Kigo Miltelių Danga pirkti naudotą (1 008)

Gamybos metai: 2008, būklė: naudotas, Darbinė būklė! Nledpfsxlflgjx Acpea - 4 ašys - Detalės aukštis iki 100 mm - 3 vožtuvai - 2 pakreipėjai vožtuvų pakreipimui - 2 bakeliai - Išorinis programavimo kompiuteris

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter surface area: 160 m² • Automatic filter cleaning • Air consumption: max. 12 L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector equipped with a high-efficiency radial impeller • Two operating modes: Full Power and ECO • The base weight of the filter material is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter fitted with an individual solenoid valve Nedpfx Asfz Dqxscpjla

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle Nsdsfz I Rmjpfx Acpola • 50 L waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² Nsdpfxsfz I R Rj Acpela • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² • High suction performance with low energy consumption Nledpefz I Sgofx Acpea • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m² • Automatic filter cleaning Nljdefz Dqfopfx Acpsa • Air consumption max. 12 L, 6-8 bar per cycle • 50 L waste container capacity Description: • Dust collector with an efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the filter media used is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter exchange • Each filter has its own solenoid valve

Gamybos metai: 2020, būklė: naujas, Automation Nsdsflq Spjpfx Acpjla Use of a photoelectric cell The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece, giving you the capability to activate the spray guns only when the object is within range, and to deactivate the guns immediately after processing is complete. The photoelectric cell is included in the standard equipment package. Identification of parts using special tags. A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, identifies the coated part, activates or deactivates the guns at the correct time, thereby reducing energy and powder consumption. Vertical detection of workpiece features. By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the timing for when the part is due to appear in the gun area, allowing for selective activation or deactivation of the guns. Use of light barriers with multiple horizontal and vertical sensors. This solution enables precise measurement of the dimensions of the workpiece, allowing manipulators to be adjusted as well. Advantages of using gates and photoelectric cells The main advantages of using photoelectric cells or light barriers are energy and powder savings. It eliminates coating zones without workpieces. By using light barriers, precise gun control is achieved. Our lines can optionally be equipped with photoelectric cells or light barriers. The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece and, therefore, to activate spray guns only when the object is within their operational range, and to deactivate the gun immediately upon completion of coating. Identification of parts with special tags A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, recognizes the coated part, switching the guns on or off at the appropriate time – thereby saving energy and powder. By using light barriers with horizontal detectors, the PLC can analyze the vertical geometry of the workpiece. The PLC determines when the part will appear in the gun chamber, enabling selective activation or deactivation of the spray guns. Use of light barriers with multiple horizontal and vertical sensors This solution allows for the precise measurement of the workpiece's dimensions, enabling adjustment of the manipulators. The primary benefits of using photoelectric cells or light barriers are powder and energy savings. It eliminates painting areas without workpieces. Using light barriers ensures precise gun control. Vertical array of spray guns 8 pcs. guns Control – profiControl 10" Cyclone – CK-D1250 Dust collector – OZ-8H Center – RP-01 + SV-200 Manipulator MA1-23 x 2 pcs. Axis X MX-100 x 2 pcs. Horizontal gate – Horizontal gate W400 x 2 units Vertical gate – H2000 vertical gate The maximum coating speed is 1.65714285714286 m/min 0 pcs. tractors Air volume required: 10,188 m³/h for operation Minimum cabin passage required: W900mm H2100mm Duct diameter 500 mm – minimum 16.9 m/s 16 m/s Air consumption: 1210 l/min + Sug. SC-20 compressor Min. St

Gamybos metai: 2020, būklė: naujas, 7" Touch Panel Njdpfx Acsfy Txyopsla The large color touch panel is aesthetically pleasing and provides comfortable and intuitive operation. All key parameters can be set directly on it. Memory for 20 Programs with 10 Events It is possible to store up to 20 programs and activate up to 10 consecutive time-temperature events, arranged within the heating curve. This is especially required for more demanding processes. Gas / Oil Consumption Data Consumption is calculated based on the burner settings. This function allows you to estimate the cost of each specific cycle, plan consumption, and monitor personnel. Dual-Channel Recorder with USB Cycle Parameters Each furnace is equipped with a recorder that logs all ignition parameters, including two temperature channels—similar to a flight data recorder—onto a USB stick. The system also allows analysis of monthly/daily reports, including media consumption and performance. Every heating cycle, each time the door opens, is tracked for several years. Such a dedicated solution is not offered by any other manufacturer. It is a system developed from scratch by our programmers: automatic smoke extraction flue The chimney can be programmed to open several minutes before the end of the firing process to vent the chamber. It can be remotely controlled from the control panel and does not need to be operated mechanically as with most systems. Minute-by-Minute End Time Forecast The cycle has started—how long will it last? If we calculate the heating dynamics, the system will display the remaining duration on the screen. To open, simply pull the door. The lock features adjustable pressure on the door. To close, just push it shut—the lock catches the door and retracts it automatically. To minimize heat loss in the hall when the door is opened, a hood is installed above the door to divert part of the heat elsewhere. The MTS system was developed to provide true readings of the oven chamber temperature. Standard measurements are based on a single temperature reading, which is often inaccurate. MTS is a multi-sensor system, with sensors located at the furthest points of the chamber. The multi-zone heating system ensures a previously unmatched firing quality.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Nlsdpfxsfzkqmj Acpoa Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter surface area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per pulse • 50 l waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • Base weight of the filter material used: up to 260 g/m² Nsdpfx Asfz Dqmjcpola • High suction performance with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs • Filter area: 160 m² • Automatic filter cleaning • Air consumption: max. 12L, 6-8 bar per cycle Nljdpfx Aefz Dq Ajcpea • 50 L waste container capacity Description: • Dust collector with efficient radial impeller • Two operating modes – Full Power and ECO • The base weight of the material used in the filter is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter is equipped with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 units • Filter area: 160 m² • Automatic filter cleaning • Air consumption max. 12 L 6-8 bar per pulse • 50 L waste container capacity Nsdpfxofz Dttj Acpela Description • Dust collector equipped with an efficient radial impeller • Two operating modes – full power and ECO • The base weight of the filter material used is up to 260 g/m² • High suction performance with low energy consumption • Waste container for easy removal of paint residues • Inspection door for filter replacement • Each filter fitted with its own solenoid valve

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Njdpfx Acefz U S Ejpola Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naujas, Gamybos metai: 2025, Powder Coating Set Powder Coating Oven: 1200 x 3000 x 1800 mm Powder Coating Booth: 2800 x 2200 mm Oven / Dryer Technical Specifications: Working dimensions: 1200 x 3000 x 1800 mm Power consumption: 33 kW Maximum operating temperature: 230°C Equipment: Internal trolley External trolley Hot air circulation (ensures even temperature distribution throughout the oven) Safety latches for secure opening and closing Powder Coating Booth Working dimensions: 2800 x 2200 mm Fan power: 2.2 kW Fan air flow: 10,500 m³/h Very quiet operation Njdpfx Acog Uw Dkjpola Automatic filter cleaning CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products of the BUMEX SP. Z O.O. brand have a WE certificate. We offer our own transport – prices are agreed individually for each offer. We issue invoices with VAT shown separately. Short lead times! Possibility to order machines in various, customized configurations and dimensions! Please do not hesitate to contact us.

Gamybos metai: 1999, būklė: labai geros būklės (naudotas), Rovema VPI 260E vertical form-fill-seal (VFFS) machine with powder dosing unit. Optional with new control system/user interface upon request. Nlodpfxeiwdgpe Acpea

Gamybos metai: 2022, būklė: beveik kaip naujas (naudotas), Rovema VPX 250, completely refurbished, equipped with new Rovema powder dosing system, Siemens S7 control, 12-month warranty! Nledjhtfdwopfx Acpja

Gamybos metai: 1988, būklė: paruoštas naudoti (naudotas), A powder tower system, a chimney, and a burner for the food or dairy processing industry, especially for the production and drying of milk powder or similar products, are available. 1) Powder Dryer APV, Type II K, Year of Manufacture: 1988, Water Evaporation Capacity: 1000 kg/h, Products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction, and two atomizer and nozzle systems. 2) Steel Chimney Fűtőker, Year of Manufacture: 2022, Diameter 1/2: 800 mm/600 mm, Height: 20,500 mm. 3) Burner Weishaupt WM-G20/3-A, Year of Manufacture: 2014. Documentation available. On-site inspection possible. Nlodpfx Acjvmq Tiopsa

Būklė: naudotas, Four in a Row – The Success Building Blocks of DLK – Storage Technology | Levelmaker® | Logistics | Solutions WE OFFER Panel size: 2,500 mm x 2,000 mm x 38 mm P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding quote tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. Njdpfx Aevdqhbscpsla PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The indicated price is per piece/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing the applicable VAT. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commerce, industry, and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us with any questions.

Būklė: naudotas,

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 700 kg, ruošinio aukštis (maks.): 2 300 mm, ruošinio ilgis (maks.): 6 000 mm, izoliacinė medžiaga: Mineralwolle, izoliacijos storis: 150 mm, ruošinio plotis (maks.): 2 000 mm, Complete system with chemical pre-treatment (7 zones) for GSB certification (QUALICOAT) (multi-metal capability) All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Pre-treatment cabin including reverse osmosis unit - Walk-in coating booth - Powder spray gun - Powder curing oven - Dryer - Manual conveyor system - Lift-lower station - Electrical control system Details: 1. Walk-in cleaning cabin, pre-treatment for steel and aluminium The cleaning cabin is designed for automatic cleaning and allows spraying at medium pressure. The cabin has 7 different spray tanks. Maximum part sizes: L=6000 mm, W=2000 mm, H=2300 mm. 1. Cabin dimensions: Length: 6,500 mm | Width: 3,000 mm | Height: 3,600 mm 2. Full pre-treatment section: Length: 6,600 mm | Width: 4,640 mm | Height: 4,300 mm Process steps: 1. Degreasing / neutral pickling: Heated tank, 50-55°C, time = 3-6 min, drip-off time = 80 sec 2. Acidic mineral pickling: Heated tank, 50-55°C, time = 3-6 min, drip-off time = 80 sec 3. Rinse 1: Rinsing with ambient temperature water, time = 0.75-1.5 min, drip-off = 1 min 4. Rinse 2: Rinsing with ambient temperature water, time = 0.75-1.5 min, drip-off = 45 sec 5. Rinse 3: Rinsing with ambient temperature water, time = 0.75-1.5 min, drip-off = 45 sec 6. Nano-ceramic: At ambient temperature, time = 0.75-1.5 min, drip-off = 60 sec 7. Overhead spray ring for post-rinsing after process 6: Rinse at ambient temperature, time = 1 min, drip-off = 60 sec 8. Passivation, no-rinse for aluminium: Rinse at ambient temperature, time = 2-3 min, drip-off = 1-2 min 1.1. Reverse osmosis unit Reverse osmosis capacity: 250 l/h 1.2. Oil skimmer Tank No. 1 is equipped with an oil skimmer “UniSkim-21-100.” Design: The spray system is two-part and movable, operated via a pneumatic push system with up to 500 mm travel. The return feed to the tanks is also movable using a pneumatic push system with 7 positions, serving the 7 tanks. 2. Walk-in coating booth 1. Cabin dimensions: Length: 7,400 mm | Width: 4,000 mm | Height: 3,236 mm 2. Cabin with extraction: Length: 8,552 mm | Width: 6,232 mm | Height: 4,393 mm The booth has 2 pneumatic doors (one-sided) for workpiece loading/unloading as well as 1 side door for the operator. 3. Powder coating system Wagner, manual type “Sprint 2 B” 4. Powder curing oven - Internal dimensions: Length: 6,500 mm | Width: 2,200 mm | Height: 3,416 mm 5. Dryer - Internal dimensions: Length: 6,500 mm | Width: 1,200 mm | Height: 3,416 mm 6. Manual conveyor system Nodpjffv Tpefx Acpjla The conveyor system consists of: It is designed for a cross beam weight of 700 kg, the carriage supports max. 2,000 kg on 3 rails.

Būklė: naujas, Gamybos metai: 2025, Miltelių įkaitinimo krosnis 3.500 x 1.900 x 2.000 mm Njdpefhv Tcofx Acpela 1. Vidinis matmuo Ilgis: 3.500 mm 2. Vidinis matmuo Plotis: 1.900 mm 3. Vidinis matmuo Aukštis: 2.000 mm 4. Pagrindas: 1 komplektas plieninių profilių 5. Sienos: 1 komplektas iš abiejų pusių cinkuoti 1 mm lakštai, išorė RAL spalva 6. Sienų ir lubų izoliacija: 1 komplektas akmens vatos 150 mm, 75 kg/m² 7. Grindys: krosnyje 2 įvažiavimo bėgiai vežimėliams 8. Temperatūra: 220°C 9. Ventiliatoriai: 1 vnt. 7.500 m³/val. 10. Elektros varikliai: 1 vnt. 3 kW, 1450 aps./min., 3 fazės, 50 Hz 11. Šiluminė galia: 58 kW 12. Vienpusės varstomos durys: 2 vnt., izoliuotos 150 mm akmens vata 75 kg/m² Šildymas: netiesioginis per termobloką 13. Termoblokas: 1 komplektas, nerūdijantis plienas INOX AISI 316, elektrinis šildymas, karščiui atsparūs ventiliatoriai ir guoliai, termobloke yra apsauga nuo perkaitimo 14. Krosnis: 1 vnt., šildymas elektra 15. Ištraukimas: 1 vnt., įrengta ištraukimo vamzdžio sistema, rankinis sklendės valdymas

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, temperatūra: 220 °C, izoliacinė medžiaga: Mineralwolle 75 kg/m³, izoliacijos storis: 150 mm, Powder curing ovens in various sizes 1 Internal dimensions Length 1,500 - 6,500 [mm] Nodpsfhv Tljfx Acpjla 2 Internal dimensions Width 1,700 - 1,900 [mm] 3 Internal dimensions Height 2,000 [mm] 4 Substructure Steel profile 5 Walls Double-sided galvanized sheet metal 1mm, external RAL 6 Insulation Walls, ceiling rock wool 150mm 75kg/m² 7 Floor Oven equipped with 2 drive-in rails for rack trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 Fans 1 - 2 units 2,600 - 15,000 [m³/h] 10 Electric motors 1 - 2 units 1.1 - 6 [kW], 1450 [rpm], 3~ 50 [Hz] 11 Thermal output 14 - 99 [kW] 12 Wing or sliding doors Single or double-sided 2 - 4 units Insulated with rock wool 150mm 75kg/m² Heating Indirect via thermoblock 13 Thermoblock Stainless steel INOX AISI 316, heating electric or gas, with heat-resistant fans and heat-resistant bearings, thermoblock equipped with overheat protection

Būklė: naujas, Gamybos metai: 2025, Powder Coating System for Large Parts All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Cabin for chemical pre-treatment (3 zones) with spray ring - Walk-in coating booth - Powder coating gun - Powder curing oven - Manual conveyor system - Electrical control system Example (all sizes can be customized): Space requirement: 30 x 15 meters Part size: L = 6,200 mm, W = 2,300 mm, H = 2,000 mm Walk-in cleaning cabin incl. automatic spray ring 1. Dimensions of the cabin Length: 9,000 mm Width: 4,500 mm Height: 3,400 mm 2. Dimensions of the tanks Length: 1,200 mm Width: 850 mm Height: 1,000 mm 3. Overall cabin dimensions including tanks Length: 9,140 mm Width incl. tanks: 5,580 mm Height: 4,200 mm Walk-in coating booth, manual coating 1. Cabin dimensions Length: 9,000 mm Width: 4,500 mm Height: 3,400 mm Njdpebhh Awsfx Acpola 2. Cabin dimensions incl. extraction Length: 10,125 mm Width: 4,500 mm Height: 3,400 mm Powder curing oven 1. Internal length: 6,500 mm 2. Internal width: 2,500 mm 3. Internal height: 2,950 mm 4. External length incl. heating unit: 7,600 mm 5. External width incl. heating unit: 2,800 mm 6. External height incl. heating unit: 3,100 mm Manual Conveyor System The conveyor system consists of: 1. Support structure made of steel elements, 120x120 mm / IPE 160 2. Trolley units - No. 9862 GL, 4 units 3. Pneumatic accessories for locking/unlocking during transfer 4. Rail system - No. 9060 – 234 meters 5. Trolley units - No. 9862 GLHT, 24 units 6. Connecting elements – No. 9061M, 34 units 7. Mounting clamps – No. 9067/180, 234 units 8. Stoppers – No. 9169, 21 units 9. Movable locking device – No. 9601 VM, 6 units 10. Fixed locking device – No. 9601 VF, 17 units Electrical Control System The electrical control unit is divided into electrical and automatic control. It enables centralized control of all above-mentioned units and consists of: - PLC - 5" color touch screen (easy view) - Modem - Thermal-magnetic circuit breaker (Telemechanique, Siemens, ABB) - Cables, brackets, pipes, etc.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 88 kW (119,65 AG), temperatūra: 220 °C, šildymo galia: 30 kW (40,79 AG), ruošinio aukštis (maks.): 1 500 mm, ruošinio ilgis (maks.): 500 mm, izoliacinė medžiaga: Steinwolle, izoliacijos storis: 150 mm, ruošinio plotis (maks.): 500 mm, Scope of supply: 1. Chemical pre-treatment by spraying (in cycle operation) 2. Dryer 3. Powder coating system 4. Powder curing oven 5. Conveying technology, semi-automatic 6. Electrical control system Hall / Installation Area Maximum system footprint: 12,000 x 6,500 mm Nljdpeulwg Njfx Acpoa Floor type: Industrial floor Workpiece dimensions Maximum part dimensions: L = 500 mm, H = 1,500 mm, W = 500 mm Parts spectrum: Steel Conveying technology P&F – Power & Free chain conveyor in cycle operation, semi-automatic Pre-treatment Chemical Energy supply Electricity: On-site power supply (max. 88 kW) Gas: On-site supply Compressed air: On-site supply Water: On-site supply Calculation System type: Cycle system Conveying speed: 3.2 meters / min Cycle length per step: L = 1,600 mm Time per conveying step (Tm): 1.6 meters / 3.2 meters/min = 0.5 minutes Dwell time per cycle (Ts): 8.5–12 minutes Total cycle time (Tt): Tm + Ts = 9–12.5 min Electrical power: Total capacity 88 kW Minimum average consumption: 60 kWh Maximum average consumption: 70 kWh

Būklė: naujas, Gamybos metai: 2025, Starter Packages for Powder Coating Nlsdpfx Acsbqk Nbspja Starter kits or individually designed packages to begin a self-employed business in surface technology, e.g., for coating wheels: This listing includes two sample solutions for entering powder coating or expanding existing businesses. Our focus is on customized consultation tailored to the client’s budget and requirements. Modifications and special requests are a standard part of our service. We emphasize proven, robust, and low-maintenance technology. Set 1: • Powder Curing Oven 2,000 x 1,900 x 2,000 mm (internal dimensions) – 150mm thick wall insulation with mineral wool for energy-efficient and cost-effective operation – 36kW thermal output for rapid heating times – Oil, gas, or electric heating options – 6,000 m³/h recirculated air (2.2 kW) for efficient heat transfer to workpieces – Up to 220°C • Powder Coating Booth (open spray booth) – Booth dimensions: • Width: 2,100 mm • Depth: 2,000 mm • Height: 2,200 mm – Fan: 6,000 m³/h electric motor 3.0 kW for a clean working environment – Filters ø 325x600 mm, 4 pcs; cartridge filter type with interval-controlled self-cleaning – Post-filtration via bag filter • Wagner Powder Coating System, Manual “Sprint 2 B” – Latest model from premium manufacturer Wagner for optimal coating results (other brands available on request) – Corona manual spray gun – PEM-C4 Ergo – EPG-Sprint controller – Feed system with fluidizing crown ST 550/10 – Powder injector PI-F1 – Equipment cart with vibrating table Set 2: • Powder Curing Oven 1,500 x 1,200 x 1,750 mm (internal dimensions) – 150mm thick wall insulation with mineral wool for energy-efficient and cost-effective operation – 14kW thermal output for rapid heating times – Electric heating – 2,600 m³/h recirculated air (1.1 kW) for efficient heat transfer to workpieces – Up to 220°C • Powder Coating Booth (open spray booth) – Booth dimensions: • Width: 1,200 mm • Depth: 1,100 mm • Height: 2,380 mm – Fan: 2,500 m³/h electric motor 1.1 kW for a clean working environment – Filters ø 325x600 mm, 2 pcs; cartridge filter type with interval-controlled self-cleaning – Post-filtration via bag filter • Wagner Powder Coating System, Manual “Sprint 2 B” – Latest model from premium manufacturer Wagner for optimal coating results (other brands available on request) – Corona manual spray gun – PEM-C4 Ergo – EPG-Sprint controller – Feed system with fluidizing crown ST 550/10 – Powder injector PI-F1 – Equipment cart with vibrating table