Ism 4 pirkti naudotą (60 269)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing Giedpfx Ahed Tbbds Aot - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: Gedpofdkb Tefx Ah Aeit 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) Godpfed Tqalex Ah Ajit - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time Gijdpfxsfdkb Uo Ah Ajt - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Giedpfxjguk A Hs Ah Aot Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Gsdpfx Asfdkbheh Aeit Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone Gjdjguk Dkepfx Ah Aeit - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg Gijdjguk Dvopfx Ah Aet - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 180 mm, Siūlome labai gerą Format-4 300-24-006 agregatą. Jis buvo užsakytas ir labai retai naudojamas, pastaruosius kelerius metus stovėjo lentynoje. Pridedame mūsų pagamintą medinę dėžę su kilimine danga. Modelis: Format4 300-24-006 Jungtis: HSK-63F Pavaros santykis: 1:1 Maks. įėjimo greitis: 15 000 aps./min. Maks. sukimo momentas: 20 Nm Kampo reguliavimas: Rankinis pasukimas nuo 0° iki 100° Kilus klausimų, susisiekite. Giedoyrpk Uspfx Ah Aet Šiuo metu Felder svetainėje kaina – £5346 - €6153

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 42 000 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 3 315 kg, bendras ilgis: 3 200 mm, bendras plotis: 1 630 mm, bendras aukštis: 1 960 mm, variklių gamintojas: Siemens, galia: 236 kW (320,87 AG), tūrio srautas: 3 013 m³/val, darbinis slėgis: 4 juosta, triukšmo lygis: 77 dB, aušinimo tipas: vanduo, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, 1 unit low pressure screw compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3630 rpm Speed control: with integrated frequency converter Cooling: water cooling with FUNKE stainless steel shell-and-tube heat exchanger 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3200 mm Width: 1630 mm Height: 1960 mm Weight: 3315 kg Also available: Cyclone afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain: Bekomat Shell-and-tube heat exchanger Manufacturer: Funke Model: A100 805-6-1Way Material: stainless steel 2x rubber compensator 1x intermediate flange valve DN 150 with AUMA actuator SG 05.1 F07 1x cooling water control valve Samson 3274 DN 50 PN 16 1x steel pipeline DN 150 with 2x 90° bends Gedpfx Ahsywr Tko Aoit

Būklė: labai geros būklės (naudotas), • Gamintojas: ABUS KG – Vokietija • Tipas: K-300 1-4 • Variklio galia: 3,8 kW • Maitinimas: 400 V / 50 Hz • Įrengtas elektromagnetinis stabdis – stabdymo momentas 90 Nm • Dantytas velenas – skersmuo apie 34 mm • Tvirtinimas: kvadratinis flanšas • Tvirta pramoninė konstrukcija, skirta naudoti ABUS tiltinėse kranose ir keltuvuose • Būklė: naudotas, veikiantis (tikros nuotraukos) Gijdoxbfutjpfx Ah Aet

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, keliamoji galia: 9 150 kg, keliamoji galia vienai sandėliavimo sekcijai: 3 050 kg, bendras ilgis: 22 800 mm, bendras aukštis: 3 500 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, lentynų eilučių skaičius: 4, rėmo aukštis: 3 500 mm, rėmo plotis: 1 100 mm, lentynos aukštis: 3 500 mm, lentyna ilgis: 22 800 mm, 4 dvigubos zonos padėklų stelažai (M35112711-3) po 5,7 m ilgio, 3,5 m aukščio, 1,1 m gylio, kiekvienas su 2 sekcijomis, po 2,7 m pločio, kiekviename po 3 traversų lygius, lentynos apkrova – 3000 kg. - 12 rėmų (RM3511 - RAL5019) Giodpoyz Iccsfx Ah Ast - 24 pado plokštės, tarpinės, tvirtinimo medžiagos - 48 grindų ankeriai (ZZBA1210) - 48 viengubų traversų (T2711 - RAL2008) - 4 apkrovos lentelės (BSMcP) Rėmai varžtiniai, nesurinkti. Transportavimas / pristatymas: - iki 20 darbo dienų po apmokėjimo - pristatymas į statybvietę/montavimo vietą - iškrovimą iš sunkvežimio atlieka pirkėjas su nuosava kėlimo įranga - pristatymas galimas visoje Vokietijos teritorijoje, išskyrus salas! Pristatymas į ES valstybes pagal individualų susitarimą.

Būklė: naujas, Gamybos metai: 2025, Tout inox Mélangeur Tumbler – livraison rapide d’une machine Fabrication neuve sur commande Cuve en acier inoxydable de haute qualité, inox 316 Vitesse de rotation variable de 0 à 24 tr/min Déchargement par basculement électrique Capacité de 50 kg à 90 kg selon le type de produit Giedpfx Asif Upfoh Ast 2 modèles disponibles

Būklė: geras (naudotas), Gamybos metai: 2005, bendras ilgis: 4 200 mm, bendras plotis: 2 500 mm, bendras aukštis: 1 800 mm, produkto aukštis (maks.): 4 mm, bendras svoris: 7 000 kg, Cutting capacity: 4 mm, cutting length: 3050 mm, throat depth: 350 mm, motor: 18.5 kW, motorized backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions: 420x250x180 cm, approx. 6,500 kg Gijdpfx Ahetp I S As Ajt

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 1 800 h, No. 3131 CNC Machining Center FORMAT-4 profit H10 22.43 Used, year of manufacture: 2017 Operating hours: approx. 1,800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, loading unit FORMAT-4 L-Motion, and extraction system FELDER RL 300 Technical Data – CNC Machining Center FORMAT-4 profit H10 22.43: - Matrix table system made of phenolic resin - Grid table with two stop rows - Automatic central lubrication - HARDWARE control computer - Mobile control console - Handheld terminal for remote axis control - Two vacuum pumps, rated output 2 x 250 m³/h - Tool changer with 10 tools - Tool changer on the left in the machine frame: 8 tool positions for HSK - Milling spindle 12 kW (S6) HSK F63, 24,000 rpm - Central extraction via combined connections (D = 250 mm) - Woodflash software German version (H20/H08/H10/H50) - Axis travel path H10 22.43: X = 5,230 mm / Y = 2,560 mm / Z = 280 mm - Working area: X = 4,300 mm / Y = 2,160 mm / Z = 105 mm - Axis positioning speed: X = 100 m/min / Y = 100 m/min / Z = 30 m/min Technical Data – Loading Unit FORMAT-4 L-Motion: - Year of manufacture: 2017 - 2-axis design with 4 storage positions for feeding a H10 with lift table - CNC loading - Gentle transport - Fully automatic panel handling - Workpiece sizes: Length 2,000–4,200 mm / Width 600–2,100 mm / Thickness from 8 mm / Panel weight 200 kg Gijdpjrrh T Aefx Ah Aot - Density: Chipboard 650 kg/m³ / Raw MDF 750 kg/m³ - Stack height 1,800 mm Technical Data – Extraction System FELDER RL 300: - Year of manufacture: 2023 - Rated volume flow 6,000 m³/h, H3 GS dust-tested, JET cleaning - Compressed air connection 3/4-inch - Connection pressure 7–12 bar at 40 NL/min - Operating pressure in device: 6 bar - Chip container capacity: 500 l - Extinguishing device with dry powder extinguisher 12 kg Sale on behalf of customer, ex location Leipzig, without dismantling, without transport or installation Subject to errors in description and price Dismantling and loading by us available as an option To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale in as-is condition Technical specifications, condition descriptions, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as inspected” Images and videos are sample representations and do not reflect the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex works

Būklė: naudotas, rida: 334 050 km, galia: 290 kW (394,29 AG), pirmoji registracija: 01/2017, kuro tipas: dyzelinas, sėdimų vietų skaičius: 47, pavaros tipas: mechaninis, emisijos klasė: Euro 6, spalva: balta, stabdžiai: retarderis, Gamybos metai: 2016, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), oro kondicionavimas, suodžių filtras, virtuvė transporto priemonėje, vonios kambarys,

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, bendras ilgis: 34 000 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, lentynų eilučių skaičius: 4, rėmo aukštis: 3 500 mm, padėklų vietos: 108 euro padėklai, rėmo plotis: 1 100 mm, lentynos aukštis: 3 500 mm, lentyna ilgis: 8 500 mm, atrama ilgis: 2 700 mm, 4 rows of pallet racks (4 x M35112711-2) Each 8.5 m long, 3.5 m high, 1.1 m deep Each with 3 bays, 2.7 m wide Each with 2 beam levels, bay load capacity 3,000 kg Gedpfxsv Ukz Aj Ah Asit - 16 frames (RM3511 - RAL5019) - 32 base plates, laying material, fastening material - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction site / assembly location - Unloading from the truck to be carried out by the buyer using own lifting equipment - Delivery throughout the entire territory of the Federal Republic of Germany (except islands!). - Deliveries to EU countries according to individual agreement.

Būklė: naujas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: EAN0729389556525, bendras ilgis: 71 000 mm, bendras aukštis: 4 000 mm, tarpas tarp stulpų: 2 700 mm, lentynos aukštis: 4 000 mm, lentynų eilučių skaičius: 7, keliamoji galia: 6 000 kg, rėmo aukštis: 4 000 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, Padėklų stelažų sistema Aukštis 4 m, kiekviename lauke po 2 skersinių lygius (vidinis plotis 2700 mm) Apimtis: - 32 rėmai, 4 m aukščio - 128 grindų ankeriai - 18 apsauginių kampų nuo atsitrenkimo - 100 skersinių po 2,7 m ilgio, 0,11 m aukščio - 150 grotelių lentynų 89/110, keliamoji galia 1000 kg - 7 keliam. galios lentelės Pristatymas laisvai statybvietėje Rėmai susukami, neparuošti prieš pristatymą Transportas / Pristatymas: - ne vėliau kaip per 20 darbo dienų nuo apmokėjimo Giodpfoyyny Esx Ah Aot - pristatymas laisvai statybvietėje/ sumontavimo vietoje - Iškrovimas iš sunkvežimio – pirkėjo prievolė, naudojant nuosavą keltuvą - Pristatymas visoje Vokietijoje, išskyrus salas! Pristatymas į ES šalis derinamas atskirai.

Būklė: labai geros būklės (naudotas), keliamoji galia: 4 000 kg, Įranga: kojinis nuotolinio valdymo pultas, Heinrichsglück 4 tonų keliamoji galia, PUIKI būklė 4000 kg keliamoji galia suvirinimo sukamasis stalas, pilnas komplektas Horizontali keliamoji galia – 4000 kg, pakrypus – 4000 kg Nuoseklus posvyrio ir greičio reguliavimas Labai tvirtos konstrukcijos Greitis reguliuojamas be pakopų nuo 0,05 iki 1,5 aps./min, skaitmeninis ekranas Sukamojo stalo diametras 1500 mm Aukštis horizontalioje padėtyje 1230 mm, pakrypus iki vidurio 1000 mm Ilgis 2,0 m x plotis 1,6 m Rankinis nuotolinio valdymo pultelis ir valdymas koja Gisdpfsyuph Eex Ah Aet

Būklė: naudotas, rida: 272 600 km, galia: 260 kW (353,50 AG), pirmoji registracija: 08/2015, kuro tipas: dyzelinas, sėdimų vietų skaičius: 41, pavaros tipas: mechaninis, emisijos klasė: Euro 6, spalva: balta, stabdžiai: retarderis, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), navigacijos sistema, oro kondicionavimas, virtuvė transporto priemonėje, vonios kambarys,

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 440 mm, greitas poslinkis X ašimi: 400 m/min, sukimosi greitis (min.): 2 500 aps./min, valdiklių gamintojas: HEIDENHAIN TNC 123, Mašina labai geros būklės. Iš karto paruošta darbui. Giedpsyxpraofx Ah Aot

Būklė: naudotas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, galia: 18 kW (24,47 AG), įėjimo įtampa: 400 V, įėjimo srovė: 40 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, Įranga: CE žymėjimas, dokumentacija / vadovas, Siūlome šį naudotą FORMAT-4 PROFIT H200R 13.33 pravažiavimo apdirbimo centrą, pagamintą 2022 m. Gsdpeyvtq Uefx Ah Ajit

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 400 mm, pjovimo plotis (maks.): 400 mm, bendras aukštis: 1 720 mm, bendras ilgis: 2 600 mm, bendras plotis: 2 400 mm, bendras svoris: 2 200 kg, stalo aukštis: 700 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 400 mm, padavimo ilgis X ašis: 600 mm, juostinio pjūklo ilgas: 5 700 mm, pjūklo juostos plotis: 41 mm, Fully hydraulic high-performance band saw in heavy-duty construction, featuring a horizontally parallel moving saw blade, designed for cutting profiles, pipes, and solid materials of all qualities, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide saw bands. Saw unit made from solid polymer concrete, delivering maximum running smoothness and blade service life. The saw unit is guided by two vertical square columns (double-column guide) with hardened and ground guiding rails. Mechanical saw blade tensioning with pre-tensioned carbide blade guides. Material clamping is accomplished via two horizontal frame clamping vices. Material feed is provided by a non-driven roller conveyor with twelve rollers, integrated into the machine, allowing easy transport of short remnants. Gijdpfx Ahjupvrxe Ast Year of manufacture: 2008 Cutting capacity round: 400 mm Cutting capacity square: 400 x 400 mm Automatic feed length: 600 mm Multiple material feed: 99,999 mm Cutting speed stepless: 20–130 m/min Total drive power: 7 kW Saw motor power: 4 kW Clamping pressure reduction: stepless adjustable Material support height: 700 mm Saw band dimensions: 5090 x 41 x 1.3 mm Shortest cut length in automatic operation: 6 mm Remnant length in automatic operation: 80 mm Voltage: 380V / 50 Hz Dimensions (LxWxH): 2600 x 2400 x 1720 mm Weight: 2,200 kg Coolant system Full enclosure CNC control Idle monitoring Side guide rollers Height measurement system Light barrier

Būklė: naudotas, rida: 686 625 km, galia: 340 kW (462,27 AG), pirmoji registracija: 02/2014, kuro tipas: dyzelinas, sėdimų vietų skaičius: 61, pavaros tipas: automatinis, emisijos klasė: Euro 5, spalva: kitas, stabdžiai: retarderis, Gamybos metai: 2014, Įranga: ABS, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priekabos jungtis, pritaikyta neįgaliesiems, virtuvė transporto priemonėje,