Hbm pirkti naudotą (80)

Sąlyga: naujas, Diameter 200 mm Height 105/265 mm Centre height 105 mm Machine weight approx. 41 kg Space requirement approx. 400 x 330 x 310 mm Bledpfxoupxd Rs Admer

Sąlyga: naujas, Drilling capacity in steel (diameter): 40 mm Blsdpfxeupxhis Admsr Throat depth: 350 mm Drilling stroke: 180 mm Spindle taper: MT 4 Table: 560 x 560 mm Column diameter: 140 mm Spindle speed: 50 - 1450 rpm Feed rates: 0.1 - 0.2 mm/rev Total power requirement: 1.5 kW Machine weight approx.: 580 kg Dimensions (L x W x H): 2,270 x 700 x 1,100 mm Column drilling machine equipped with: automatic feed thread cutting function digital depth readout coolant system 2-speed motor spindle guard swivelling table LED lighting

Sąlyga: naujas, Pressing force: 60 kN Oil capacity: 60 ml Operating temperature: 5 - 40°C Weight: 7 kg Dimensions (L x W x H): 430 x 350 x 100 mm Hydraulic crimping tool set 10 dies for 16, 25, 35, 50, 70, 95, 120, 150, 185, and 240 mm² 2 rechargeable batteries, 4.0Ah (Makita compatible) Bedpou Imkkofx Admolr 1 charger Supplied in a storage case

Sąlyga: naujas, Operating pressure: 8 bar Effective delivery rate: 200 / 175 L/min Tank capacity: 50 liters Machine weight: approx. 77 kg Number of cylinders: 4 pcs Motor: 230V / 1.5 kW Dimensions (L x W x H): 580 x 780 x 820 mm Low-noise professional 50-liter compressor Noise level: approx. 40 – 45 dB(A) This compressor is supplied as standard with: Safety valve, pressure regulator, pressure gauge, coupling, and bottom drain valve. Bledpfx Adeu Immxjmjr

Sąlyga: naujas, Swing diameter over bed: 250 mm Swing diameter over cross slide: 140 mm Turning length: 550 mm Spindle speed: 50 - 2,000 rpm Center height: 125 mm Spindle bore: 26 mm Tailstock quill taper: MT 2 Tailstock quill stroke: 65 mm Supply voltage: 230 V Total power requirement: 1.1 kW Machine weight: approx. 0.15 t Space requirements: approx. 1.3 x 0.6 x 1.3 m Bench lathe with base cabinet 2-axis LCD digital readout system Longitudinal feed 125 mm 3-jaw chuck 125 mm 4-jaw chuck Faceplate 4-way tool post Drip tray Hardened bed ways Emergency stop Chuck guard Set of gears Bledpfsupxpmox Admer Suitable tools

Sąlyga: naujas, Dimensions (L x W x H): 780 x 480 x 105 mm Weight: 79.5 kg Number of drawers: 7 pcs. Tool trolley with 7 drawers. The tool trolley is equipped with two fixed and two swivel castors with brakes. Fully lockable tool trolley with integrated lock. Each drawer can be individually locked. All drawers feature quick-release latches and soft-close mechanism. The tool trolley comes equipped with 196 pieces of tools: 3 socket sets: 1/4" (4-14 mm), 3/8" (6-22 mm and Torx E10-E20), 1/2" (8-32 mm). Various screwdriver sets. Bodpfx Adou Imlhemslr Extensions for socket sets, various Allen keys (1-10 mm), and different files. Ratchet combination spanner set (6-22 mm), ring spanner set (6-22 mm). Range of pliers.

Sąlyga: naujas, Dimensions (L x W x H): 780 x 480 x 105 mm Weight: 79.5 kg Number of drawers: 7 pcs. Tool trolley with 7 drawers. The tool trolley is fitted with two standard and two swivel castors with brakes. The integrated lock allows the tool trolley to be fully secured. Drawers can be locked individually per compartment. All drawers are equipped with quick-release locks and soft-close mechanism. The tool trolley is supplied with 196 tool components: - 3 socket sets: 1/4" from 4 - 14 mm, 3/8" from 6 - 22 mm, and Torx from E10 - E20, 1/2" from 8 - 32 mm. Bsdpeu Impgsfx Admslr - Various screwdriver sets. - Extensions for socket sets, various hex keys from 1 - 10 mm, assorted files. - Ratcheting ring spanner set from 6 - 22 mm, ring spanner set from 6 - 22 mm. - Assortment of pliers.

Sąlyga: naujas, Table length 855 mm Table width 500 mm Lifting height 900 mm Minimum lifting height 340 mm Load capacity 500 kg Bsdpfxsupw Uhe Admslr Machine weight approx. 0.085 t Maximum package size 950 x 550 x 450 mm The mobile work and lift table features an easy-to-operate foot pedal for raising the table. The hand pedal allows you to safely lower the table again. There are four rollers underneath the table, two of which are equipped with brakes. The worktable is fitted with a fall protection device for added safety.

Sąlyga: naujas, Swing over bed: 250 mm Swing over cross slide: 140 mm Turning length: 550 mm Spindle speed: 125 - 2000 rpm Centre height: 125 mm Spindle bore: 26 mm Tailstock quill taper: MT 2 Tailstock quill stroke: 65 mm Connection voltage: 230 V Total power requirement: 0.75 kW Machine weight: approx. 0.135 t Space requirement: approx. 1.25 x 0.6 x 0.6 m Speed in 6 steps: 125 - 2000 rpm 3-jaw chuck: 125 mm 4-jaw chuck: 125 mm (independent) Fixed steady rest Travelling steady rest 4-position tool post Chip tray Rear splash guard Spindle guard Hardened bed ways Longitudinal feed with left/right feed reversal Change gear set Bjdpfx Aoupxctjdmslr Associated tools

Sąlyga: naujas, Swing over bed: 280 mm Swing over cross slide: 158 mm Turning length: 600 mm Spindle speed: 45 - 2000 rpm Center height: 140 mm Spindle bore: 26 mm Tailstock quill taper: MT 2 Tailstock quill stroke: 60 mm Metric threads: 0.25 - 2.5 mm Imperial threads: 6 - 96 TPI Connection voltage: 230 V Total power requirement: 0.75 kW Machine weight approx.: 0.16 t Space requirements approx.: 1.26 x 0.58 x 0.60 m Professional metal lathe, geared model - 3-jaw chuck - 4-jaw chuck - Hardened bedways - Faceplate - 4-way tool post - Chuck guard - Fixed and traveling steady rest - Splash guard - Machine lamp Bledevu Hanspfx Admer

Sąlyga: naujas, Swing over bed: 250 mm Swing over cross slide: 140 mm Turning length: 550 mm Spindle speed: 50 - 2000 rpm Centre height: 125 mm Spindle bore: 26 mm Tailstock quill taper: MK 2 Tailstock quill travel: 65 mm Supply voltage: 230 V Total power requirement: 1.1 kW Machine weight approx.: 0.15 t Space requirement approx.: 1.3 x 0.6 x 0.65 m Bench lathe  2-axis LCD digital readout system Longitudinal feed 3-jaw chuck 125 mm 4-jaw chuck 125 mm Face plate 4-way tool post Drip tray Bjdpfx Adsvn U Efemslr Hardened bedways Emergency stop Chuck guard Gear set Appropriate tools Base cabinet is optional!!

Sąlyga: naujas, Dimensions (L x W x H): 790 x 460 x 960 mm Weight: 70 kg Number of drawers: 7 Tool trolley with 7 drawers, equipped with tools - All extendable drawers are ball bearing mounted. Blodpsu Imnpjfx Admjr - The entire workshop trolley is lockable. - Drawer 1: 1/4" premium ratchet. 1/4" universal joint 45 mm. 1/4" extension 100 mm. 1/4" socket set: 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4" long sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8" premium ratchet. 3/8" universal joint 55 mm. 3/8" extension 150 mm. 3/8" socket set: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8" long sockets: 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2" premium ratchet. 1/2" universal joint 75 mm. 1/2" extension 125 mm. 1/2" sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32 mm. 1/2" long sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 mm. - DRAWER 2 Ring, ratchet and socket set consisting of: Sockets: 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30 mm. - DRAWER 3 1/4" bit holders TT8, TT9, TT10, TT20, TT25, TT27, TT30, TT40. 1/4" insert bits T8, T9, T10, T15, T20, T25, T27, T30, T40. 1/4" insert bits HW3, HW4, HW5, HW6, HW7, HW8. 1/4" bit holders S0, S1, S2, S3, S4. 1/4" bit holders V6, V8, V10. 1/4" bit holder H6. 1/4" insert bits FD4, FD5.5, FD6, FD7. 1/4" insert bits PH1, PH2, PH3. 1/4" insert bits PZ0, PZ1, PZ2, PZ3. 1/4" insert bits H2, H4, H5. 8mm insert bits PZ1, PZ2, PZ3, PZ4. 8mm insert bits PH1, PH2, PH3, PH4. 8mm insert bits T20, T27, T30, T35, T40, T45. 8mm insert bits SL4, SL5.5, SL6, SL6.5. 8mm Allen hex bits 7, 8, 10. 1/2" spline bits M18 (POWER) 1/2" insert bits H14, H17, H19, H22, H24. 1/2" spline bits M16. 1/2" spline driver M16, 100 mm long. 1/2" bit holders T80 - 100 mm long. 1/2" pick-up bits M9, M16 - 100 mm long. 1/2" bit holder R9 - 100 mm long. 1/2" pick-up bits R10 - 140 mm long. 1/2" bits T40, T45, T50, T55, T60, T70 - 140 mm long. 1/2" bits H10, H11, H13 - 140 mm long. 1/2" bits M10, M12, M14 - 140 mm long. 1/2" bit holder H5 - 160 mm long. 1/2" pick-up bits H7 - 230 mm long. 1/2" bit holders R7, R8 - 230 mm long. 1/2" bit holder H7 - 230 mm long. 1/2" bit holder T30 - 300 mm long. 1/2" adaptor to 10 mm square drive. - DRAWER 4 Flat screwdrivers: 2.5x50, 3x75, 5x100, 6x100. Phillips screwdrivers: PH 2.5x50, 4x75, 5x75, 6x100, 8x150. Impact screwdrivers flat: 5x75, 6x100, 8x150, 6x38 stubby. Impact screwdrivers cross: 5x75, 6x100, 8x150, 6x38 stubby. - DRAWER 5 T-handle hex keys with ball end: 2 x 100, 2.5 x 100, 3 x 100, 4 x 150, 4.5 x 150, 5 x 150, 6 x 150, 8 x 200, 10 x 200 mm. T-handle hex keys: 2 x 100, 2.5 x 100, 3 x 100, 4 x 150, 4.5 x 150, 5 x 150, 6 x 150, 8 x 200, 10 x 200 mm. - DRAWER 6 Water pump pliers 250 mm. Combination pliers 150 mm. Needle nose pliers 150 mm. Bent nose pliers 150 mm. Side cutters 150 mm. Internal bent circlip pliers 170 mm. External bent circlip pliers 170 mm. External circlip pliers 180 mm. Circlip pliers: 1.5 x 102, 2 x 102, 3 x 114, 4 x 127, 5 x 127, 6 x 140 mm. Claw hammer with fibreglass handle. - DRAWER 7 Nut driver 6 mm. Nut driver 7 mm. Nut driver 8 mm. Nut driver 10 mm. Nut driver 11 mm. Nut driver 12 mm. Nut driver 13 mm. Nut driver 14 mm. Nut driver 15 mm.

Sąlyga: naujas, Table length 820 mm Table width 520 mm Lifting height 730 mm Bsdjupxluopfx Admelr Load capacity 300 kg Min. lifting height 260 mm Machine weight approx. 0.065 t Required space approx. 1.0 x 0.6 x 0.82 m The mobile work and lifting table features an easy-to-use foot pedal for lifting the table. The table can be safely lowered again using the hand pedal. There are four castors located under the table, two of which are equipped with brakes. For additional safety, the worktable is fitted with a fall protection mechanism.

Sąlyga: naujas, Belt width: 150 mm Belt length: 1220 mm Grinding wheel dimensions: 225 mm Bjdpefhk T Hefx Admjlr Work table: 150 x 400 mm Table tiltable up to 90 degrees Table surface: 150 x 130 mm Connection voltage: 230 V Total power requirement: 0.75 kW Machine weight: approx. 35 kg Space requirements: approx. 650 x 360 x 400 mm

Sąlyga: naujas, Drilling capacity in steel (diameter): 40 mm Throat: 275 mm Drill stroke: 120 mm Spindle taper: MT 4 Speed range: 75 - 3200 rpm Table travel (cross): 190 mm Table travel (longitudinal): 490 mm Table clamping surface: 730 x 210 mm Connection voltage: 400 V Drilling feeds: 0.1 - 0.18 - 0.26 mm/rev Total power requirement: 1.1/1.5 kW Machine weight approx.: 0.35 t Space requirement approx.: 0.8 x 0.75 x 1.85 m Drilling/milling machine with: • Drilling capacity 40 mm • Milling capacity 32 mm • Tapping device • Cross table with adjustable guides • Quill feed • Gearbox Bodpfx Adjupw T Domslr

Sąlyga: naujas, Table length 1600 mm Table width 800 mm Lifting height 900 mm Minimum lifting height 310 mm Load capacity 500 kg Machine weight approx. 0.16 t Maximum packing size 1.7 x 0.82 x 0.33 m The mobile work and lift table features an easy-to-use foot pedal for raising the table. The table can be safely lowered again using the hand pedal. There are four castors located under the table, two of which are equipped with brakes. For added safety, the work table is also fitted with a fall protection mechanism. Bedsupxgfepfx Admslr

Sąlyga: naujas, Drilling capacity in steel (diameter): 45 mm Quill stroke: 125 mm Table traverse (cross): 560 mm Table traverse (longitudinal): 230 mm Table clamping surface: 800 x 240 mm Spindle speeds: 75 – 3200 rpm Max. milling cutter diameter: 80 mm Spindle taper: ISO 30 Max. distance between worktable and spindle nose: 460 mm Throat: 230 mm Connection voltage: 400 V Total power requirement: 1.5 kW Machine weight approx.: 580 kg Space requirements approx.: 1.2 x 1.0 x 2.1 m Equipment: All axes with 3-axis digital readout. Quill travel features a separate digital display. Automatic feed on the X-axis and quill. Motorized Z-axis. Tapping device. Coolant system. Machine base frame. Collet set, SK tool holder. Bjdpfeupxrnjx Admelr Additional machine accessories in a box.

Sąlyga: naujas, Dimensions (L x W x H): 780 x 480 x 105 mm Weight: 79.5 kg Number of drawers: 7 pcs. Tool trolley with 7 drawers. The tool trolley is equipped with two fixed and two swivel castors with brake. Fully lockable tool trolley via integrated lock. Drawers can be locked individually. Bljdpfx Adsu Imigomor All drawers feature quick-release and soft-close system. The tool trolley comes equipped with 245 pcs. of tools, including: 3 socket set assortments: 1/4", 3/8", and 1/2". Various screwdriver sets. Socket set extensions, multiple hex keys from 1 - 24 mm, various files. Ratchet combination spanner set. Assorted pliers.

Sąlyga: naujas, Dimensions (L x W x H): 1045 x 5050 x 1010 mm Weight: 100 kg Number of drawers: 7 pcs Workshop trolley filled with 274 quality tools. With 7 drawers and 1 door Sturdy ball bearing guides (double bearings), anti-slip mat in every compartment, Thick rubber top mat, central locking, 4 heavy-duty wheels 125 x 50 mm, Bledpfx Aju Impajdmer of which 2 are swivel castors with brakes, 2 keys included.

Sąlyga: naudotas, Pressure: 75 t Stroke: 250 mm Bodpfxoupxr Uo Admelr Clearance between uprights (lengthwise/sideways): 800 x 215 mm Installation height: 170 - 885 mm Operating pressure: 7.5 - 8.5 bar Machine weight: approx. 0.45 t Dimensions (L x W x H): 1,200 x 800 x 2,100 mm Hydraulic/pneumatic workshop press Cylinder can be shifted laterally Pneumatic foot pedal Winch for table height adjustment 2 press blocks included CE marking

Sąlyga: naujas, Dimensions (L x W x H): 780 x 480 x 105 mm Weight: 79.5 kg Number of drawers: 7 pcs. Tool trolley with 7 drawers. The tool trolley is fitted with two standard and two swivel castors with brakes. The integrated lock allows the tool trolley to be fully secured. Drawers can be locked individually per compartment. All drawers are equipped with quick-release locks and soft-close mechanism. The tool trolley is supplied with 196 tool components: - 3 socket sets: 1/4" from 4 - 14 mm, 3/8" from 6 - 22 mm, and Torx from E10 - E20, 1/2" from 8 - 32 mm. Bsdpfxou Imhco Admjlr - Various screwdriver sets. - Extensions for socket sets, various hex keys from 1 - 10 mm, assorted files. - Ratcheting ring spanner set from 6 - 22 mm, ring spanner set from 6 - 22 mm. - Assortment of pliers.

Sąlyga: naujas, Swing over bed: 290 mm Swing over cross slide: 170 mm Turning length: 750 mm Spindle speed: 75 - 2000 rpm Centre height: 145 mm Spindle bore: 38 mm Tailstock quill taper: MT 3 Tailstock quill travel: 80 mm Supply voltage: 230 V Total power requirement: 1.5 kW Machine weight approx.: 0.34 t Space requirement approx.: 1.3 x 0.75 x 0.7 m Longitudinal and cross feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. Faceplate. 4-way toolpost with 4 tool holders. 2 steady rests. Machine lamp. Drip tray. Hardened bedways. Emergency stop. Chuck guard. Set of gears. Blsdpfx Adovxw Htjmer Machine tools.

Sąlyga: naujas, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Drilling stroke: 120 mm Spindle taper: MT 4 Speed range: 75 – 3200 rpm Table cross travel: 190 mm Table longitudinal travel: 490 mm Table clamping surface: 700 x 210 mm Connection voltage: 400 V Maximum milling cutter diameter: 80 mm Total power requirement: 1.1/1.5 kW Machine weight approx.: 0.35 t Space requirement approx.: 0.8 x 0.75 x 1.85 m Drill/milling machine equipped with: • Thread cutting device Bledpfx Adeupw Uzjmjr • Cross table with adjustable guides • Quill feed • Gearbox • SK 40 spindle taper

Sąlyga: naujas, Dimensions (L x W x H): 745 x 525 x 915 mm Weight: 93.5 kg Number of drawers: 7 pcs. Workshop trolley filled with 283 quality tools. Fixed ball bearing slides (double bearings), anti-slip mat in each compartment, thick rubber top mat, central locking, 4 heavy-duty wheels 125 x 50 mm, of which 2 are swivel castors with brakes, 2 keys. The tool trolley is equipped with 283 pieces of tools, including: 3 socket sets: 1/4" from 4 - 14mm, 3/8" from 9 - 22mm and Torx from 8 - E20, 1/2" from 8 - 32mm. 3 sets of ratcheting ring spanner sets from 8 - 19mm, ring spanner set from 6 - 32mm. Various screwdriver sets, bit sets for socket sets, Blodpfxju Imk Ds Admjr various Allen keys and much more. See pictures.

Sąlyga: naujas, Table length: 910 mm Table width: 500 mm Table height: 350 – 1300 mm Bledpfx Ajupxlhodmsr Load capacity: 350 kg Minimum lifting height: 950 mm Maximum lifting height: 1300 mm Machine weight: approx. 110 kg Space requirement: approx. 100 x 550 x 400 mm The mobile work and lifting table is equipped with an easy-to-use foot pedal for raising the table. The table can be safely lowered using the hand pedal. There are four castors located underneath the table, two of which are fitted with brakes. The work table is equipped with a fall protection safety feature for added security.