Miller Tp 104 pirkti naudotą (14)

Būklė: geras (naudotas),

Būklė: paruoštas naudoti (naudotas),

Gamybos metai: 1992, būklė: paruoštas naudoti (naudotas), Max. paper size: 720x1040mm, min. paper size (straight printing): 360x520mm, perfecting (straight/reverse printing): 440x520mm, paper thickness: 0.06–0.5mm, max. print area (straight printing): 710x1030mm, perfecting: 700x1030mm, max. throughput straight/perfecting: 7000/5000 sheets/h, plate size (recommended): 790x1045mm, print start: 48mm, gripper margin without print: 10.5mm ±1mm. Lodpjw Azubefx Abrjab Equipment: Miller TP 104 base machine with two printing units, sheet reversal between first and second printing unit, numbering tower with control system for accommodating mechanical numbering machines by Zeiser and Leibinger (without numbering units), Spiess TP 104/1 feeder, load capacity: 10,000N. Remote adjustment via control desk: ink control for 1st and 2nd printing units, fine adjustment for circumferential and lateral register: ±1.5mm, plate cylinder, 2x front plate clamping bars – single – only rear bar split, blanket cylinder washing device – completely defective, manual cleaning, powder sprayer without additional regulation, delivery extension with additional area after numbering unit approx. 1.85m, 10x ink form rollers, 8x ink transfer rollers, 1x blanket roller, 1x wash-up roller, 1x ductor roller, complete documentation.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Ofsetinė spaudos mašina 52/72 su inverteriu Laedsyapxbepfx Abrjb

Būklė: labai geros būklės (naudotas), KATALOGO NUMERIS 7613 Techniniai duomenys: - įėjimo plotis 650 mm - įėjimo aukštis 300 mm - veleno plotis 660 mm - peilio ilgis 660 mm - peilių skaičius 2 vnt. - sieto matmenys 90x100 mm - 2 apačioje traukiantys dantyti velenai - apatinio veleno variklis 3 kW - 2 viršuje traukiantys dantyti velenai - viršutinio veleno variklis 3 kW - juostinis padavėjas - padavimo juostos ilgis 2700 mm - padavimo juostos plotis 630 mm - pagrindinis variklis 75 kW - automatinis reversas - atbulinė eiga - pilni matmenys (ilgis/plotis/aukštis) 5350x1300x1300 mm - svoris 4200 kg PRIVALUMAI – pagaminta Italijoje – automatinis reversas (galima reguliuoti) – atbulinė eiga – naudotas smulkintuvas, labai gera būklė Grynoji kaina: 149 900 PLN Grynoji kaina: 35 690 EUR pagal 4,2 EUR kursą Ljdsy Nyqnspfx Abrjab (Kainos gali keistis dėl valiutų svyravimų)

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodama 1–6 pilni komplektai Gamintojas: Miller Modelis: Proheat 35 – beveik kaip naujas. Maitinimo šildytuvas su indukciniu kaitinimo elementu, 400–460 V, CE žymėjimas. Laedpfx Ajyr Idtsbreb Naujo komplekto kaina 54 000 eurų. Pardavimas tik B2B + PVM arba neapmokestintas eksportui. Galimi netikslumai – pasiliekame teisę juos keisti.

Būklė: naudotas, Flow monitor - Voltage: 24 V - Dimensions: 105/105/H265 mm Lajdpodnn Hwefx Abrjb - Weight: 1 kg

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MP2510892, įėjimo įtampa: 400 V, Clinch Press Insertion Machine Miller MP1065AF, with automatic parts feeder and feeding tool Hydraulic insertion machine for processing press-fit nuts, threaded studs, bushings, and other press-in elements. Technical specifications: • Pressing force: 2–97 kN (10 tons) • C-frame throat depth / reach: 650 mm • Cylinder stroke: 200 mm • Speed: 70 mm/sec • Cycle time: 3 seconds, up to 1,200/hr • Dimensions: H 2,140 mm x W 1,070 mm x D 1,550 mm • Weight: approx. 1,500 kg • Electrical connection: 400 V, 3.0 kW Guaranteed, long-term reliability due to the use of high-quality components Easy operation and short changeover times Low maintenance and service requirements Highly flexible due to numerous application possibilities Options available: automatic feeding system, touchscreen control, programmable tooling cross, etc. Energy-saving, robust design with hydraulic system energy efficiency Electronic and mechanical safety systems for 100% safe processing of conductive and non-conductive materials Connection to standard power supply (400 V) Laedpjirnaqofx Abrob Capable of processing all common press-in elements thanks to high insertion force; press-in nuts up to M12, threaded bushings up to M10, threaded studs up to M10 Continuously adjustable insertion force, repeat accuracy ±1%

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MP2506991, Here we offer a hydraulic press-in machine for press-fit elements / clinch fasteners with 6 tons of pressing force. This is a demo machine, used at a trade show and for in-house demonstrations. The machine features a compact PLC with a counting device and various adjustment options. In addition to the standard safety equipment, the machine is fitted with a MURR safety circuit to ensure maximum operator safety. - Guaranteed long-term reliability due to the use of high-quality components - Easy operation and short change-over times - Low maintenance and service requirements - Highly flexible due to a wide range of application possibilities - Energy-saving, robust design with the efficiency of a hydraulic system - Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials - Connection to standard power supply (400V) - Processing of all common press-in elements thanks to high pressing force, press nuts up to M10, threaded inserts up to M6, threaded studs up to M8 - Manual adjustment of the pressing force, repeat accuracy +/-1% - Adjustable hard stop Technical Data: • Pressing force 2-57KN (6 tons) • C-frame throat depth / reach 450mm • Cylinder stroke 200mm • Speed 80mm/sec Lajdpfx Asirm R Eobrob • Cycle time 3 sec., 1200 cycles/hour • Dimensions H 2200mm x W 960mm x D 1060mm • Weight approx. 680 kg • Electrical connection 400V, 2.2 kW Options: - Tool kit with 14 or 33 punches and dies - Automatic feed system, touch screen control, etc. available as options - Vibratory feeder for automatic supply of press-in elements - Separation and feed unit for automatic processing of clinch fasteners If you have any questions, we are happy to assist. On-site inspection possible by appointment. We are also pleased to answer your questions by phone or email.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Miller Subarc DC 1250 skaitmeninis suvirinimo maitinimo šaltinis 1250A, 44V, trifazis, su skaitmeniniais valdikliais Lsdpfoy Azh Iox Abreab

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1990, Miller-Johannisberg 660 Specifikacija Detalės Procesas Karšto oro ruloninis ofsetinis spausdinimas Rulono plotis 660 mm Laedjyk Eg Nspfx Abrob Atpjova 452 mm Spalvos/Vienetai Paprastai komplektuojamas su 5 spausdinimo sekcijomis (dirba 4+4) Džiovintuvas VITS dujinė džiovyklė Lankstyklė Galima lankstyti iki A5 formato Valdymas Valdymo pultas su registracijos kontrole Įtempimo valdymo sistema Baldwin drėkinimo sistema Šaldymo įrenginys ir aušinimo sistema prieš lankstyklę

Būklė: naudotas, Gamybos metai: 1967, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Nr.15862, tuščias svoris: 10 000 kg, bendras svoris: 10 000 kg, įėjimo įtampa: 400 V, Miller SY, kurios formatas 76 x 104 cm, yra klasikinio knygų spaudos vėlyvosios fazės spausdinimo mašina, pasižyminti savo laikmečiui būdingu tvirtumu ir precizika. Pagaminta 1967 metais, ši mašina priklauso paskutinei kartai, gamintai dar prieš pereinant prie ofsetinės spaudos. Dėl to ji technologiškai itin ištobulinta: išsiskiria apgalvota mechanika ir aukšta surinkimo kokybe. Ši knygų spaudos mašina ypač tinkama bigavimui, perforavimui, štampavimui ir aklam reljefiniam spaudui, todėl idealiai tinka spaustuvėms bei specializuotoms apdailos įmonėms, vertinančioms patikimą, universalų ir tradicinį darbo įrankį. Lodjx Di Rdepfx Abrjab

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, garantijos trukmė: 3 mėnesiai, aušinimo tipas: vanduo, suvirinimo srovė esant 60 % darbo ciklui: 500 A, suvirinimo srovė esant 100 % darbo ciklui: 400 A, For sale: Miller PipeWorx 400 565 AMP (60% at 500A, 100% at 400A) 380 Volt Year: 2013 Water-cooled Pulse RMD Program memory Electrode option Suitable for welding steel and stainless steel Completely overhauled, tested, and serviced. Test welding possible. Includes 1.0-1.2mm feed rollers, 2x PRO5000 welding torches, ground cables, gas hose, transport trolley, and 3 months warranty. Test welding is possible. Lodpfxsx Rppcj Abrsab A video of the machine in welding operation is available. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries inside and outside Europe with Euro pallets per shipment. All our machines have been serviced and are 100% ready for use unless otherwise stated. The photos above show the actual machine. We can also offer other types of machines, including: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek – never with third parties.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, mašinos/transporto priemonės numeris: WG002553, Markė/modelis: MCWEL M630 (Miller) Nominali nuolatinės srovės galia: 26,4 kW Laedpfevznbyex Abreb Nominali srovė: 550 A Įtampa: 20–45 V Srovės diapazonas: 55–550 A Nominali darbo ciklas: 60% Tinkama elektrodas: 1,6–8,0 mm Variklio modelis: F3L912 Nominali galia: 28 kW / 1800 aps./min., 60 Hz Aušinimo sistema: aušinimas oru, aplinkos sąlygos Matmenys: I – 1 525 mm x P – 760 mm x A – 1 050 mm Svoris: 900 kg