Horizontalus Lenktuvai pirkti naudotą (6 246)

Būklė: naujas, Cutting diameter: 355 mm Saw band dimensions: 3770 x 34 x 1.1 mm Laedpfxemhm Aqj Aaxsh Cutting speed: 20 - 80 m/min Cutting width: 490 x 280 mm Cutting capacity at 45° round: 290 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 60° round: 230 mm Cutting capacity at 60° square: 180 mm Connection voltage: 400 Volt Total power requirement: 2.2 kW Machine weight: approx. 0.7 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Mitre Bandsaw Semi-Automatic - Mitre cuts up to 45° left and right - Mitre cuts up to 60° right - Vice with quick-release clamp - Band tension control via pressure gauge - Electric coolant system

Būklė: labai geros būklės (naudotas), Horizontalaus konvejerio juostos matmenys: 2600 x 400 mm. Lodpfx Aaoin Np Njxjah Pagaminimo metai: Kaina: 1650 eurų. Kontaktinis asmuo: ponas Raineris Eckerle.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 000 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 2 000 mm, stalo apkrova: 6 000 kg, ašies skersmuo: 110 mm, veleno greitis (min.): 5 aps./min, veleno greitis (maks.): 1 120 aps./min, bendras aukštis: 4 300 mm, bendras ilgis: 7 200 mm, bendras plotis: 4 600 mm, stalo ilgis: 1 600 mm, stalo plotis: 1 400 mm, padavimo ilgis W ašis: 800 mm, įvesties srovės tipas: Oro kondicionierius, spindelio eiga: 800 mm, bendras svoris: 26 000 kg, paskutinio kapitalinio remonto metai: 2020, For sale is a Union Gera BFT 110/6 horizontal boring mill. The machine was manufactured around 1980 and was completely overhauled by us in 2009/2010. Since then, it has been under our professional service and care. Scope of the overhaul included, among others: - Electrical system almost completely renewed - New control cabinet including Siemens S7-200 PLC system - New Siemens Simodrive 611 drive technology, feed motors Siemens 1FK7 - Heidenhain TNC 124 position controller + electronic handwheel - Heidenhain linear measuring systems on X, Y, and Z axes - Heidenhain rotary encoder on B axis (rotary table) - Spindle drive: three-phase asynchronous motor with DC braking electronics - Replacement/overhaul of all hydraulic components - New ball screw drives (KGT) on X and Y axes - Overhaul of the drive systems of all feed axes - All axes have been newly scraped - Refurbishment of lubrication systems for axes and spindle head - New bearings and overhaul of gearbox components in the spindle head For further technical details, please refer to the photos or contact us directly. Machine features: - Heidenhain TNC 124 position controller + electronic handwheel - Facing slide (U axis) - Electric tool clamping system SK 50 The machine is being sold due to capacity reasons. Ledpfxeu U Hvwo Aaxoah The system is fully operational and immediately available. It meets the machining accuracy as per the manufacturer's protocol. Technical documentation is available. The machine is fully functional and can be inspected under power by prior arrangement. This offer is non-binding and subject to our terms and conditions of sale and delivery. Errors and prior sale excepted. As warranty is excluded when purchasing used machinery, we recommend that customers inspect the machine prior to finalizing any purchase. Payment must be made in advance by bank transfer, as is customary for used machinery. Dismantling, relocation, installation, commissioning, and geometric alignment at the new site can be provided by us upon request. We are happy to submit a separate quotation for this. Delivery within the EU is possible on request.

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Vice opening: 285 mm Lasdpfxefg E H Se Aaxsh Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 485 kg Space requirement approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual operation, equipped with an MEP-28 control unit for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw bow lowers for the cut – Motor stops – Saw bow lifts – Vice opens. Semi-automatic dynamic system (manual lowering of the saw arm to the desired position and cycle start via the hand switch.) Key features: - New centralized control console mounted on an articulated arm, allowing the operator to access controls easily from any working position. - Low-voltage control panel: - Polyester membrane keypad with thermoformed raised buttons and operation control light. - Display shows: * Diagnostics (messages in the user's language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for the performed cut * Saw motor current draw * Blade tension * Blade speed * Numeric display of head position. - Manual 24-V cycle switch handle, IP55 rated. - Complete program for all special cutting cycles. - Option to set up additional special cutting cycles for specific applications. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Large worktable with turntable on roller bearings, 265 mm with preloaded thrust bearings, installed. - Dual blade speed (36/72 m/min.) with control - Prepared for the installation of an electronic inverter for stepless variation of blade speed from 20 to 90 m/min. - Programmable stroke of the saw arm directly from the control panel for adaptation to the material being cut. - Clamping device adjustable to the left and right, with quick-release vice. - Manual blade tension control with electronic converter display on screen. - Base frame with extendable coolant tray. - Electric coolant pump for band cooling and lubrication. - Preparation for the installation of a minimal lubrication system for the saw band (optional), in addition to standard lubrication with emulsified oil. - Chip cleaning brush. - Machine is designed for pallet truck transport. - Length stop for repetitive cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal bandsaw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Būklė: naujas, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Blade speed: 40/80 m/min Laodpfx Asfg E H Tjaxjh Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering is performed by the saw’s own weight, compensated by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feed. Electrical control panel (marked wiring connections, indicator light for operational readiness, main safety switch equipped with padlock, changeover or speed switch, emergency stop, thermomagnetic protection, 24-volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vise with quick-clamping device. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubrication of the bandsaw blade. Chip removal brush. Adjustable precision stops for repeated cuts of equal length. Machine designed for pallet truck transport. Bimetal bandsaw blade for solid and profiled material. Tools and operating manual.

Būklė: naujas, Cutting diameter: 330 mm Cutting range at 90° (flat): 510 x 320 mm Cutting range at 90° (square): 320 x 320 mm Lajdpfx Aajfg E Ibsxjh Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a 4640 x 34 x 1.1 mm blade for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console on a swivel arm allows comfortable and safe operation from any position. Electronic inverter for stepless adjustment of the blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring an engraved, precise fine scale, easily adjustable and mounted.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 15 t, ryšulio plotis: 700 mm, ryšulio aukštis: 700 mm, balo svoris: 220 kg, įėjimo įtampa: 400 V, galia: 4 kW (5,44 AG), tuščias svoris: 2 700 kg, Manufacturer: Borg Baling Company Model: S-15KK Year of manufacture: 2002 Power supply: 3x400V, 4kW, 14.5A Pressing force: 15 t Net weight: 2.7 t Maximum bale dimensions: 700 x 700 x 1000 mm Lajdpfx Aajh Dy Rfexsh Wide selection of used machinery and industrial equipment

Gamybos metai: 2001, būklė: paruoštas naudoti (naudotas), Horizontal Machining Center Giddings & Lewis HMC 410 Pallet size: 1,250 x 1,600 mm Maximum pallet load: 7,000 kg Pallet change time: 55 sec. Number of pallets: 2 pcs Table indexing: B-axis 0.001° Table traverse (X): 3,000 mm Spindle vertical travel (Y): 2,100 mm Column longitudinal travel (Z): 1,800 mm Feed rate (X/Y/Z): 1 – 40,000 mm/min Rapid traverse (X/Y/Z): 40 m/min Rotary table speed: 6 rpm Max. swing diameter: Ø2,500 mm Spindle taper: ISO 50 Spindle motor power: 30 kW Spindle speed: 20 – 5,000 rpm Automatic tool changer: 120 stations CNC controller: Siemens Sinumerik 840D Max. workpiece height: 2,000 mm Accessories Hexagon radio tool measuring probe Loading stations: 2 pcs Year of manufacture: 2001 (See also further offers by this advertiser.) Ljdpfeguk Icsx Aaxoah

Būklė: naujas, modelio pavadinimas Lodpfx Asgvkafeaxsah Shark 332-1 SXI evo

Būklė: naujas, Model designation Shark 282 CCS Lajdsgvkbcepfx Aaxsh

Būklė: naujas, Model designation Lodpogvkctefx Aaxsah Shark 282 SXI evo

Gamybos metai: 1987, būklė: naudotas, Maximum grinding length: 630 mm Maximum grinding width: 200 mm Workpiece height: ... mm X-axis travel max.: 250 mm Y-axis travel max.: 710 mm Distance spindle center to table max.: 500 mm Table clamping area: 0.25 m² Maximum table load: 1.1 t Table speed - stepless: 2 - 18 m/min Ljdpfsgbgawex Aaxeah Automatic cross feed: ... Dust extraction: 0.25 kW Coolant pump: 0.09 kW Total power requirement approx.: 4.5 kW Machine weight approx.: 1.3 t Required space approx.: 2400 x 1600 x 1900 mm Adjustments: Y-axis: 1 scale division = 0.005 mm Z-axis: 1 scale division = 0.002 mm Manual cross adjustment (within the 250 mm Y-axis range): 80 mm Speeds: Automatic cross feed Travel in Y direction: - intermittent: 0.2 - 20 mm/stroke - continuous: 0 - 4 m/min Grinding wheel diameter max.: 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digital display for 2 positions/vertical infeed

Būklė: naujas, Pressing force: 28 t Piston stroke: 180 mm Piston diameter: 130 mm Table size: 300 x 550 mm Working speed: 2 - 9.8 mm/sec Return speed: 20 mm/sec Maximum pressure: 200 bar Bending capacity – flat steel: 200 x 10 mm Machine weight approx. 800 kg Dimensions approx. 1150 x 1103 x 750 mm NC control for setting the piston stroke and storing up to 100 programs Selector switch for manual or semi-automatic operation Ljdpfxoqzmgqo Aaxoah Flow control valve and pressure control valve Integrated pressure gauge Worktable with angle graduation Rear stop

Gamybos metai: 2003, būklė: naudotas, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Cutting capacity – Rectangle: 330 x 260 mm Cutting capacity – Square: 260 mm Control system: Evolution Working height: 870 mm Laedpfora Rrljx Aaxsh Saw blade speed: 40 / 80 m/min Machine weight: approx. 1050 kg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Prekė: D-6670-Talpa 2500 Naudota nerūdijančio plieno talpa, Talpa: 2.500 l, Vienasienė Lasdjv Sztdopfx Aaxsh Pagaminta Botax Danijoje Nerūdijančio plieno talpa AISI 304 (be maišytuvo) Matmenys: Ø1100 mm, ilgis 2600 mm Vienasienė, 4 įėjimai/išėjimai Maks. slėgis: 0,5 bar AISI 316

Būklė: naujas, Gamybos metai: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block bottom bags or flat pouches. Modules for specific pouch features such as zip/press seal, screw cap (spout), and gusset form can be integrated. Optional: batch/date printer, gas flushing module. Pouch detectors check the correct positioning and complete opening of the doypack pouch. Once the pouch is detected, the product is dispensed into the bag via the filling spout. The sealing area is kept clean during this process. A special gripping system holds the stand-up pouch securely in position during filling, before the doypack pouch is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Specifications: Stainless steel housing (SS304); maximum idle machine cycle: 10 cycles/minute; bag width: 250-450mm; bag length: 250-500mm; required compressed air: 6.5 bar, 0.2 m³/min; power: 220V, single-phase; machine dimensions: L1150xW950xH1570mm. Lsdpfx Ajv Nllrjaxsah Please note that our new equipment prices are often lower than typical used equipment prices. Feel free to inquire and inform us about your packaging requirements. We usually have 30-50 different new machines available from stock at all times. For custom-manufactured machines, we offer very short lead times starting from approx. 3 weeks. All machines are available with full warranty.

Būklė: naujas, Gamybos metai: 2025, Horizontal packaging machine, MINI VERSION, for pre-made Doypacks, block-bottom bags, or flat pouches, available as a duplex version for higher output. Modules for specific pouch features such as zip/press closures, screw caps (spouts), or gusset shaping can be integrated. Options: batch/date printer, gas flushing module. Pouch detectors verify correct placement and complete opening of the Doypack. As soon as the pouch is detected, the product is dispensed into the bag via the filling spout. The sealing area is kept clean throughout the process. A special gripping system holds the stand-up pouch precisely in position during filling, before the Doypack is closed and sealed. Features: MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Specifications: stainless steel housing (SS304); max. machine cycle rate idle: 25 cycles/min; bag width: 100–300 mm; bag length: 100–350 mm; required compressed air: 6.5 bar, 0.4 m³/min; power: 220V, single phase, 2 kW. Please note that our new machine prices are often below typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. - Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines we also offer very short delivery times starting at approximately 3 weeks. - All machines come with a full warranty. Lasdpfsv Nllxsx Aaxjh

Būklė: naujas, Gamybos metai: 2025, Filling and capping machine for dosing liquids and pastes into stand-up pouches (Doypacks) with spout and screw cap. The rotary machine is specifically designed for filling all types of liquids such as water, juices, sauces like soy sauce, salad dressings, tomato sauce, or higher-viscosity products such as grill/BBQ sauces, honey, and even viscous products like peanut butter, fruit jam, nut nougat cream, etc. The filling and capping machine is equipped with six filling heads for dosing liquids and six heads each for positioning and capping the spout closures. The production process is fully automated, from pouch feeding, filling, nozzle cleaning, cap infeed via supply elevator, screwing of the caps, through to discharging the finished products. To ensure precise filling volumes, the liquid level is continuously monitored. PLC control system, touchscreen operation panel (menu available in various languages, e.g. English, German, etc.). Suitable for pre-made stand-up pouches with side or top spout (corner or top spout). - Specifications: Filling range: 150 ml (customizable); Number of filling heads: 6; max. machine cycle rate in idle mode: 18 cycles/min (equals max. 108 bags/min); Power: 220/380V, 3-phase, 1.2 kW; Compressed air pressure and consumption: 5-7 bar, 0.65 m³; Product-contact parts made of stainless steel AISI 316, non-contact parts made of stainless steel AISI 304; Machine dimensions LxWxH: 1800x1150x1950mm; Weight: 1000 kg. Lodpfx Aaov Nlm Nsxsah Please note that our new machine prices are often below typical used machine prices. Please feel free to send us your inquiry and specify your packaging requirements. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times from approx. 3 weeks. – All machines are supplied with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (Doypacks) with spout and screw cap. This rotary machine is specifically designed for filling all types of liquids such as water, juices, sauces like soy sauce, salad dressings, tomato sauce, or higher viscosity products such as BBQ sauces, honey, and even viscous pastes like peanut butter, fruit jam, or hazelnut-chocolate spreads. The filling and capping machine is equipped with six filling heads for dispensing liquids, as well as six heads each for positioning and sealing the spout closures. The production process is fully automated, encompassing pouch feeding, filling, spout cleaning, cap delivery via feed elevator, cap screwing, and discharge of the finished products. To ensure precise fill volumes, continuous monitoring of liquid levels is performed. PLC control, touchscreen operation monitor (menu available in multiple languages, e.g. English, German, etc.). Includes CIP system and UV sterilization lamp. Suitable for pre-made stand-up pouches with corner or top spout. — Specifications: Spout design: double guide ring; Filling range: 50–500ml (adjustable); Number of filling heads: 6; Max. machine cycle rate idle: 16 cycles/min (equivalent to max. 100 bags/min); Power: 2.5kW, 220/380V, 3-phase; Air pressure and compressed air consumption: 6–7 bar, 0.7 m³/min; all parts in contact with the product are made of 316 stainless steel, non-contact parts are made of 304 stainless steel; machine dimensions without infeed conveyor: L2600×W1830×H2050mm; infeed conveyor dimensions: L2000×W400×H1500mm; weight: 1700kg. Please note that our new prices are often below the common prices for used machines. Simply contact us with your packaging requirements. – We typically have 30–50 different new machines available ex-stock at any time. For customized machines, we offer very short delivery times starting from around 3 weeks. – All machines are available with a full warranty. Lajdpfx Aasv Nlnasxjh

Būklė: naujas, Gamybos metai: 2025, Filling and capping machine for dosing liquids and pastes into stand-up pouches (Doypacks) with screw cap (spout). Suitable for pre-made stand-up pouches with a side-mounted spout (corner spout) or a spout on top. The rotary indexing machine is equipped with 3 filling units, each featuring two filling heads for liquid dosing and two heads each for positioning and capping the spout caps. Additional features include: feed elevator for spout caps, external CIP cleaning module, and an air purification system for the interior of the machine. Electronic components by Schneider and Omron, PLC and touchscreen by SIEMENS, pneumatic components by AIRTAC. - Specifications: Filling volume: max. 3000ml; Number of filling heads: 6; Maximum machine cycle rate (idle): 26 cycles/min; Power supply: 220/380V / 2.5kW; Air pressure and compressed air consumption: 5-7bar, 0.7m³; Machine dimensions LxWxH: 2600x1630x1900mm; Weight: 1600kg. Please note that our new machine prices are often lower than standard used equipment prices. Feel free to inquire and tell us about your packaging requirements. Generally, 30-50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from approx. 3 weeks. All machines are supplied with a full warranty. Lajdjv Nlngjpfx Aaxoh

Gamybos metai: 2025, būklė: naujas, Horizontally operating, intermittently, gear-driven filling and sealing machine for filling and further processing of pre-made flat pouches or doypacks without zip closure. Particularly suitable for medium-sized pre-made pouches. Integration of various dispensing systems is possible (auger filler, scale, volumetric dosing, liquid, paste, and other dispensing units). One pouch is processed per production cycle. The standard version is equipped with one dosing unit and one hopper. The machine can optionally be fitted with an additional dosing unit and a second hopper, allowing either the processing of two different materials or splitting the filling process, thus increasing production speed (especially relevant for viscous products). Main components: PLC, touchscreen operation monitor (menu available in several languages, e.g., English, German, etc.), temperature control. - Specifications: Pouch sizes (min.-max.): L(80-310)xW(60-180)mm; max. filling capacity: 1200ml; max. machine cycle rate in idle: 50 cycles/minute; 1.8 kW; 12 m³/h; machine dimensions: (L)1990x(W)970x(H)1390mm; weight: 700kg. All parts in contact with the product are made of stainless steel (SS304). The dosing units and/or additional optional attachments (e.g., discharge conveyor or similar) shown in the machine photo are optional extras and are for illustrative purposes only. The machine is suitable for a wide range of composite films. We are happy to check and confirm compatibility based on a material sample. The machine/system is also available in other versions for various packaging sizes and production speeds. Please note that our new prices are often below typical used prices. Please feel free to contact us and tell us about your packaging requirements. – We usually have 30-50 different new machines available from stock at any time. For custom-built machines, we offer very short delivery times starting from around 3 weeks. – All machines are available with a full warranty. Laodpfx Aasv Nlntsxeh

Gamybos metai: 2025, būklė: naujas, Horizontally operating, intermittent, servo-driven filling and sealing machine for filling and further processing of pre-made flat pouches or zip-lock Doypacks. Particularly suitable for medium-sized pre-made bags. Various filling systems can be integrated (auger filler, weigher, volumetric dosing, liquid, paste, and other dosing units). One bag is processed per production cycle. The standard configuration includes one dosing unit and one filling hopper. The machine can optionally be equipped with an additional dosing unit and a second hopper, allowing either processing of two different materials or split filling, thereby increasing production speed (relevant, for example, with viscous products). Main components: PLC, touchscreen control panel (menu available in various languages such as English, German, etc.), temperature control. Lodpfjv Nlnysx Aaxoah - Specifications: Bag size (min.-max.): L(80-310)xW(60-180)mm; max. filling capacity: 1200ml; max. machine cycle rate (no load): 50 cycles/minute; 1.8kW; 12m³/h; machine dimensions: (L)1990x(W)970x(H)1390mm; weight: 700kg. All product-contact parts are made of stainless steel (SS304). Dosing units and/or additional modules (e.g. outfeed conveyor or similar) shown in the machine photos are additional options and shown for illustration only. The machine is suitable for use with various laminate films. We are happy to check and confirm corresponding compatibility based on product samples. The machine/system is also available in further versions for different packaging sizes and production speeds. Please note that our new equipment prices are often below typical used machinery prices. Simply contact us and let us know your packaging requirements. – We generally have 30–50 different new machines available from stock. For custom machines, we offer very short delivery times starting at around 3 weeks. – All machines come with a full warranty.

Gamybos metai: 2025, būklė: naujas, Horizontally operating, intermittent, gear-driven filling and sealing machine for filling and further processing of pre-made flat pouches or Doypacks with a screw cap at the top. Particularly suited for medium-sized pre-made pouches. Integration of liquid and paste fillers is possible. One pouch is processed per production cycle. By default, the machine is equipped with one dosing unit and one filling hopper. It can be optionally fitted with an additional dosing unit and a second filling hopper, enabling either the processing of two different materials or splitting of the filling process, which increases production speed (especially relevant for viscous products). Main components: PLC, touchscreen operating monitor (menu available in multiple languages, such as English, German, etc.), temperature control. - Specifications: Pouch size (min.-max.): L(80-310)xW(60-180)mm; max. filling capacity: 1200ml; max. idle machine cycle rate: 50 cycles/minute; 1.8kW; 12m³/h; machine dimensions: (L)1990x(W)970x(H)1390mm; weight: 700kg. All parts in contact with the product are made of stainless steel (SS304). The dosing units and/or additional add-on modules (e.g., exit conveyor belt or similar), visible in the machine photo, are optional extras for this listing and are shown for illustration purposes only. The machine is suitable for a wide range of composite films. We are happy to check and confirm compatibility based on sampling. Laodpfov Nln Hjx Aaxeh The machine/system is also available in additional versions for various packaging sizes and packaging speeds. Please note that our new prices are frequently lower than the typical used prices. Feel free to inquire and let us know your packaging requirements. - There are usually 30-50 different new machines immediately available from stock. For custom-built machines, we offer very short lead times from around 3 weeks. - All machines are available with full warranty.

Gamybos metai: 2025, būklė: naujas, Horizontally operating, intermittent, gear-driven filling and sealing machine for processing and further handling of pre-made flat bags or doypacks without zip closure. Particularly suitable for large pre-made bags. Integration of various dosing systems is possible (auger filler, scale, volumetric dosing, liquid, paste, and other dispensing units). One bag is processed per production step. By default, 1 dosing unit is provided and accordingly 1 feed hopper is installed. It is possible to equip the machine with an additional dosing unit and a second feed hopper, enabling the processing of either two different materials or splitting the filling process, thereby increasing production speed (relevant, for example, with viscous products). Main components: PLC, touchscreen operator panel (menu available in various languages such as English, German, etc.), temperature control. Specifications: Bag sizes (min.-max.): L(110-310)xW(90-210)mm; max. fill capacity: 1,600ml; max. machine cycle rate idle: 50 cycles/minute; 4.5kW; 12m³/h; machine dimensions: (L)2700x(W)970x(H)1400mm; weight: 900kg. All product-contact parts are made of stainless steel (SS304). The dosing units and/or other supplementary modules (e.g., discharge conveyor or similar) shown in the machine photo are additional options for this item and are for illustrative purposes only. The machine is suitable for a wide range of composite films. We are happy to check and confirm the appropriate compatibility based on a sample. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Laodjv Nln Tepfx Aaxsh Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. - Normally, 30–50 different new machines are always available from stock. For machines manufactured to customer specifications, we offer very short delivery times starting from approximately 3 weeks. - All machines are available with a full warranty.

Gamybos metai: 2025, būklė: naujas, Horizontally operating, intermittently running, gear-driven filling and sealing machine for filling and further processing of pre-made flat pouches or Doypacks with zip closures. Particularly suited for medium-sized pre-made pouches. Integration of various filling systems is possible (auger doser, scale, volumetric dosing, liquid, paste, and other dosing units). In each production cycle, two pouches are processed, enabling a higher output per minute. By default, 2 dosing units are provided (and required), and accordingly, 2 filling hoppers are installed. The machine can be equipped with two additional dosing units and filling hoppers, allowing either the processing of two different materials or splitting the filling process, thus increasing production speed (relevant, for example, for viscous products). Main components: PLC, touchscreen control monitor (menu available in various languages, such as English, German, etc.), temperature control. Lajdpfev Nlqusx Aaxoh - Specifications: Pouch sizes (min.-max.): L(110-260) x W(90-180) mm; max. filling capacity: 1,200 ml; max. machine cycle rate (idle): 55 cycles/min (equivalent to max. 110 pouches/min); 4.5 kW; 30 m³/h; machine dimensions: (L) 5100 x (W) 980 x (H) 1400 mm; weight: 2000 kg. All product-contact parts are made of stainless steel (SS304). Dosing units and/or additional add-on modules (e.g., discharge conveyor or similar), which may be shown in the machine photos, are optional extras for this listing and are included for illustration purposes only. The machine is suitable for a wide range of composite films. We are happy to check and confirm compatibility based on sample testing. This machine/system is also available in additional versions for various packaging sizes and speeds. Please note that our new prices are often below the typical prices for used equipment. Please feel free to contact us and specify your packaging requirements. Typically, we have 30-50 different new machines in stock and immediately available. For customer-specific machines, we offer very short lead times starting from approx. 3 weeks. All machines are available with full warranty.