, Sliding support, linear actuator, clamping plate, aggregate carrier, machined surface, welding table -Spare part from: a Wotan table-type boring mill -Compatible with: clamping plate ID 21339 -Top width: 80 mm -Bottom width: 270 mm -Length: 2200 mm -Height: 215 mm -Quantity: 2 pieces available -Price: complete for both Ijdped R Exgofx Afwsa -Transport dimensions: 2200/600/H300 mm -Weight: 556 kg

Sąlyga: naudotas, Gamybos metai: 2023, bendras ilgis: 3 650 mm, • 8x batteries, 215-260Ah • 1x socket in the platform basket • Residual current circuit breaker (RCCB) • Generator • Built-in battery charger Iedpfxjxd E R Hs Afwja • Maximum ground pressure 14.0 kg/cm² • Travel speed (lowered): 6.0 km/h • Turning radius (outer): 2.60 m • Turning radius (inner): 0.75 m • Gradeability: 30% • Working height: 12.65 m • Working outreach (standard platform): 6.05 m • Articulation height: 7.12 m • Slew angle (non-continuous rotation): 345° • Platform capacity: 1,200 kg • Basket arm – total length: 4.14 m • Basket arm – vertical working range: 120° (+60° / –60°) • Rear entry with sliding latch • Fully proportional joystick for drive and lift functions with integrated rocker for thumb steering • 2 mini-joysticks provide proportional control of lift and lowering for mast and basket arm • 4.14 m articulated boom • Function activation with enlarged LCD status display • Load monitoring system • AC power outlet in the work platform • Large tool tray • Direct, electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power saving function when idle • Power reduction in case of deep discharge • Onboard diagnostics system with integrated display • Automatic rear wheel brakes • Curved protective covers made of polyester • Motorized basket rotation • High-performance steel-roller telescopic mast, 345° rotation • Chain slack detection • 3° tilt alarm with warning light • Frame width: 1.20 m • Lifting and tie-down lugs • Key-secured selector switch for ground controls • Battery level indicator • Operating hours counter • Horn • Travel direction system • Harness anchor points • Xenon rotating beacon • Manual emergency lowering • Passive pothole protection • Tyres (non-marking): 457 x 178 mm • Electrical system: 48V DC • Batteries (deep cycle): 4 x 48V – 260 Ah • Battery charger onboard, 110 V / 230 V HF • Drive motors: 2 AC motors • Electric (pump) motor: 3.5 kW, 48 V DC • Hydraulic system: hydraulic tank 15 l

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Schmalz vakuuminis kėlimo įrenginys, pagamintas 2018 m., keliamoji galia 25 kg, pakabinamas prie lubų (apytikriai 8.000 mm x 6.000 mm), komplekte po 2 vakuuminius siurblius ir 2 JumboFlex keltuvus.\nIšmontavimui yra autokrautuvas. Ijdpfx Asxy Acrjfwea

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07/01/7824, Mielai suteiksime techninę informaciją. - Nesubalansuotumas paslinktas +50° - Antrojo pavaros sukimo greitis per didelis mūsų sunkiems ruošiniams Iodpfx Afoxtc Alowea - Stabdžių svirtis sugedusi, staklės stabdo pačios - Ekrano mastelis paslinktas į kairę - Yra tik vienas balansavimo laikiklis

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 12412802, tuščias svoris: 540 kg, didžiausias leistinas svoris: 760 kg, bendras svoris: 1 300 kg, ašių konfigūracija: 1 ašis, krovimo vietos ilgis: 3 150 mm, krovinių skyriaus plotis: 1 640 mm, krovos erdvės aukštis: 2 370 mm, Gamybos metai: 2025,

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2004, veikimo valandos: 4 762 h, Liebherr L 524 Wheel Loader ONLY 4,762 HOURS Manufacturer: Liebherr-Werk Bischofshofen GmbH (Austria) Model / Type: L 524 Vehicle Identification Number (VIN): VAT074487B010144 Year of manufacture: 2004 Iedpfx Aswxy Nisfwsa Very good condition CENTRAL LUBRICATION SYSTEM ONLY 4,762 HOURS Engine power: 81 kW / 110 HP Maximum speed: 33 km/h Gross vehicle weight: 12,700 kg Permissible axle load: Front axle: 6,500 kg Rear axle: 7,000 kg

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 10 825 h, Įranga: visų varančiųjų ratų pavara, Reguliuojamas strėlės pasukimas, kotas apie 2450 mm, S. W. sistema SW48, giluminis kaušas 800 mm, griebtuvo ir kūjo įrenginio parengtis, centrinė tepimo sistema, oro kondicionierius, galinio vaizdo kamera, paskutinė apžiūra atlikta prie 9970 motovalandų, gera būklė, transporto priemonė gali būti su reklaminėmis plėvelėmis ir/ar užrašais. Mūsų pasiūlymas paprastai teikiamas be naujos techninės apžiūros. Jei pageidaujate naujos techninės apžiūros, mielai pateiksime partnerių servisų pasiūlymą! Transporto priemonė gali būti su reklaminėmis plėvelėmis ir/ar užrašais. Taikomos mūsų bendrosios pristatymo ir apmokėjimo sąlygos. Iedoxnhimspfx Afwsa Mielai pateiksime finansavimo arba išperkamosios nuomos pasiūlymą šiam objektui. Susisiekite su mumis!

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures comprehensive edge processing at all stages, as it comes equipped with all the components required for your needs: pre-milling unit, end trimming saw, milling unit, radius scraping blade, corner rounding unit, surface scraper, and cleaning station. For even greater flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and glue application tailored to the workpiece for edge materials up to 3 mm; pre-milling unit (including DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change pot preparation including glue drain feature, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version), corner rounding cutter, radius scraper, surface scraper (including pneumatic lift), cleaning station, robust chain feed, ball-bearing mounted double pressure roller, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change preparation corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray unit for separating agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spraying unit F5/27. Nesting for milling and radius scraper Isdslht Hwopfx Afwoa F5/30. Pneumatic 3-point adjustment (radius, bevel, and flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Sąlyga: labai geros būklės (naudotas), Rofin Type: PowerLine Pico 532 - 10 CombiLine Basic WT VLM – Visual Laser Marker VLM stands for an innovative, flexible marking software used with Rofin laser systems. VLM follows the WYSIWYG principle and provides the flexibility of a powerful yet easy-to-use software package. With VLM, it is possible to apply a wide variety of markings such as matrix codes, barcodes, and serial numbers. Depending on the material, even the smallest markings are possible. The innovative software ensures reliable marking of both flat and curved surfaces, and on-the-fly applications are also supported. For layout import, common formats such as DXF are supported, as well as PDF optionally. Technical Data - Laser: Laser Head Wavelength: 532 nm Power: approx. 3W at 400 kHz Pulse frequency: 200-800 kHz Beam quality: TEM00 Energy per pulse: 7.5 μJ at 400 kHz, 3.5 μJ at 800 kHz Peak power: 7.5 kW at 400 kHz Dimensions: approx. 450 mm x 168 mm x 235 mm (L x W x H) Weight: approx. 14 kg (with standard Galvo RM10) 19" Power Supply Unit Dimensions: 2HE x 19" x 350 mm (H x W x D) Weight: approx. 20 kg Cooling: integrated air cooling Supply voltage: 115 - 240 V +/-10%, 50 Hz / 60 Hz Power consumption: approx. 800 W Ambient temperature: 15°-35°C, non-condensing Air throughput: 80 m³/h PC Mini-ITX Removable 250 GB SSD drive Iedpfx Aetz Rk Hsfwja Software min. VLM 5.2 Windows Embedded Standard 7 Other 19" front panel can be removed Positioning aid Adjustable 3-point support The following components were selected in deviation from the standard scope of delivery: Ρ255-532 Lens f = 255 mm: 532 nm Marking field: 180 mm x 180 mm S10-532 Galvo head unit S10: 532 nm Galvo head S10 including selected lens, mounting kit for optics, and protective glass or protective glass slider. Size: approx. 165 mm x 118 mm x 147 mm (L x W x H) Weight: approx. 4.4 kg CombiLine Basic (V2): The CombiLine Basic is a user-friendly system of laser class 1 (per EN 60825-1), which, through the extensive use of preconfigured functional modules, enables optimal adaptation to customer-specific requirements. The frame contains all control components and functional elements. An aluminum plate with a standard hole pattern serves as the basis for accommodating standardized or customer-specific workpiece holders. The fully automatic, electrically operated door enables loading and unloading of workpieces. The large viewing window provides continuous monitoring of the processing area. A programmable Z-axis, including control and motor, is included as standard for vertical focus adjustment. This adjustment is performed automatically to match the marking program specifications. Technical Data: Dimensions: approx. 1200 mm x 1750 mm x 800 mm (W x H x D) Door opening: approx. 560 mm x 680 mm (W x H) Weight: max. 380 kg Connection: 230V +/-10%: 1/N/PE Power: max. power consumption 3 kVA Monitor: 15" TFT with touch function Z-axis: max. 300 mm travel Workpiece: max. weight: 20 kg (incl. holding fixture) max. 690 x 490 x 293 mm (W x L x H)

Sąlyga: naudotas, Gamybos metai: 2006, Blokinė juostinė pjūklas / juostinis pjūklas rąstams MEBOR HTZ 1200 Profesionalus Didžiausias rąsto skersmuo: 120 cm Maks. pjovimo ilgis: 18 metrų (originalus pjovimo ilgis 13 metrų) Ritinių skersmuo: 1200 mm Staklių plotis: apie 2800 mm Staklių aukštis: apie 2000 mm Ijdpsxxlqpofx Afwja Variklio galia: 45 kW Bendra galia: 55 kW Pagaminimo metai: 2006 su įpjovimo pjūklu su hidrauliniais spaustuvais su rąstų vartytuvu / grandininiu vartytuvu su konvejeriu lentų nuėmimui Vieta: Austrija, netoli Ried im Innkreis

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, matavimo diapazonas X ašis: 500 mm, matavimo diapazonas Y ašis: 500 mm, matavimo diapazonas Z ašis: 300 mm, Įranga: apšvietimas, dokumentacija / vadovas, AIM coordinate measuring centers are the technological successors to the globally used Mahr multisensor coordinate measuring machines. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Ijdpjg Ewk Refx Afwoa Weight: approx. 1,200 kg Max. workpiece weight (on glass plate): approx. 40 kg Accuracies: U1=1.9 + L/200 U2=2.4 + L/150 U3=2.9 + L/100 (L = measuring length in mm) Higher precision upon request Traversing speed: 200 mm/s Acceleration: 400 mm/s Scale resolution: 0.0001 mm Multisensor sensor unit (MSH): optical / tactile / laser Including: - High-precision USB camera with 2-stage zoom and telecentric beam path - PTL01 TTL point laser, high-precision, telecentrically coupled - Renishaw TP200 integrated tactile probing system, optionally expandable - Quad-Light LED power ring light, programmable incident light - LED power transmitted light - Nikon precision objective 5x (optional: 3x, 10x, 20x, 50x) C-Mount technology - Calibration standard with factory calibration certificate, consisting of glass plate "circle", calibration sphere, and gauge ring - State-of-the-art PT200 CNC control system in a robust, industrial-grade control cabinet - PCI-BUS system for fast internal data transfer in real-time operation - Pull-out 19" controller rack for optimum service access - Modular controller concept open for future upgrades and retrofits - Service-optimized controller design for quick access and reduced service times - Integrated 64-bit broadband bus technology with real-time data transfer - 4-channel online temperature compensation (prewired, on board) - Active safety technology for drives, light management, and sensor systems - Online remote connection for remote maintenance and online system check - LS circuit breakers for fast troubleshooting during service - Firmware adaptation for volumetric 3D full error compensation Including powerful OptiCheck3D 5.0 software. Commissioning, training, and start-up support (programming) can be booked as an additional package!

Sąlyga: naudotas, Gamybos metai: 2018, veikimo valandos: 8 463 h, Įranga: visų varančiųjų ratų pavara,

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1990, Wide Belt Sander WEBER OFZ-2-1350 Working width: 1350 mm Number of heads: 2 1: Calibration roller with 18.5 kW motor 2: Pad unit with 11 kW motor Electrically actuated sanding pad Cleaning brush Infinitely variable feed speed adjustment Isdpsgm Tqwefx Afwoa Machine weight: 2700 kg

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with all the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure workpieces are perfectly prepared for edge banding. Standard features include a jointing unit (up to 2 mm cutting depth), an overhead quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 – 10 m/min feed speed Edge Banding Machine F2 next Iodpfx Afoi Am U Dowsa With PLC control (including touchscreen) and glue application specifically calibrated to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tools) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change system including glue drainage device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and replaceable profile/flush trimming cutters (combination setup), robust chain feed, double roller pressure unit with ball bearings, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 mobile base F2/30 pneumatic 3-point adjustment (radius, bevel, and flush milling)

Gamybos metai: 2014, Sąlyga: labai geros būklės (naudotas), Professional pneumatic cleaning cabin with dust extraction system. Applications include power plants, cement and gypsum factories, mills, and companies involved in mixing processes, including the chemical industry, as well as the metallurgical sector. Dust can have a significantly negative impact on personnel health in these environments. By using cleaning cabins, the transfer of dust and hazardous substances to areas such as restrooms and changing rooms is effectively prevented. The cabin provides staff with a simple option to clean themselves during work hours, e.g., before morning and lunch breaks, and at the end of a shift. Isdpfx Afshm E S Aewsa Extraction system made in EX version Year of manufacture: 2014 Filtration area: 16 m² Capacity: 2,500 m³/h Vacuum: 2,400 Pa The device is in very good condition.

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander Iedjlht Hzepfx Afwoa With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately Available - This Hebrock evergreen offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a profile milling unit and a multi-radius scraper, Hebrock sets new standards in perfect edge processing of various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Ijdji Am Ukopfx Afwja Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Features: • Hebrock K 36 – 15 m/min • K36 Edge Banding Machine • With PLC control (incl. 15" touchscreen), hot-melt adhesive provision directly onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm milling depth, maintenance-free coated glue pot with quick-change preparation incl. glue discharge device, high-frequency double-motor end trim saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with pneumatic adjustment and quick-change insert milling cutter (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift-out device), buffing station, robust chain drive, double-roller upper pressure with ball bearings, aggregate viewing windows on both machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge banding on workpieces up to 60 mm thick • 36/08/1 Quick-change corner rounding unit • 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 • 36/09/1 Multi-radius scraper • 36/24/1 Separator spraying device • 36/24/2 Cleaning agent spraying device • 36/25 Edge protective spray • 36/27 Nesting (1x milling station + 1x radius scraper) • 36/30 Pneumatic 3-point adjustment • 36/30/1 Multitool for HF milling station (R2/R1/chamfer) • 36/45 Axis package for motorized adjustment of panel/edge thickness and jointing depth settings Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 ensures comprehensive edge processing in every step, as it comes equipped with all the components necessary to meet your requirements: jointer, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even greater flexibility towards achieving the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and hot-melt adhesive application onto the workpiece for edging materials up to 3 mm; jointer (including diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change facility including glue discharge device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window from the machine’s rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding unit Isdsi Anadepfx Afwoa F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: ex stock 54634 Bitburg Available calendar weeks: 4/2024