Mfh 5000 pirkti naudotą (2 576)

Sąlyga: naudotas, Gamybos metai: 2004, veikimo valandos: 9 252 h, Funkcionalumas: visiškai funkcionalus, rida: 82 616 km, galia: 110 kW (149,56 AG), pirmoji registracija: 10/2004, bendras svoris: 10 000 kg, kuro tipas: dyzelinas, spalva: oranžinė, ašių konfigūracija: 4x2, tuščias svoris: 5 000 kg, kuras: dyzelinas, vairuotojo kabina: dieninė kabina, pavaros tipas: hidrostatinis, pakaba: plienas, krovinio erdvės tūris: 5 m³, Įranga: ABS, oro kondicionavimas,

Sąlyga: naudotas, rida: 78 850 km, galia: 100 kW (135,96 AG), pirmoji registracija: 03/2000, bendras svoris: 10 000 kg, kuro tipas: dyzelinas, spalva: oranžinė, ašių konfigūracija: 4x2, didžiausias leistinas svoris: 5 000 kg, tuščias svoris: 5 000 kg, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, pakaba: plienas, krovinio erdvės tūris: 4 m³, Gamybos metai: 1999, veikimo valandos: 12 913 h, Įranga: hidraulika, papildomi žibintai,

Sąlyga: geras (naudotas), 4 stotelių knygų įrišimo presas blokams klijuoti MURO 4 x 5000 A4/HAD. Tvirta konstrukcija, drėgmei atspari plokštė, cinkuoti komponentai. Įrenginys puikios būklės. Lodpfox Ncw Dex Af Iorg Techninės specifikacijos: Formatas: 350x320x550 (P/G/A) Stotelių skaičius: 4 Maitinimas: 230V Didžiausia galia: 4 kW Svoris: 102 kg Didelė spaudimo jėga, smagračiai su patogia rankena. Elektrinis džiovinimas su dviem galios lygiais: 2 ir 4 kW. Kiekvienas presas gali būti pakreiptas iki 45°. Konstrukcija sumontuota ant ratukų, kad būtų lengva perstumti.

Sąlyga: geras (naudotas), 5000 L stainless steel tank with mixer and cooling system. In good condition. Equipped with an integrated jacket around the tank for cooling. Lsdpfxevr E N Ne Af Ijrg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Mobile coil cart FORSTNER AG 5000 b2mf 1500 Lrodpfx Afjmv Hv Aj Isg Maximum coil width: 1500 mm Load capacity: 5000 kg Inner diameter: 360 - 630 mm Outer diameter: 1100 mm Equipped with 4-arm mandrel Double-supported decoiler with handbrake and steel wheels for mobility

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, mašinos/transporto priemonės numeris: B0508A0463, TRUMPF TruBend Cell 5000 – Zrobotyzowana komórka gięcia | Rok produkcji: 2015 Prasa krawędziowa TruBend 5230 Lsdpsw Eilyefx Af Isrg Zrobotyzowany system gięcia BendMaster System sterowania: TASC 6000 (programowanie robota i prasy przez interfejs maszyny) Specyfikacja prasy krawędziowej: Siła nacisku: 230 ton Długość gięcia: 4250 mm Rok produkcji: 02.2015 Numer seryjny: B0508A0463 Czasy pracy: Czas załączenia maszyny: 33 789,3 h System hydrauliczny: 8 528,8 h Czas pracy belki prasującej: 1 119,9 h Opis: W pełni zautomatyzowane rozwiązanie do gięcia – TruBend Cell 5000 przeznaczona do produkcji wielkoseryjnej i precyzyjnej. Zintegrowany robot umożliwia wydajne gięcie przy minimalnym udziale operatora. Stan: Bardzo dobry, regularnie serwisowany Demontaż, załadunek i transport mogą zostać zorganizowane.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, We offer here a high-productivity 3D printer for industrial series production. The system was most recently used with Alupowder AISi10MG. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, which confirm that the machine was operational before disassembly. All axes are professionally secured. The machine can be transported on a regular standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating hours: Laser 1 beam on: 5165 hrs. Laser 2 beam on: 5096 hrs. Laser 3 beam on: 5023 hrs. Trumpf TruPrint 5000 with options Powder Bed Monitoring and Melt Pool Monitoring included Filter unit Accessories: 2 build cylinders 3 dosing cylinders 1 overflow container used 1 overflow container NEW Manuals 4 heat exchangers NEW 2 easy filters NEW 3 NTRON SIL02 oxygen analyzers + sensors NEW 1 oxygen sensor NEW and much more, such as seals, etc. The pallet truck by Armanni CAR.Elev. for swapping containers is also in stock and can be offered optionally. Lredpfx Afsvu Syye Ieg Faster to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 prepares you for industrial-scale series production. With features such as an optional 500°C preheating and the full-field multilaser setup featuring three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine produces high-quality parts from a range of metallic materials quickly and reliably—and meets the rigorous quality requirements in tool and mould making, also when 3D printing on preform blanks, as well as in aerospace and medical technology sectors. Optionally, the entire process chain can be executed under protective gas atmosphere: sieving, printing, cooling, depowdering. Combined with external part and powder management and TRUMPF’s monitoring solutions, it is perfectly suited for industrial additive series manufacturing. With the Preform option, the TruPrint 5000 supports hybrid component production. The additively manufactured component structures are built onto a blank. This innovative feature is particularly suitable for easy handling in tool and mould making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (reduced when preheating >200 °C) Processable materials[1]: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminium, nickel-based or titanium alloys Build rate[2]: cm³/h 5–180 Layer thickness[3]: μm 30–150 Max. laser power at the workpiece (TRUMPF fiber laser): W 3 x 500 Beam diameter[3]: μm 100–500 Minimum measurable oxygen content: ppm up to...

Sąlyga: geras (naudotas), Interface from Fronius Lodpfx Afowbkf Tj Iorg

Sąlyga: beveik kaip naujas (parodų įrenginys), FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package, standard from 1.5 m ➤ Fronius carriage ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator Ljdpswbknbjfx Af Ierg With this unit, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It features filler wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in bodywork applications. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further expanding the functions of the TPS unit. ----- IMMEDIATE DELIVERY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For clarification: we purchase nearly new used units, disassemble them, check everything thoroughly, replace any wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean and have neither burn marks on the displays nor numerous burn holes or dents distributed over the unit! You buy from us an item that is presentable and does not look completely worn out! ►►►Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash upon personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the units on site and pay in cash. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – Fronius only, no other brands! We are experts with these units and never sell anything we are not familiar with.

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. Lodpfx Afewbh Ifj Ierg ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.

Sąlyga: beveik kaip naujas (parodų įrenginys), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of supply: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit switches off if the water cooling fails or overheats to protect the torch package. These features would typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our view the most functional wire feed case, as the wire spool is safely stored in the closed case. ➤ Fronius Long Intermediate Hose Package – Each set is supplied with a 5-meter connecting hose between the power source and wire feed case, providing more flexibility and better handling. Take the wire feed unit from the main machine to hard-to-reach areas! The connecting hose is neatly mounted on a hook at the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with gas bottle holder available on the market. ➤ Binzel Torch Package – With up/down regulation of amperage directly at the torch. ➤ Ground Cable 3-4m Lredowbil Sjpfx Af Ieg ➤ New pressure regulator from Messer ➤ New basket spool adapter for large wire spools This machine enables welding of almost all materials, including aluminium, steel, and stainless steel (V2A). It features pulse wire programmes and is also suitable for MIG brazing (CuSi), which is frequently used in the bodywork sector. Further options available at extra cost For example: Fronius AW4000/AW5000 Job Master torch package (display on the torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE FULL INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping without issue! ✔ We are also available on WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What condition are the machines in? To clarify: We purchase nearly new used machines, disassemble and meticulously inspect them, replace any worn parts if necessary, and only after a successful test weld do we release them for sale. "All" machines are clean, with no burn holes in the displays and no significant burn marks or dents scattered across the units! You are buying an item that is also ⭐visually appealing and does not look run-down! ►►►Will we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you possess a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash upon personal pickup. ►►►Why buy from us? We are specialists in this Fronius welder series, always stocking 60-80 units – exclusively Fronius, no other manufacturers! We know these machines in detail and do not sell anything we are not thoroughly familiar with.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2005, veikimo valandos: 11 000 h, valdiklio modelis: Sinumerik 840D, lazerio galia: 2 700 W, plieno lakšto storis (maks.): 6 mm, aliuminio lakšto storis (maks.): 4 mm, darbinis ilgis: 6 500 mm, TruLaser Tube 5000 with Special Equipment: TruFlow 2700 Laser & SeamLine Tube! TECHNICAL DETAILS Laser power: 2,700 W Maximum sheet thickness - steel: 6 mm Maximum sheet thickness - aluminium: 4 mm Working area: 6,500 mm Ledoyanr Tjpfx Af Ijrg MACHINE DETAILS Laser type: TruFlow 2700 Control system: Sinumerik 840D Laser operating hours: 11,000 h EQUIPMENT - Documentation/manual - Safety light curtain - Robust machine frame with integrated laser unit - CO2 Laser TruFlow 2000, high-frequency excited, with chiller unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for fast processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Multi-beam light curtains - Completely encapsulated and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20-85 mm and D 85-150 mm - 1 set of V-shaped forming shells and guide rollers for round tubes - 1 set of U-shaped forming shells and guide rollers for 120 mm circumferential diameter - SeamLine Tube

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, veikimo valandos: 5 214 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 730 mm, Y ašies eiga: 730 mm, Z ašies eigos atstumas: 880 mm, valdiklio modelis: SINUMERIK 840 D sl/operate, veleno greitis (maks.): 20 000 aps./min, TECHNINĖ INFORMACIJA X eiga: 730 mm Lrodpfxjyapvae Af Isg Y eiga: 730 mm Z eiga: 880 mm Pagrindinio veleno apsukos maks.: 20 000 aps./min Maks. sukimo momentas: 250/104 Nm Įrankio tvirtinimas: HSK-A63 Atstumas nuo veleno ašies iki stalo: 80 - 810 mm Atstumas nuo veleno galo iki stalo centro: 70 - 950 mm Padėklų kiekis: 2 Padėklo matmenys: 500 mm x 500 mm Didžiausias ruošinio svoris: 500 kg Padėklo keitimo laikas: 9,0 s Didžiausias ruošinio skersmuo: 800 mm Didžiausias ruošinio aukštis: 1 000 mm Įrankių stočių kiekis: 40 Įrankių keitimo laikas (įrankis į įrankį): 2,5 s Įrankių keitimo laikas (drožlė į drožlę): 4,4 - 10,0 s Didžiausias įrankio skersmuo: 70 mm Didžiausias įrankio ilgis: 550 mm Didžiausias įrankio svoris: 12 kg Greitasis judesys: 60 000 mm/min STAKLIŲ INFORMACIJA Valdymas: SINUMERIK 840 D sl/operate Aukšto slėgio aušinimas: 70 bar Matmenys ir svoris Pastatymo matmenys: 6 000 mm x 4 000 mm x 2 700 mm Staklių svoris: 12,0 t Darbo valandos: 5 214 h ĮRANGA Padėklų keitiklis Aušinimo skysčio bakas Įrankio lūžio stebėsena

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 350 mm, tekinimo skersmuo virš slankiojančio stalo: 1 350 mm, tekinimo skersmuo virš viršutinio vežimo: 1 000 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 7 500 mm, bendras plotis: 2 130 mm, bendras aukštis: 1 550 mm, sukimosi greitis (maks.): 630 aps./min, sukimosi greitis (min.): 5 aps./min, ruošinio svoris (maks.): 11 000 kg, veleno tvirtinimas: MK 6, The PORĘBA TR-135B1/5M universal lathe has undergone a comprehensive general overhaul and has been fully modernized by us. It features technical specifications that correspond to the technical and operational documentation of a brand-new machine, meets the technical acceptance requirements of the WOT and the Polish standard, and also fulfills EU requirements (CE Declaration of Conformity). The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, ready for technical acceptance. Technical data: - Centre distance / Turning length: 5000 mm - Swing over bed: 1350 mm - Swing over carriage: 1000 mm - Swing in bridge gap: 1650 mm - Spindle bore diameter: 120 mm - Power drive for the top slide cross-feed for taper turning up to 450 mm in length, 90° scale - Maximum workpiece weight between centres: 8,000 kg - Maximum workpiece weight between centres + 1 steady rest: 10,000 kg - Maximum workpiece weight between centres + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (RPM): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 22/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 7500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 13,200 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder, chip trays Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers Lrodpeva Elaefx Af Iog - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 350 mm, tekinimo skersmuo virš slankiojančio stalo: 1 350 mm, tekinimo skersmuo virš viršutinio vežimo: 1 000 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 7 500 mm, bendras plotis: 2 130 mm, bendras aukštis: 1 550 mm, veleno greitis (maks.): 630 aps./min, veleno greitis (min.): 5 aps./min, bendras svoris: 12 900 kg, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-135B2/5M has been comprehensively rebuilt and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, complies with the technical acceptance conditions of WOT and the Polish standard, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Refurbishment on order, delivery time 3.5 months from order placement Technical data: - Centre distance/turning length: 5,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centres: 9,000 kg - Maximum workpiece weight between centres + 1 steady rest: 12,000 kg - Maximum workpiece weight between faceplates + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27 / 41 kW (1st / 2nd gear) - Overall dimensions: - Total length: 7,500 mm - Width: 2,130 mm - Height: 1,550 mm Lrsdpfx Asi Apilef Ieg - Total weight: 12,900 kg Standard equipment: tailstock, coolant pump, chuck guard, tool post Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno skylė: 105 mm, tekėjimo skersmuo: 900 mm, tekinimo skersmuo virš slankiojančio stalo: 900 mm, tekinimo skersmuo virš viršutinio vežimo: 570 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 7 500 mm, bendras plotis: 2 130 mm, bendras aukštis: 1 550 mm, veleno greitis (maks.): 630 aps./min, veleno greitis (min.): 5 aps./min, veleno tvirtinimas: MK 6,

Sąlyga: naudotas, Funkcionalumas: nepatikrintas, Šlifavimo staklės parduodamos Lodpfsxbzarox Af Ierg

Sąlyga: naujas, The DL E Heavy 620/5000 is a high-performance conventional lathe in the category of heavy-duty lathes, specifically designed for machining large workpieces up to 8000 mm in length and 1600 mm in diameter. Featuring a heavy-duty cast iron frame and a powerful 22 kW motor, it delivers outstanding cutting performance and minimizes vibrations during operation. A practical, joystick-controlled feed system enables precise movements in the X and Z axes. The motorized tailstock is available for centre distances starting from 3000 mm, simplifying workpiece handling. The machine comes standard with a mounted 3-axis position indicator, ensuring increased working accuracy. The user-friendly control panel and clearly arranged buttons provide intuitive operation. Discover the advantages of the DL E Heavy 620/5000 and boost your productivity in the field of conventional lathes. Contact us to request your quote! Lodeww T Txepfx Af Isrg

Sąlyga: naudotas, bakelio talpa: 5 000 l, GENERAL Features: Crane lugs Design: suspended Remarks: 2 containers (6169-3+5) with broken intermediate flange at the gearbox Speed: 26 - 101 rpm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be checked) Total height: 4,200 mm Heating/Cooling: available Power: 6.8 kW Max. permissible operating temperature: 60°C Max. permissible operating pressure: 10.0 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Location: Bremen Technical documentation: Drawing, TÜV papers Jacket heating/cooling (cylinder): Half-pipe coil Nameplate: Volume: 5,000 liters Jacket volume: 98.0 liters Cylinder wall thickness: 6.0 mm Jacket material: Stainless steel V2A 1.4541 (AISI 304) Product-contact material: Stainless steel V2A 1.4541 (AISI 321) Condition: Used Cylindrical height: 1,750 mm Previous use: Chemical industry VESSEL Max. permissible operating temperature: 60°C Base design: Ring base HEATING/COOLING JACKET Base heating/cooling: Half-pipe coil FEATURES Manhole/Dome: on top cover Outlet: Flange DN80 Note: slight residues MATERIAL SPECIFICATION Foot material: Steel AGITATOR Agitator manufacturer: Ekato Lsdpfoxqbuhox Af Ierg Voltage: 380/660 Volt Baffle: Agitator location: Centered in top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.4 mm Top wall thickness: 9.0 mm

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 760 mm, plotas našumas: 4 000 m²/val, garantijos trukmė: 24 mėnesiai, bakelio talpa: 120 l, bendras aukštis: 1 258 mm, bendras plotis: 834 mm, bendras ilgis: 1 458 mm, vandens talpos tūris: 130 l, darbinis greitis: 8 mm/s, We offer for sale a brand new IXSA X9 Ride-On Scrubber Dryer. Warranty coverage: - Machine: 24 months - Batteries: 60 months Technical specifications: • Working width: 760 mm • Productivity: 4,000 m²/h • Brush diameter (number): 380 mm (2) • Squeegee width: 1,020 mm • Waste water tank: 130 l • Solution tank: 120 l • Rated power: 2,100 W • Max. incline: 10 % • Vacuum motor output: 24 V / 550 W • Brush motor output: 24 V / 2x550 W • Maximum speed: 8 km/h • Brush pressure: 3.5 Mpa • Brush speed: 180 rpm • Pad width: 13 inches • Suction: 188 mbar • Noise level (EN 60704): 65 dB(A) • Dimensions (LxWxH): 1458 x 834 x 1258 mm • Weight (without battery): 248 kg • Lifepo4 batteries: 25.6V 200Ah, run time approx. 5 h • Lifepo4 batteries: 25.6V 300Ah, run time approx. 7 h • Batteries can be opportunity charged Standard equipment included with the scrubbers offered: • Neodymium disc brushes—magnetic mounting Ledsyaafljpfx Af Ijrg • Pad holder • LifePro batteries with extended cycle life and longer run time compared to standard gel batteries • Charger • Linatex suction bar blades Why choose IXSA? ✅ Durability – minimal electronics inside the machine increase long-term reliability ✅ 5-year warranty on lithium-ion batteries – unmatched in the industry, providing top-level durability and reliability ✅ Significantly higher charge/discharge cycles than gel batteries (5,000 vs. 700 cycles) and longer runtimes—IXSA batteries ensure more efficient operation and lower replacement costs over time ✅ Magnet-mounted brushes – simple installation and removal ✅ Long operating time per charge, with quick recharge capability ✅ Highest quality American-made LINATEX squeegee blades ✅ Twin suction system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – advanced technology for improved cleaning results and extended service life ✅ High surface performance – saves time and reduces labor costs ✅ Robust construction, low running costs – designed for heavy-duty, professional use ✅ Ergonomic and intuitive controls – user-friendly and easy to operate

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 650 mm, plotas našumas: 3 300 m²/val, garantijos trukmė: 24 mėnesiai, bakelio talpa: 85 l, bendras aukštis: 1 170 mm, bendras plotis: 660 mm, bendras ilgis: 1 300 mm, vandens talpos tūris: 95 l, tuščias svoris: 229 kg, We offer for sale a brand new Ride-on Scrubber-Dryer Machine IXSA Model X8 with seat. Device warranty: 24 months Battery warranty: 60 months Technical specifications: • Working width (mm): 650 • Machine productivity (m²/h): 3300 • Brush diameter (quantity) (mm): 330 (2) • Squeegee width (mm): 1020 • Dirty water tank (l): 95 • Detergent tank (l): 85 • Rated power (W): 1350 • Maximum incline (%): 10 • Suction motor power (V/W): 24/500 • Brush motor power (V/W): 24/2*300 • Maximum speed (km/h): 8 Lodpfjx U T E Nex Af Ierg • Brush pressure (Mpa): 2.8 • Brush rotation speed (rpm): 180 • Pad width (inch): 13 • Vacuum (mbar): 188 • Noise level (EN 60704) (db(A)): 63 • Machine dimensions (L/W/H): 1300*660*1170 mm • Machine weight (without batteries) (kg): 229 • Lifepo4 batteries: 24V 200Ah, Working time: approx. 7 h • Battery charging possible during use Standard equipment provided with the scrubber-dryer listed includes: • Neodymium disc brushes – magnet-mounted • Pad driver plate • LifePro batteries with extended cycle count and longer operating time compared to standard gel batteries • Charger • Squeegee blades made from LINATEX material Why choose IXSA? ✅ Durability – minimal electronics ensure maximum reliability and longevity ✅ 5-year warranty on lithium-ion batteries – unique in the industry, a testament to the highest durability and reliability ✅ Higher charging cycle count versus gel batteries (700 vs 5000 cycles) and longer operating time – IXSA batteries allow more efficient operation and reduced long-term replacement costs ✅ Magnet-mounted brush – for easy installation and removal ✅ Long working time with short charging duration ✅ Top-quality American LINATEX squeegee blades ✅ Dual suction system – leaves the floor perfectly dry immediately after cleaning ✅ Neodymium brushes – advanced technology for enhanced cleaning performance and extended brush life ✅ High surface efficiency – saves time and operating costs ✅ Robust construction, low operating costs – equipment built for intensive, professional use ✅ Ergonomics and intuitive operation – comfortable usage and easy control

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 530 mm, plotas našumas: 3 000 m²/val, garantijos trukmė: 24 mėnesiai, bakelio talpa: 60 l, bendras aukštis: 1 090 mm, bendras plotis: 550 mm, bendras ilgis: 1 270 mm, vandens talpos tūris: 65 l, tuščias svoris: 154 kg, We offer for sale a New Scrubber-Dryer Machine with traction – IXSA Model X7T Device warranty – 24 months Battery warranty – 60 months Technical specifications: • Scrubbing width: 530 mm (20 inches) • Squeegee width: 790 mm • Dimensions: L1270 × W550 × H1090 mm • Solution/dirty water tank: 60/65 L • Vacuum motor: 370 W • Brush motor: 500 W • Productivity: 3000 m²/h • Net weight: 154 kg • Working speed: 0–5 km/h • Semi-automatic drive • Battery charging time: approx. 4h (2h to 80%) • Battery runtime: approx. 4h • Battery lifespan: 5000 cycles • Possibility to recharge the battery Standard equipment for scrubber machines included in the offer: • Neodymium disc brushes – magnetic mounting • Pad driver • LifePro batteries with extended cycle life and longer operation compared to standard Gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? ✅ Durability – electronics are reduced to a minimum, resulting in higher reliability and longevity ✅ 5-year lithium-ion battery warranty – unique in the industry, confirming top durability and reliability ✅ Increased charging cycles compared to gel batteries (700 vs. 5000 cycles) and longer operating times – IXSA batteries enable more efficient use and lower replacement costs in the long term ✅ Magnet-mounted brush – easy assembly and disassembly ✅ Long operating time on the included battery with short charging times ✅ Highest-quality American LINATEX squeegee blades ✅ Double suction system – floors are perfectly dry immediately after cleaning ✅ Neodymium brushes – advanced technology ensures better results and longer lifetime Lrjdjx U Ty Hopfx Af Ieg ✅ High surface productivity – saving time and labor costs ✅ Robust construction, low operating costs – equipment designed for intensive, professional use ✅ Ergonomics and intuitive controls – operator comfort and simple control

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 530 mm, plotas našumas: 2 500 m²/val, garantijos trukmė: 24 mėnesiai, bakelio talpa: 52 l, bendras aukštis: 1 090 mm, bendras plotis: 550 mm, bendras ilgis: 1 270 mm, vandens talpos tūris: 48 l, tuščias svoris: 154 kg, We offer for sale a Brand New Scrubber Dryer IXSA Model X6 Device warranty – 24 months Battery warranty – 60 months Technical data: • Scrubbing width: 530 mm (20 inches) • Squeegee width: 790 mm • Dimensions: L1270 × W550 × H1090 mm • Solution / recovery tank: 48 / 52 L • Vacuum motor: 370 W • Brush motor: 500 W • Productivity: 2,500㎡ / h • Net weight: 154 kg • Working speed: 0–5 km/h • Semi-automatic drive • Battery charging time – approx. 4h (2h to 80%) • Battery run time – approx. 4h • Battery lifespan – 5,000 cycles • Battery can be recharged at any time Standard equipment included with the scrubber dryers in this offer: • Neodymium disc brushes – quick magnetic mounting • Pad holder • LifePro batteries – extended cycle life and longer run time compared to standard Gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? ✅ Durability – Minimum electronics used guarantees maximum reliability and uptime ✅ 5-year warranty on lithium-ion batteries – unmatched in the industry, confirming top-tier durability and reliability ✅ Significantly higher charge cycles compared to gel batteries (700 vs. 5,000 cycles) and extended operating time – IXSA batteries ensure more efficient use and lower long-term replacement costs ✅ Magnet-mounted brush – easy installation and removal ✅ Long battery life with short charging time ✅ Top-quality American LINATEX squeegee blades ✅ Dual suction system – leaves the floor perfectly dry immediately after cleaning ✅ Neodymium brushes – modern technology ensures superior results and longer lifespan ✅ High area efficiency – saves time and reduces operational costs ✅ Robust construction, low operational costs – equipment designed for intensive, professional use Lsdsx U Tvuopfx Af Isrg ✅ Ergonomic and intuitive operation – user comfort and easy controls

Sąlyga: naudotas, bakelio talpa: 5 000 l, BENDROJI INFORMACIJA Įranga: krano kilpos Konstrukcijos tipas: stovimas Pastabos: viduje 1 vamzdynas; viduje stipresnės priemaišos Apsisukimai: 100 / 200 aps./min. Vidinis skersmuo: 1,540 mm Bendras aukštis: 4,600 mm Galia: 4,7 / 5,9 kW Maišytuvo tipas: sraigtinis propeleris Vieta: Brėmenas Tipinė lentelė: Tūris: 5.000 litrų Gaminį liečianti medžiaga: V2A 1.4301 (AISI304) Būklė: naudotas Cilindrinis aukštis: 2.500 mm Paskutinė naudojimo paskirtis: dažų pramonė TALPA Kojelių tipas: kojos Kojelių skaičius: 4 vnt. ĮRANGA Aptarnavimo anga / liukas: dangtyje (DN 500) Išleidimas: flanšas DN80 Lrsdpfx Afeycluqo Ieg MEDŽIAGOS CHARAKTERISTIKOS Kojelių medžiaga: nerūdijantis plienas MAIŠYTUVAS Įtampa (V): 400 V Dugno guolis: Maišytuvo montavimas: ekscentrinis viršutiniame dangtyje

Sąlyga: naudotas, bakelio talpa: 5 000 l, BENDRA INFORMACIJA Konstrukcija: vertikali Pastabos: liuko angos apie 310 x 410 mm; nedideli įlenkimai cilindre Vidinis skersmuo: 1.490 mm Bendras aukštis: 3.550 mm Vieta: Brėmenas Tūris: 5.000 litrų Su produktu kontaktuojanti medžiaga: V2A 1.4301 (AISI304) Būklė: naudota Cilindrinis aukštis: 2.650 mm Paskutinis naudojimas: vaisių sultys TALPA Padėjimo forma: kojos Kojų skaičius: 4 vnt. Ljdpfsyck D Rsx Af Iorg APRAŠYMAS Liukas / kupolas: cilindre Išleidimas: DN32 DIN 11851 Pastaba: šiek tiek nuosėdų MEDŽIAGOS KOKYBĖ Kojų medžiaga: nerūdijantis plienas