Galvanotechnik Leipzig pirkti naudotą (611)

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2300 x 1800 x 1400 mm Weight: 2300 kg Total power requirement: 37 kW Itodpfxsvz Hrqo Abkor Multiblade Saw MBS-1300-45 - Working width min./max.: 200 / 1220 mm - Cutting height min./max.: 5 / 45 mm - Min. workpiece length: 600 mm - Spindle diameter: 85 mm - Saw spindle speed: 2,600 rpm - Saw blade diameter: 255 mm - Max. 30 saw blades on spindle - Motor power: 37.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 2.2 kW - Total connected load: 39.2 kW - Feed speed: 0–12 m/min - Feed rollers: 7 pairs (14 pcs) - Extraction port: 150 mm - Dimensions (L = 2300, W = 1800, H = 1400 mm) - Weight: 2300 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm Itsdpfx Aovz Hq Tebkor - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm Itsdpfevz Hq Hsx Abker - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. Iedpovz Hqyofx Abkjtr - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm Isdpfx Abovz Hqtjketr - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm Iedpfxevz Hqme Abkstr - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h Itedjvz Hqgepfx Abkjr - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 560 x 445 mm Weight: 40 kg Total Power Requirement: 1 kW CO2 Cutting and Engraving Laser LASERMAX 3021 - Working area X, Y: 300 x 210 mm - Worktable with electric height adjustment - CO2 laser power: 40 W - Engraving speed: 0–36,000 mm/min - Cutting speed: 0–30,000 mm/min - Repeatability / Resolution: ±0.05 mm / 1000 dpi - Minimum font size: 3 mm - Linear guides on X and Y axes - X, Y drive via high-precision belt drive and stepper motors - Control via LCD display - Software: RDWorks (from Windows 7) - USB interface with 128 MB RAM - Water cooling (submersible pump DK 4000) ensures stable laser system operation and long laser tube lifespan Iodpfx Aovz Hqasbkotr - Freely definable origin on the work area for flexible operation and easy positioning - Power consumption max. 1000 W - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (AutoCAD, CorelDraw) - Electrical connection: 230 V, 50 Hz - Our laser machines come with a 1-year warranty and a 10-month warranty on the laser tube - Cutting depth depends on material (Acrylic 6 mm, Wood 4 mm, MDF 2 mm) - Suitable for wood, ceramics, glass, and plastics - Including extraction fan - Including compressor - Including submersible pump - Including electric worktable height adjustment - Dimensions: L = 800 mm, W = 560 mm, H = 445 mm - Weight: 40 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 700 x 1050 mm Weight: 120 kg Total Power Requirement: 1.2 kW Laser Fume Extraction Unit LA-1500-IQ Suitable for filtering laser gases and dusts such as acrylic, plastic, wood, and more; also usable for air purification in soldering, laboratory applications, etc. The capacity is designed for a working area of 1400 x 1000 mm. Function: The LCD display shows airflow and air pressure. The airflow is adjustable. A remote control for airflow adjustment is included. The machine features a warning system to indicate when a filter is blocked and needs replacement. The filtration of laser gases and dust occurs in multiple stages. Two pre-filter stages remove coarse particles and simultaneously protect subsequent fine dust filters from rapid saturation. The activated carbon filter purifies the air at a molecular level, ensuring clean breathing air. Ijdpfxsvz Hp Nj Abkstr - Extraction capacity: 1500 m³/h - Filtration efficiency: > 99.9% - 2 fans: 2 x 600 W = 1200 W - Air pressure: 3800 Pa - Noise level: 60 dBA - Voltage: 230 V / 50 Hz - Primary filter (coarse filter): 430 x 430 x 4 mm for particles ≥ 5 microns - Medium filter: 430 x 430 x 300 mm for particles ≥ 1 micron - HEPA filter: 430 x 430 x 50 mm for particles ≥ 0.01 microns and fumes - Gas filter: 430 x 430 x 150 mm for odor and toxic gases - Hose connection diameter: 150 mm - Dimensions: L = 600 mm, W = 700 mm, H = 1050 mm - Weight: 120 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (Length/Width/Height): 2040 x 1495 x 1025 mm Weight: 540 kg Total Power Requirement: 2.3 kW CO2 Cutting and Engraving Laser LASERMAX NOVA ELITE 1490-150W - Certified to laser class 1 in closed operation - Working area X, Y: 1400 x 900 mm - Electrically adjustable worktable height up to 200 mm - CO2 laser peak power: 150 W - Maximum speed: 1200 mm/s - Maximum engraving speed: 800 mm/s - Repeatability: ±0.02 mm - Minimum font size: 1 mm - Linear guides on the X and Y axes - Material support: Aluminum slats and honeycomb table included - X, Y drive: High-precision belt drive with stepper motors - Operating systems: from Windows 7 upwards - Control via LCD display - Ruida RD6445 control unit with 128 MB RAM - Interfaces: USB, WIFI, RJ45 - Red positioning laser for reduced setup times - Freely definable origin (zero point) on the working surface for flexible operation and easy positioning - Integrated autofocus for fast setup of working height - Power consumption: 2300 W - Compatible file formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (AutoCAD, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty - Cutting depth depends on material (cutting capacity in acrylic approx. 15 mm) - Standard lens focus: 63.5 mm (2.5”), optional focus: 50.8 mm (2.0”) / 101.6 mm (4.0”) - Openings at the front and rear for processing longer workpieces - Active water cooling integrated for stable operation of the laser system and long service life of the laser tube - Integrated extraction fan, 500 W - Integrated compressor, 135 W - Includes castors with brakes and leveling feet - Suitable for wood, ceramics, glass, and plastics - Unit dimensions: L = 1920, W = 1600, H = 1100 mm - Packaging dimensions: L = 2040, W = 1495, H = 1025 mm - Net weight: 540 kg - Shipping weight: 570 kg Iedpfx Abjvz Hpvekjtr Option: - Rotary device with rollers for engraving cylindrical and conical objects - Rotary device with 3-jaw chuck for engraving cylindrical objects

Sąlyga: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis) 1230x490x2120 mm Svoris 200 kg Bendra reikalinga galia 1,5 kW Kopijavimo tekinimo staklės KD-1300 - Atstumas tarp centrų 1300 mm - Centro aukštis 220 mm - Veleno apsisukimų skaičius 2800/1950/1000/500 aps./min - Įskaitant kopijavimo įrenginį - Maks. kopijavimo ilgis 1100 mm - Maks. kopijavimo gylis 50 mm - Kopijavimo centro aukštis 65 mm - Slanki dalis 100 mm - Srieginis tvirtinimas M33 - Užveržimo kūgis MK2/MT2 - Variklio galia S6 1500 W - Variklio galia S1 1100 W - Įtampa 400V / 50Hz - Įskaitant 220 mm plokštę - Įskaitant sraigtinį griebtuvą - Įskaitant dviejų dantukų 40 mm centro laikiklį - Įskaitant dantytą griebtuvą 3-16 mm - Įskaitant B16-MK2 adapterį - Įskaitant sukamą centrą MK2 - Įskaitant rankinę atramą - Įskaitant lankstą - Įskaitant kopijavimo įrenginį - Transportavimo matmenys: ilgis=1230 mm, plotis=490 mm, aukštis=2120 mm - Svoris 200 kg Iodpfx Asvz Hpcsbketr

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (LxWxH): 1680 x 930 x 1200 mm Weight: 350 kg Total power requirement: 3.5 kW Edge sanding machine KSM-3000 ECO - Table size: 960 x 350 mm - Sanding belt height: 200 mm - Sanding belt dimensions: 3000 x 200 mm - Sanding belt backing: 1050 x 200 mm - Oscillation stroke: approx. 20 mm - Belt speed: 20 m/sec - Table stroke: up to 230 mm - Oscillation motor power: 0.25 kW - Main motor power: 3.0 kW - Heavy-duty and premium overall construction - Veneer sanding attachment with precise adjustment, contact shoe, support rollers and stops - Infeed guide with grooves for veneer overhangs - Dedicated oscillation drive with geared motor - Pull-out extendable table widening with multi-roller system as standard - Sanding unit continuously tiltable up to 45° - Rounding sanding table as standard - Mitre stop with nonius angle scale - Spring-loaded belt tensioning as standard - Graphite-coated running surface - Dust extraction port: 100 mm Itodpfx Absvz Hn Ssksr - Includes sanding belt - Includes veneer sanding attachment - Includes mitre stop - Dimensions: L=1680, W=930, H=1200 mm - Net weight: 285 kg - Gross weight: 350 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 2200 x 1340 x 1050 mm Weight: 640 kg Total power requirement: 1.3 kW CO2 Cutting and Engraving Laser LASERMAX MAXI 1610-80W SINGLE - Working area X, Y: 1600 x 1000 mm - Chain conveyor belt for leather and textiles - Roll holder / unwinding device - Collection net at the front - CO2 laser power: 80 W - Engraving speed: 0–6000 mm/min - Cutting speed: 0–1000 mm/min - Repeatability / resolution: ±0.01 mm / 1000 dpi - Minimum font size: 1 mm - Linear guides on X and Y axes - X, Y drive with high-precision toothed belt via stepper motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8, Windows 10 - Control via LCD display - USB interface with 128 MB working memory - Red positioning laser for reduced setup times Ijdpfjvz Hnxsx Abketr - Freely definable zero point on the working surface for flexible operation and easy positioning - Control system: DSP - Machine software: RDWORKS - Compatible software: CorelDraw, AutoCAD, Photoshop - Power consumption: max. 1300 W - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty, and the laser tubes carry a 10-month warranty - Cutting depth depends on material (cutting capacity for acrylic approx. 25 mm) - Active water cooling for stable laser system operation and long service life of the laser tube - Also suitable for wood, ceramics, glass and plastic - Dimensions: L=2200 mm, W=1340 mm, H=1050 mm - Weight: 640 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1720 x 760 x 1160 mm Weight: 230 kg Total power requirement: 3.5 kW Edge Sander KSM-2600 ECO - Table size: 750 x 300 mm - Sanding belt dimensions: 2600 x 150 mm - Sanding belt back wall: 850 x 200 mm - Belt speed: 20 m/sec - Table stroke: up to 200 mm - Oscillation motor power: 0.25 kW - Main motor power: 3.0 kW - Extraction port: 100 mm - Oscillation drive with geared motor Itedpfx Aovz Hnrsbker - Height-adjustable cast iron table with double column guide - Dual extraction system for main sanding unit and rotary sanding table - Sanding unit infinitely tiltable up to 45° - Graphite-coated running surface - Incl. extendable table extension with multi-roller system - Incl. mitre gauge with scale - Incl. sanding belt - Dimensions: L = 1720, W = 760, H = 1160 mm - Net weight: 180 kg - Gross weight: 230 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 960 x 900 x 1460 mm Weight: 100 kg Total power requirement: 2 kW Fibre Laser Marking Machine LASERMAX FL-20 FLEXI Itedpfx Absvz Hm Uoker - Working area: 200 x 200 mm / 300 x 300 mm - Wavelength: 1064 nm - Laser source: 20W Raycus - Repetition frequency: 20–60 kHz - Marking line width

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1320 x 700 x 1120 mm Weight: 125 kg Total power requirement: 1.5 kW Edge Sander KSM-2260 Iedpfxovz Hmzo Abkjtr - Worktable: 810 x 180 mm - Table height adjustment: 100 mm - Belt length: 2260 mm - Belt width: 150 mm - Sanding belt backing: 770 x 170 mm - Sanding unit swivels: 90° – 0° - Belt speed: 16 m/sec. - Auxiliary table: 290 x 265 mm - Rotational speed: 1420 rpm - Extraction port: Ø 100 mm - Motor power: 1.5 HP / 400 V - Required space: 1320 x 700 x 1120 mm - Weight: 125 kg Complete with: - Mechanically oscillating sanding unit - Height-adjustable auxiliary table - Worktable with integrated T-slot for mitre gauge accommodation - User-friendly table height adjustment via handwheel - Spring-loaded belt tensioning for automatic compensation of belt length differences - Infinitely swivelling sanding unit for vertical and horizontal sanding - Standard with rubber-coated sanding roller for internal and external sanding - Easy belt change via quick-release lever - Graphite coating on the sanding belt backing for improved belt glide - Base cabinet with tool compartment - Longitudinal fence - 1 sanding belt

Sąlyga: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis): 800x600x500 mm Svoris: 60 kg Bendras elektros poreikis: 0,25 kW Klijų padengimo mašina GLUEMAX SINGLE B-300 - Darbinis plotis: 300 mm Itedevz Hmujpfx Abker - Klijų volelio skersmuo: 140 mm - Klijų volelio guminio sluoksnio kietumas: 70 Shor - Greitis: 20 m/min. - Galia: 0,25 kW - Įtampa: 400 V, 50 Hz - Greitojo keitimo mechanizmas klijų voleliui - Klijų talpa ir voleliai iš nerūdijančio plieno - 2 įvedimo voleliai - 2 diskinių volelių išvedimo pusėje - CE atitiktis - Matmenys: 800 x 600 x 500 mm - Svoris: 60 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (Length/Width/Height): 2600 x 3010 x 1250 mm Weight: 500 kg Total Power Requirement: 3.8 kW Combined Circular Saw and Spindle Moulder KSF-315-2600 - Table dimensions: 860 x 450 mm - Table height: 850 mm - Table extension: 500 x 310 mm - Table widening: 800 x 880 mm - Outrigger table with roller: 830 x 520 mm - Sliding table: 2600 x 270 mm - Cutting length: 2600 mm - Max. saw blade diameter: 315 x 30 mm - Max. cutting height at 90°/45°: 100 / 80 mm - Cutting width at rip fence: 1270 mm - Main saw blade speed: 4500 rpm - Scoring blade speed: 8500 rpm - Scoring blade diameter: 2-100 x 20 mm - Extraction port diameter: 100 mm - Motor output S1 100%: 3.8 kW Spindle moulder: - Spindle diameter: 30 mm - Height adjustment: 100 mm - Table openings, diam.: 80 / 100 / 140 / 190 mm - Clamping length of spindle: 100 mm - Max. tool diameter - for profiling: 180 mm - for tenoning: 200 mm Ijdpjvz Hlwjfx Abkstr - Spindle speed: 1800 / 3000 / 6000 / 9000 rpm - Motor output S1 100%: 2.8 kW - Voltage: 400 V - Dimensions (W=2600 mm, D=3010 mm, H=1250 mm) - Total weight: 500 kg Comes complete with: - Right table widening and fence bar, can be folded down to save space - Robust and smooth-running rip fence with quick release - Tiltable and height-adjustable main saw blade with scoring unit - Cast iron table with rear and right table extension with supporting leg - Extendable stop with flip stop - Roller on cross table simplifies positioning of workpiece - Cutting width right of the saw blade up to 1330 mm - Equipped with a high-quality two-piece scoring saw blade - High-quality spindle fence with hold-down system and fine adjustment - 4 spindle speeds as standard - Electronic speed display via LED - Max. cutter diameter: 200 mm - Large, removable handwheel for spindle adjustment Scope of delivery: - 2-piece tungsten carbide scoring saw blade - Tungsten carbide saw blade 315 x 30 mm Z 40 - Mitre fence

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1700 x 950 x 1260 mm Weight: 400 kg Total power requirement: 3.5 kW Edge sanding machine KSM-3000-S - Table size: 960 x 350 mm - Sanding belt height: 200 mm - Belt length: 3000 mm - Belt height: 200 mm - Sanding belt backing: 1050 x 200 mm - Oscillation stroke: approx. 20 mm - Belt speed: 20 m/sec - Table stroke: up to 230 mm - Oscillation motor power: 0.25 kW (0.34 HP) - Main motor power: 3.0 kW (4.0 HP) - Heavy-duty and high-quality construction - Veneer sanding device with fine adjustment, contact shoe, pressure relief rollers, and stops - Infeed fence with grooves for veneer overhangs - Separate oscillation drive with geared motor - Standard pull-out table extension with multi-roller system - Sanding unit steplessly tiltable up to 45° - Round sanding table as standard - Mitre stop with nonius angle scale - Spring-loaded belt tensioning as standard - Graphite-coated running surface - Extraction connection: 140 mm Itodpfovz Hlqex Abker - Dimensions: L=1700, W=950, H=1260 mm - Weight: 400 kg Scope of delivery: - Sanding belt - Veneer sanding device - Mitre stop

Sąlyga: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis): 4700x1600x1500 mm Svoris: 580 kg Bendras galios poreikis: 3 kW Ilgajuostė šlifavimo staklės LBS-3000 Itedpfx Asvz Hlkobkjr - Šlifavimo ilgis: 3000 mm - Stalo matmenys: 3000 x 820 mm - Stalo eiga: 600 mm - Įpjovos gylis: 600 mm - Įpjovos aukštis: 210 mm - Volelio skersmuo: 240 mm - Elektrinis stalo aukščio reguliavimas - Integruotas ištraukimo ventiliatorius su atskiru varikliu - 2 šlifavimo juostos greičiai: 18 / 36 m/sek. - Dešinė/kairė eiga - Šlifavimo juostos matmenys: 150 x 8200 mm - Stalas ištraukiamas 700 mm - Išimamas stalo segmentas 640 x 640 mm dideliems konstrukciniams objektams, pvz., rėmams - Grafitu dengtas šlifavimo batas minimaliam trinties pasipriešinimui - Variklis: 2,4 / 3,0 kW / 400 V - Ištraukimo jungtis 2 x 120 mm - Matmenys (I=4700, P=1600, A=1500 mm) - Svoris: 580 kg

Sąlyga: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis): 720x900x1160 mm Svoris: 120 kg Bendras galios poreikis: 2,2 kW Ilginių kiaurymių gręžimo staklės LBM-500 - Gręžimo stalo dydis: 500 x 210 mm - Gręžimo stalo aukštis: 760 - 900 mm - Maks. gręžimo gylis ties 90°: 150 mm - Gręžimo plotis: 300 mm - Aukščio reguliavimas: 140 mm - Apsisukimų dažnis: 2800 aps./min. - Westcott griebtuvas: 0 - 16 mm - Nusiurbimo jungties diametras: 100 mm - Variklio galia S1 100%: 2,2 kW - Įtampa: 400 V - Matmenys: Pl= 720 mm, G= 900 mm, A= 1160 mm - Svoris: 120 kg Pilnas komplektas su: - Preciziškas ir lengvas stalo judėjimas per daugiataškį guoliavimą - Paprastas stalo aukščio reguliavimas su kregždutės uodegos kreipiančia - Stalo aukščio padėtis reguliuojama rankiniu ratu - Aukštos kokybės 2 kartelių griebtuvas - Įrankių dėžė staklių korpuse - Kaiščių gręžimo įrenginys su 4 skirtingomis užfiksavimo padėtimis Ijdpfx Abovz Hk Tjkotr Komplektacija: - 2 žiomenų griebtuvas (16 mm) - Ekscentrinis spaustuvas

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (Length/Width/Height) 2200x1340x1050 mm Weight 640 kg Total Power Requirement 1.3 kW CO2 Cutting and Engraving Laser LASERMAX MAXI 1610-80W DUAL - Working area X, Y: 1600 x 1000 mm - Conveyor belt for leather and textile - Roll holder / unwinding device - Collection net at the front - CO2 laser power: 80 W - Engraving speed: 0-6000 mm/min - Cutting speed: 0-1000 mm/min - Repeat accuracy / resolution: ±0.01 mm / 1000 dpi - Min. font size: 1 mm - Linear guides in X and Y axes Itedpovz Hk Hsfx Abkor - Drive X, Y with high-precision belt drive via stepper motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8, Windows 10 - Control via LCD display - USB interface with 128 MB memory - Red positioning laser for reduced setup times - Freely definable zero point on the working surface for flexible operation and easy positioning - Control System: DSP - Machine software: RDWORKS - Compatible software: CorelDraw, AutoCAD, Photoshop - Power consumption max. 1300 W - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty, and 10 months on laser tubes - Cutting depth depends on material (cutting performance for acrylic approx. 25 mm) - Active water cooling for stable operation of the laser system and extended service life of the laser tube - Also suitable for wood, ceramics, glass, and plastics - Dimensions L=2200, W=1340, H=1050 mm - Weight 640 kg

Sąlyga: naujas, Gamybos metai: 2025, Matmenys (Ilgis/Plotis/Aukštis) 1200x750x1150 mm Svoris 50 kg Bendras galios poreikis 1,05 kW Kopijavimo frezavimo staklės KPF-350x500 Drožinėjimas kaip profesionalui – tinkamas figūrų, paveikslų ir užrašų kopijavimui iš medžio, metalo, akmens, plastiko ar kitų kietų medžiagų. - Ideali staklė profesionaliems ir mėgėjams drožėjams Itodpfovz Hkysx Abksr - Figūrų kopijavimas - Paveikslų ir užrašų kopijavimas - Maksimali frezavimo eiga: 500 mm - Maksimalus frezavimo plotis: 350 mm - Įrankio tvirtinimas: 8 mm spaustukas - Griebtuvėlis: 43 mm - 1050 W elektroninis frezavimo variklis su pilnavertės bangos elektronika – visuomet optimalus darbo režimas pagal medžiagą - Sukimosi greitis 10 000–32 000 aps./min. - Matmenys LxPxA 1200 x 750 x 1150 mm - Svoris ~50 kg - Tvirta, stabili ir mažai vibruojanti konstrukcija - Paprastas valdymas - Priežiūros nereikalaujančios, reguliuojamos linijinės kreipiančiosios - Ilgaamžiškumas - Pagaminta VOKIETIJOJE

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 6700 x 3350 x 1500 mm Weight: 1000 kg Total Power Requirement: 6.5 kW Panel Saw M45-3200 DELUXE - Cutting length: 3200 mm - Cutting width: 1300 mm - Cutting height at 90°: 130 mm - Cutting height at 45°: 90 mm - Saw blade tiltable to 45° - Max. saw blade diameter: 400 mm - Scoring saw blade diameter: 120 x 20 mm - Main saw blade speed: 3000 / 4000 / 5000 rpm - Scoring blade speed: 8000 rpm - Main motor: 5.5 kW / 400 V - Scoring unit motor: 0.75 HP - Sliding table profile width: 420 mm - Cast iron table: 1020 x 690 mm - Extraction ports: 90 mm and 100 mm - Required space: L=6700, W=3350, H=1500 mm - Transport dimensions: L=2240, W=1150, H=1150 mm L=3350, W=460, H=300 mm - Weight: 1000 kg Includes: - Parallel fence 900 mm with fine adjustment - Table extension: 750 x 690 mm Ijdpfx Abovz Hkteketr - Table widening: 1020 x 680 mm - Large support table 1280 x 630 mm (movable) with material roller, angle and mitre fence (extendable up to 3400 mm) - Table opening 250 x 150 mm for quick and easy blade speed change - Infinitely adjustable sliding table lock - Mitre fence 900 mm with eccentric clamp - Edging shoe, return handle - Parallelogram extraction system with original ALTENDORF overhead guard, wide extraction hood for 45° cuts and narrow hood for 90° cuts - Swivelling extraction arm - Scoring unit with separate motor - Digital display for saw angle - Speed display

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 850 kg Total power requirement: 5.5 kW Combined Circular Saw and Spindle Moulder KSF-315-2540 Circular Saw: - Cutting length / trimming length: 2,400 mm - Max. saw blade diameter: 315 mm - Motor power: 4.0 kW - Scoring unit: 0.75 kW - Speed: 4,000 rpm - Cutting height 90°/45°: 103 / 72 mm - Scoring blade diameter: 120 mm - Scoring blade speed: 8,000 rpm - Max. rip capacity at parallel fence: 1,400 mm - Table height: 860 mm - Work table: 1,450 x 650 mm - Table extension: 800 x 880 mm - Table extension: 400 x 450 mm - Sliding table: 2,540 x 350 mm - Outrigger table: 640 x 1,200 mm - Length/miter fence retracted/extended: 1,900 mm / 3,500 mm Spindle Moulder: - Spindle diameter: 30 mm - Interchangeable spindle MK 4 Isdpfxsvz Hkms Abkstr - Motor power: 5.5 kW - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm - Spindle stroke: 175 mm - Spindle tilt: 90° to 45° - Max. clamping height: 125 mm - Table opening: 270 mm - Max. retractable tool diameter: 260 mm - Max. tool diameter above table: 260 mm - Fence with integral aluminium fence jaws: 350 x 155 mm - Extraction ports: 3 x 120 mm - Voltage: 400 V, 50 Hz - Packing dimensions: L=1170, W=2000, H=1450 mm L=3290, W=325, H=450 mm - Weight: 850 kg INCLUDES: - Central control panel at the front - Rip fence with fine adjustment - Interchangeable spindle MK 4 - Scoring unit with separate motor - Integral fence jaws - Hold-down clamp - Trimming shoe