Ima Advantage 400 pirkti naudotą (137)

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Bwodpfxsidqphe Aahei Top pressure: belt-driven Adjustable guide fence: CNC-controlled Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Lamps for heating the workpiece edge Gluing unit (Hot Melt + Pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartments No.): 1 End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled 08.348 (KW 0.66 x 2) 4 profiles Profile scraping unit 08.516 (4 profiles) Flat scraping unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving, rebating, and profiling 08.183 (Kw 3 x 1)

Būklė: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Veneer edge application possible up to max. 1.0 mm (with limitations) Panel thickness (min/max): 8 mm – 40 mm (with MFA) / 60 mm (without MFA) Control / Software: ICOS Open Feed speed (adjustable) m/min: 6 – 30 Upper pressure system with motorized timing belt Spraying unit (for liquid anti-adhesive) Adjustable stop ruler Jointing unit - 08.378 (2 x 4.5 kW) Gluing unit (hot melt adhesive) 04.1570 Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour milling unit) 08.342 NC-controlled (2 x 0.66 kW) servo Bjdpfx Aaer Ttflohjwi Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal milling unit for grooving, rabbeting, and profiling 08.190 (1 x 4.5 kW)

Būklė: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Setup table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X axis) Automatic positioning of the vacuum pods (Y axis) Automatic tool changer – 18 tool positions Max. working area (X - Y - Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Including separate electrical cabinet and control panel. Total connected load: 34 kW Bwodpfx Aaetixpuohei WORKING UNITS (TOP): 1 vertical main spindle (milling unit) HSK F63 – drive power 18 kW (S6) Saw 90°, fixed, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-position roll magazine Combined aggregate (flush milling/profile scraper) Feed system with brush table 6 clamps for fixing and moving the panel on the machine’s vacuum pods Workpiece outfeed with motorized rollers + right-angle transfer system

Būklė: labai geros būklės (naudotas), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMATTING AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Bjdpfx Aaskt Uuaohswi Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edge material (rolls) thickness (min/max) mm 0.3 / 3 Control/software ICOS Open (Batch Size One) Feed rate (adjustable) m/min 6 - 30 Fully automatic panel infeed system for formatting A1 / 15 No. 2 jointing milling units, NC controlled 08.378 (4 motors x 4.5 kW) Gluing unit (Hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Pre-milling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (NC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine trimming) NC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multiple profile scraper unit (NC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating and profiling 08.190 (3 x 4.5 kW) NC controlled - 90°/180°/270° M.03) FEEDING AND STACKING SYSTEM "SIRIO"

Būklė: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP Software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Bwedoq Nmutepfx Aahji Maximum working area (X - Y - Z) for edge banding (mm): 3100 x 1925 x 60 No. 6 clamping tables with consoles (number of consoles) - mm 1400 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety foot mats No. 1 vertical main spindle (milling unit) HSK F63 (18 kW) Automatic tool change system (carousel changer), 18 tool positions No. 14 independent vertical drilling spindles (2 x 1.2 kW) Cross unit with 4 horizontal drilling spindles + grooving saw (max. diameter mm 125) Edgebanding unit - hot melt glue applicator VT 100 No. 2 edge magazine for roll material OPTIONS: No. 1 adapter unit "FLEX 5" model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Bwsdpfx Aei Hn Srsahsi Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Būklė: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Bwjdsltmnlepfx Aahei Panel thickness (min/max) mm 8 - 60 Control system: ICOS open compact Feed speed m/min (adjustable) 6 - 30 Top pressure belt-driven, spraying unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable guide fence CNC-controlled. Panel infeed system Barcode reader Jointing milling unit with CNC control 08.379 (2 x 4.0 kW) Radiator for edge heating of workpieces Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressing zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (compartment no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spraying unit (for sliding liquid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617 (0.18 kW x 4). Open space Universal milling unit for grooving/rabbetting and profiling 08.190 (4.5 kW x 1)

Būklė: labai geros būklės (naudotas), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE INSERT FOR LOT 1 Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control ICOS open Feed speed m/min (adjustable) 7-35 Top pressure belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled. Panel infeed system A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartment no.) 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m / min Bwjdpfx Asifnzdoahsi Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Sprayer unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Būklė: naudotas, • Dimensions (mm): 80 x 60 • Rubber plate Bwjdpfxebxp Eao Aahsi • Mounting bracket

Būklė: naudotas, mašinos/transporto priemonės numeris: 008301, Pozicija 1: Kantų klijavimo staklės Charge 1 IMA - SIRIO-NOVIMAT/I/R75/1000/R3 Pozicija 2: Iškrovimo įrenginys IMA - SIRIO-NOVIMAT/I/R75/1000/R3 Bwjdpfx Asx A Tmmeahei

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamintojo kodas: 401110 - Būklė: Naudota - Funkcionalumas: Visiškai veikianti - Suderinama mašina: CNC IMA BIMA - Susidomėjus siūlome peržiūros paslaugą, susisiekite su mumis. Svoris ir matmenys transportavimui: 4KG 36X26X21 CM Bwjdpfx Aovu A A Seahsi

Būklė: naudotas, Funkcionalumas: nepatikrintas, Ferwood kodas: AGG0125 - Gamintojo kodas: 147009FSQUM5R66I - Būklė: Naudota - Funkcionalumas: Netestuota - Jei domina, siūlome peržiūros paslaugą, susisiekite su mumis. Svoris ir transportavimo matmenys: 6 kg, 36x26x21 cm Bwjdpfx Aovu Dctoahoi

Būklė: naudotas, Funkcionalumas: nepatikrintas, Ferwood code: RU0008884 - Manufacturer code: - Condition: Used - Functionality: Not tested - Compatible machine: IMA COMBIMA/NOVIMAT edge bander - If interested, we offer refurbishment services; please contact us. Bsdpfxev Hgmfs Aahswi

Būklė: naudotas, Funkcionalumas: nepatikrintas, Ferwood code: RU0000030 - Manufacturer code: 10551904 - Condition: Used - Functionality: Not tested - Compatible machine: IMA ADVANTAGE/NOVIMAT edgebander - If interested, we offer an overhaul service; please contact us. Bedpfx Asv Azf Isahswi

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Ferwood kodas: AGG0010 - Gamintojo kodas: 4-15134 - Būklė: Naudota - Funkcionalumas: Pilnai veikiantis - Suderinama staklė: CNC IMA BIMA - Jei susidomėjote, siūlome atnaujinimo paslaugą, susisiekite su mumis. Transporto svoris ir matmenys: 8 kg, 36x26x21 cm Bwodpfx Asvu Afyeahji

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Ferwood kodas: AGG0085 - Gamintojo kodas: 4970445 - Būklė: naudota - Funkcionalumas: visiškai veikianti - Suderinama mašina: CNC IMA BIMA - Jei susidomėjote, siūlome peržiūros paslaugą, susisiekite. Transportavimo svoris ir matmenys: 6KG, 36X26X21 CM Bwjdpsvu A Insfx Aahoi

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Ferwood kodas: AGG0115 - Gamintojo kodas: 612597021 - Būklė: Naudota - Funkcionalumas: Visiškai veikianti - Suderinama mašina: CNC IMA BIMA - Esant susidomėjimui siūlome peržiūros paslaugas, susisiekite su mumis. Svoris ir gabenimo matmenys: 6 kg 36x26x21 cm Bjdpfx Asvu A Tkoahewi

Būklė: naudotas, Funkcionalumas: nepatikrintas, Ferwood kodas: AGG0125 - Gamintojo kodas: 147009FSQUM5I - Būklė: Naudotas - Funkcionalumas: Netestuotas - Susidomėjus galime pasiūlyti atnaujinimo paslaugą, susisiekite su mumis. svoris ir gabenimo matmenys: 6 kg, 36x26x21 cm Bwedpfx Aevu Db Aoahji

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, plokštės aukštis: 50 mm, Iš įmonės likvidavimo Bwjdpfox Avcdsx Aahoi Tipas: IMA Compact 309 C Pagaminimo metai: 1992 Skirta ritininiams gaminiams ir lentelėms iki 9 mm storio - Klijavimas karšto lydalo granulėmis - Kirtimas - Pjovimas - Plokščias frezavimas - Grandiklis ir poliravimas Apmokėjimas grynais atsiimant. Privatus pardavimas – jokių garantijų.

Gamybos metai: 2001, būklė: geras (naudotas), IMA Gluing Unit Spare part for e.g. IMA 680 / 480 / 980 Edge banding unit for 4-sided and all-around edge banding on butt joints, featuring: - Main pressure roller, diameter 100 mm, and pneumatically controlled follow-up pressure roller, diameter 35 mm - Glue application system for coating the edge material, with temperature and level control - Servo drive for edge transport with automatic adaptation to feed speed - Hot air post-activation unit, 7.5 kW, on glue side - IR emitter 600 Watt on decorative side to prevent deformation of material on small radii - Pneumatically driven crosscut saw - Butt joint edge detection - NC axis Rotation range up to 740 degrees, pneumatic Z-stroke 125 mm Bodjbxx Ikopfx Aahowi - Separate NC axis in Y (for portal also in X), operates independently from main axis Year of manufacture: 2001, removed from IMA 680 V No. 2216 Scope of delivery as shown Please check compatibility with your machine. No returns accepted. The unit was in production use for approx. 2 years and is considered to be in good condition. Technical specifications subject to change.

Būklė: geras (naudotas), IMA LED retrofit aid Bsdpfxsbxx Iuj Aahswi Used, in working condition. Approx. 60 LEDs 15-pin serial connector on both sides Dimensions: 18 x 56.7 x 312 mm, including 10 mm for the connectors Direct purchase available in our online shop on our homepage.

Būklė: geras (naudotas), Gamybos metai: 2001, Hand edge banding device IMA HKA contour edge banding machine The IMA HKA hand edge banding device is a versatile tool for manually applying edge strips or veneer strips to panel-shaped workpieces. It is suitable for materials such as chipboard, blockboard, and MDF. The device can be used both manually and in combination with a processing table, offering high flexibility in application. Year of manufacture: 2001. If you require vacuum clamps, you can purchase new or used ones in our shop. The HKA consists of two main components: Bedpfjv N Nn Dex Aahswi 1. Hand tool: Automatically feeds the edge strip, applies adhesive, and presses it onto the workpiece. 2. Processing table: Includes a vacuum pump, temperature controller, and various control elements. The hand tool can be suspended from a cable hoist to facilitate operation. Operation methods: • Guided workpiece: The hand tool is mounted on the processing table and the workpiece is moved manually. • Guided hand tool: The workpiece is fixed with vacuum suction pads while the hand tool is guided. Technical data: • Working width: 90 mm • Edge thickness: 0.4 - 3 mm • Panel thickness: 16 - 45 mm • Strip feed: 20 - 50 mm • Power consumption: 2.6 kW • Vacuum pump 6 cbm/h • Minimum external radius: Dependent on the bending suitability of the edge material • Minimum internal radius: 150 mm, depending on material property Additional equipment: • Boom for installing a spring balancer • Vacuum clamping table

Būklė: naudotas, Gamybos metai: 2006, IMA Novimat Edge Banding Machine: Manufacturer: IMA Model: Novimat Concept/I/G/80/650/R3 Year of manufacture: 2006 Machine number: 08113 Nominal power: 41 kW Workpiece feed: Glide chain Fence ruler: Adjustable fence ruler 700.080 Infeed table: 63.152 Milling unit: 08.378 Glue level sensor: Available Glue application unit: 04.0832 Bonding unit: 04.1570 PU premelter: 283.203 High-speed tool holder: For high-speed motors End trimming unit: 08.42 Milling unit: 08.0555 Multi-processing unit: 08.348 Multi-profile scraping device: 08.516 Flat scraper: 08.517 Profile copying buffing unit: 08.604 Buffing unit: 08.617-4 Safety equipment: Light barriers, temperature controller, control terminal Additional equipment: Pre-mounted roller conveyor table Total machine length: Approx. 11 / 16 m Extraction system: Included Accessories: Edge magazines: 2 sliding magazines for edging coils, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): Bodpfx Aaernkw Dehswi 2 plasma units Control cabinet Panel return system (Manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, various table lengths Round belt conveyor table Control cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Edge banding machine Bwodpfx Aov T R Ereahoi Manufacturer: IMA Model: Quadromat 3512 U Year of manufacture: 1999 Edge materials: veneer rolls and strips, plastic, solid wood lippings Edge height: 14–50 mm Edge thickness: 0.4–12 mm Spindle speed: 18,000 rpm End trimming unit Milling units Profile scrapers Polishing unit Flat scrapers

Būklė: naujas, Gamybos metai: 2025, Įvairūs klijų bakai kraštų juostoms ir kraštų juostavimo mašinų keturkampiams apdirbimui. Tiekiame naujus klijų bakus arba remontuojame jūsų naudotus. Taip pat parduodame atskiras atsargines dalis. Bsdpfx Aef Tc Rqeahjwi SCM, Stefani, IDM, IMA, Biesse