Gkt 60 pirkti naudotą (21 373)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, veikimo valandos: 28 748 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 570 kg, bendras svoris: 20 000 kg, alyvos bako talpa: 600 l, galia: 37 kW (50,31 AG), tūrio srautas: 350 m³/val, Technical Data of the Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of Manufacture: 2015 Total Operating Hours: 30,143 hours (as of July 2025) Actual Pump Runtime: 6,527 hours (as of July 2025) Number of Bales Pressed: 115,193 bales (as of July 2025) Pre-Press Force: 25 t Main Press Force: 60 t Specific Press Force: 73 N/cm² Feed Opening Dimensions: 1,500 x 1,100 mm Filling Volume per Press Cycle: 2.7 m³ Theoretical Throughput: 800 m³/hour Throughput Under Operating Conditions: 350 m³/hour Bale Dimensions: 1,100 x 750 mm Drive Power: 37 kW Tying System: 5-fold vertical, fully automatic Throughput at a Bulk Density of 50 kg/m³: 11 to 14 t/hour Bale Weights: 420 to 570 kg, depending on material Hydraulic Oil Tank Volume: 600 L Baler Dimensions Assembled with Hopper: 10,100 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (excluding press): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine Weight (Press): approx. 20 t Condition of the Baler: The baler has been partially overhauled in our workshop and subsequently tested in manual and automatic operation. The following overhaul work was carried out: - Machine cleaned, partially de-rusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four press ram rollers disassembled and renewed - Grease cartridges of the automatic roller lubrication system replaced - Guide rails on the baler floor in the pressing chamber cut out - Floor reinforced with welded plates - New HARDOX guide rails welded in - Wire station and deflection pulleys for lower wire cleaned and serviced - Guide rails from the floor of the press channel cut out - New HARDOX guide rails welded in - Both side walls of the press channel disassembled and de-rusted - Worn side wall plates removed - Complete side walls fitted and welded with new wear plates - Main hydraulic cylinder disassembled and overhauled for inspection - Piston rod replaced, cylinder tube honed - All sealing sets replaced, pressure test performed - Vertical needle system for tying disassembled, cleaned, wire deflection pulleys serviced and maintained - Chain cleaned, greased, tension readjusted Fpsdpovn Tg Isfx Af Asg - Drillomat cleaned, wire cutter, drilling shafts and drilling fingers checked, retorqued, and serviced - Machine inspected, general maintenance work carried out, and baler tested in both manual and automatic operation Remarks: The baler is sold without a conveyor belt and without wire stations. Inspection is possible by prior arrangement. We assume no liability for the technical specifications or any errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, veikimo valandos: 32 169 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 320 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 750 kg, bendras svoris: 22 000 kg, alyvos bako talpa: 900 l, For sale is a complete baling press system consisting of conveyor technology, baler (partially overhauled and tested), and wire stations. Technical Data of the Press: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed opening dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying system: 5-fold vertical Throughput capacity at bulk density: 30 kg/m³ approx. 5.5 t/h 50 kg/m³ approx. 10 t/h 100 kg/m³ approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC control: Telemecanique TSX Micro Machine weight (press): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with de-flaker (wirbulator) 1 maintenance platform with access ladder Fpodpfx Afoviwdme Aog 2 wire stations with redirect pulleys for 10 wire coil holders (without wire) The following repair and overhaul work has been carried out: Hydraulic oil tank completely drained, cleaned, and refilled with new oil Oil and air filters replaced Partial resealing of hydraulic block Hydraulic hose at hydraulic block replaced Wire mark grooves at floor entry points welded and smoothed Tying system cleaned and serviced Electrical system overhauled, door flap contact switches partially replaced De-flaker (wirbulator) repaired General maintenance performed, lubricated Machine tested during operation without material, in both manual and automatic modes – see function video Notes: The equipment has already been completely dismantled, stored, and is ready for immediate loading. Documentation (manual, CE, electric/hydraulic wiring diagrams) is available. Inspection possible by appointment. We do not assume liability for technical specifications or possible errors.

Gamybos metai: 1982, būklė: paruoštas naudoti (naudotas), Parduodama universali CNC įstrižo pagrindo tekinimo staklė Traub. Įrankių vietų skaičius: 12, įrankių laikiklis: VDI40, tekinimo skersmuo: 180 mm, didžiausias apsisukimo skersmuo: 450 mm, maksimali tekinimo ilgis: 490 mm, strypo pralaidumas: 60 mm, X/Z eiga: 160 mm/490 mm, greita eiga: 15 m/min, padavimas: 10 m/min, staklių matmenys X/Y/Z: apie 3100 mm/2000 mm/1800 mm, svoris: apie 4250 kg, valdymas: Traub System TX-8. Galima apžiūra vietoje. Fpedjy I Adbspfx Af Aeg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, veikimo valandos: 11 360 h, keliamoji galia: 6 000 kg, kėlimo aukštis: 4 000 mm, apkrovos centras: 700 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 2 910 mm, galia: 62,5 kW (84,98 AG), variklių gamintojas: Perkins 1104D-44T/62,5 KW, pavaros tipas: hidrostatinis, šakių ilgis: 1 400 mm, Priekinės padangos tipas: pneumatinės padangos (užpildytos oru), priekinės padangos dydis: 315/70 R15, galinės padangos tipas: pneumatinės padangos (užpildytos oru), galinės padangos dydis: 315/70 R15, bendras plotis: 2 200 mm, Įranga: apšvietimas, Šildymas, suodžių filtras, pilnai uždara kabina, vairavimo svirtis (joystick), stiklo valytuvas, pilnai uždara kabina su ritininiais guoliais montuotomis durimis, tonuoti stiklai, pilna apšvietimo instaliacija, du priekiniai žibintai su apsauginiu stiklu, papildomi žibintai ant stiebo bei stogo ir galiniai žibintai. Platformos plotis: 1 400 mm, platformos aukštis: 1 030 mm, rėmo išpjova: 1 500 mm. Įrenginys yra važiuojantis ir paruoštas darbui. Fjdoy Nl U Ejpfx Af Ajpg

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, Sertifikuota DGUV iki: 05/2027, bendras ilgis: 640 mm, bendras plotis: 735 mm, bendras aukštis: 1 110 mm, bakelio talpa: 60 l, įėjimo dažnis: 50 Hz, tuščias svoris: 130 kg, bendras svoris: 130 kg, įvesties srovės tipas: trifazis, galia: 6,5 kW (8,84 AG), Universalus Kemper maišytuvas Modelis: Orion 60 Maišytuvas su nerūdijančio plieno dubeniu Talpa apie 60 litrų Su 180° pakreipimo funkcija Našumas apie 10–180 litrų/val. Tik pas mus pagal DGUV V3 patikrinta Jungtis: 400V, 16A-CEE kištukas Fpjdpfx Afjt Em Ayj Aeg Naudotas įrenginys Daugiau maišytuvų sandėlyje!

Būklė: naudotas, Gamybos metai: 2001, veikimo valandos: 38 850 h, spaudimo jėga: 25 kN, darbinio tūrio: 20 cm³, įpurškimo slėgis: 2 500 juosta, bendras svoris: 1 800 kg, sraigtinio konvejerio skersmuo: 18 mm, Pristatymo sąlygos: iš vietos Pristatymo laikas: pagal susitarimą Apmokėjimo sąlygos: 100% apmokėjimas prieš perimant įrenginį, grynoji suma Fpodpfx Afoyt R S Aj Asg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2000, veikimo valandos: 9 894 h, keliamoji galia: 13 600 kg, kėlimo aukštis: 5 300 mm, laisvas kėlimas: 2 650 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 4 150 mm, šakių laikiklio plotis: 2 450 mm, šakių ilgis: 1 500 mm, tuščias svoris: 19 500 kg, bendras ilgis: 4 660 mm, pavaros tipas: Diesel, statybos plotis: 2 550 mm, Diesel forklift Load center: 600 mm Fork width: 200 mm Fork thickness: 70 mm Mast type: Duplex Condition: Operational and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 12.00-20 Rear tires type: Superelastic Fedpfxjxxdyvj Af Aspg Rear tires size: 12.00-20 Description: In addition to this Svetruck model, we have approximately 200 other heavy-duty forklifts, compact forklifts, forklift trucks, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing under favorable conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this 13,6 60-30 model. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to sell your vehicle for you on consignment. Sideshift, fork positioner, Heater, full cabin, full free lift,

Būklė: naudotas, Lėtaeigė išankstinio smulkinimo mašina gumai, plastikui, kabeliams, kompozitinėms medžiagoms Labai tinkama medžiagų junginių atskyrimui, pvz., padangos, senos laidai Su integruota saugos kirpimo sankaba apsaugai nuo pašalinių objektų Rotorius: 600 mm skersmens, 1450 mm darbo plotis Uždaro tipo rotorius su paslinktais segmentiniais peiliais, pritvirtintais kasetėse 24 rotoriaus peiliai, 2 statoriaus peilių eilės Fpjdpfoy Ic Imex Af Ajg Atverčiamas sietas, skylės pagal pasirinkimą Su prispaudimo įrenginiu (švytuoklės svirtis) Variklio galia: 90–200 kW

Būklė: naudotas, HERBOLD Granulator Type SMS 60/100 Heavy-duty design Feed opening: 700 x 1000 mm Open rotor: 600 mm diameter x 980 mm width (optionally as open 3- or 7-knife rotor) Fpjdpey Icquefx Af Aeg Drive motor: 110 kW Hydraulic tilting device with electric winch

Būklė: naudotas, Lėtaeigė išankstinio smulkinimo mašina gumai, plastikui, kabeliams, kompozitinėms medžiagoms Labai tinkama medžiagų junginių atskyrimui, pvz., padangos, senos laidai Su integruota saugos kirpimo sankaba apsaugai nuo pašalinių objektų Fjdsy Icf Sepfx Af Ajpg Rotorius: 600 mm skersmens, 1450 mm darbo plotis Uždaro tipo rotorius su paslinktais segmentiniais peiliais, pritvirtintais kasetėse 24 rotoriaus peiliai, 2 statoriaus peilių eilės Atverčiamas sietas, skylės pagal pasirinkimą Su prispaudimo įrenginiu (švytuoklės svirtis) Variklio galia: 90–200 kW

Gamybos metai: 2014, būklė: reikia remonto (naudotas), Funkcionalumas: neveikiantis, mašinos/transporto priemonės numeris: M755, Techninės charakteristikos: # Darbinė erdvė: 1.130 × 860 × 1.080 mm (P × A × G) # Talpos bakas: 420 l # Mechaninis svoris: 1.900 kg Elektros įranga # Maitinimas: 400 VAC, 3 fazės, 50 Hz # Generatorius: nuo 3 kW iki >100 kW (pulsinė technologija) Matmenys # Mašinos matmenys (I×P×A): 2.100 × 2.000 × 2.600 mm Komplektacijoje: # Pagrindinė mašina, elektrolito filtravimo sistema, pramoninis aušintuvas, elektrolito apdorojimas (CR-6 šalinimas) Dozavimo mazgas elektrolitui Fpjdpfx Asxwmikof Asg # Valdymo sistema: Siemens S7-300 su Visual WIN CC/Vartotojui draugiška sąsaja: lietimui jautrus ekranas su integruotu įrankių meniu # Komunikacijos modulis įrankių poreikiams: iki 8 signalų # Saugos įranga: šviesos užuolaida arba stumdomos durys operatoriaus apsaugai # Procesų stebėjimas: realaus laiko duomenų stebėsena ir trumpo jungimo aptikimas Mašinos būsena: NEVEIKIA # Saugos šviesos užtvara # Festo komunikacijos modulis # Filtravimo sistemos siurblys

Būklė: naudotas, Infeed: approx. 600 x 580 mm Fpjdpfx Ajy Ibivsf Aog Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor knives: 4

Būklė: naujas, Slėgis: 60 t Stovo pravažiavimas: 900 x 300 mm Variklio galia: 3 kW Greitis: 8 Greitis: 13 Matmenys (Ilgis x Plotis x Aukštis): 1500 x 850 x 2450 mm Svoris apie: 700 kg Fpodpov Akw Hjfx Af Asg Kėlimas: 300 mm Standartinė komplektacija: Aukštos kokybės hidraulinis presas, gali būti valdomas tiek rankiniu, tiek variklio būdu. Cilindrus galima šoniniu būdu perkelti. CE sertifikatas Slėgio reguliavimas 1 metų garantija Manometras Naudotojo vadovas (rankinis) Stovo tarpas: 900 x 300 mm

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, veikimo valandos: 30 917 h, keliamoji galia: 6 000 kg, kėlimo aukštis: 4 650 mm, apkrovos centras: 600 mm, kuro tipas: dyzelinas, stiebo tipas: teleskopinis, pavaros tipas: hidrostatinis, bendras svoris: 10 000 kg, tuščias svoris: 10 000 kg, spalva: raudona, Įranga: apšvietimas, galvos apsauga, griebtuvo hidraulika, kabina, oro kondicionavimas, padėklų šakės, spaustukas, įtraukiama šakutė, šakės prailginimas, šoninis poslinkis, For sale: Linde H60D-03 forklift truck, year 2018 A reliable, robust machine with a lifting capacity of 6,000 kg, powered by a Deutz TCD 4.1 L4 diesel engine. This forklift is in excellent technical condition, has been regularly serviced, and comes from its first owner. Ready for immediate operation, equipped with a triple fork system featuring side shift (outer forks – individual side shift, middle fork fixed, common side shift for all three). The forklift is from its original and only owner. The forklift has been serviced exclusively at the official LINDE Service in the Czech Republic, with a complete service log available from the date of purchase through 16.05.2025. The technical condition corresponds to about 10,000 operating hours, not 30,000. Many key systems have been replaced or refurbished over the past 7 years, including regularly cleaned DPF filters and annual inspections for micro-leaks or similar issues. The price includes a full set of documents for registration. If required, we also arrange UDT (Office of Technical Inspection) certification quickly and for an extra charge. We offer all forms of payment: – Leasing, loan, cash, and bank transfer. Fpedpfx Aoxu Ii Tef Asg If you pay by cash or bank transfer, you can drive the machine away immediately. Additionally, we offer insurance services – we will find the lowest premium for any vehicle – TRY US! We also deliver paid vehicles and trucks to any address across Europe. For more information about our services, please contact our sales team. Technical data: – Model: Linde H60D-03 (series 396-03) – Year of manufacture: 2018 – Rated capacity: 6,000 kg – Load centre: 600 mm – Engine: Deutz TCD 4.1 L4, 4-cylinder diesel, 85 kW – Drive: hydrostatic – Travel speed: up to 23 km/h – Lifting height: approx. 4,650 mm (duplex mast with free lift) – Mast height (collapsed): approx. 2,650 mm – Turning radius: approx. 3,100 mm – Unladen weight: approx. 10 t – Tyres: pneumatic, in good condition Equipment: – Triple fork system (ideal for longer pallets or non-standard loads) – Side shift – Cabin with heating – 3rd and 4th hydraulic section – Work and road lights, mirrors, reversing signals – Comfortable operator’s seat with suspension – Double-pedal drive system (ergonomic Linde controls) Technical condition: – Regularly serviced at authorized Linde service centre – Complete service history available – All maintenance performed on schedule, forklift in continuous operation – No play, leaks or damage – ready for immediate use – First owner, used in a single production plant The price is net and applies to export and companies. Significant discount possible for private customers – Please contact us directly by phone for your best price :)

Būklė: beveik kaip naujas (parodų įrenginys), Description: Fedpsvwflnofx Af Ajpg Vacomat 140/160 XPe - The mobile dust extractor Vacomat 140/160 XPe is our smallest model and is perfectly suited for extracting dust from individual machines. Air volumes of up to 1,593 m³/h can be conveyed with this negative-pressure extraction system, for example for dust removal from panel saws, jointers, or thickness planers. - In the standard version, extraction is manually started at the push of a button. Upon request, an automatic start of the fan can be installed, which activates when the connected processing machine is switched on. This ensures that extraction is not forgotten or run unnecessarily in idle. - The dust/chip mixture is discharged into a dust-tight chip collection container (240 l) lined with a plastic bag. A vacuum duct holds the plastic liner securely in the collection bin. Inspection windows make it easy to monitor the fill level. - The mobile dust extractor Vacomat 140/160 XPe independently monitors its extraction performance via a pressure sensor, ensuring maximum operational safety. Filter Cleaning - In the Vacomat 140/160 XPe, an integrated control cabinet triggers the electro-mechanical cleaning of the filter hoses via a vibration motor. Activation is managed by the status of the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaker automatically starts. No compressed air connection or compressor is required for this filter regeneration mechanism, which results in a significant reduction in noise during cleaning. - Optional and highly recommended for very high levels of fine dust, an efficient pulse-jet cleaning system (XPe-D) is available (NOTE: machine height increases by +100 mm and length by +280 mm). Pulse-jet filter cleaning using a compressed air tank occurs offline, after extraction operation. SCHUKOCONE FILTER - The mobile extractor Vacomat 140/160 XPe is delivered as standard with patented SchukoCone® filter hoses. - The SchukoCone® filter is a successful combination of an externally filtered hose with an internally filtered cone. This innovative filter design provides approx. 60% more filter area while requiring less space. - SchukoCone® filter hoses truly show their advantages especially for fine dust, where a large filter area and low surface load are critical. - Lower filter surface load leads to longer filter service life. With lower filter resistance, less fan power—and thus less energy—is required. ASSEMBLY & SCOPE OF DELIVERY - The mobile dust extractors of the type Vacomat 140/160 XPe are delivered pre-assembled and ready to plug in (16 A three-phase, with 6.0 m cable) on a disposable pallet (included). A chip collection bag (size V) is also included in the delivery. - The Vacomat 140/160 XPe must be electrically connected to the machine to be extracted so that the automatic regeneration of the filter hoses is triggered after switching off the processing machine. An electrical contractor can assist with this. The supplied control cabinet with integrated phase inverter is prepared for connection to a potential-free contact and three current transformer coils (coils not included). - With a flexible hose or fixed pipe...

Būklė: naudotas, mašinos/transporto priemonės numeris: 516323D00656, Gamybos metai: 2013, veikimo valandos: 4 718 h, keliamoji galia: 3 000 kg, galia: 15 kW (20,39 AG), akumuliatoriaus įtampa: 80 V, tuščias svoris: 3 389 kg, Šis STILL elektrinis krautuvas, tipas: RX 60-30, parduodamas mūsų pramoniniame / mašinų aukcione ZINK NFZ GmbH & Co. KG įmonės inventoriui, internetu. Fpodpfxjy Hqrdo Af Aeg

Būklė: naudotas, tuščias svoris: 8 964 kg, didžiausias leistinas svoris: 27 036 kg, bendras svoris: 36 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 06/2016, krovimo vietos ilgis: 13 320 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 2 650 mm, krovinio erdvės tūris: 87 m³, bendras ilgis: 13 320 mm, pakaba: oras, padangos dydis: 385/65 22,5, padang padangų: 40 procentas, spalva: smėlio spalvos, Gamybos metai: 2016, priekinės padangos dydis: 385/65 22,5, galinės padangos dydis: 385/65 22,5, vairuotojo kabina: dieninė kabina, emisijos klasė: nėra, Įranga: ABS, aušinimo blokas, sunkvežimio registracija,

Būklė: naudotas, tuščias svoris: 8 964 kg, didžiausias leistinas svoris: 27 036 kg, bendras svoris: 36 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 06/2016, krovimo vietos ilgis: 13 320 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 2 650 mm, krovinio erdvės tūris: 87 m³, bendras ilgis: 13 320 mm, pakaba: oras, padangos dydis: 385/65 22,5, padang padangų: 50 procentas, spalva: smėlio spalvos, Gamybos metai: 2016, priekinės padangos dydis: 385/65 22,5, galinės padangos dydis: 385/65 22,5, vairuotojo kabina: dieninė kabina, emisijos klasė: nėra, Įranga: ABS, aušinimo blokas, sunkvežimio registracija,

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 516305X00366, Gamybos metai: 2020, veikimo valandos: 8 560 h, keliamoji galia: 3 000 kg, galia: 17 kW (23,11 AG), šakių ilgis: 2 400 mm, bendras svoris: 4 680 kg, Nėra minimalios kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! TECHNINĖ INFORMACIJA Keliamoji galia: 3 000 kg Šakių matmenys: 2 400 mm x 120 mm x 50 mm ĮRENGINIO DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 4 813 x 1 200 x 2 775 mm Svoris su baterija: 4 680 kg Pavaros galia: 17 kW Darbo valandos: apie 8 560 h ĮRANGA Kroviklis Fjdpfx Aoy Rrx Tjf Aopg Pastaba: Galinis dangtis šiek tiek apgadintas.

Gamybos metai: 2023, būklė: naujas, The SEMIX Mobil 60 S4 is equipped with concrete mixers with a capacity of 1500/1000 liters, which can be single-shaft, twin-shaft, or mobile types. SEMIX mobile concrete mixers use NiHard4 or Hardox 450 wear-resistant components, depending on the silicon ratio in the concrete mix formula. Fedpfjgaw T Hjx Af Aopg Aggregate bins can be charged using wheeled loaders via a single ramp. Aggregate is weighed on a weighing conveyor that transfers the material to a belt conveyor. The plant features two separate conveyors, ensuring precise weighing and output for higher concrete production rates. All SEMIX concrete batching plants are controlled by a SCADA system integrated with a Schneider PLC. Users can monitor all input materials and integrate CRM systems. The SEMIX engineering team can access the automation system remotely to provide online service and support.

Gamybos metai: 2023, būklė: naujas, Compact SEMIX concrete batching plants are designed for limited spaces and easy overseas transportation. The SEMIX Kompakt 60 fits into a double container and can be fully assembled within 3 days. The SEMIX Kompakt 60 is equipped with concrete mixers with a capacity of 1500/1000 liters, available as single-shaft or mobile mixers. SEMIX mobile concrete mixers utilize NiHard4 or Hardox 450 wear components, depending on the silicon content of the concrete mix design. All SEMIX aggregate storage bins are trapezoidal for exceptional strength. The robust steel structure ensures long-term performance. Aggregates are weighed on a weighing conveyor, which transfers them to the conveying mechanism. Fpedpfoga D Hzjx Af Aog SEMIX compact concrete batching plants offer a variety of aggregate conveying mechanisms. Even in compact batching plants, users can choose between a skip hoist or belt conveyor for aggregate transport. All SEMIX concrete batching plants are controlled by a SCADA system with integrated Schneider PLC. Users can monitor all used materials and integrate CRM systems. The SEMIX engineering team can provide online support by remotely accessing the automation system.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2007, veikimo valandos: 12 000 h, keliamoji galia: 5 000 kg, kėlimo aukštis: 4 200 mm, kuro tipas: elektrinis, stiebo tipas: dupleksas, statybinis aukštis: 2 850 mm, pavaros tipas: automatinis, akumuliatoriaus modelis: 6Pzs 930, akumuliatoriaus įtampa: 80 V, Įranga: CE žymėjimas, kabina, padėklų šakės, STILL RX60-50 KELEMO SVORIS 5000 KG ŠONINIS POSLINKIS KONSTRUKCIJOS AUKŠTIS 2850 mm KĖLIMO AUKŠTIS 4200 mm BATERIJA IŠ 2020 M., 80% Fpedpjy Atkbofx Af Asg ŠILDOMA KABINA MOTO VALANDOS 12 220

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, kuro tipas: dyzelinas, Gamybos metai: 2023, veikimo valandos: 181 h, statybinis aukštis: 2 310 mm, pavaros tipas: Diesel, keliamoji galia: 2 190 kg, statybos plotis: 1 230 mm, Yard loader Mast type: None Technical condition: very good Front tyres type: Pneumatic Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres condition: 80 - 100% Fodovgiazspfx Af Aepg Rear work light, front work light, heater, particulate filter, full cab, CE certificate, safety light. Image for illustrative purposes only. Quick coupler. Pump type: gear pump. Hydraulic flow rate – hydraulic pressure: 58.3 l/210 bar. System pressure drive: 420 bar.

Būklė: naudotas, Gamybos metai: 2019, keliamoji galia: 8 000 kg, kėlimo aukštis: 4 060 mm, - Operation: Seated vehicle - Load capacity: 8,000 kg - Load center distance: 900 mm - Axle load with load front/rear kg: 21,306/2,124 - Axle load without load front/rear kg: 7,097/8,333 - Track width front/rear mm: 1,561/1,432 - Mast/Garriage tilt forward/backward α/β: 5/8° - Mast height retracted: 2,710 mm - Coupling height mm: 520/670 - Fork carriage ISO 2328, class/type A, B ISO IV A - Aisle width with pallet 1000 x 1200 crosswise mm: 4,999 - Aisle width with pallet 800 x 1200 lengthwise mm: 5,199 - Turning radius mm: 3,049 - Minimum pivot point distance mm: 877 - Travel speed with/without load km/h: 14/17 // 18/20 4 - Lift speed with/without load m/s: 0.28/0.37 // 0.36/0.48 - Lowering speed with/without load m/s: 0.53/0.42 - Drawbar pull with/without load N: 27,997/28,295 - Maximum drawbar pull with/without load N: 44,000 - Gradeability with/without load %: 15.5/22.5 - Maximum gradeability with/without load %: 16.0/23.0 - Acceleration time (15 m) with/without load s: 7.9/6.8//6.9/6.1 - Service brake: Mechanical/hydraulic - Battery according to DIN 43531/35/36 A, B, C, no, DIN 43536 A - Battery voltage V: 80 - Battery capacity K5 Ah: 1,120 (-1,240) // 1,085 - Energy consumption 45 VDI working cycles/hour kWh/h: 17.7 - Handling performance t/h: 456 // 476 - Energy consumption at handling performance kWh/h: 17.2 // 21.9 - Working pressure for attachments bar: 250 - Oil flow for attachments l/min: 60 - Sound pressure level LpAZ (operator’s position) dB(A): 2 Fpjdpfey E Ui Dex Af Aeg

Būklė: naudotas, Gamybos metai: 2023, keliamoji galia: 8 000 kg, kėlimo aukštis: 6 570 mm, šakių ilgis: 1 800 mm, bendras ilgis: 6 150 mm, - Operation: Seated vehicle - Load capacity: 8,000 kg - Load center distance: 900 mm - Axle load with load front/rear kg: 21,306/2,124 - Axle load without load front/rear kg: 7,097/8,333 - Track width front/rear mm: 1,561/1,432 - Mast/Garriage tilt forward/backward α/β: 5/8° - Mast height retracted: 2,710 mm Fpsdpfx Afoy E Uiqs Ajg - Coupling height mm: 520/670 - Fork carriage ISO 2328, class/type A, B ISO IV A - Aisle width with pallet 1000 x 1200 crosswise mm: 4,999 - Aisle width with pallet 800 x 1200 lengthwise mm: 5,199 - Turning radius mm: 3,049 - Minimum pivot point distance mm: 877 - Travel speed with/without load km/h: 14/17 // 18/20 4 - Lift speed with/without load m/s: 0.28/0.37 // 0.36/0.48 - Lowering speed with/without load m/s: 0.53/0.42 - Drawbar pull with/without load N: 27,997/28,295 - Maximum drawbar pull with/without load N: 44,000 - Gradeability with/without load %: 15.5/22.5 - Maximum gradeability with/without load %: 16.0/23.0 - Acceleration time (15 m) with/without load s: 7.9/6.8//6.9/6.1 - Service brake: Mechanical/hydraulic - Battery according to DIN 43531/35/36 A, B, C, no, DIN 43536 A - Battery voltage V: 80 - Battery capacity K5 Ah: 1,120 (-1,240) // 1,085 - Energy consumption 45 VDI working cycles/hour kWh/h: 17.7 - Handling performance t/h: 456 // 476 - Energy consumption at handling performance kWh/h: 17.2 // 21.9 - Working pressure for attachments bar: 250 - Oil flow for attachments l/min: 60 - Sound pressure level LpAZ (operator’s position) dB(A): 2