Obliavimo Peilių Velenas pirkti naudotą (2 739)

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 260 mm, obliavimo aukštis: 160 mm, ašies skersmuo: 50 mm, obliavimo plotis: 260 mm, darbinio aukščio: 160 mm, padavimo variklio galia: 4 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, įvesties srovės tipas: trifazis, ašies skaičius: 5, galia: 39 kW (53,03 AG), dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Unimat 1000 su grioveliu stalu Darbinis plotis: 260 mm Darbinis aukštis: 160 mm Cedpfxoxk U Tks Ahverh 5 velenų Veleno skersmuo: 50 mm Velenų išdėstymas: 1-Apačioje (7,5 kW) 7000 aps./min 2-Dešinė (7,5 kW) 7000 aps./min 3-Kairė (7,5 kW) 7000 aps./min 4-Viršuje (7,5 kW) 7000 aps./min 5-Apačioje (5,5 kW) 7000 aps./min Padavimo galia: 4 kW / 6–36 m/min Vienas pavaromas volas prie išėjimo ant stalo.

Sąlyga: labai geros būklės (naudotas), Keturių pusių obliavimo staklės WEINIG UNIMAT 23 7/25 Techniniai duomenys: Maks. obliavimo plotis: 240 mm Maks. obliavimo aukštis: 130 mm Veleno skersmuo: 40 mm Velenų kiekis: 8 Velenų eiliškumas: - apačia - dešinė - kairė - dešinė - viršus - viršus - apačia - universalus Kiekvienas velenas su atskiru varikliu Viršutinių guminių traukiančių ritinėlių kiekis: 6 Apatinių plieninių traukiančių ritinėlių kiekis: 5 Viršutinių plieninių traukiančių ritinėlių kiekis: 6 Ištraukimo antgalio skersmuo: 8x140 mm Sklandus padavimo reguliavimas Padavimas kardanu Slėgis: 6 atm Elektrinis korpuso pakėlimas Rankinė stalviršio tepimo pompa Maitinimas: 400 V Bendroji galia: 50 kW Codjxc D Diepfx Ahverh Bendri matmenys: Ilgis: 6430 mm Plotis: 1800 mm Aukštis: 1700 mm

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 530 mm, obliavimo peilių skaičius: 4, Įranga: variklio stabdis, Houfek Planer R 530 - 400V/50Hz, 5.5 kW (7.5 HP), Working Width 530 mm 1.1 Motor: 5.5 kW (7.5 HP), Tersa cutter block 1.2 Total table length: 3100 mm 1.3 Guide fence dimensions: 1300 x 150 mm with tilting auxiliary fence 1.4 Precision-ground table Cedpfx Aheu Rnqqsvsrh 1.5 Overhead control panel with ELGO Z60 digital display Electronic depth adjustment 0 - 7 mm Tilting angle of auxiliary fence 0°- 45° with digital readout Infeed table inclination adjustment (straight or concave jointing) 1.6 "SUVAMATIC" cutter block guard 1.7 4-blade cutter block D=120 mm 1.8 Automatic star-delta motor starter 1.9 Electromagnetic brake 1.10 Extraction port with outlet D=150 mm 1.11 Knife setting gauge 1.12 Voltage: 400V/50Hz 1.13 Standard packaging in PE film 1.14 Machine built according to CE electrical and safety standards

Sąlyga: naudotas, Gamybos metai: 2015, bendras ilgis: 1 820 mm, bendras aukštis: 1 200 mm, bendras plotis: 850 mm, - Min. obliavimo plotis [mm]: 10 - Maks. obliavimo plotis [mm]: 400 - Įleidimo stalo ilgis [mm]: 880 - Išleidimo stalo ilgis [mm]: 880 - Bendras stalų ilgis [mm]: 1820 Crjdpfexhcg Hex Ahveh - Darbo stalo plotis [mm]: 410 - Obliavimo veleno skersmuo [mm]: 100 - Peilių kiekis [vnt.]: 4 - Aukščio reguliavimo cilindrų kiekis [vnt.]: 1 - Volelių stale [vnt.]: 2 - Siurbimo jungties skersmuo [mm]: 110 - Aukščio reguliavimas: Rankinis - Gamybos metai: 2015 - Dokumentacija prieinama: Ne - Serijos numeris: 14053701 - Įtampa [V]: 400 - Transportavimo matmenys: 1820mm x 850mm x 1200mm (ilgis x plotis x aukštis) - Transporto paketų kiekis [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir priėmimas pagal mainus galimi visai pramoninei įrangai Glenn Smeets

Sąlyga: labai geros būklės (naudotas), maks. obliavimo plotis: 770 mm maks. ruošinio aukštis: 200 mm Cjdpfxew Tv Szs Ahvsrh viršutinis velenas: 4 peiliai, 7,5 kW apatinis velenas: 4 peiliai, 5,5 kW stalviršis reguliuojamas elektriškai

Sąlyga: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Horizon Dreimesser-Trimmer zu verkaufen! Die Maschine befindet sich in der Produktion und ist in sehr gutem Zustand. Eine Besichtigung und Testlauf sind möglich. Sofort verfügbar! Modell: HT-101 Baujahr: 2010 Seriennummer: 326003 Beschreibung: - Trimm-Absaugung TB-100 - Übergabeführung HCG-100 * Vollautomatischer Dreimesser-Trimmer * Kann inline oder offline eingesetzt werden * Automatische Einrichtung für verschiedene Buchgrößen und präzise Schneidegenauigkeit * Auftragswechsel erfolgen einfach und schnell über das Farb-LCD-Touchscreen-Display. Beim Wechsel des HT-101 sind nur wenige Teile zu tauschen * Messerhöhe und Schnitttiefe lassen sich bequem über das Farb-LCD-Touchscreen einstellen TECHNISCHE DATEN: * Max. unbeschnittene Buchgröße: 410 x 320 mm * Min. unbeschnittene Buchgröße: 148 x 105 mm * Max. beschnittene Buchgröße: 366 x 300 mm * Min. beschnittene Buchgröße: 145 x 103 mm * Trimm-Breite: Vorderschnitt: 45 mm / Kopf-Fuß: 30 mm * Trimm-Dicke: max. 100 mm / min. 5 mm (min. Buchdicke 2 mm) * Produktionsgeschwindigkeit: 400 bis 1.600 Zyklen/Stunde Cjdpfjway N Ssx Ahvsrh

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Darbinis plotis: 230 mm, darbinis aukštis: 160 mm, velenų skaičius: 5, veleno diametras: 50 mm, veleno galia: 4x 5,5 kW / 2x 11 kW, padavimas: 24 m/min, padavimo stalo ilgis: 3000 mm, vertikalaus veleno ašinė eiga: 80 mm, horizontalaus veleno ašinė eiga: 45 mm. Bendras pajungimo galingumas: 126 kW, oro poreikis: 8400–9600 m³/val., staklių matmenys (X/Y/Z): apie 3500 mm / 2000 mm / 1800 mm, svoris: apie 3500 kg. Į komplektą įeina Weinig EM-11 įstūmimo įrenginys ir tinkamas ištraukimo paskirstytuvas. Dokumentacija yra. Galima apžiūrėti vietoje. Credpfeu Damdsx Ahvoh

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Typ: 2034 Nr. 374, veleno tvirtinimas: MK 2, Angular milling spindle for Deckel FP1 and FP2, D70, D80 mm, suitable for Deckel milling machines FP1 and FP2. The angular milling spindle is 360-degree rotatable. The spindle is pre-owned but in excellent condition. This is an original Deckel angular milling spindle, Type: 2034, Serial No. 374. The spindle was used exclusively for precision work. Technical data for the angular milling spindle: - Tool milling spindle with MK2 tool holder - For collets type: Morse taper 2 (with internal thread) The spindle comes with a reducing sleeve. Reducing sleeve: (for FP1) - Outer diameter = 80 mm - Inner diameter = 70 mm (A reducing sleeve is not required for FP2) Weight: - Spindle: 6.5 kg - Reducing sleeve: 0.8 kg - Total: 7.3 kg Price: ex works Payment: - Cash upon collection or payment in advance Delivery: - Shipping via DHL parcel service is possible - Collection in person is possible Terms of delivery: - Delivery according to Machineseeker standard contract for used machinery - Standard sales contract for used machines from Machineseeker - A standard contract can be downloaded from Machineseeker Codpfxsxk T Hie Ahvsrh Availability: - Immediately available.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 530 mm, Houfek Planer Thicknesser SC 530 Standard Configuration: Motor 5.5 kW (7.5 HP) Total length of the planer tables SC 530 - 2350 mm Simultaneously tiltable jointer tables Fence dimensions 1300x150 mm Fence tilting angle 0°- 45° Thicknesser table length - 1000 mm Manual thicknesser table lift Mechanical numeric indication of table position Four-point support for thicknesser table Segmented infeed pressure bar Grooved infeed roller Outfeed roller Min./max. workpiece thickness 3 - 250 mm 4-knife cutterblock D=120 mm Automatic star-delta motor start Feed speeds 6/12 m/min Electromagnetic brake Voltage 400V/50Hz Standard packing in PE foil Machine built according to CE power and safety regulations Additional equipment (installed on this machine): Motor 7.5 kW (10 HP) for SC 530 Segmented grooved feed roller Tiltable cutterblock guard Tiltable auxiliary fence Motorised thicknesser table lift with two-speed motor Electronic table position measurement with digital display “Tersa” type cutterblock for 530 mm SC Planed jointer table Planed thicknesser table Crsdpfx Ahjwvaqzevsh

Sąlyga: naudotas, KÖLLE DH 63 storio obliavimo staklės 4 peilių velenas Obliavimo plotis 630 mm Obliavimo aukštis 220 mm 2 stalo slankikliai Credpfxsxf Tqqo Ahvsh Variklio galia 5,5 kW Ištraukimo jungties skersmuo 160 mm

Sąlyga: naudotas, Gamybos metai: 2000, Darbinis plotis: 430 mm Bendras stalo ilgis: 2850 mm Padavimo stalo ilgis: 1570 mm Stalo aukštis: 1280 mm Peilio veleno skersmuo: 120 mm Apsisukimai: 500 aps./min. 4x obliavimo peiliai Maks. drožlių nuėmimas: 8 mm Pasukamas ribotuvas 0-45°: 1200 x 160 mm Variklis: 3 kW Ištraukimo gaubto skersmuo: 140 mm Svoris: apie 650 kg Išmatavimai: 2900 x 800 x 860 mm Sandėliavimo vieta: tiekėjas Crjdpfsw Sy Hmjx Ahvsh

Sąlyga: naudotas, Gamybos metai: 1998, darbinis plotis: 230 mm, obliavimo aukštis: 120 mm, obliavimo plotis: 230 mm, darbinio aukščio: 120 mm, bendras plotis: 1 800 mm, bendras aukštis: 1 900 mm, bendras ilgis: 3 500 mm, bendras svoris: 3 000 kg, padavimo variklio galia: 3 000 W, veleno greitis (maks.): 6 000 aps./min, sukimosi greitis (maks.): 6 000 aps./min, stalo ilgis: 2 000 mm, ašies skaičius: 5, No. 04423 Four-Side Planer WEINIG Profimat 23 E Planing and Moulding Machine Used, Year of manufacture: 1998 5 spindles: bottom – right – left (movable spindle) – top – bottom Automatic width adjustment WEINIG ATS positioning control Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle bottom: 5.5 kW, 40 mm, 6000 rpm Tool diameter 125 - 145 mm, axial adjustment 5 mm Rabbetting unit, hardened table insert, mechanical brake 2nd spindle right: 7.5 kW, 40 mm, 6000 rpm Tool diameter 15 mm below table level: 100 - 200 mm, tool diameter 40 mm below table level: 100 - 180 mm, max. profiling depth 35 mm, axial adjustment 40 mm, mechanical brake 3rd spindle left (movable spindle with ATS system): joint motor with 2nd spindle, 40 mm, 6000 rpm, tool diameter 15 mm below table level: 100 - 200 mm, tool diameter 40 mm below table level: 100 - 180 mm, max. profiling depth 35 mm, axial adjustment 40 mm, mechanical brake 4th spindle top: 7.5 kW, 40 mm, 6000 rpm Tool diameter 112 - 200 mm, max. profiling depth 35 mm, axial adjustment 40 mm Segmented pressure shoe before top spindle, adjustable to cutterhead diameter and pivotable away from tool, spring-loaded, mechanical brake 5th spindle bottom: 5.5 kW, 40 mm, 6000 rpm Tool diameter 112 - 200 mm, max. profiling depth 15 mm, axial adjustment 40 mm, mechanical brake All moulding spindles dynamically balanced for high rotational accuracy Feed: 3 kW, mechanical brake, stepless 5 - 24 m/min Infeed roller before 1st spindle pneumatically controlled up/down Adjustment path for feed rollers relative to left spindle, axial 35 mm Durofer steel rollers, diameter 140 mm Joiner table 2000 mm long Manual Waxilit pump 1 driven roller on the outfeed table Side roller pressure before the left spindle, rotating and spring-loaded Top pressure roller, telescopically spring-loaded Cedpfsr Ddxyox Ahvsrh Both axes of all spindles – except the 1st spindle – equipped with mechanical digital displays Pressure shoe infeed and outfeed after the top spindle with mechanical digital displays “DigiSet” (digital double display) for left and top spindle (set cutterhead radius – read wood dimension) Movable spindle (1 axis) automatic adjustment of the left vertical spindle for varying workpiece widths Also usable as positioning spindle for one fixed measurement each Min. working height 12 mm Centralized lubrication points located at the front of the machine Including 5 standard Centrolock 530 cutterheads Complete technical documentation included Transport dimensions approx. 3500 x 1800 x 1900 mm (LxWxH) Weight approx. 3000 kg To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended. Sale as is / as seen. Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale. No warranty provided for used machines. Sale as seen. Terms of payment: Prices plus VAT; payment before collection or shipment. Terms of delivery: ex stock or location.

Sąlyga: labai geros būklės (naudotas), Ketursienė obliavimo staklės Weinig 140/4A Cjdpfx Aew Tiyxshvsrh Darbinis plotis: 140 mm Darbinis aukštis: Velenų skaičius: 6 Velenų išdėstymas: Apačioje 3 kW Dešinėje 2,2 kW Viršuje 3 kW Apačioje 3 kW Dešinėje 4 kW Kairėje 3 kW Padavimo greitis reguliuojamas: Pirma pavara 4,3/5,3/14,5/18 m/min Antra pavara 8,6/10,6/29,0/36,0 m/min Bendra galia: 21 kW

Sąlyga: naudotas, Yra: 3 vnt. Kaina už vienetą: 180,00 € + PVM. Peiliai: juostiniai obliavimo peiliai Z2 Skraidymo ratas (ø): 163 mm Skylė: 50 mm Codpsw Ngtbofx Ahvsrh Ilgis: 150 mm Medžiaga: plienas Maks. apsukos: 6 000 aps./min.

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, obliavimo aukštis: 105 mm, obliavimo plotis: 180 mm, bendras svoris: 990 kg, SCM Profiset 40 ep, Four-Sided Planer Exhibition machine, brand new, year of manufacture: 2023 Min. working width (final dimension): 23 mm Max. working width (final dimension): 180 mm Csdpfx Ahewh Nyieverh Min. working height (final dimension): 10 mm Max. working height (final dimension): 105 mm Min. length of single workpiece: 300 mm Feed speed: 6 - 12 m/min Feed motor power: 0.7/1.1 kW (1/1.5 HP) Horizontal spindle motor power (per unit): 7.5 kW (10 HP) Vertical spindle motor power (per unit): 7.5 kW (10 HP) Spindle speed: 6,000 rpm Spindle diameter: 35 mm Vertical spindle clamping length: 120 mm Horizontal spindle clamping length: 190 mm Min./max. tool diameter on horizontal spindles: 100 mm Min./max. tool diameter on vertical spindles: 100 - 120 mm Profiling capacity without axial adjustment on vertical spindles: 10 mm Unit adjustment range for planing cutterheads: +/- 1 mm Feed roller diameter: 120 mm Infeed table length: 1,700 mm Adjustment range for surfacing table and fence: 10 mm Manual lubrication pump Extraction port diameter, 4 units: 120 mm CE design

Sąlyga: naudotas, KÖLLE HA 41 lyginimo oblius Codpfx Ahoxf Tqdovjrh Obliavimo plotis apie 410 mm 2 peilių velenas

Sąlyga: naudotas, Gamybos metai: 2014, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 120 mm Surface table length: 2,500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine is cleaned and fully inspected. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125 - 145 mm Tool circle diameter with rebate cutter: 130 - 160 mm Axial adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital readout for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Credpfx Aswzmu Rshveh Tool circle diameter for straight knife cutterheads max.: 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Tool circle diameter for straight knife cutterheads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC-controlled Divided pressure shoe in front of the top tool holder, adjustable to tool circle diameter and can be swung clear of the tool, spring-loaded. Pressure shoe before and outfeed after top spindle with electronic digital readouts, integrated in the memory function or PowerCom 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller before 1st lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment range of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 Volts), 50 Hz. All spindles IE 2 version Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Other electrical standards are not taken into account. Mach...

Sąlyga: naudotas, Prieinama: 2 Kaina už vienetą: 120,00 € + PVM Peilis: juostinio obliavimo peilis Z2 Apskritimas (ø): 163 mm Anga: 50 mm Ilgis: 100 mm Medžiaga: plienas Sūkiai: max 6 000 aps./min. Cedpfx Aow Ngv Ajhvorh

Sąlyga: naudotas, Number of spindles: 5 pcs. Working width: 20 - 230 mm Planing height: 8 - 120 mm Length of jointer table: 2000 mm Feed motor: 1.1 kW Feed speed steplessly adjustable: 2 - 12 m/min 1 WEINIG Planing and Moulding Machine VARIOMAT incl. multifunction/slotting table ----- Machine will be cleaned and functionally tested before delivery Technical Manufacturer's Description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal bottom ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125 - 145 mm Axial adjustment: 5 mm Rabbetting device incl. rebate cutter MarathonCoating for table insert before and after 1st bottom spindle 2nd spindle vertical right ----- Motor with brake: 11 kW Shared motor with left vertical spindle Diameter: 40 mm Speed electronically adjustable: 3000 - 6000 rpm (for 11 kW/15 HP) Tool circle for longitudinal machining: 93-232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum profile depth: 45 mm Axial adjustment: 30 mm Insert segment incl. additional fence lip 125 mm Insert segment incl. additional fence lip 150 mm 3rd spindle vertical left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holding system Shared speed with right vertical spindle Tool circle for longitudinal machining: 93-232 mm Maximum profile depth: 45 mm Minimum profile depth with tool circle 200 mm: 20 mm Axial adjustment under table: 30 mm Insert segment 125 mm Insert segment 150 mm 4th spindle horizontal top ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125-200 mm Maximum profile depth: 30 mm Minimum profile depth with tool circle 200 mm: 20 mm Axial adjustment: 30 mm Glazing bead discharge after top spindle 5th spindle second horizontal bottom ----- Motor with brake: 4 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125-200 mm Maximum profile depth: 15 mm Axial adjustment: 10 mm Machine operation ----- Both axes of all spindles—except the 1st lower spindle—are equipped with mechanical digital readouts. Central radial adjustment with mechanical digital readout of feed, together with pressure ahead of the top spindle. Pressure after the top spindle adjustable separately. Memory function ----- For storing the setting values of profiles Tool holding axes and pressure elements before and after the top tool holder with electronic dual displays: Function: - Saves the setting values of the machined profile at the touch of a button under a profile number Csdpfxewugpbo Ahvsrh - Upon reselecting the profile number, the electronic dual displays indicate the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory slots 3 axially CNC-controlled adjustment and positioning of the spindles in combination with memory function. For spindles no. 2, 3, 4 3 radially CNC-controlled adjustment and posit...

Sąlyga: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Control system: Weinig PowerCom Weinig Powermat 500 for window production ----- Machine has been overhauled and function-tested Brief summary: ----- 6 spindles with 8,000 rpm and 7.5 kW each including 5 x HSK/Powerlock spindles Window package with glazing bead separation Spindles CNC-controlled axially and radially Right and top spindles with joint pneumatic cycling for glazing bead separation Large PowerCom control with touchscreen Detailed description: ----- Tool configuration no. 018 for window manufacturing Technical data: ----- Working width: 20–230 mm (with tool cutting circle 93–125 mm) Working height: 8–120 mm (with tool cutting circle 93–125 mm) 1st Tool Holder ----- First lower tool holder Motor with brake, 7.5 kW Diameter: 40 mm Speed: 8,000 rpm Including high-performance ball bearings Tool cutting circle: 125–180 mm With PowerLock: 93–180 mm Axial adjustment range: 17 mm Hardened table insert before 1st lower tool holder 2nd Tool Holder POWERLOCK/HSK ----- First right-hand tool holder Motor with brake, 7.5 kW Speed: 8,000 rpm Including high-performance ball bearings Tool cutting circle: 93–200 mm Max. profiling depth: 35 mm Axial adjustment range for spindle: 80 mm Axial adjustment range for PowerLock: 55 mm Radial adjustment range Crjdpfx Ahevf Raasvsh Min. tool diameter at reference level: 93 mm Max. tool diameter beyond reference level: 200 mm CNC-controlled axially and radially 3rd Tool Holder POWERLOCK/HSK ----- First left-hand tool holder Motor with brake, 7.5 kW Speed: 8,000 rpm Including high-performance ball bearings Tool cutting circle: 93–200 mm Tool cutting circle for straight cutterheads max. 163 mm Max. profiling depth: 35 mm Axial adjustment range for spindle: 80 mm Axial adjustment range for PowerLock: 55 mm Pressure shoe in front of left tool holder, Including 2 side pressure rollers, spring-loaded CNC-controlled axially and radially 4th Tool Holder POWERLOCK/HSK ----- First top tool holder Motor with brake, 7.5 kW Speed: 8,000 rpm Including high-performance ball bearings Tool cutting circle: 93–200 mm Tool cutting circle for straight cutterheads max. 163 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm CNC-controlled axially and radially 5th Tool Holder POWERLOCK/HSK ----- Second top tool holder Motor with brake, 7.5 kW Speed: 8,000 rpm Including high-performance ball bearings Tool cutting circle: 93–200 mm Tool cutting circle for straight cutterheads max. 163 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm CNC-controlled axially and radially 6th Tool Holder POWERLOCK/HSK ----- Second lower tool holder Motor with brake, 7.5 kW Speed: 8,000 rpm Including high-performance ball bearings Tool cutting circle: 93–225 mm Max. profiling depth: 15 mm Axial adjustment range: 40 mm Radial adjustment range Min. tool diameter at table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm...

Sąlyga: naudotas, Gamybos metai: 2010, Velenų skaičius: 6 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 120 mm Išlyginamojo stalo ilgis: 2500 mm Padavimas: 5-25 m/min Matmenys (Ilgis/Plotis/Aukštis): 4700/1800/1100 mm Svoris apie 4.000 kg CASOLIN MEGA 230/6 keturpusė obliavimo staklė ----- 6 velenai, su jutikliniu ekranu valdymui. Plotis ir aukštis valdomi automatiškai. Codpswmggkjfx Ahvorh Velenų išdėstymas: 1. velenas: apačioje, 40 mm skersmuo, 6.000 aps./min., 5,5 kW 2. velenas: dešinėje, 40 mm skersmuo, 6.000 aps./min., 11 kW (bendrai su) 3. velenas: kairėje, 40 mm skersmuo, 6.000 aps./min. 4. velenas: viršuje, 40 mm skersmuo, 6.000 aps./min., 7,5 kW 5. velenas: apačioje, 40 mm skersmuo, 8.000 aps./min., 5,5 kW 6. velenas: viršuje, 40 mm skersmuo, 8.000 aps./min., 5,5 kW Staklės parduodamos be apdirbimo įrankių. Papildomas ekranas mašinos priekyje nėra komplekte (priklauso langų gamybos linijai). Staklės jau išardytos ir sandėliuojamos. (Techninė informacija pagal gamintoją – be garantijos!)

Sąlyga: naudotas, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Weinig Powermat 400 with HSK/Powerlock, CNC controlled axial/radial adjustment ----- Machine is overhauled and function-tested! Summary: ----- 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of spindles via control system CNC-controlled feed adjustment and positioning Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 160 mm Axial adjustment range: 5 mm Rabbetting device MarathonCoating on table insert in front of 1st lower tool holder 2. Tool holder - PowerLock - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Speed including high-performance bearings: 8,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight knife heads max. 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Spindle CNC-controlled, axial and radial 3. Tool holder - PowerLock - left ----- Motor with brake: Shared motor with 2nd spindle Speed including high-performance bearings: 8,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight knife heads max. 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Spindle CNC-controlled, axial and radial 4. Tool holder - PowerLock - top Crjdjuzaa Sjpfx Ahvjh ----- Motor with brake: 7.5 kW Speed including high-performance bearings: 8,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Split pressure shoe in front of upper tool, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded. Spindle CNC-controlled, radial 5. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed including high-performance bearings: 8,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Split pressure shoe in front of upper tool, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded. Spindle CNC-controlled, axial and radial 6. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed including high-performance bearings: 8,000 rpm Tool cutting circle: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Spindle CNC-controlled, radial Feed system ----- Frequency-controlled feed, infinitely adjustable with brake: 4 kW, 5 - 30 m/min

Sąlyga: naujas, Velenų skaičius: 6 vnt. Darbinis plotis: 250 mm Obliavimo aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Padavimo variklis: 4 kW Padavimo greitis: 6–24 m/min. Svoris: 4770 kg Matmenys (Ilgis/Plotis/Aukštis): 4722x1860x1776 mm Keturių pusių obliavimo staklės Kuper SWT XL-6, langų versija su elektroniniu ašių bei radialiniu velenų reguliavimu. Tvirta, nedeformuojama ir žemo vibracijos lygio staklių bazė. Velenų skaičius: 6 Darbinis plotis: 250 mm Crjdpfx Ahjvnv Ubevjh Darbinis aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Veleno apsukos: dažnio valdomos 4000–8000 aps./min. Padavimo greitis: 6–24 m/min Išsamesnį aprašymą rasite pridėtame PDF faile! (Techniniai duomenys pagal gamintoją – be garantijos!)

Sąlyga: naudotas, Gamybos metai: 2000, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Planer table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E 6 spindles (including 2 right-hand spindles), powerful motors, EM 11 infeed magazine optional Working width: 20–230 mm Working height: 8–120 mm 1st spindle (bottom): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–180 mm Rebate device incl. tool Table insert hardened in front of 1st bottom spindle 2nd spindle (right): 11.0 kW ----- Common motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 3rd spindle (left) ----- Common motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm Pressure shoe in front of left spindle, incl. lateral spring-loaded roller pressure 4th spindle (right): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. tool diameter behind fence plane: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 5th spindle (top): 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment range: 45 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from tool, spring-loaded 6th spindle (bottom): 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment range: 45 mm Spindles in general ----- All moulding spindles with high rotational accuracy. Lubrication points for axial spindle movement. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Infinitely variable mechanical feed 6–36 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled for up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Axial adjustment range of feed rollers relative to left spindle: 35 mm Extension of the oscillating shaft relative to left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 volts, 50 Hz Machine base, tables, and fences ----- Planer table 2.5 m long (incl. straightening guide) Cjdpowqr Rvsfx Ahvorh Aluminium extension 0.5 m for planer table, incl. extension of straightening guide Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically operated Top pressure rollers can be swivelled away, opposite right spindles for easy tool change Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display. Outfeed after top spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindle No. 3 and 4 Minimum working height: 12 mm Electric height adjustment of top spindles and feed Central lubrication points positioned at the front of the machine Safety and sound...

Sąlyga: naudotas, Gamybos metai: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control: K2 Basic 7" Touch KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4,500 – 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed beam motorized positioning - Further motorized positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (with tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm The machining of the workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter, and feed speed. Adjustments to the operating parameters may be necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 125–160 mm Rabbet cutter: diameter difference 20–25 mm to the planing head Important: Machine cannot be operated without a jointer rabbet cutter Suction port D = 125 mm Tool clamping system: Quick-clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Credpfx Ahswgwmnsveh Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatically and dynamically adjustable via linear guides Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with f...