Macmon M 100 pirkti naudotą (16)

Būklė: geras (naudotas), Gamybos metai: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital readout, from a training department, fixed table, SK 40 spindle taper. In good, operational condition; can be demonstrated under power by arrangement. Godpfev Azb Njx Amxoiw

Būklė: naudotas, Gamybos metai: 1990, Universalioji įrankinė frezavimo staklė Gamintojas: MACMON Modelis: M 100 E Pagaminimo metai: 1990 – patikrinta dirbtuvėse Staklių Nr.: 1479 Geometrinis priėmimas su bandymo protokolu Priedai: - 3 ašių skaitmeninis indikatoriaus K+C Arbah-M, naujas - Fiksuotas stalas 600 x 210 mm (T-itrėžis: 12 mm) - Vertikalus frezavimo galvutė SK 40 su traukos sriegiu S 20 x 2 - Aušinimo įranga - Naudojimo instrukcija Gjdpox Ada Rjfx Amxeiw Naudota, kaip parodyta, be garantijos Staklės techniškai atitinka gamybos metų būklę.

Būklė: naudotas, Gamybos metai: 1973, x-axis travel: 290 mm Gisdjtqqn Ropfx Amxjw y-axis travel: 170 mm z-axis travel: 310 mm Table clamping surface: 600 x 215 mm Spindle taper: SK 40 Spindle speeds: 50 - 2500 rpm Feeds: 9 - 450 mm/min Quill stroke: 70 mm Total power requirement: 1.8 kW Machine weight approx.: 860 kg Machine dimensions (L x W x H): 1.06 x 1.05 x 1.33 m Accessories: vertical head with extendable quill, fixed table, counter bearing, coolant device

Būklė: naudotas, Gamybos metai: 1999, x-travel 290 mm y-travel 170 mm z-travel 310 mm Gijdpfx Amswngkrexow Table clamping surface 600 x 210 mm Spindle taper SK 40 Spindle speeds 50 - 2600 rpm Feeds 9 - 450 mm/min Quill stroke 70 mm Total power requirement 5.5 kW Machine weight approx. 720 kg - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, Heidenhain 3-axis digital readout, various short milling arbors, coolant system

Būklė: geras (naudotas), Gamybos metai: 1990, Macmon M 100 E universal milling machine with 2-axis Elesta-Heidenhain digital readout from a training department, fixed table, SK 40 spindle taper. Good, ready-to-operate condition, can be demonstrated under power by arrangement. Gisdsrazzrepfx Amxsw

Gamybos metai: 1978, būklė: labai geros būklės (naudotas), Macmon M 100 D tool milling machine with 3-axis Fagor digital readout, from a training department, featuring a fixed table and SK 40 spindle taper. Accessories include various collets and milling arbors. The machine is in very good, operational condition and can be demonstrated under power by appointment. Giodpfx Ashtfubemxow

Gamybos metai: 1997, būklė: geras (naudotas), Macmon M 100 RE universal milling machine with 3-axis Heidenhain digital readout, from training department. Fixed table, SK 40 spindle taper. Accessories: electric spindle guard, various collets and cutter arbors. Good, fully operational condition, can be demonstrated under power by arrangement. Giedpjhgmmzjfx Amxow

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: neveikiantis, atsarginių dalių donorinis Gijdsyyaplspfx Amxsw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Įrankinė frezavimo staklė Macmon M 100 NC Bežingsninis apsukų reguliavimas, Įrankio laikiklis SK 40 Aušinimo įrenginys Gsdpfx Ajx Hga Djmxsiw Eksploatacijos instrukcija

Būklė: naujas, Gamybos metai: 2025, padavimo ilgis X ašis: 300 mm, padavimo eiga Y ašimi: 165 mm, padavimo ilgis Z ašis: 280 mm, X ašies eiga: 310 mm, Y ašies eiga: 170 mm, Z ašies eigos atstumas: 330 mm, plunksnos brūkšnys: 70 mm, veleno greitis (maks.): 2 600 aps./min, veleno greitis (min.): 40 aps./min, bendras svoris: 730 kg, Dear Sir or Madam, We are pleased to offer you the Macmon M100 NC. This is a real all-rounder, ideal for training and small series production. The Macmon combines a conventional base with a Heidenhain TNC128 CNC path control, making this model an absolute must-have in certain working environments. And best of all: with a footprint of just one square meter, this machine fits into any workshop! Technical standard specifications: • Heidenhain TNC 128 control (integrated in the operator panel) • Ribbed cast iron construction with hardened and ground guideways on both column and support • Vertical head swivels 360º • Extendable quill, stroke 70 mm • Removable vertical head for changing between vertical and horizontal milling operations • Prism guides on all axes • Ground leadscrew on all axes • Mechanical tool clamping for both vertical and horizontal spindle • Tool holder ISO 40 for tools as per DIN 2080 AT 3 with pull stud thread S 20 x 2 or M 16 • Fixed angle table 215 x 600 mm, T-slots 4 x 12 H7 (spacing 45 mm) • Vertical clamping surface 195 x 640 mm, T-slots 2 x 12 H7 (spacing 90 mm) Gsdex H Nw Sopfx Amxjiw • HEIDENHAIN linear position measuring system, direct, resolution 0.001 mm • Positioning accuracy 0.02 mm, repeat accuracy 0.005 mm • Horizontal milling device, console and end support • Chip tray, blue RAL 5019 • Paint finish: blue RAL 5019, grey RAL 7035 • 1 operating manual • 1 programming instructions CD for TNC 128 • 1 inspection report and basic wiring diagram • 1 hand-operated oil pump • With counter bearing, bearing sleeve ø 16 mm (sliding bearing) for milling arbor length 230 mm • Machine lamp • Chip guard (protective device required as per EN 13128 for EU countries)

Būklė: geras (naudotas),

Būklė: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, Universal Tool Milling Machine Manufacturer: MACMON Model: M 100 ADR Technical Data: - Heidenhain TNC124 control - Machine number: 7989 - Year of manufacture: 1998 - Travel: X 310 mm, Y 170 mm, Z 330 mm - Speed range: 40-2500 rpm (infinitely variable in 2 ranges) - Feed: 10-800 mm/min (infinitely variable) - Rapid traverse: 800 mm/min - Equipment: Vertical & horizontal spindle (including lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 taper - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg - Required space: 1000 x 1160 x 1400 mm Gjdpfxsrwml Aj Amxeiw Including complete documentation The machine can be tested or demonstrated under power on site by arrangement. All information is provided without guarantee. Subject to prior sale. The item is sold excluding any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, or for injury to life, limb, or health.

Būklė: paruoštas naudoti (naudotas), Įrankinė frezavimo staklė MACMON M100 su skaitmeniniu indikatoriumi - Skaitmeninis indikatorius - Eigos X/Y/Z: 310x340x170 mm - Sukimosi greitis: 40-2500 aps./min. Giedpfx Amjzdui Eexow - Automatiniai padavimai - Žingsniuotas padavimo diapazonas 9 - 450 mm/min - Įrankio tvirtinimas ISO 40 - Pasukamas vertikalus galvas - Gręžimo pinolė / vertikalus galvas 70 mm - Horizontalaus / vertikalaus frezavimo įrenginys - Standus kampinis stalas 600x225 mm - Aušinimo sistema - Variklio galia 2,5 kW - Drožlių surinkimo padėklas - Darbo lempa - Staklių kojos - Dokumentacija Matmenys: IxPxA 1,5x0,8x1,7 m / Svoris 950 kg Galimos klaidos ir netikslumai

Būklė: geras (naudotas), Gamybos metai: 2005, Internal item no.: 24012 Universal Milling Machine Macmon M100 NC Year of manufacture: 2005 Control: Heidenhain TNC124 + Coolant pump + Machine vice Travels: X 310 / Y 170 / Z 330 mm Spindle speed: 40–2000 rpm Giedorywa Rspfx Amxew Spindle taper: SK40 Dimensions (LxWxH): 1200 x 1600 x 1850 mm Weight: approx. 1000 kg

Būklė: geras (naudotas), Gamybos metai: 2008, padavimo ilgis X ašis: 400 mm, padavimo eiga Y ašimi: 250 mm, padavimo ilgis Z ašis: 400 mm, Heidenhain TNC 124 control Quill electronic handwheel coolant system Technical data: Giedpfx Ajrb A Tcomxjw Longitudinal travel (X-axis): 400 mm Cross travel (Y-axis): 250 mm Vertical travel (Z-axis): 400 mm Table clamping area: 600 x 320 mm Spindle taper: SK40 Spindle speed range: 30–6300 rpm Feed X, Y, Z: 10, 10, 8 m/min Total drive capacity: 6.5 kW Weight approx.: 1200 kg Technical data, accessories and descriptions of the machine are non-binding.

Būklė: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Milling Machine Macmon M 434 NC Manufacturer: Macmon Model: 434 NC Control: Heidenhain TNC 128 Year of manufacture: 2008 Condition: used X-axis travel: 400 mm Y-axis travel: 250 mm Z-axis travel: 400 mm Clamping area: 600 x 320 mm Main drive: AC motor 3 kW Speed range: - Vertical infinitely variable 30 – 6300 rpm - Horizontal infinitely variable 0 – 4200 rpm Feed rate: 0 – 10 m/min Tool holder: ISO 40 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Weight: 1200 kg Scope of delivery: - Documentation - Machine feet Gjdpey Egccofx Amxsiw - Coolant unit - Spindle guard - Machine light - HR410 handwheel - Horizontal spindle counter-support