Medžio Drožlės pirkti naudotą (3 990)

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Automatinis tekinimo staklės Locatelli OMK300 + UF 150/220 Tekinimo ilgis: 300 mm Didžiausias keturkampis: 100x100 mm Mažiausias keturkampis: 20x20 mm Darbas pagal kopijavimo šablonus Nkodjycv Emopfx Af Iet Gręžimo pernešimo sistema UF 150/220

Sąlyga: naujas, Gamybos metai: 2025, ZW580 magnetic chip collector Features: Magnetic chip collector designed for use in workshops and anywhere metalworking operations are carried out. Nkedpsv E Ixmofx Af Ijt Quickly and effectively cleans surfaces of metal chips. Simple to operate: pull the plunger to collect the chips, push it over a container to release them. Working length: 580 mm.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, Advantages of DC Chip Extractors - The purpose of the Vibra Motor shaking system is to provide consistent operational parameters and monitor the correct functioning of the extractor. - Heavy-duty construction enhanced with a radial fan guarantees maximum vacuum performance. - The extractor is designed for dry sawdust and chips. - Thanks to its airtight design, it is suitable for both indoor and outdoor operation. - Adapted for use in both overpressure systems (fans operate on the contaminated side of the dust collector) and underpressure systems (fans operate on the clean side of the dust collector). - The sound-insulated design and specially contoured impeller blades ensure quiet and efficient operation while minimizing energy consumption. - A key advantage includes the use of flexible and durable seals at critical points, improving the sealing of the entire system and preventing heat loss at connection points. - Multifunctional device with a modular system allowing for flexible extractor configuration. - Warm air recovery system. - Control cabinet equipped with an intuitive control panel for monitoring filter contamination status. - For filtration of smaller particles, an additional filter (e.g., HEPA) should be used. - It is strictly forbidden to use this extractor in explosive atmospheres. - The extractor is not intended for use with wet materials (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications: MOTOR POWER: 25 HP / 400 V, 50 Hz EXTRACTION CAPACITY: 21,750 m³/h INLET/OUTLET DIAMETER: 400 / 400 mm AIR VELOCITY: 28 m/s NUMBER OF FILTERS: 2 x 48 NUMBER OF WASTE BAGS: 8 DIMENSIONS (L x W x H): 4600 x 1700 x 3500 mm Nksdjx Agpzjpfx Af Ist WEIGHT: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Sąlyga: naujas, Gamybos metai: 2025, Device for extracting aluminum chips (not aluminum dust), steel chips, as well as grinding dust from machines and for cleaning the workstation. The use of a side channel blower makes the device ideal for connecting to machines where large amounts of chips are produced. It is equipped with a dust filter and a container (drawer) for dispensing by-products. Nkodpfxevuq Amo Af Ijt Machine features: - Fast and easy replacement of two filter cartridges - Large container for chips and shavings - Quick access to the collection container - Stable and MOBILE, compact housing - High container capacity - Efficient extraction Technical data: MOTOR S1 100%: 1.5 kW; S6 40%: 2.1 kW VOLTAGE: 400 V / 50 Hz SUCTION CONNECTORS: 2 x 100 mm EXTRACTION CAPACITY WITHOUT BAG: 2200 m³/h EXTRACTION CAPACITY WITH BAG/HOSE: 1500 m³/h DIMENSIONS: 850 x 670 x 765 mm WEIGHT: 72 kg

Sąlyga: naujas, Gamybos metai: 2025, Metal Swarf and Chip Extractor MDC800 230V The MDC800 metal extractor is a professional-grade device designed for the efficient extraction of swarf, chips, and dust generated during metalworking processes. With high performance, a robust construction, and user-friendly operation, this model offers reliable support for grinding and production stations where continuous cleanliness control is essential. Key Features - High extraction capacity – airflow up to 1800 m³/h ensures effective removal of even large quantities of metal chips. - Versatile application – ideal for extracting chips and swarf from grinders, polishers, and other metalworking equipment. - Compact and stable design – rigid steel housing ensures safe operation and minimizes vibration. - Quick access to the collection container – allows easy emptying and reduces downtime. - Easy filter replacement – convenient and straightforward access. Design and Technology The MDC800 is engineered for heavy-duty, continuous use in industrial environments. Its robust 0.75 kW motor operates at 2800 rpm, providing consistent and reliable airflow. The dual suction port system (2 × 100 mm) allows simultaneous connection of two workstations, significantly enhancing workplace efficiency. The large 325 mm impeller diameter increases the entire system’s aerodynamic efficiency and allows for extraction of larger metal chip fractions without clogging. The large-capacity collection bin supports long operating cycles without frequent emptying. Precision and Performance The MDC800 metal chip extractor ensures uniform and stable airflow whether one or both inlets are used. With extraction performance of 1800 m³/h (single inlet) and 1520 m³/h (dual inlet), it efficiently captures most contaminants generated during grinding, drilling, milling, and other machining operations. Applications This unit is ideally suited as: - An extractor for bench and belt grinders - A chip and swarf extractor in metal fabrication workshops - A metal dust extraction system in tool shops - A component of extraction installations for polishing and deburring processes Standard Equipment - Large-capacity chip collection bin - Replaceable filter - Dual 2 × 100 mm suction ports - Stable, compact steel casing Technical Data Motor: 0.75 kW, 230V Speed: 2800 rpm Suction ports: 2 × 100 mm Single inlet capacity: 1800 m³/h Dual inlet capacity: 1520 m³/h Impeller diameter: 325 mm Chip bag size: 330 × 500 mm Dimensions: 580 × 480 × 1016 mm Nksdpox E Udhefx Af Ist Weight: 55 kg

Sąlyga: naujas, Gamybos metai: 2025, Device for extracting aluminum chips and shavings (not aluminum dust), steel chips from machines, as well as for cleaning the workplace. The use of a side channel blower makes the device ideal for connecting to machines where a large amount of chips is generated. It is equipped with a dust filter and a container (drawer) for emptying the collected by-products. Machine Features - Quick and easy filter replacement - Large container for chips and shavings - Fast access to the collection container - Stable, compact housing - Large container capacity - Efficient extraction Technical Data MOTOR: 0.75 kW VOLTAGE: 230V or 400V / 50 Hz Nedpfx Afovugghs Iskt SUCTION INLETS: 1 x 100 mm EXTRACTION CAPACITY (WITHOUT BAG): 1800 m³/h EXTRACTION CAPACITY (WITH BAG): 1520 m³/h IMPELLER DIAMETER: 350 mm DIMENSIONS: 870 x 560 x 1170 mm WEIGHT: 31 kg

Sąlyga: naudotas, Gamybos metai: 2025, Įrenginys skirta aliuminio (ne dulkių), plieno drožlių ir skiedrų nutraukimui nuo staklių bei darbo vietos valymui. Šoninė turbina daro įrenginį idealiu prijungimui prie staklių, kur susidaro didelis kiekis skiedrų. Įrenginys turi dulkių filtrą ir konteinerį (stalčių) šalutiniams produktams išpilti. Mašinos charakteristikos: Nkodoxzrzaepfx Af Ijt Greitas ir lengvas filtro keitimas Didelis drožlių ir skiedrų konteineris Greita prieiga prie surinkimo konteinerio Stabili, kompaktiška korpusas Didelė talpa Efektyvus siurbimas Techniniai duomenys: VARIKLIS: 0,75 kW ĮTAMPA: 230 V / 50 Hz SIURBIMO ANTGALIS: 1 x 100 mm SIURBIMO GALIA BE MAIŠO: 1800 m³/h SIURBIMO GALIA SU MAIŠU: 1520 m³/h SPARNUOTĖS SKERSMUO: 350 mm MATMENYS: 870 x 560 x 1170 mm SVORIS: 31 kg Pastaba!! Mašina grąžinta. Mechaniniai korpuso pažeidimai, pažeista elektros dėžutė.

Sąlyga: naudotas, Gamybos metai: 2025, Chip and swarf extraction unit for aluminum (not aluminum dust) and steel chips from machines, as well as for cleaning the workplace. The use of a side channel blower makes the unit ideal for connection to machines generating large quantities of chips. It is equipped with a dust filter and a bin (drawer) for disposal of by-products. Machine features: - Quick and easy filter replacement - Large container for chips and swarf - Fast access to the collection bin - Stable, compact housing - High container capacity - Efficient extraction Technical specifications: MOTOR: 0.75 kW VOLTAGE: 400 V / 50 Hz Nsdpfxswl Dn Aj Af Iekt SUCTION INLETS: 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG: 1800 m³/h EXTRACTION CAPACITY WITH BAG: 1520 m³/h IMPELLER DIAMETER: 350 mm DIMENSIONS: 870 x 560 x 1170 mm WEIGHT: 31 kg USED EXTRACTOR: RETURNED ITEM, REPAINTED, VISIBLE PAINT MARKS, 100% FUNCTIONAL

Sąlyga: labai geros būklės (naudotas), KATALOGO NR. 6901 TECHNINIAI DUOMENYS - maksimalus tekinimo ilgis: 1200 mm - didžiausias tekinimo skersmuo: 210 mm - didžiausias tekinimo skersmuo su standartiniu atraminiu: 90 mm - didžiausias kvadratinės medžiagos įtekimo dydis su automatiniu padavimu: 100 mm - 3 hidrauliniai kopijavimo įrenginiai - papildomi 3 peiliai ant hidraulinių stūmoklių (sumontuoti 2 vnt.) - 4 pagrindinio veleno sukimosi greičiai - automatinis arba rankinis darbo režimas - pagrindinio veleno variklis: 9 kW - hidraulinės pompos variklis: 3 kW Nodpfxox Rdgpe Af Ijkt - ištraukimo angos skersmuo: 90 mm - transportavimo matmenys (ilgis/plotis/aukštis): 3700x2100x2000 mm - svoris apie: 3000 kg PRIVALUMAI – pagaminta Italijoje – automatinis hidraulinis kopijavimo įrenginys – originali DTR techninė dokumentacija – nedažyta – naudotas tekinimo staklės labai geros būklės Grynoji kaina: 63 900 PLN Grynoji kaina: 15 200 EUR Grynoji kaina apskaičiuota pagal 4,2 PLN/EUR kursą (reikšmingai svyruojant kursui, kaina gali keistis)

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Automatinis tekinimo staklės Triade TI-40 Tekinimo ilgis 400 mm Nsdpfxex Uq Rvo Af Ijkt Kopijavimo peiliai pagal šabloną 1 profilio peilis Automatinis medžiagos padavimas

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Automatinis tekinimo staklės Triade TI-30 Tekinimo ilgis 300 mm Nkjdox Uqtdjpfx Af Iot Šabloną sekantys peiliai 1 profiliavimo peilis Automatinis medžiagos padavimas

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Genini Miniautomat Through-Feed Automatic Lathe Automatic lathe for processing square timber Main spindle with two-speed motor: 4.9/5.9 kW Hydraulic pump motor: 1.5 kW Maximum workpiece length: 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Nksdpfxsx T A Uke Af Iet Two carriages with profile cutting tools 1 face spindle for drilling or face profiling 1 rough turning tool Machine weight: approx. 1800 kg

Sąlyga: labai geros būklės (naudotas), Automatinis tekinimo staklės Genini ROTOUR 100 Njdpfxox T Alcj Af Ijkt Didžiausias apdirbimo ilgis: 300 mm Didžiausias apskritas tekinimo skersmuo: Ø 140 mm, kvadratinis: 100×100 mm Veleno variklis: 15 AG Veleno greičiai: 2050-2800-4100-5600 aps./min Siurblio variklis: 3 AG Šlifuoklio variklis: 0,5 AG CE ženklinimas

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Automatinis tekinimo staklės Genini ROTOUR 100 Maksimalus darbinis ilgis: 300 mm Maksimali apdirbimo apvali skersmuo: Ø 140 mm, kvadratinė: 100×100 mm Veleno variklis: 15 AG Veleno greičiai: 2050-2800-4100-5600 aps./min Siurblio variklis: 3 AG Nkjdpox Tz Trjfx Af Iet Šlifuoklio variklis: 0,5 AG

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Automatinis tekinimo staklės Genini TBK 70 Išėjimo kvadratas 45×140 mm (apie 10 vnt./min – 600 vnt./val., su 2 šiurkščiais apdirbimo įrankiais ir 1 apdailos įrankiu) Maksimalus gaminamas blokas 70×70 mm Minimalus apdirbamas blokas 20×20 mm Nkedpfx Afsx Tzpgo Ijt Maksimali gaminama ilgis 300 mm Minimali darbinė ilgis 25 mm Veržlės variklio galia 5,5 AG (3,5 kW) Siurblio variklio galia 2 AG (1,5 kW) CE ženklas

Sąlyga: naudotas, Drožlių konvejeris, drožlių keltuvas, nuolydinis transporterio juosta, naudota mašina Gamintojas: Mayfran Tipas: POO.96M3806.01 Nodeydbzvepfx Af Iskt Bendri matmenys: Plotis: 6300 mm Gylis: 1050 mm Aukštis: 1820 mm Juostos dydis: 6600 × 330 mm Elektriniai duomenys: 400 V Sklendžių dydis: 30 mm Sklendžių žingsnis: 245 mm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras plotis: 2 000 mm, bendras aukštis: 2 200 mm, bendras ilgis: 1 900 mm, darbinis plotis: 1 300 mm, šlifavimo plotis: 1 300 mm, bendras svoris: 3 200 kg, aukščio reguliavimo tipas: elektrinis, stalo plotis: 1 300 mm, įėjimo įtampa: 400 V, transporto ilgis: 2 100 mm, transporto aukštis: 2 200 mm, transporto plotis: 2 000 mm, A high-performance wide belt sander, designed for processing wood-based panels, solid wood, plastics, and metal. Suitable for both rough and fine sanding, it ensures excellent surface quality as well as stable and reproducible results. The machine features two independently controlled sanding belt units, allowing the simultaneous use of two different grit sizes. Each sanding belt is equipped with individual speed control, effectively preventing scratches, overheating, and clogging of the abrasive. The conveyor belt table, in combination with precise height adjustment, allows sanding of materials up to 100 mm thick. Material thickness is set via a control panel with digital display, providing high accuracy and user-friendly operation. Each sanding drum is equipped with continuously variable speed control via frequency inverters, as well as sensors for belt tracking. These systems prevent lateral belt drift and automatically stop the machine in case of deviations to protect both the machine and the workpiece. The sander is equipped with a central extraction system and can be connected via Ø100-mm extraction ports to industrial dust collection systems or vacuum cleaners. In addition, each sanding belt has a pneumatic cleaning system that continuously removes sanding dust during operation. Changing sanding belts is quick and uncomplicated—by releasing a single tensioning device, the belt can be removed. The machine is compatible with standard sanding belts joined with tape. No special or proprietary abrasives are required. Njdpfxomrqlnj Af Iekt MAIN FEATURES • Working width: 1300 mm • Two independently controlled sanding belt units • Simultaneous use of two different grit sizes possible • Stepless speed adjustment of each sanding belt (frequency inverter) • Sanding capacity up to 100 mm material thickness • Conveyor belt table with height adjustment • Digital control panel • Pneumatic belt tensioning system • Pneumatic belt cleaning system • Extraction ports Ø100 mm • Fast and easy sanding belt change • Semi-automatic operation Condition of the machine: The machine is in very good condition. It has only been used for short-term demonstration purposes.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Locatelli Ariete 3 Automatic Lathes Maximum/minimum workpiece length: 1000/200 mm Maximum/minimum workpiece section: 85×85 / 20×20 mm Maximum length of material to be machined: 120 mm with hole, 150 mm without hole Automatic bar feeder CE certificate Complete technical documentation (DTR) Main motor power: 3/4 kW Nksdpfx Asx Thw Def Iet Two spindle speeds: 2500/3600 rpm Oil pump motor: 2.2 kW Operating pressure: 6-8 bar

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Automatinis tekinimo staklės TRD-45 skirtos mažų matmenų detalių gamybai, kurių didžiausias skersmuo – 45 mm. Techninės savybės: - Automatinis mašinos valdymas - Hidrauliniai peilių ir griebtuvų mazgai turi atskirą reguliavimo galimybę - Automatinis ruošinio padavimas, maksimalus ilgis – 700 mm - Minimalios ruošinio atliekos (20 mm) - Programuojamas pagrindinio įrankio darbinis poslinkis - Rankinis pradinis nustatymas ir visiškai automatiniai darbo ciklai TECHNINIAI DUOMENYS - Maksimalus ruošinio ilgis: 700 mm Nksdpex Ut Htofx Af Iet - Maksimalus tekinamos detalės ilgis: 120 mm - Maksimalus tekinamos detalės skersmuo: 45 mm - Špindelio apsisukimų dažniai: 3000/3900/4800 aps./min - Špindelio variklis: 4 kW - Hidraulinės pompos variklis: 1,5 kW - Ruošinių griebtuvai nuo 12 iki 45 mm - Našumas: 450–900 vnt./val. - Minimalios/maksimalios ruošinio atliekos: 20/40 mm - Grynasis/bruto svoris: 1100/1450 kg.

Sąlyga: geras (naudotas), Medieninis frezavimo įrankis, frezos galva, frezavimo įrankis, medžio freza, profilio freza Nkjdpfx Asb D I D Hjf Ist -Išorinis skersmuo: Ø 150 mm -Aukštis: 20 mm -Tvirtinimas: Ø 30 mm -Kiekis: 1 freza -Matmenys: 150/150/H20 mm -Svoris: 2,2 kg

Sąlyga: beveik kaip naujas (naudotas), DEMO MACHINE Nksdpfx Afjycc Tde Iot For sale is an as-new JET belt and disc sander JSG-31A with a disc diameter of 300 mm. The exhibition machine is in its original condition, so you receive the full warranty. Technical Specifications - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm - Disc speed: 2,700 rpm - Sanding table size (disc): 230 x 420 mm - Sanding table tilt range (disc): -45° to +15° - Belt dimensions: 150 x 1,220 mm - Belt speed: 11.5 m/sec - Sanding table size (belt): 190 x 330 mm - Sanding table tilt range (belt): -45° to 0° - Sanding arm tilt range (belt): 0° - 90° - Dust extraction connection: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping via freight forwarder: Austria: € 70.00 incl. VAT Germany: € 90.00 incl. VAT South Tyrol: € 110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sander, professional, workshop, stationary, machine Reference: R-A0117

Sąlyga: beveik kaip naujas (naudotas), DEMONSTRATION MACHINE For sale is an almost new JET twin-drum sander DDS-237 equipped with a powerful 400 V motor delivering 7.5 HP and a maximum sanding width of 940 mm. This demonstration machine remains in its original condition, providing you with the full warranty. Technical Specifications - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed speed: 3 m/min - Max. sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum (each): 152 x 940 mm - Abrasive belt width: 75 mm or 100 mm - Dust extraction ports: 2 x 100 mm diameter - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Nedpfsycc R Nox Af Iskt Shipping via freight carrier: Austria: €180.00 incl. VAT Germany: €210.00 incl. VAT South Tyrol: €240.00 incl. VAT Related terms: JET DDS-237, twin-drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400 V industrial, 940 mm working width, feed system, workshop machine, professional sanding unit Reference: R-A0117

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Parduodamas Homag CNC medžio apdirbimo centras. Judėjimo eigos X/Y/Z: 5000mm/1300mm/600mm, didžiausias ruošinio storis: 300mm, stalo matmenys X/Y: 4175mm/1550mm, pozicionavimo greitis X/Y/Z: 80m/80m/30m/min, verpstės galia: 15kW, apsisukimų dažnis: 24 000 aps./min, įrankio laikiklis: HSK-63F. Yra dokumentacija. Galima apžiūra vietoje. Nodpfx Afoyddz Sj Iokt

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1975, Funkcionalumas: visiškai funkcionalus, Pilna įranga, centrifuga E 700 H/1, būgnas 690/720/600 mm, būgno talpa 120 l, apsukos 735 aps./min, sienelės storis 12 mm, medžiaga GS 45, maks. įkrova 300 kg, užkrovos per valandą 10, šildymas 8 kW, darbinė įtampa 380 V, bendra prijungta galia 35 A, kėlimo įrenginys užpildymui, vibracinė išleidimo sistema drožlėms ir detalėms, 3 separavimo būgnai su skirtingais kiaurymų raštais. Drožlių transporterio juosta į laužo konteinerį. Įranga gali būti demonstruojama įjungta tinkle. Iš gamybos vietos: išmontavimas ir pakrovimas į kainą neįeina. Galima suteikti pagalbą ir yra šakinis krautuvas. Išmontuotų dalių maksimalus svoris 2 t. Njdpfx Aew Evy Rjf Ijkt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, DEMONSTRACINĖ MAŠINA Parduodama mažai naudota Drechselmeister Stratos FU 230 tekinimo staklės su 680 mm tarp centrų ir 2 AG varikliu. Demonstracinė mašina yra labai geros būklės. Techniniai duomenys - Centro aukštis: 230 mm - Sukimosi skersmuo: 455 mm (su papildoma išorinio tekinimo įranga iki 800 mm!) - Atstumas tarp centrų: apie 680 mm (galima praplėsti!) - Veleno jungtis: M33 x 3,5 (grūdintas) su ASR (Euro) saugos grioveliu* - Velenas ir priešvėlenis: MK2 kūgis - Sukimosi greičiai (2 diržo padėtys): 60–1.350 aps./min ir 180–3.750 aps./min - Pinolės eiga: 100 mm (su skale ir trapeciniu sriegiu) - Variklis: 2 AG (230 V maitinimas) - Svoris: 178 kg Mašina yra A-5431 Kuchl ir gali būti apžiūrėta bet kuriuo metu mūsų darbo valandomis. Tarpinis pardavimas galimas! Susiję terminai: tekinimo staklės, tekinimo mašina, tekinimo suolas, medžio tekinimas, tekinimo įrankiai, įranga Nedjyaphvspfx Af Iokt Nuoroda: R-A0117