Illig Ua 100 pirkti naudotą (45)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual loading): 12 mm Max. sheet thickness (automatic loading): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total connected load: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control system, OP 37 panel - Climate-controlled control cabinet Hfjdpfjwf Dvajx Acusn - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individual emitter control for both top and bottom heaters - Parallel clamping frame - Locking of upper reduction frames via pneumatic motor - Locking of lower reduction frames via cylinders - 4 cooling fans - Table vacuum adjustable via cascade circuit - Pre-blow and demolding adjustable via cascade circuit - Large front opening for tool change - Film sag monitoring by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping by vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-release tool clamping system Sheet feeding: - Automatic lifting of the film transport chain by motor - Pneumatic quick-change system for suction plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional retrofit: Preheating system: - Pneumatically operated top heater, overall field control, individual emitters can be switched on/off via toggle switches - Pneumatically operated bottom heater, overall field control, individual emitters can be switched on/off via toggle switches - Temperature control of top and bottom heaters via separate controllers in the BE control cabinet (temperature setting not via operator panel of UA) Optional retrofit for roll processing: - Cross cutter and feed rollers in feeder - Roll stand RO 800

Gamybos metai: 1971, Sąlyga: paruoštas naudoti (naudotas), A universal double-stroke deep-drawing machine by Illig is available. Forming dimensions X/Y: 960mm/560mm, maximum draw depth: 280mm, maximum sheet dimensions X/Y: 960mm/560mm, motor power: 1.5kW, heating capacity: 16.3kW, heating zones: top and bottom. An on-site inspection is possible. Hfodpfxjwixyho Acuen

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1594, TECHNICAL DETAILS Machine number: 1594 Year of manufacture: 1993 Voltage: 3~220 V, 50 Hz Motor power: 3.52 kW Heating capacity: 216.0 kW Rated operating current: 86.5 A Hfsdpsww Igyofx Acujn Permissible air pressure: 10 bar

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1531, darbinė temperatūra: 650 °C, plokštės ilgis: 1 000 mm, plokštės plotis: 700 mm, TECHNICAL DETAILS Film width: 700 mm Type of input current: Alternating current (AC) Input voltage: 400 V Sheet thickness: 10 mm Sheet dimensions: 1,000 x 700 mm Hfjdpfswr Ab Uox Acusn Operating temperature: 650 °C Pump capacity: 100 l/min Vacuum pump power: 3,000 W Compressed air connection: 6 bar Forming height (min.): 300 mm MACHINE DETAILS Overall width: 700 mm Overall length: 3,500 mm Overall height: 3,500 mm Control cabinet width: 1,000 mm EQUIPMENT - 3 pilot top heaters, 1 pilot bottom heater - Motorized adjustment of counter-mould height - Quick clamping system for upper and lower frames - Quick clamping for tools on the lower table - Quick clamping for tools on the upper table - Monitoring of lower film sag - Bubble formation monitoring via electric photo cell - Programmable bubble and demoulding intensity, pneumatic valves in cascade configuration - BUSCH vacuum pump 100 m³/h

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Top heating with individual small radiators operated via toggle switch Bottom heating with large radiator Upper die system Protective grid 4 cooling fans D05 Pre-blowing and demoulding automation Hfedefug Anepfx Acujn

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1990, veikimo valandos: 45 353 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1537, produkto aukštis (maks.): 10 mm, plokštės ilgis: 1 000 mm, plokštės plotis: 700 mm, Hybrid machine for thermoforming sheets or rolls TECHNICAL DETAILS Maximum width: 700 mm Hedpfjwr Abzox Acuefn Maximum plate size: 1,000 x 700 mm Maximum sheet thickness: 10 mm Heating power: 31.1 kW Motor power: 5.59 kW EQUIPMENT - Plate loader type BE without preheating - Roll unwinding device type PR - Upper and lower tables - Schleicher PDPF control unit - Quick clamping system for reducer frames and tools

Sąlyga: geras (naudotas), Gamybos metai: 1990, veikimo valandos: 45 350 h, mašinos/transporto priemonės numeris: 1537, Hybrid machine capable of thermoforming sheets or material from a roll. Machine equipped with a BE-type sheet loader without preheating. Fitted with a PR-type coil unwinder. Equipped with upper and lower tables. Controlled by a Schleicher PDPF control unit. Quick clamping system for reduction frames and tooling. Maximum web width: 700 mm Maximum sheet size: 1000x700 mm Maximum sheet thickness: 10 mm Hodpetv Ivzefx Acuofn We will take care of dismantling and loading onto your truck, which should be made available for pickup.

Sąlyga: geras (naudotas), Gamybos metai: 1990, veikimo valandos: 11 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1531, plėvelės plotis: 700 mm, įvesties srovės tipas: Oro kondicionierius, bendras plotis: 700 mm, bendras ilgis: 3 500 mm, bendras aukštis: 3 500 mm, įėjimo įtampa: 400 V, vakuuminio siurblio galia: 3 000 W, suslėgto oro jungtis: 6 juosta, darbinis plotis: 700 mm, siurblio našumas: 100 l/min, formos aukštis (min.): 300 mm, valdymo spintos plotis: 1 000 mm, darbinė temperatūra: 650 °C, UA 100 1 g Thermoforming Machine, year 1990, in good working condition. Hodpfx Acot Iraceuofn Maximum sheet dimensions: 1000x700x10 mm Top heating: 3 pilot emitters, bottom heating: 1 pilot emitter Motorized adjustment of counter-mold height Quick clamping of upper and lower frames Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film bow control Blistering with photoelectric cell Adjustable and storable blistering and demolding intensity (cascade pneumatic valves) BUSCH vacuum pump, 100 m³/h Machine stopped and stored following replacement by a new ILLIG UA 4 g automatic machine Price includes disassembled machine loaded onto your truck Possibility to recommission the machine if you wish to inspect it

Sąlyga: naudotas, Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1506, plėvelės plotis: 1 000 mm, įvesties srovės tipas: trifazis, slėgis: 6 juosta, bendras plotis: 700 mm, bendras ilgis: 1 000 mm, bendras aukštis: 350 mm, įėjimo įtampa: 400 V, maks. lakšto storis: 10 mm, šildymo galia: 30 kW (40,79 AG), bendras svoris: 1 500 kg, įrankio aukštis: 490 mm, Strojna vrsta: ILLIG UA 100 G Številka stroja: 1506 Leto izdelave: 1988 Skupna masa: pribl. 1,5 tone Napajanje: 3x400V Skupna poraba energije: 35 kWh Hsdpfx Aowfdd Decuofn Skupna moč grel (spodaj in zgoraj): 30 kWh Tip grelne plošče: keramična Maks. dimenzija pločevine: 1000x700 mm Min. dimenzija pločevine: 310x210 mm Maks. debelina pločevine (ročno nalaganje): 12 mm Maks. oblikovalno območje: 960x660 mm Min. oblikovalno območje: 270x170 mm Višina pozitivnega izdelka: 350 mm Višina negativnega izdelka: 350 mm Maks. višina orodja: 490 mm Okoli leta 2020 je bil stroj obnovljen. Vgrajen je bil nov Omron krmilni sistem, ki je nadomestil originalnega Schleicherja, prav tako pa smo posodobili ožičenje in električno omaro.

Sąlyga: naudotas, Gamybos metai: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Max. material size: 1500 x 1250 mm - Max. forming area: 1460 x 1210 mm - Max. tool height: 600 mm - Max. material thickness: 12 mm Forming Station Hfodpoxlzrcefx Acuen - Schleicher P03 control system - Automatic set-up and removal functions - Top heater with ceramic emitters and 5-zone control - Bottom heater with ceramic emitters and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Parallel top frame, longitudinal beams for fixed-format frame use - Lower clamping frame for frame insertion from below, central clamping via electric motor - Pneumatic lower table with rapid/creep speed, steplessly adjustable - Upper plug assist with rapid/creep speed, steplessly adjustable - Pre-blow automatic, steplessly adjustable - Pre-vacuum, steplessly adjustable - Automatic demoulding, steplessly adjustable - Sheet sag monitoring via light barrier with support air - 6-fold cooling blower - Large front opening for tool change - Vacuum pump Sheet Feeding - Automatic sheet feeding device - Final heating in the feeder, for final or pre-heating of sheets - Motorized sheet lifter - Motorized sheet positioning - Motorized transport lifter - Motorized transport width adjustment

Gamybos metai: 1998, Sąlyga: naudotas, ILLIG UA 225 ED giluminio tempimo mašina, plokščių automatas, plokščių formavimo mašina Giluminio tempimo mašina / plokščių formavimo mašina Gamintojas: ILLIG Tipas: UA 225 ED Pagaminimo metai: 1998 Darbo valandos: 40 191 Darbinis plotas: 2 200 x 1 200 mm Būklė: Hodpfx Acoxg I Dujujfn Įrenginys vis dar prijungtas prie elektros ir veikė iki 2024 m. birželio. Parduodama dėl bankroto.

Sąlyga: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 191, įvesties srovės tipas: trifazis, slėgis: 10 juosta, bendras plotis: 3 050 mm, bendras ilgis: 2 400 mm, bendras aukštis: 3 480 mm, valdymo spintos plotis: 850 mm, valdymo spintos aukštis: 1 800 mm, valdymo spintos ilgis: 600 mm, This machine was overhauled, installed, and commissioned at a customer site in 2020 and has seen little to no use since then. The machine is in excellent condition. It has been professionally disconnected and transported. Hfsdpfxewpfrko Acuen

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, ILLIG universalus formavimo aparatas, tipas UA 155 4g solo Techniniai duomenys - Siemens valdymas - Didžiausias medžiagos dydis: 1500 x 1250 mm - Didžiausias formavimo plotas: 1450 x 1200 mm - Didžiausias įrankio aukštis: 700 mm - Didžiausias medžiagos storis: 12 mm - Šildymo galia: 96 kW Hfedpsxlzqfjfx Acujn - Bendra galia: 105 kW - Elektros saugiklis: 160 A - Vakuuminio siurblio galia: 250 m³/h - Suspausto oro poreikis: 6 bar Komplektacija - Viršutinis šildymas su 5 zonų reguliavimu HTS (700ºC) - Apatinis šildymas su 5 zonų reguliavimu HTS (500ºC) - Aušinimo ventiliatorius D06 - Stalviršio kaskada - Vakuuminė kaskada - Viršutinis presavimo štampas - Įskaitant ILLIG aušinimo ir temperatūros reguliavimo įrenginį

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Technical Data: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function - Top heating with ceramic emitters (500W), 4-zone control - Individually selectable top heating elements, including lowering function - Bottom heating with ceramic emitters (300W), 4-zone control - Individually selectable bottom heating elements, including lowering function - Program and heating setting memory - Clamping frame with quick-change system - Parallel top frame, longitudinal rails for use of fixed-format frames - Lower clamping frame for installation from below, central clamping via electric motor - Pneumatic lower table with fast/creep speed, adjustable in 15 stages via control panel - Top punch with fast/creep speed, adjustable in 7 stages - Vacuum pump with cascade control, adjustable in 15 stages via control panel - Pre-blow automatic function, percentage adjustable - Pre-suction, percentage adjustable - Demoulding automatic function, percentage adjustable - Sheet sag control via light barrier with support air - 8-fold cooling fan with spray nozzle cooling - Large front opening for tool change Hedpfxewf Eb Ro Acuefn Feeding - Automatic sheet feeding system - Centering table for precise positioning of sheets in the feed - Motorized sheet lifter - Motorized sheet positioning - Motorized transport lifter - Motorized transport width adjustment

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Max. forming area: 960 x 660 mm Min. forming area: 269 x 444 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 450 mm Year of manufacture: 2000 Technical equipment of forming station UA 101 L: - Siemens control system with swiveling operating panel - Motorized movement of top and bottom heaters via swing arm - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 3 temperature control circuits via pilot emitters - Height-adjustable top heater - Upper punch system - Parallel tensioning frame - Automatic window plate adjustment on lower frame Hfedpfxjwf Dtxe Acuen - Automatic window plate adjustment on upper frame - Adjustable vacuum for under-table via cascade control - Pre-blow/demolding adjustable via cascade control - 4 cooling fans - Front opening for tool change, pneumatically locked - Film sag control - Film pre-blow control - Vacuum provision at upper punch - Tempering connection - Automatic tool change system for large setups - Vacuum pump Technical equipment of feeder BE 101 L: - Top and bottom preheating - Motorized movement of top and bottom heaters via swing arm - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 3 temperature control circuits via pilot emitters - Height-adjustable top heater - Motorized parallel-lifting film transport - Film transport via pin chain - Film guidance via rollers - Automatic transport width adjustment - Motorized plate lifter with automatic tool clamping - Mobile plate loading trolley Options (price on request): - Pyrometer in top heater for temperature measurement on the film - Retrofit for roller processing

Sąlyga: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, plėvelės plotis: 1 500 mm, Technical specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum draw depth: 700 mm - Maximum material thickness: 12 mm Equipment: Forming station - Siemens S7 control system - Fully automatic set-up function - Upper heater with 7 pilot radiators, controlled via S7 touchscreen joystick (motorized travel) - Lower heater with 7 pilot radiators, controlled via S7 touchscreen joystick (motorized travel) - Contactless radiator control (solid state relay) - Upper plug assist system with synchronized movement (hydraulically adjustable) - Clamping frame (hydraulically adjustable) - Tool table (hydraulically adjustable) - Central cooling system via fresh air supply - Triple film sag control with automatic support air function - Triple tool monitoring - Automatic air box venting - Quick change system for mold, clamping frame, and plug assist as a package, fully and semi-automatic cycles - Mold tool extendable on front flap - Forming vacuum monitoring - Pre-blow automatic control via pre-blow time - Automatic basic setting with self-optimization of radiator temperatures - Heating, cooling, and process cycle times - Cycle time calculation for all expansion stages - Position measuring system for table position - Temperature control for clamping frame, upper plug assist, and tool - Storage of programs and heating settings - Lower clamping frame for frame mounting from below, central clamping via electric motor - Cascade for vacuum, pre-blow, de-moulding, tool table, upper plug assist Hfsdjft S Eajpfx Acujn - Adjustable speed for tool table, upper plug assist, and clamping frame - Pneumatically lockable front door - Main electrical cabinet with air conditioning Automatic sheet and roll feeding - Film unwinding rack incl. lifting device and pneumatic brake - Automatic sheet magazine centering (motorized adjustment) - Upper heater usable as pre-heater or main heater (motorized travel) - Lower heater usable as pre-heater or main heater (motorized travel) - Motorized sheet lifter - Vacuum pump for grained material - Material transport via transport chain and roller rail for improved transport, even with thin material Options available upon request

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Plate size: 1250 x 1500 mm Forming area: 1200 x 1460 mm Drawing depth: 700 mm Hjdpswf Ea Tsfx Acuofn If you would like further details or a quotation, please feel free to contact us.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Sheet size: 2000 x 1000 mm Forming area: 1960 x 960 mm Draw depth: 600 mm Hedpjwf Ebwefx Acujfn If you would like more details or a quotation, please feel free to contact us.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Sheet size: 1000 x 1500 mm Forming area: 960 x 1460 mm Hfsdpfx Aswf D S Ujcusn Drawing depth: 600 mm If you would like further details or a quotation, please feel free to contact us.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Sheet size: 1000 x 1500 mm Hedewf D R Rspfx Acusfn Forming area: 960 x 1460 mm Draw depth: 600 mm If you would like further details or a quotation, please feel free to contact us.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), TS 100 c cross-cut saw, equipped with conveyor belt, extraction belt, extraction system. The conveyor and saw band speeds are adjustable. Includes 4 hold-down devices, new running wheels, and new bearings. Hjdpfxsfua Drj Acuofn The machine has been completely overhauled and newly painted. Clearance width: 600 mm. Further details available on request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, veikimo valandos: 41 685 h, Techniniai duomenys: Nominali galia, kW: 11,3 Formavimo plotas, mm: 475 x 250 Maks. plėvelės plotis, mm: 495 Min. plėvelės plotis, mm: 150 Maks. padavimo ilgis, mm: 280 Min. padavimo ilgis, mm: 50 Maks. traukos gylis / neigiamas, mm: 100 Ciklo dažnis, min.–maks.: 48 Oro sąnaudos/ciklas prie 6 bar: 100 Nl (suslėgtas oras) Hedpfx Aeq A Um Rjcusfn Išskirtina šilumos energija: su viršutiniu šildymu apie: 10 260 KJ/h su viršutiniu ir apatiniu šildymu apie: 17 715 KJ/h Papildoma komplektacija: Yra dvigubo dugno sistema Valdymo spinta: įtraukta

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Techniniai duomenys: • 4 pozicijų besisukantis stalas • Didžiausias sandarinimo plotas 350 x 250 • Didžiausias bliesterio gylis 70 – 100 mm priklausomai nuo produkto tipo • Sandarinimo jėga 12 800 N • Sandarinimo kaitinimo galia 1,75 kW • Kartono padavėjas • Pakuotės išstūmėjas Hfsdpfofua Dcox Acujn • Kartono formavimo įrenginys • Kabelis su CEE 16A kištuku • Svoris apie 750 kg Mašina prieinama visose versijose b, b-2, b-3, b-4.

Sąlyga: Defektas atsarginių dalių laikiklis (naudotas), Manufacturer: Illig Hfjdpfeuk Dwfsx Acujn Model: HSA 50C The machine is incomplete and not operational! For spare parts only!!

Sąlyga: naudotas, Gamybos metai: 1990, Mašinos aprašymas: naudota pakavimo mašina (termoformavimo linija) Gamintojas: Adolf Illig Modelis: SB 53C - DIN Pagaminimo metai: 1990 Motoro galia: 1,24 kW Matmenys: I 1.600 x P 1.135 x A 2.710 mm Tuščias svoris: 500 kg Techninė dokumentacija: Yra Pastabos: Šildymo galia: 4,5 kW (15 keramikinių plokščių šildytuvų) Vakuumo įranga: didžiausias vakuumo lygis 0,95 kp/cm2 Formatai: Formavimo plotas: 405×500 mm Dėžės dydis: 400×495 mm Plėvelės plotis: 445 mm Teigiama gylio traukimo: 150 mm Neigiama gylio traukimo: 150 mm Pakuotės aukštis: 150 mm Plėvelės ritinio skersmuo (blister): 400 mm Plėvelės ritinio skersmuo (skin): 350 mm Hodpfx Acexm Sa Heusfn Plėvelės ritinio vidinis skersmuo: 70 mm Būklė: naudota Kaina: pagal užklausą