Lentyna Vežimėlis pirkti naudotą (7 150)

Būklė: naujas, Plokščių pasukamas vežimėlis naujas tinka Fimal Concept 350 spaudimo balkio formatinio pjūklo modeliui Djdpfx Ajw I U A Isc Deur pilnas komplektas su 4 besisukančiais ratukais (2 su fiksatoriumi) 12 visomis kryptimis judančių ratukų ir sulankstomas atraminis stalas Prieinamumas: greitai pristatomas Sandėliavimo vieta: Hochheim

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, veikimo valandos: 1 604 h, keliamoji galia: 2 500 kg, kuro tipas: elektrinis, pavaros tipas: Elektro, Žemo kėlimo vežimėlis Būklė: Paruoštas naudojimui ir visiškai veikiantis Techninė būklė: gera Dujdpfeyt Tvwox Ac Dsr Akumuliatoriaus įtampa: 24V

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level. Dsdpsfdkb Tefx Ac Deur

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards Dusdpfoh R Taqex Ac Dor - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: Dsdpfx Acomhhypj Dsur - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing Djdpfx Acjmhh Dho Djur - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. Dusdsmhh Dzepfx Ac Dor According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. Dedsmhh Anjpfx Ac Djur The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Duedpfxjguk A Ho Ac Dor Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) Dujdomhhy Njpfx Ac Der - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Dujdoguk Dkspfx Ac Dsr Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. Dujdpfx Asmhh Dtec Dor The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. Duodjguk Dvepfx Ac Dsr The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: naudotas, mašinos/transporto priemonės numeris: IC1231, Gamybos metai: 2020, veikimo valandos: 668 h, keliamoji galia: 1 300 kg, apkrovos centras: 600 mm, šakių ilgis: 1 150 mm, bendras svoris: 179 kg, variklio tipas: Elektrinis, gamintojas: Jungheinrich Djdpfjx I Th Dex Ac Djur

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 10/1999, bendras ilgis: 13 300 mm, bendras plotis: 2 500 mm, bendras aukštis: 1 300 mm, pakaba: oras, padangos dydis: 385/65R22,5, spalva: kitas, Gamybos metai: 1999, Įranga: ABS,

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 04/2014, krovimo vietos ilgis: 13 350 mm, krovinių skyriaus plotis: 2 510 mm, krovos erdvės aukštis: 2 690 mm, bendras ilgis: 14 100 mm, bendras plotis: 2 600 mm, bendras aukštis: 4 000 mm, pakaba: oras, padangos dydis: 385/65R22,5, ratų bazė: 8 910 mm, spalva: kitas, Gamybos metai: 2014, Įranga: ABS,

Būklė: geras (naudotas), ašių konfigūracija: 3 ašys, pirmoji registracija: 09/2015, bendras plotis: 2 470 mm, pakaba: oras, padangos dydis: 385/55R22.5, spalva: oranžinė, Gamybos metai: 2015,

Būklė: geras (naudotas), ašių konfigūracija: 3 ašys, pirmoji registracija: 09/2014, bendras plotis: 2 470 mm, pakaba: oras, padangos dydis: 385/55R22.5, spalva: juodas, Gamybos metai: 2014,

Būklė: geras (naudotas), ašių konfigūracija: 3 ašys, pirmoji registracija: 09/2015, bendras plotis: 2 470 mm, pakaba: oras, padangos dydis: 385/55R22.5, spalva: oranžinė, Gamybos metai: 2015,

Būklė: naudotas, rida: 251 000 km, galia: 162 kW (220,26 AG), pirmoji registracija: 11/2002, kuro tipas: dyzelinas, bendras svoris: 12 000 kg, ašių konfigūracija: 2 ašys, stabdžiai: retarderis, spalva: sidabras, pavaros tipas: mechaninis, emisijos klasė: Euro 6, Įranga: ABS, autonominis šildytuvas, kompresorius, navigacijos sistema, oro kondicionavimas,

Būklė: naujas, Gamybos metai: 2026, Reinforced SPCC steel construction – ensures stability and durability for many years. Stainless steel 201SS worktop – resistant to oils and greases. 7 fully extendable drawers on ball-bearing slides – smooth operation and secure closing. Individual drawer locking – safe handling during transport or movement. Central locking system plus side cabinet lock – protects tools from unauthorized access. Large 12.5 cm (4.9 inch) rubber casters with brakes – high mobility even on uneven surfaces. Ergonomic maneuvering handle – comfortable and precise handling. Reinforced all-metal design – ideal for professional use. The ideal choice for workshops, service centers, mechanics, and demanding DIY enthusiasts. Dodpfx Aeyi Uhasc Djur Product dimensions: 770 x 465 x 800 mm Dimensions with casters and handle: 840 x 465 x 965 mm Net/Gross weight: 48 kg / 52 kg Material: SPCC (cold-rolled steel) Worktop: Stainless steel 201SS 12.5 cm (4.9 inch) rubber casters, two with brakes Number of drawers: 7 Small drawer dimensions: 53 x 39 x 6.8 cm; Large drawer dimensions: 53 x 39 x 15 cm Additional accessories: Side doors, 2 sets of keys, user manual

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, veikimo valandos: 4 782 h, keliamoji galia: 2 000 kg, kuro tipas: elektrinis, pavaros tipas: Elektro, Žemo kėlimo vežimėlis Būklė: Paruoštas naudojimui ir visiškai veikiantis Techninė būklė: gera Dusdpfeytk Sisx Ac Der Akumuliatoriaus įtampa: 24V

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 04/2015, krovimo vietos ilgis: 13 400 mm, krovinių skyriaus plotis: 2 500 mm, krovos erdvės aukštis: 655 350 mm, bendras ilgis: 14 100 mm, bendras plotis: 2 600 mm, bendras aukštis: 4 000 mm, pakaba: oras, padangos dydis: 385/65R22,5, ratų bazė: 8 910 mm, spalva: kitas, Gamybos metai: 2015, Įranga: ABS,

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, kėlimo aukštis: 8 000 mm, keliamoji galia: 6 300 kg, DEMAG keltuvo bėginė važiuoklė labai gera naudota ir patikrinta būklė žymiai pigiau nei gamintojo nauja kaina Dedpoyy Ngasfx Ac Djur Informacija: turime virš 20 000 DEMAG dalių sandėlyje! Peržiūrėkite ir kitus mano sandėlio pasiūlymus!

Būklė: labai geros būklės (naudotas), KATALOGO NUMERIS 7896 TECHNINIAI DUOMENYS Dedpfjykat Rox Ac Djur - veleno skersmuo 30mm - darbinis veleno aukštis 125mm - keičiama velenas - veleno fiksavimas - reguliuojama aukštyn/žemyn + kampas - reguliuojamas atrama - 4 sukimosi greičiai + į dešinę/kairę 1400/3500/6000/8000aps./min - stalo matmenys 1000x550mm - ketaus stalas - su slankiojančiu vežimėliu 1150x350mm - prispaudėjas - kampinis liniuotė - variklis 4kW - stabdys - ištraukimo antgalio diametras 2x120mm - matmenys ilgis/plotis/aukštis 1320x1550x1200mm - svoris 400kg PRIVALUMAI – bulgariška gamyba – su slankiojančiu vežimėliu - su pasviru velenu – naudotas frezavimo staklės – labai gera būklė Grynoji kaina: 12900 PLN Grynoji kaina: 3070 EUR pagal 4,2 EUR kursą (Kainos gali keistis dėl reikšmingų kursų svyravimų)