Jointer pirkti naudotą (291)

Sąlyga: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 250 mm, obliavimo aukštis: 160 mm, ašies skersmuo: 50 mm, obliavimo plotis: 250 mm, darbinio aukščio: 160 mm, bendras svoris: 10 000 kg, padavimo variklio galia: 30 000 W, veleno greitis (maks.): 6 000 aps./min, aukščio reguliavimo tipas: mechaninis, obliaus veleno skersmuo: 50 mm, įvesties srovės tipas: trifazis, stalo ilgis: 1 000 mm, ašies skaičius: 9, įėjimo dažnis: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, Nkodpfeqvml Rex Af Iot Working height: 140 mm, Spindle diameter: 50 mm, Feed: 30 kW / 6 - 65 m/min, Spindle configuration: 1-Bottom (11 kW) – with hydraulic clamping 2-Right (7.5 kW) 3-Left (11 kW) 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) – with hydraulic clamping 7-Top (15 kW) – with hydraulic clamping and straight jointer 8-Bottom (11 kW) – with hydraulic clamping and straight jointer 9-Bottom (11 kW) – with hydraulic clamping and straight jointer 8 powered rollers in the table

Sąlyga: geras (naudotas), Leadermac Speedmac 923 Didžiausias plotis: 230 mm Didžiausias storis: 160 mm 9 velenai, 6 000 aps./min. 4 šoniniai pjovimo mazgai !!! Nkjdpfx Ajxcft Sjf Iet Apatinis velenas 11 kW su išoriniu guoliu Dešinys 11 kW Kairys 11 kW Dešinys 11 kW Kairys 11 kW Viršutinis 11 kW su išoriniu guoliu Apatinis 11 kW su išoriniu guoliu Viršutinis 22 kW su išoriniu guoliu Apatinis 22 kW su išoriniu guoliu Pagal poreikį galima pridėti tiesinimo įtaisus. Pridedamas didelis kiekis Hydro įrankių!!! Padavimo variklis 11 kW. Padavimo greitis 6–70 m/min (galima padidinti pagal poreikį). Automatinė tepimo sistema. Galima tiekti su kalibravimo staklių paduotuvu ir išspjovimu pagal poreikį. Pagal poreikį galime pasiūlyti ir įrankius.

Sąlyga: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Jointer table length: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min 1 WEINIG Planer and Moulder Unimat 23 E ----- 6 spindles (2 of which are right-hand), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle, bottom, 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 125 - 180 mm Rabbetting unit incl. tooling Hardened table insert in front of 1st bottom spindle Nedjxz Hh Uepfx Af Ijkt 2nd spindle, right, 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. spring-loaded side roller pressure 4th spindle, right, 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle, top, 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool swing diameter and swivelling away from tool, spring-loaded 6th spindle, bottom, 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 112 - 250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles - General ----- All profiling spindles with high concentricity. Lubrication points for axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed steplessly adjustable 5–24 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled high/low Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Feed roller adjustment relative to left spindle, axial 35 mm Machine electrics ----- Operating voltage: 440 V (voltage range 380 - 420 Volt), 50 Hz Machine base, tables, and fences ----- Jointer table 2.0 m long (incl. straight edge) Manual Waxilit pump for table de-resining One powered rubber roller (spring-loaded in outfeed table) Two powered rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital indicator Ejection after top spindle with mechanical digital indicator ATS/system, automatic 2-axis positioning for spindles no. 3 and 5 Min. working height: 12 mm Electric height adjustment for top spindles and feed Centralized lubrication points located at machine front Electronic digital displays at spindle 3 and 5 (axial), spindle 6 (radial), and spindle 4 (axial and radial) Safety and sound insulation ----- Full safety enclosure Easily high...

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2003, Funkcionalumas: nepatikrintas, Prisijungimo galia 480V 42kW 108A, ištraukimo jungtis 5x120 + 2x150 mm, 1x ištisinio obliavimo agregatas, 2x vertikaliųjų velenų agregatai, 1x storinimo agregatas, 1x universalus viršutinis agregatas, 1x universalus apatinis agregatas, veleno skersmuo 40 mm, tepalo siurblys, pneumatiniu būdu valdomi spaudimo volai jungtis 6 bar, elektrinis tilto reguliavimas, centrinis tepimas, stepless tiektuvas per dažnio keitiklį, bendras ilgis 4200 mm, gylis 2000 mm, aukštis 1700 mm – grąžinta iš kliento Njdpfxsx E T Dme Af Iokt

Sąlyga: naudotas, Gamybos metai: 2022, Working width: 410 mm Cutter block: Tersa Number of knives: 4 Surface planer table length: 2000 mm Planer fence angle adjustable: yes, 45° to 90° Maximum thicknesser pass height: 250 mm Thickness table height adjustment: electric Planing thickness display: mechanical digital display Feed speed: 6 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 4.5 kW Nodpegqwxuefx Af Iokt Motor brake: yes, automatic Extraction port: 120 mm Machine length: 2000 mm Machine width: 882 mm Weight: 615 kg

Sąlyga: naujas, Gamybos metai: 2025, Working width: 410 mm Planer cutterhead: Tersa Number of knives: 4 Planer table length: 2000 mm Planer fence, adjustable angle: Yes, 45° to 90° Maximum thicknessing height: 250 mm Thicknessing table height adjustment: Electric Planing thickness display: Digital display Feed speed: 6/12 m/min Infeed roller: Steel Outfeed roller: Steel Table rollers: No Motor power: 4.5 kW Motor brake: Yes, automatic Extraction connection: 120 mm Machine length: 2000 mm Machine width: 882 mm Nedpfxjl D Rwte Af Iskt Weight: 615 kg

Sąlyga: naujas, Gamybos metai: 2025, Darbo plotis: 410 mm Obliavimo velenas: spiralinė ašis Peilių skaičius: 66 Obliavimo stalo ilgis: 2020 mm Kampo reguliavimas: taip, 45°–90° Maks. storio obliavimo praėjimas: 230 mm Storio stalo aukščio reguliavimas: elektrinis Obliavimo storio rodmuo: skaitmeninis ekranas Padavimo greitis: 5,5 / 10 m/min Įtraukimo volas: plieninis Ištraukimo volas: plieninis Nodpfx Asxzfwhof Ijkt Stalviršio volai: ne Variklio galia: 5,3 kW Variklio stabdis: taip, automatinis Nusiurbimo jungtis: 100 mm Staklių ilgis: 2020 mm Staklių plotis: 882 mm Svoris: 480 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA-PUR glue pot with drain function optional), HF end trimming station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece tracking. Suitable for ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4–3.0mm and workpiece heights from 8–50mm. Feed speed: 7.0 m/min • 2 free spaces for finishing units • 7.0" color touch screen • Automatic edge feeder for roll material via rotatable roll table D=600 mm • Infeed alignment (400mm) with support • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointer cutters ensure clean and tear-free jointing of the workpieces before edge gluing • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue reservoir from below (excess glue is automatically returned to the glue pot), fine adjustable glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue from burning when the machine is unused but still switched on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color change • Pre-cutting shear for roll material up to 3 mm edge thickness • Pressure zone consisting of one driven pressure roller synchronized with the glue roller and one adjustable pressure roller with spring tension, for optimal bonding of the edge material to the workpiece, adjustment of the pressure zone with digital counter • High-frequency end trimming saw equipped with 0.21 kW HF motor, 12,000 rpm, 2 saw blades and high-precision linear guides for clean and precise cutting, equipment includes extraction hood Nkedpfx Ajd R U Acsf Ist • High-frequency combined milling station, two powerful 0.27 kW HF motors with HM-WPL special cutters, suitable for radius and bevel milling, horizontal and vertical sensing of the workpiece, unit adjustment equipped with digital counters for setting different edge types, 2 chip extraction hoods with central extractor port 2 x Ø 100 mm, height adjustment of upper unit with top pressure • Swiveling control panel with 7.0" color touchscreen controls glue temperature settings, automatic reduction of temperature when machine is not in use, on/off control of units and error diagnostics • LED lighting in the cabin • Riepe spray systems for anti-adhesive or cleaning agents available as options Optional finishing units (2 free spaces): • Radius scraper unit: Light pulling cut removes any radius milling marks to ensure a perfect finish. Fine adjustment using digital counter. • Flat scraper unit: Light pulling cut cleans the workpiece surface of any glue residues at the adhesive joint • Buffing unit: 2 motors 0.05 kW, 1,500 rpm for super finish on ABS and PVC edge materials

Sąlyga: beveik kaip naujas (naudotas), Four-Sided Planer Weinig Hydromat H22N - German-made - Technical documentation included - Year of manufacture: 1992 - Two feed rollers in the table before the first cutterhead - Suitable for wet wood TECHNICAL PARAMETERS: - Planing width: 220 mm - Planing height: 140 mm - Spindle diameter: 50 mm 1st bottom cutterhead: 7.5 kW 2nd right cutterhead: 7.5 kW 3rd left cutterhead: 11 kW 4th top cutterhead: 7.5 kW 5th bottom cutterhead: 11 kW Hydraulic feed Feed pump motor power: 15 kW Infinitely variable feed speed up to 60 m/min Feed via cardan shafts Electric height adjustment Pneumatic hold-downs Five infeed rollers in the table Eight upper steel feed rollers One upper rubber feed roller Supports on horizontal spindles Nedspvi Skjpfx Af Iokt Jointers on bottom spindles Transport dimensions: 500 x 200 x 160 cm Weight: 4 t

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, obliavimo aukštis: 190 mm, ašies skersmuo: 50 mm, obliavimo plotis: 250 mm, bendras svoris: 10 000 kg, Four-sided planer Weinig Hydromat H25N with 100 m/min feeder - German manufacture - Hydraulic feed up to 100 m/min - Suitable for wet wood - Infeed table TECHNICAL SPECIFICATIONS: Planing width: 250 mm Planing height: 190 mm Spindle diameter: 50 mm Electric height adjustment 1st bottom spindle: 15 kW 2nd right spindle: 7.5 kW 3rd left spindle: 15 kW 4th right spindle: 7.5 kW 5th top spindle: 7.5 kW 6th top spindle: 15 kW 7th bottom spindle: 7.5 kW 8th universal spindle 1800: 7.5 kW Infinitely variable feed speed up to 100 m/min Feed pump motor power: 22 kW Nine feed rollers on the table, of which three are before the first cutterhead Seven top steel feed rollers Four top rubber feed rollers Pneumatic pressure system Jointer on spindles 1-6-7 Automatic table lubrication Infeed table: 3000 mm Infinitely variable speed adjustment up to 100 m/min Nodpfxon Slk Ue Af Ijkt Two top pneumatic rollers Six bottom feed rollers Minimum workpiece length: 650 mm Transport dimensions: 11000x2400x2000 mm Weight: 10 t

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 310 mm, obliavimo plotis: 310 mm, Weinig aukščiausios klasės modelis: Weinig Powermat 3000 Speciali 6 veržlių keturių pusių obliavimo staklės Nodpoxyxhwjfx Af Iskt Visi varikliai su dažnio reguliavimu, 4000–12 000 aps./min. Ypatingai platus darbinis plotis – 310 mm Darbinis aukštis 160 mm, pasirinktinai – 200 mm Visos galvutės su Powerlock Didelio greičio padavimas – 100 m/min Su profiliu ir tiesiu jointeriu Ašys valdomos CNC tiek ašine, tiek radialine kryptimis Trumpas įvado stalas – 1,1 m WMC Moulder Master Pilna komplektacija! Kaip nauja, niekada nenaudota gamyboje!

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, For sale is a used Format4 surface planer-thicknesser with a planing length of 2,250 mm. The machine has been inspected by our specialist staff and is in as-new condition. Technical specifications: - Planing/thicknessing width: 510 mm - DUAL folding infeed and outfeed tables Nksdpfx Aswnd T Ref Ijt - Silent Power cutter block - Thicknessing height: 4–250 mm - Variable feed speed: 4–16 m/min - 10 HP (7.35 kW) motor - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: surface planer, thickness planer, planer, jointer, thicknessing Reference: R-A0117

Sąlyga: beveik kaip naujas (parodų įrenginys), Description: Vacomat 140/160 XPe - The mobile dust extractor Vacomat 140/160 XPe is our smallest model and is perfectly suited for extracting dust from individual machines. Air volumes of up to 1,593 m³/h can be conveyed with this negative-pressure extraction system, for example for dust removal from panel saws, jointers, or thickness planers. - In the standard version, extraction is manually started at the push of a button. Upon request, an automatic start of the fan can be installed, which activates when the connected processing machine is switched on. This ensures that extraction is not forgotten or run unnecessarily in idle. - The dust/chip mixture is discharged into a dust-tight chip collection container (240 l) lined with a plastic bag. A vacuum duct holds the plastic liner securely in the collection bin. Inspection windows make it easy to monitor the fill level. - The mobile dust extractor Vacomat 140/160 XPe independently monitors its extraction performance via a pressure sensor, ensuring maximum operational safety. Filter Cleaning - In the Vacomat 140/160 XPe, an integrated control cabinet triggers the electro-mechanical cleaning of the filter hoses via a vibration motor. Activation is managed by the status of the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaker automatically starts. No compressed air connection or compressor is required for this filter regeneration mechanism, which results in a significant reduction in noise during cleaning. - Optional and highly recommended for very high levels of fine dust, an efficient pulse-jet cleaning system (XPe-D) is available (NOTE: machine height increases by +100 mm and length by +280 mm). Pulse-jet filter cleaning using a compressed air tank occurs offline, after extraction operation. Njdpfx Afjvwflnj Ijkt SCHUKOCONE FILTER - The mobile extractor Vacomat 140/160 XPe is delivered as standard with patented SchukoCone® filter hoses. - The SchukoCone® filter is a successful combination of an externally filtered hose with an internally filtered cone. This innovative filter design provides approx. 60% more filter area while requiring less space. - SchukoCone® filter hoses truly show their advantages especially for fine dust, where a large filter area and low surface load are critical. - Lower filter surface load leads to longer filter service life. With lower filter resistance, less fan power—and thus less energy—is required. ASSEMBLY & SCOPE OF DELIVERY - The mobile dust extractors of the type Vacomat 140/160 XPe are delivered pre-assembled and ready to plug in (16 A three-phase, with 6.0 m cable) on a disposable pallet (included). A chip collection bag (size V) is also included in the delivery. - The Vacomat 140/160 XPe must be electrically connected to the machine to be extracted so that the automatic regeneration of the filter hoses is triggered after switching off the processing machine. An electrical contractor can assist with this. The supplied control cabinet with integrated phase inverter is prepared for connection to a potential-free contact and three current transformer coils (coils not included). - With a flexible hose or fixed pipe...

Sąlyga: labai geros būklės (naudotas), TECHNICAL PARAMETERS: JOINTER: - Shaft width: 400 mm - 3-knife cutterblock - Adjustable fence (angle adjustable) - Table length: 2200 mm - Both infeed and outfeed tables are adjustable THICKNESSER: - Maximum thickness of workpiece: 200 mm - Thicknesser cutterblock guard *from above: - Anti-kickback fingers - Serrated, driven, spiral infeed roller - Pressure elements - Planer cutterblock - Pressure bar - Driven outfeed roller (smooth) - Main motor: 4 kW MACHINE DIMENSIONS: - Length: 2200 mm - Width: 1300 mm - Height: 1200 mm - Weight: 950 kg Where can you view our machines? Nkodswhgizjpfx Af Ist JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE The machine can be tested on site. Financing available via leasing or instalments. WE CAN ARRANGE TRANSPORT

Sąlyga: naudotas, Gamybos metai: 1994, Naudota mašina Pagaminimo metai: 1994 Komplektacija ir techniniai duomenys: - Obliavimo plotis: 410 mm - Minimalus storio obliavimo aukštis: 3 mm - Maksimalus storio obliavimo aukštis: 240 mm - Drožlių nuėmimas: maks. 7 mm - Peilių skaičius: 3 vnt. Tersa peiliai - Storio stalo reguliavimas: mechaninis - Storio matavimo indikatorius: mechaninis - Variklis: 4 kW - Padvės greitis: 6/12 m/min Njdpjxwz Izsfx Af Iskt - Įvyniojimo volelis: plieninis - Išvyniojimo volelis: plieninis - Siurbimo jungties diametras: 120 mm Prieinamumas: apie 2026 m. balandžio vidurį Sandėliavimo vieta: Hesenas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 230 mm, ašies skersmuo: 40 mm, darbinio aukščio: 120 mm, ašies skaičius: 6, Planer and moulder four-sided moulding machine Manufacturer: Weinig Model: Hydromat 23C Year of manufacture: 2005 Working width: 230 mm Working height: 120 mm Njdpfxsx E Ak Aj Af Iekt 6 spindles Spindle arrangement: bottom / right / left / top / top / bottom Each spindle motor: 7.5 kW Automatic table lubrication Control: Memory System Automatic Spindle diameter: 40 mm Spindles with double-sided bearings The last two heads are equipped with jointers

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Leadermac Thundermac 923T Velenai: 9 x 50 mm x 6000 aps./min. Apatinis (22 kW) - Dešinys (15 kW) - Kairys (15 kW) - Dešinys (15 kW) - Kairys (15 kW) - Viršutinis (22 kW) - Apatinis (22 kW), Viršutinis (22 kW) - Apatinis (22 kW). Darbinis plotis: 250 mm, aukštis: 160 mm. Nkodpfx Ajxgq S Ijf Iot Maks. padavimo greitis: 100 m/min (Galima padidinti iki 150 m/min) Tiesūs obliavimo agregatai. Profilio obliavimo agregatai. Jungtis: 380 V / / 50 Hz, 400 A. Pridedama pilna dokumentacija.

Sąlyga: geras (naudotas), Weinig Hydromat H23, 8 Spindeln 50 mm Spindeln, 6.000 U/min Unten: 7,5 kW Hobelaggregat, einsatzbereit Rechts: 7,5 kW Geradhobelaggregat, einsatzbereit Links: 15 kW Gerad- und Profilhobelaggregat, einsatzbereit Rechts: 11 kW Profilhobelaggregat, einsatzbereit Nkodexgq Rwjpfx Af Iot Oben: 15 kW Hobelaggregat, einsatzbereit Unten: 18,5 kW Hobelaggregat, einsatzbereit Oben: 11 kW Gerad- und Profilhobelaggregat + Lagerbock Unten: 7,5 kW Gerad- und Profilhobelaggregat + Lagerbock 7,5 kW Vorschubmotor Automatisches Schmiersystem Vollständige, schallgedämmte Industriestahlhaube Zufuhr- und Abförderer für den Hobel auf Wunsch lieferbar. Werkzeugausstattung kann auf Anfrage angeboten werden.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Weinig Hydromat 23C su 6 velenais. Atskiras elektros valdymo pultas. Automatinė lovų tepimo sistema. Didžiausi matmenys: 140mm x 230mm Nr. 1: 11kW - apačia, 6000aps./min, išorinis guolis – paruošta tiesia obliavimo galvutė Nr. 2: 11kW - dešinė, 6000aps./min – paruošta tiesi ir profilio obliavimo galvutė Nr. 3: 11kW - kairė, 6000aps./min – paruošta tiesi ir profilio obliavimo galvutė Nr. 4: 15kW - viršus, 6000aps./min, išorinis guolis – paruošta obliavimo galvutė Nr. 5: 11kW - viršus, 6000aps./min, išorinis guolis – tiesi obliavimo galvutė Nr. 6: 18,5kW - apačia, 6000aps./min, išorinis guolis – tiesi obliavimo galvutė 7,5kW padavimo variklis. 6–60 m/min (galima didinti greitį pagal poreikį). Velenai 50mm. Veleno pavara 0,55kW. Visi dokumentai pridedami. Galima tiekti su hidro įrankiais, jei reikia. Galimas padavimo/nuėmimo stalų komplektavimas pagal poreikį. Nksdpfx Aoxgq Rdof Ijt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Weinig H1000 obliavimo staklės Weinig Hydromat 1000 su 5 velenais. (2012 metų) Atskiras elektros skydas Atskiras nuotolinio valdymo pultas Automatinė staklių stalo tepimo sistema Atminties sistema Pilnas garso izoliacijos korpusas Nr. 1 – 7,5 kW – apačioje, 6000 aps./min + išorinis guolis + tiesinis obliavimo įtaisas Nr. 2 – 7,5 kW – dešinėje, 6000 aps./min + profiliavimo įtaisas Nr. 3 – 7,5 kW – kairėje, 6000 aps./min + profiliavimo įtaisas Nr. 4 – 7,5 kW – viršuje, 6000 aps./min + išorinis guolis + tiesinis obliavimo įtaisas Nr. 5 – 7,5 kW – apačioje, 6000 aps./min + išorinis guolis + tiesinis obliavimo įtaisas 50 mm velenai Sijos variklis 0,55 kW Pridedama visa dokumentacija. Įtraukta ir drožlių nutraukimo šaka. Njdpfx Aoxgq Nyof Iekt Galima komplektuoti su Weinig mechanizacija, jei reikia (2012 metų).

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Weinig H1000 obliavimo staklės su E3 padavimo ir A3 išvedimo agregatais Weinig Hydromat 1000, 5 velenų (2012 m.) Atskiras elektros valdymo skydas Atskiras nuotolinio valdymo skydelis Automatinė stalo plokštumų tepimo sistema Atminties sistema Pilnas garso izoliacijos gaubtas Weinig E3 obliavimo padavimas su pakuotės žirkline kėlimo platforma (3000 kg) Weinig A3 išvedimas su išmetama platforma, pakuotės žirkline kėlimo platforma (3000 kg) ir pakuotės išvedimo grandinine konvejeriu Nr. 1: 7.5 kW – apatinis, 6000 aps/min su išoriniu guoliu ir tiesiniu drožtuvu Nr. 2: 7.5 kW – dešinys, 6000 aps/min su profiliu drožtuvu Nr. 3: 7.5 kW – kairys, 6000 aps/min su profiliu drožtuvu Nr. 4: 7.5 kW – viršutinis, 6000 aps/min su išoriniu guoliu ir tiesiniu drožtuvu Nedpfx Aoxdx Dmjf Iekt Nr. 5: 7.5 kW – apatinis, 6000 aps/min su išoriniu guoliu ir tiesiniu drožtuvu 50 mm velenai Pritraukimo sija: 0.55 kW Pilna dokumentacija pridedama Ištraukimo kolektorius pridedamas.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 230 mm, obliavimo aukštis: 120 mm, ašies skersmuo: 50 mm, obliavimo plotis: 230 mm, darbinio aukščio: 120 mm, padavimo variklio galia: 37 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 3 000 aps./min, aukščio reguliavimo tipas: elektrinis, obliaus veleno skersmuo: 50 mm, įvesties srovės tipas: trifazis, ašies skaičius: 10, galia: 574 kW (780,42 AG), įėjimo dažnis: 50 Hz, Įranga: kabina, sūkių greitis be galo kintamas, variklio stabdis, Weinig Powermat 2500 10 spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12-120 m/min, Spindle arrangement: 1- Bottom (22 kW) - with hydro clamp and fully automatic straight jointing 2- Right (11 kW) Nsdpfx Ajxz Thbsf Ijkt 3- Left (11 kW) 4- Top (37 kW) - with fully automatic straight jointing 5- Bottom (18.5 kW) with hydro clamp and fully automatic straight jointing 6- Top (18.5 kW) - with hydro clamp and fully automatic straight jointing 7- Top (53 kW) - with hydro clamp, speed 3000-6000 rpm 8- Bottom (53 kW) - with hydro clamp, speed 3000-6000 rpm 9- Top (53 kW) - with hydro clamp, speed 3000-6000 rpm 10- Bottom (53 kW) - with hydro clamp, speed 3000-6000 rpm Short infeed table, 1.3 meters (4 rollers) with 2 powered rollers above the table, and 2 powered rollers in the table. Both table rollers are liftable. Table height adjustment via electronic digital display. Incl. 2 heavy-duty side pressure rollers, diameter 140mm, pneumatic. Support feet height: 320 mm for table height of 1190 mm Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table plates). Special coating to protect table plates, fences, and guide rails against excessive wear. Recommended for processing abrasive materials (e.g. tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm. In the area of the right and left spindle.

Sąlyga: naujas, Gamybos metai: 2024, I am selling a new combined surface and thickness planer VITAL FS32N. Brand new machine, year of manufacture 2024, with warranty. Maximum working width: 320 mm 3-knife cutter block, Ø320 x 100 mm Main spindle + feed motor: 3.0 kW Total weight: 360 kg Surface Planer: Maximum planing depth: 5 mm Nkjdpfeq Dzkmjx Af Ist Table size: 1500 x 320 mm (750 mm infeed + 750 mm outfeed) Fence dimensions: 1100 x 155 mm, adjustable from 0–45° Thickness Planer: Maximum planing depth: 4 mm Maximum working height: 4–230 mm Feed speed: 8 m/min 1+1 pressure rollers with anti-kickback protection Manual thickness adjustment Extraction port diameter: 120 mm European product, manufactured in the EU, with CE certificate and operating manual. Brand new machine with 12 months warranty. Machine in stock in Kežmarok, Slovakia, test run possible. Option to purchase an additional slot mortising machine with adjustable table for 700 Euro. In stock.

Sąlyga: naujas, Gamybos metai: 2024, I am selling a new combined surface planer and thicknesser VITAL FS32NS with spiral cutterhead. This is a new machine built in 2024, covered by warranty. Maximum working width: 320 mm Spiral cutterhead with 3 knife rows, fi. 320x100 mm Main spindle and feed motor: 3.0 kW Total weight: 360 kg Surface Planer: Maximum planing depth: 5 mm (design) Table size: 1500 x 320 mm / 750 mm infeed + 750 mm outfeed Fence size: 1100 x 155 mm, adjustable from 0–45° Nkedpfxeq Dzlno Af Iet Thickness Planer: Maximum planing depth: 4 mm (design) Maximum working height: 4–230 mm Feed speed: 8 m/min 1+1 pressure rollers with anti-kickback protection Thickness adjustment: manual Extraction hood diameter: 120 mm European product, manufactured in the EU, with CE certificate and operating manual. New machine with 12 months warranty. The machine is in stock in Kežmarok, Slovakia, and available for testing. Optional: Additional slot mortising machine with adjustable table available for €700. In stock.

Sąlyga: naujas, Gamybos metai: 2024, For sale: New combined surface/thickness planer with spiral cutter block and mortising attachment, VITAL FS41NSD. Brand new machine, year of manufacture 2024, with warranty. - Maximum working width: 410 mm - Spiral cutter block with 3 knife rows, Ø410 x 100 mm - Main spindle and feed motor: 4.0 kW - Total weight: 510 kg - Includes mortising unit with adjustable table Surface planer: - Max. planing depth: 5 mm - Table size: 1800 x 410 mm (900 mm infeed + 900 mm outfeed) - Fence dimensions: 1100 x 155 mm, adjustable from 0–45° Thickness planer: - Max. planing depth: 4 mm - Max. working height: 4–230 mm - Feed speed: 8 m/min - 1+1 pressure rollers with anti-kickback protection Nsdpfx Afoq Dzmto Ijkt - 2 feed rollers under the table for improved feeding of wet or heavy workpieces - Manual thickness adjustment - Extraction hood diameter: 120 mm European product, manufactured in the EU, CE-certified, with user manual. New machine with 12-month warranty. Machine in stock in Kežmarok, Slovakia. Test run possible.