Gallmac Wmw 115 pirkti naudotą (457)

Sąlyga: naudotas, Technical details: Drilling capacity in steel (diameter): 22 mm Throat depth: 205 mm Drilling stroke: 100 mm Spindle taper: Morse Taper 2 (MT2) Spindle speed: 2 steps rpm Feed: manual mm/rev Distance spindle/table max.: 150 - 600 mm Base plate clamping surface: 350 x 400 mm Table clamping surface: 360 x 280 mm Nodovxf Irjpfx Af Iokt Rotating table: 360° Drilling table adjustment: 450 mm with hand crank Column diameter: Ø 100 mm Control voltage: 380 V Total power requirement: 0.8 kW Approx. machine weight: 270 kg Approx. machine dimensions (LxWxH): 0.6 x 0.5 x 1.95 m Column-type drilling machine incl. machine vice. In very good condition.

Sąlyga: naudotas, Gamybos metai: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Center distance: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm stepless across 8 ranges Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total connected load: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Nsdpfx Asvbhv Rjf Ijkt Application: Primarily used for reverse turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitch). Reverse turning and relief grinding is possible from the front side, the rear side, and in the axial direction of the machine. Main drive via 8-step manual gearbox. Feed gearbox designed as 12-step manual gearbox. Rear slide swiveling range = 360° Cross slide swiveling range = 360° Chuck is a taper disc Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm Measuring system ARBAH-L 3+1 Frequency inverter FRENIC 5000G11 3-jaw chuck Ø 250 mm In stock. *

Sąlyga: naudotas, Technical Details: Sheet width: 1000 mm Sheet thickness: 1 mm Frame gap: 1220 mm Blade length: 1030 mm Stroke adjustment – upper beam: 100 mm Nkjdpfsu Ibz Rjx Af Iot Stroke adjustment – bending beam: 45 mm Max. bending angle: 140° Machine weight approx.: 0.65 t Machine dimensions approx. LxWxH: 1.8 x 0.6 x 1.1 m The folding machine is equipped with two rear supports. Size of round bar support: Ø 25 x 750 mm With linear scale – left side fitted with counterweight

Sąlyga: naudotas, Technical Details: Number of spindles: 4 Drilling capacity in steel (diameter): 30 mm Drill stroke: 200 mm Drill spindle Morse taper: MT3 Spindle overhang: 350 mm Spindle center distance: 490 mm Spindle head adjustment: 500 mm Feed rates: 0.07; 0.15; 0.25; 0.33 / 4-step mm/rev Feed: manual and automatic Spindle speed: 70 ... 1,600 / 8-step rpm Distance spindle/table: max. 430 mm Distance spindle/table: min. 180 mm Table surface: 1820 x 400 mm Table adjustment: 250 mm with hand crank Total power requirement: 10.8 kW Machine dimensions (approx. LxWxH): approx. 1.0 x 2.1 x 2.8 m All spindle heads with right and left rotation Drill heads 1 to 3 with right and left rotation, without tapping function Nkedou Idt Nopfx Af Ijt Drill head 4 with automatic tapping function, Röhm chuck up to Ø 33 mm All drill heads and the table are height adjustable. Equipment: Coolant supply Int. diameter

Sąlyga: naudotas, Gamybos metai: 1957, Techninės detalės: Gręžimo galia pliene (skersmuo): 20 mm Atstumas nuo kolonos iki gręžimo ašies: 220 mm Gręžimo eiga: 85 mm Atstumas tarp veleno/stalo maks.: maks. 260 mm Sūkių diapazonas: pleištinio diržo pavara, aps./min. Veleno tvirtinimas MK: 2 Stalo tvirtinimo paviršius: 220 x 280 mm Pagrindo plokštės tvirtinimo paviršius: 225 x 280 mm Atstumas nuo veleno centro iki pagrindo plokštės: maks. 380 mm Nkedpju Id D Uofx Af Iet Bendras galios poreikis: 0,33 kW Apytikslis įrenginio svoris: 125 kg Matmenys I x P x A: 0,8 x 0,4 x 0,8 m Stalas pasukamas 380 V su 2500 mm prijungimo kabeliu

Sąlyga: naudotas, Gamybos metai: 1951, Technical details: Swing diameter over bed: 400 mm Swing diameter over carriage: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has been newly rewired and fitted with a new control cabinet. Emergency-stop switch and chuck guard installed 3-jaw chuck Ø 250 mm Live centre Four-way tool post Tool slide swivels approx. 30° to the right/left Nksdpju Ix Hdefx Af Ist Taper turning attachment (cone 15° right/left) 4 change gears

Sąlyga: naudotas, Gamybos metai: 1986, Technical details: Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over faceplate slide: 200 mm Centre height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 RPM / only 6 selectable speeds, left-right Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (transversal): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Approx. machine dimensions LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck Nodpfxeu Ix Hqj Af Iekt - Travel paths: Longitudinal slide = 580 mm, Cross slide = 170 mm - incl. tool rest (steady for turning) - incl. change gears - Steady rest Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 RPM) Sale as described.

Sąlyga: naudotas, Technical Details: Y-Axis Travel – Slide on Beam: 200 mm Spindle Taper ISO: SK 40 Swiveling Spindle Head, Left/Right: ±90° Quill Stroke: 80 mm Speed Range: 90 – 900 / 5 steps rpm Distance, Table to Spindle Underside (min./max.): 50 / 400 mm Table Mounting Surface: Attachment Area: 760 x 200 mm Table Clamping Surface: 630 x 200 mm Max. Table Load: 100 kg X Travel – Table Longitudinal: 320 mm Z Travel – Table Vertical: 350 mm Table Swiveling Range: ±30° (right/left) Distance, Table to Spindle Underside (min./max.): 50 / 400 mm Feed Rate: Table, stepless 14 – 71 mm/min Nkodou Ndb Aopfx Af Iet Total Power Requirement: 4.0 kW Approx. Weight: 1,200 kg Machine Dimensions approx. LxWxH: 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital position indicator for X and Y axes. Swiveling working spindle. Table feed is via variator gearbox. The table is swiveling. Spindle speeds are set in 3 steps via gearbox and 2 steps electrically. Coolant system installed. Milling beam extendable by approx. 350 mm. The machine vice is recommended but NOT included in the scope of delivery. It can be purchased optionally.

Sąlyga: naudotas, Technical details: Pressing force: 2.3 t Nksdpou Nfwlofx Af Iet Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Installation height with clamping plate ram/top: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Pass-through opening in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Pin hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total connected load: 1.1 kW Machine weight approx.: 0.5 t Machine dimensions approx. LxWxH: 0.6 x 0.7 x 1.6 m Press with mechanical two-hand operation. Pressure test up to 2.3 t performed. Good condition.

Sąlyga: naudotas, Technical Details: Nodpfeu Ngn Ssx Af Iokt Grinding length: 1000 mm Grinding width: 315 mm Workpiece height: 390 mm Table speed: 2.5–25 m/min Table clamping surface: 250 x 1000 mm Distance table – spindle centre: 550 mm Grinding wheel dimensions: Ø max. 315 x 13–63 x bore Ø 75 mm Control voltage: 220 / 50Hz V/Hz Total power requirement: 10.5 kW Machine weight approx.: 5.0 t Machine dimensions approx. LxWxH: 3.35 x 1.5 x 2.10 m The machine is currently located in the technical department.

Sąlyga: naudotas, Technical details: Nedpfx Afeu Ng Nps Ijkt Grinding length: 300 mm Grinding spindle - rotatable: 350° Grinding spindle head adjustable: vertical: 250 mm Spindle head adjustment: transverse: 230 mm Grinding spindle head adjustable: tiltable +/-15° Grinding diameter: Ø 250 mm Spindle speeds: 2200 - 3500 - 5200 rpm Work table: W: 120 x L: 950 mm Table movement: upper table inclined: right/left 45° mm Table travel: maximum table travel: 500 mm (manual) Magnetic chuck surface: 305 x 130 x 100 mm Grinding wheel dimensions: cup wheel 125 x 20 Ø 32 mm Total power requirement: 1.8 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 1.6 x 1.3 x 1.7 m Hydraulic dimensions: 600 x 550 x 870 mm Accessories: Universal clamping head taper MK5 Drill grinding fixture Ø 10 mm

Sąlyga: naudotas, Technical details: Table length: 1000 mm Table width: 1000 mm Machine weight approx.: 0.531 t Space requirement approx.: 1.0 x 1.0 x 0.8 m The marking-out plate is mounted on a sturdy welded steel frame made from 60 mm angle iron. Nedpfxeu Nkkkj Af Ijkt

Sąlyga: naudotas, Technical specifications: Plate length: 660 mm Plate width: 450 mm Plate height: 70 mm Through-hole in table: Ø 115 mm Machine weight approx.: 111 kg Required space approx.: 660x450x70 mm Through-hole 115 mm T-slots: according to DIN 650 and 508 - a = 22 mm - b = 38 mm Nksdpfx Aou Nkpysf Ijt - h = 40 mm - c = 17 mm

Sąlyga: naudotas, Technical details: Piston diameter: Ø 160 mm Weight: 200 kg Dimensions: 0.6 x Ø 0.3 m Nkjdsu Nurfepfx Af Iot Drawing cushion for a WMW Erfurt press PYE 160 Blank holder force: 50 Mp Ejection force: 4 Mp Stroke up to 160 mm Flange Ø 280 mm Piston centring borehole M16, mounting holes M24, Ø 118 mm Hydraulic connection 2x 1 inch internal diameter.

Sąlyga: naudotas, Technical details: Plate length: 640 mm Plate width: 330 mm Plate thickness: 65 mm Njdpfx Aju R A A Usf Iekt T-slots according to DIN 650 for T-slot nuts according to DIN 508 a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm

Sąlyga: naudotas, Technical details: Nksdpeu S Hzuefx Af Ist Width: 190 mm Depth: 315 mm Height: 500 mm Machine weight approx.: 60 kg 1 item shown at the back in the photo T-slot according to DIN 650: T-slot width a = 28 mm; h = 42 mm; b = 47.5 mm; 19.5 mm, T-slot spacing 160 mm

Sąlyga: naudotas, Technical details: Nedpfxju S H Nlo Af Iskt Width: 500 mm Depth: 260 mm Height: 795 mm Machine weight approx.: 320 kg per unit 2 units available (price per unit) without T-slots Base clamping slot: elongated hole Ø 39 x 130 mm

Sąlyga: naudotas, Technical details: Width: 625 mm Depth: 520 mm Nkedpsu S H Stofx Af Iet Height: 820 mm Machine weight approx.: 300 kg per unit 2 units available (price per unit) without T-slots Long hole Ø 33 x 330 mm

Sąlyga: naudotas, Gamybos metai: 1980, Technical Details: Pressure: 400 t Stroke: 40 - 140 mm Strokes per minute, continuous: 32 Throat depth: 400 mm Installation height, min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250x750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate L:1260 x W:760 x H:100mm - With drawing device, force 250 kN, stroke approx. 83mm - Operation via control panel No UVV (accident prevention regulations) As is (i.D.). Nkedpfxju N A Uuj Af Iot

Sąlyga: naudotas, Gamybos metai: 1980, Techninės detalės: Nkjdpfx Afsu N A U Ij Iet Slėgis: 160 t Eigos ilgis: 20-160 mm Įtraukos gylis: 400 mm Stūmoklio reguliavimas: 120 mm Smūgių skaičius: 71 smūgis/min Įrengimo aukštis: stalas/stūmoklis viršuje: 720 (esant 160 mm eigai) mm Įrengimo aukštis: stalas/stūmoklis apačioje: 560 (esant 160 mm eigai) mm Stūmoklio paviršius: 900 x 660 mm Praėjimas tarp stulpų: 500 x 450 mm Stalo matmenys: Ilgis x Plotis x Skersmuo: 1200 x 750 x 100 mm Bendras galios poreikis: apie 23,0 kW Mašinos svoris apytiksliai: apie 15,0 t Mašinos matmenys apytiksliai (Ilgis x Plotis x Aukštis): 2,7 x 1,5 x 3,45 m Valdymo spintos matmenys (Ilgis x Plotis x Aukštis): 2,0 x 0,65 x 2,15 m Valdymas per valdymo pultą/pjedestalą/pedalą ir rankinį valdymo įrenginį. Presas siūlomas pagal dvi parinktis. 1 parinktis: Parduodama esamos būklės, neprijungta, neišsami, neveikianti. 2 parinktis: Presas bus pilnai atnaujintas – visi komponentai bus pakeisti, atnaujinti ir patikrinti. Presas bus paruoštas naujam naudojimui. Prašome užklausose dėl šio preso nurodyti pageidaujamą pasiūlymo variantą!

Sąlyga: naudotas, Technical details: Plate length: 800 mm Plate width: 455 mm Plate height: 75 mm Machine weight approx.: 264 kg Transport dimensions (LxWxH): 800 x 455 x 250 mm Nedpfxju N Dhio Af Ijkt Ram plate removed from a PYE 160S press - With central through-hole Ø 40mm - With 6x pitch circle holes Ø 16mm, pitch circle Ø 160mm - Diagonal T-slot according to DIN 650 (a = 19mm; h = 25mm; b = 38mm; c = 16mm) - Support plate on the underside = spacing approx. 410mm

Sąlyga: naudotas, Technical details: Nsdpfx Aou N Dyrjf Iokt Plate length: 1100 mm Plate width: 700 mm Plate height: 85 mm Machine weight approx.: 430 kg Clamping plate, cast steel, with T-slot according to DIN 650 a=25; h=41; b=48; c=24 mm; pitch 76 mm

Sąlyga: naudotas, Technical details: Table diameter: 450 mm Table rotation - manual/mechanical: 360° Clamping table swivelling: 90° mechanical Machine weight approx.: 100 kg Dimensions: L: 800 x W: 700 x H: 400 mm Nsdpsu N D Ayofx Af Iokt The surface of the rotary table is hand-scraped. Very good condition! Micrometer-precise locking Positioning within 0.01 mm range T-slots according to DIN 650, radial arrangement Base clamping: 16 mm (6 bores)

Sąlyga: naudotas, Technical details: Width: 350 mm Depth: 120 mm (without plate) Height: 315 mm (without plate) 3 units available with base plate (A+B+C) Nodeu N Eczjpfx Af Iskt 1 unit available without base plate (D) Dimensions of the base plate: W: 350 x D: 320 x Thickness: 30 mm Price per unit

Sąlyga: naudotas, Technical details: Faceplate diameter: 800 mm Width: 140 mm Weight: 330 + 50 kg This faceplate is supplied without clamping claws. Clamping is carried out using the matching clamping plate Ø 790 x 26 mm. The clamping slots, each with a length of 300 mm, are radially arranged. T-slots according to DIN 650: a = 22 mm; h = 37 mm; b = 40 mm; c = 17 mm Flange mounting: Mounting surface outer Ø 410 mm and inner Ø 195 mm 6x clamping bolts on bolt circle Ø 235 mm Clamping plate: Nkedpfxsu N E Ano Af Ijt 4x through holes Ø 20.5 mm on bolt circle Ø 630 mm Various clamping holes M20 / M16 and M12 arranged in distribution Equipment: 4 pieces clamping screws M20 with clamping irons