Formos Testeris pirkti naudotą (7 505)

Sąlyga: labai geros būklės (naudotas), Volelinis kaktinis frezas, volelinis frezas, frezas Kedpfx Afeb A Huve Isdg - Būklė: kaip naujas - Skersmuo: 50 mm - Darbinis aukštis: 100 mm - Kietmetalio plokštelėmis - Tvirtinimas: SK50

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Vertical block mold: KURTZ model MFV (1250x1250/1050x4900) Basic specifications: • Year of manufacture: 2005 • Block dimensions (LxWxH): 1250x1250/1050x4900 mm • Operating voltage: 3x400V 50Hz • Power consumption: 77 kW • BLOCK MOLD with movable side wall • Complete vacuum system (GARDNER DENVER/SIEMENS VACUUM SYSTEM) • REXROTH-BOSCH hydraulic system • Operational silo for pre-loading the block mold with dust extraction • Siemens PLC and Siemens HMI touch panel were REPLACED with NEW UNITS in 2019, and the control software was UPGRADED • SIEMENS TOUCH SCREEN control panel (replaced with a NEW, larger display) Kodpfsucvq Hex Af Ijdg • MATTHEWS marking/date printer for blocks • Block evacuation system with block storage • Complete documentation • Condition: EXCELLENT It is possible to adjust the maximum block height to, for example, 4550-4600 mm.

Sąlyga: beveik kaip naujas (naudotas), Here we offer you a weathering test device. The Xenotest Beta+ is a premium xenon chamber tester featuring a rotating sample carousel and an exposure area of 4,000 cm². It is equipped with a full suite of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Thanks to its large test chamber and high reliability, it is ideally suited for larger sample quantities or oversized specimens. - 3x 2200 W air-cooled xenon lamps - 4,000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touchscreen with color display for monitoring and display of test parameters - Direct setting and control of irradiance (300–400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Diagnostic message display - Storage for 10 user-defined test methods - Pre-programmed international standard test procedures - Multilingual user interface - Aging-resistant XENOCHROME filters for simulation of outdoor daylight and indoor daylight behind glass - On-rack XENOSENSIV 300–400 nm for measurement and control of irradiance (in W/m²) and BST (°C) at sample level - Selectable temperature control via chamber air temperature (max. 70 °C) or dual control: chamber air temperature and black standard temperature (up to 130 °C) - Fan-assisted temperature differential between chamber and black standard temperature - Ultrasonic humidification system for humidity regulation - Sample spray system with integrated 60-liter water tank - Outer cylinder made of special UV glass - Automatic shutoff by total irradiance, exposure time, or cumulative operating time - Advanced auto start functions - Data output via memory card or RS232 interface - Ethernet interface for connection to internal computer networks and use with XenoTouch Add-Ons 1, 2, and 3 (remote operation, email service, online monitoring) Dimensions: Width x Depth x Height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors reserved!) Please feel free to contact us by phone for further questions. Kodpfx Afsihfrrs Ijdg

Sąlyga: geras (naudotas), Atlas Kodpfx Afsuuaryj Iedg Type: Xenotest Alpha LM High Energy Weathering Test Device Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOCHROME Filter XENOSENSIV Gear Unit Lamp output control in W/m² Sample chamber temperature regulated up to 70°C Measurement sensors at sample level: XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Spray function Water supply with integrated water tank Electrical configuration: 230V, 50/60Hz Absorption Filter 7 IR: Steady-state 40 - 140 W/m² / Cyclic 21 - 72 W/m² Window Glass 10 FG: Steady-state 40 - 110 W/m² / Cyclic 21 - 57 W/m² Absorption Filter 4 IR + 3 Window Glass: Steady-state 40 - 140 W/m² / Cyclic 21 - 72 W/m² Absorption Filter 6 IR + 1 UV: Steady-state 40 - 140 W/m² / Cyclic 21 - 72 W/m² Relative electrical performance without XENOSENSIV sensor: continuously regulated to the set value: 53 - 120 % Sample chamber temperature: 20 - 70°C (depending on selected filter configuration) Black standard temperature: Steady-state 25 - 130°C / Cyclic 25 - 100°C Relative humidity: 10% - 95% Fan speed: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and possible errors!) Further questions can be answered by phone.

Sąlyga: labai geros būklės (naudotas), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm³/10 min according to international standards. Temperature range: +30 - +400°C (extendable to 500°C). Device features: - Microprocessor for automatic testing, storage of test parameters (25 methods), storage and saving of results for 40 tests; Automatic calculation and display of temperature value and rheological basic data RS232 and USB interface Diagnostics Automatic rotary cutter for cutting extrudate Nozzle locking mechanism Weights: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions can be operated via computer interface. The Visual MELT software is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Procedures A and B. Base model + encoder + lift for raising and lowering the weight + automatic extrudate cutting knife, Code 7026.000 Max. force: 1200 N Stroke mm: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) Current: 1.8 A Kjdpfsvx Sxdox Af Isdg Max. velocity: 10 mm/sec Condition: used Scope of delivery: (See photo) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them for you by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a weathering test device. Heraeus Atlas Xenotest BETA – a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. Features: - XENOSENSIV drive system - Lamp power control in W/m² - XENOCHROME 320, 35–100 W/m² - Sample chamber temperature regulated up to 80°C - Measurement sensors at sample level: XENOSENSIV E(300–400 nm) - Humidification / spray function - Water supply with integrated water tank - Sample chamber temperature: ambient to 80°C - Black standard temperature: surface up to 130°C - Relative humidity: 10–95% - Electrical configuration: 3/N/PE AC 400V±10% 50–60 Hz - Power connection: 32A - Power consumption: approx. 12 kVA - Nominal power of the xenon lamp: 2200VA - Xenon lamp power: 2800VA - Rated current: 16A - Maximum lamp current: 20A - Dimensions: width 900 mm x depth 1200 mm x height 1800 mm - Maximum specimen area: 4000 cm² - Weight: approx. 400 kg Kdjdpfxeg Dglye Af Ijg - Type: Heraeus Atlas Xenotest BETA LM - Condition: used - Scope of delivery: (see image) (Subject to changes and errors in technical specifications; all information is provided without guarantee!) If you have further questions, we are happy to assist you by phone.

Sąlyga: naudotas, KB Prüftechnik Hardness Testing Machine Type: KB 750 BVRZ Machine Type: KB 750 – 1 kg to 750 kg UNIVERSAL DIGITAL Kdsdpfxeu Hy Imj Af Ijg KB Universal Hardness Testing Machines for automatic, standards-compliant hardness testing. Suitable for all hardness testing methods within the load range HV 0.2–1 – 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics), and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of indentations on the built-in LCD monitor via integrated video camera and zoom lens ensure the highest evaluation accuracy as per standards. All hardness values are displayed digitally in real time. User-friendly and powerful control panel with high-contrast, glare-free color LCD monitor. Impression measurements are parallax-free. Test forces are applied electronically with maximum precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment set to enable immediate commissioning with the ordered indenters. A selection of mounts, test tables, indenters, objectives, hardness comparison plates, etc., are available. Connection to a PC or central computer is possible with all KB hardness testing machines. With the optional full automation software and motorized cross table, the machine can be operated as a fully automatic system. - Fully automatic testing process - Optical evaluation via integrated video analysis - Extremely user-friendly and efficient - Large color LCD display - Industrial membrane keypad - Flexible software customization - 1:7 zoom lens - Parallax-free measurement - Force measuring cells, regulated force application, LED illumination - Rockwell resolution: 0.025 HRC - Extremely efficient - 200 user-definable test programs - Calibration machine accuracy (option) - Innovative LED ring light (option) - Automatic image evaluation (option) - 2 parallel + serial interfaces, plus keyboard connection - Extended load range XL (option) - Freely switchable language selection - German, English, French, Italian KB750 BVRZ: Test load: 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Super Rockwell Test table Ø80 mm Motor zoom 1:7 Objective 4x for HV10-HB5/750 NOT suitable for HV5 Operating features: Programmable digital panel with the following functions: - Measuring the hardness indentation on the LCD display with movable measurement markers, parallax-free - Logically structured, simple user interface - Freely create and store up to 200 test programs - Automatic force selection based on chosen test method - Freely selectable application times for test forces - Freely selectable holding times for test forces - Online help - Automatic correction for curved surfaces in accordance with DIN EN ISO - Control of the fully automatic testing process - Direct digital hardness value display - Tolerance display - Conversions according to DIN 50150 Table B1 - Report generation in DIN A4 format with standard printer via parallel interface - Serial interface for data output to PC - Optional network connectivity - Four languages: German, English, French, Italian Statistical functions, such as: - Number of tests - Min / Max - Mean value - Range - Standard deviation - cp / cpk - Histogram (Technical data subject to change and errors excepted!)

Sąlyga: naudotas, Chroma Tipas: ATE 17011 Matmenys: P x G x A 600 x 800 x 1760 mm Regeneracinis elementų testeris (5V/100A x 12 kanalų) Maitinimas: 400V/50 Hz 24 KVA Duomenų kaupiklis (64 kanalai) 8 portų jutiklių kortelė Modulis 17212R-5-100 Maks. 5V /100A Didžiausias kanalų skaičius: 12 (fiksuota) Galima jungti lygiagrečiai: 200A, 300A, 400A, 600A, 1200A V Reguliuojama nuo 0 mV iki 5000 mV * 1, skiriamoji geba 1 mV A Reguliuojama nuo 0,01 A iki 100,00 A, skiriamoji geba 0,01 A Jungtis: 400V/50Hz, 5 laidai 24 kVA Svoris: 250 kg Ksdpfx Aswwrn Uef Isdg Būklė: naudotas Komplektacija: (žr. nuotrauką) (Mūsų techniniai duomenys gali būti keičiami ar pateikiami su klaidomis. Atsakomybė nepriimama!) Papildomai klausimus galime aptarti telefonu.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, Plokščiojo stiklo formos pjovimo linija LISEC baseCUT-37/26 + BASE TABLE BREAK Pagaminimo metai: 2015 Kdodpfxsxlq Nwo Af Isg Didžiausias stiklo dydis: 3700 x 2600 mm „4 viename“ – su pakreipimu, pjovimu, laužymu ir Low-E šlifavimu Pristatymo komplektacijoje – 2 vnt. laisvo kritimo stendų LISEC LBS-37/26FF Stiklo storis: 2 – 19 mm Stiklo pjovimo greitis: iki 140 m/min Labai geros ir švarios būklės Gera darbinė būklė, patikrinta Parduodama esama būklė Galima iš karto

Sąlyga: geras (naudotas), Įrankiai / Formos Multivac T300 Traysealer įrenginiui Turime šiuos įrankius / formas Multivac T300 Traysealer modeliui: Kedpfxou Tczmo Af Iedg Padėklo dydis 227 x 178 mm (2 įrankiai sandėlyje) Padėklo dydis 278 x 187 mm Padėklo dydis 208 x 160 mm (SKIN pakavimui)

Gamybos metai: 2020, Sąlyga: naujas, Semi-automatic carton former Kdsdsf Evh Tepfx Af Iog - Starbox 65 - Connecting roller conveyor Robotape-Starbox 65 - 4 swivel castors with brakes Sample photos – machine is still in original packaging

Gamybos metai: 2020, Sąlyga: naujas, Semi-automatic carton erector - Starbox 50 - Connection roller conveyor Robotape-Starbox 50 - 4 swivel castors with brakes Ksdpfx Aef Evhlsf Ijdg Sample photos – the machine is still in its original packaging

Sąlyga: naudotas, Edge sanding machine LÖWER RSM 280 SX -used- Frame sanding machine Sanding pad, Oscillation, Frame sanding device, Kdedpfx Afsu R Tbhe Ijg Feed belt, Belt cleaning ----- Technical specifications ----- Sanding width: 190 mm, Max. workpiece thickness: 120 mm, Feed speeds: 6, 11, 16 m/min, Motor: 5.5 kW, Weight: 550 kg

Sąlyga: labai geros būklės (naudotas), Wide belt sanding machine FORMAT 4 Finish 1302 - used - Constant working height thanks to top section adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic carpet centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Specifications ----- Kedpfx Afjxnm Rcj Iedg Working width: 1,300 mm, Number of belts: 2 pcs, Sanding belt size: 1,310 x 2,200 mm, Feed speed: 3.7–16 m/min, Segment width of sanding pad: 55 mm, Max. workpiece thickness: 170 mm, Min. workpiece thickness: 5 mm, Extraction nozzle diameter: 2x200 mm, Motor power: 18.5 kW, Motor power 2nd motor: 15 kW, Dimensions (LxWxH): 1,950x2,250x2,600 mm, Weight: 2,400 kg Quality Information: - Belt run / imbalance checked - Sanding pad checked / reconditioned - Height adjustment checked - Complete basic cleaning - Electrical system checked - Immediately ready for use

Sąlyga: labai geros būklės (naudotas), Edgebander FORMAT 4 Tempora 60.06 glueBox – used - Touchscreen - Swivelling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Diamond jointing cutters for both climb and counter rotation - Glue pot located underneath - Quick-change system for glue pot - Compatible with PUR adhesives - GLUEBOX system - Pressure unit with driven roller - End trimming unit with 2 HF motors - Pneumatically swivelling end trimming unit - Flush / radius trimming unit - Motorised position control of trimming unit - x-motion PLUS - Corner copying unit with diamond-tipped cutter - Radius scraper - Radius scraper with motorised positioning - Surface scraper - Surface scraper with usage-based operation - Entry lock - Spray device for release agent - Spray device for lubricant - Spray device for cleaning agent - Year of manufacture: 2022 ----- Technical Data ----- Edge thickness (coil material): 0.4 – 3 mm Edge thickness (strip material): 3 – 6 mm Workpiece thickness: 8 – 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen size: 15 inches Jointing cutter dimensions: D 80 x 64 mm Jointing cutter motor power: 1.1 kW End trimming motor power: 0.35 kW Trimming station power: 0.75 kW Extraction connection diameter: 80 + 160 mm Compressed air connection: 7 – 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Information: - All settings checked - Calibrated as per manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electricals checked - Pneumatics checked Kdsdpfxeu R S Nwo Af Isg - Immediately ready for use

Sąlyga: labai geros būklės (naudotas), Pharmatron 5Y tablet tester Der Härteprüfer ist ideal zur Messung des Bruchverhaltens von Tabletten geeignet. Zykluszeit: 25 Tabletten / 3 Minuten, für Tablettendurchmesser bis zu 33 mm, 1Ph. Kodpfsiy Nm Rsx Af Ijdg

Sąlyga: naudotas, Gamybos metai: 2014, Naudota mašina Pagaminimo metai: 2014 Įranga ir techniniai duomenys: - Darbinė sritis X: 3.740 mm - Darbinė sritis Y: 1.570 mm - Darbinė sritis Z: 350 mm - 4-oji ašis: yra - 5-oji ašis: 5 ašių velenas, variklis 12 kW - Su papildomu C ašies užraktu - Įrankių keitimo vietos: 24 su diskiniu keitikliu; 10 mašinos stovo kairėje pusėje - Vertikalios gręžimo galvutės: 12 - Mašinos stalas: konsolinis stalas - Stalo pozicionavimo automatika: yra - 6 ruošinio atramos tipo e-motion - Ruošinio speciali tvirtinimo sistema rėmams - Programinė įranga: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 apdirbimo laukai švytuokliniam užkrovimui - Su automatiniu centriniu tepimu - Su mobiliu valdymo pultu su PC monitoriumi - Su atsisaldymo įrenginiu skydelio spintai - Su vakuuminiu siurbliu 90 m³/h - Su rankiniu valdymo prietaisu - Įskaičiuota: 12 rėmo spaustukų, 8 dideli ir 4 vidutiniai siurbtukai Prieinamumas: apie 2026 m. sausio pabaigą Vieta: Šiaurės Reinas-Vestfalija Kodox Hllxepfx Af Isdg

Sąlyga: naujas, Neu! Kedpfx Aefftr Hof Isdg Entwickelt für Belastungstests von Lattenrosten. Leistungsaufnahme: 230 V Die Spannkraft ist von 2 bis 10 bar (bis zu 200 kg) einstellbar. Prüfgeschwindigkeit ca. 44 Stück/Minute. Längenverstellung des Prüflings möglich. Einfache Wartung. Lamellentest etikettiert. Die Kennzeichnung des Etiketts kann variieren.

Gamybos metai: 2017, Sąlyga: geras (naudotas), - Standardinis nuokrypis: 0,01 g/l Kjdpfxewff A Io Af Iodg - Geros būklės

Sąlyga: naudotas, Gamybos metai: 2006, Gamintojas: Robopac Modelis: Athena 5545 / Combi Metai: 2006 Tipas: Automatinė L formos termoplovimo pakavimo mašina ir tunelinis termoploviklis Sandarinimo strypo matmenys: 550 x 450 mm Sandarinimo matmenys: 500 x 350 mm Minimalus produkto dydis: 50 x 50 x 20 mm Kdodpex R Dd Uefx Af Iog Didžiausias produkto aukštis: 120 mm Plėvelės rulono plotis: 600 mm Konvejerio juostos greitis, valdomas inverteriu: 10 – 40 m/min Našumas: 30–35 pak./min. (priklausomai nuo produkto matmenų ir plėvelės charakteristikų) Galia: 11 kW Įrenginys darbo metu: ?v=XY4arSTWZSs

Gamybos metai: 2010, Sąlyga: beveik kaip naujas (naudotas), Inline flat glass cutting table with Low-E grinding LISEC GFB-70/33RE Year of manufacture: 2010 Maximum glass size: 7000 x 3300 mm Low-E edge deletion Glass transport via conveyor belts Kodpfx Afoiv Siro Isdg In very good and clean condition Available immediately

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, FUJI horizontalus flowpacker, specifikacijos: Pakavimo tipas: Form-Fill-Seal-Shrink Tipas: Alpha Wrapper FW3710 BS/Ba7 Metai: 2014 Integruotas susitraukimo blokas (elektrinis) Įskaičiuota dujų įpurškimo funkcija (N₂/CO₂ mišinys) Nerūdijantis plienas U formos konvejeriai įtraukti Yra dokumentacija Formatai: - Sūrio lazdelės: 30x10 cm - Euroblokas: 30 x 60 cm - Sūrio kvadratas: 30 x 30 cm - Apvalus sūris: ø20cm Kedox E Uhgspfx Af Iodg Labai gera būklė

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Atskiras valdymas pagrindiniam pavaros ir plėvelės transportui. Siemens S7 valdymo sistema. Siemens lietimui jautrus ekranas. Fotoelementų valdymas plėvelės transportui. Skersinis ir išilginis karštas sandarinimas. Plėvelės klijavimo stalas. Šoninio lenkimo įrenginys. Įrenginys dabar su pačia moderniausia Siemens S7 valdymo sistema! Žiūrėkite vaizdo įrašą: youtube: VP220 pakavimo mašina, shorts Ksdpovk Rv Sofx Af Iedg

Sąlyga: naudotas, Univ., frezavimo staklių stalas, kampinis stalas, tvirtinimo kampas, tvirtinimo stalas, tikėtina MAHO gamyba. T-formos griovelių stalas, prailginamas stalas universaliosioms įrankinėms frezavimo staklėms. Stalo Nr.: 76-400-1 / 2210 05 00. Stalo matmenys: 700 x 330 mm. Bendras aukštis: 210 mm. Griovelių plotis: 12 mm. Griovelių atstumas: 45 mm. – Stalviršis su 7x T-formos grioveliais 12 mm. – Montavimo paviršius 90°, 13 mm gręžiniai, 14 mm pailgos skylės tvirtinimui, 12 mm vedančioji griovelė. – Viršutinės montavimo plokštės skylių atstumai Ø13 mm = 500 mm, 50 mm nuo stalo paviršiaus (matuojant per centrą). – Vidurinės montavimo plokštės skylių atstumai Ø13 mm = 472 mm, 95 mm nuo stalo paviršiaus (matuojant per centrą). – Vidurinės montavimo plokštės pailgų skylių atstumai = 475 mm, 140 mm nuo stalo paviršiaus (matuojant per centrą). – Apatinės montavimo plokštės pailgų skylių atstumai = 475 mm, 185 mm nuo stalo paviršiaus (matuojant per centrą). Išmatavimai (I x P x A): 820 x 330 x 210 mm. Svoris: 61 kg. Geros būklės. Kedpfx Afexy Stys Isdg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, For sale: VIRO TNG-4 Vertical Block Moulding Machine Specifications: • Year of manufacture: 2016 • Block dimensions: - Height: 4100 mm - Depth: 1300 mm - Width: 1040 mm - Total volume: 5.5 m³ • Cycle times: - Density 12-16 g/l: 20-22 blocks/hour - Density 17-19 g/l: 18-20 blocks/hour - Density 20-23 g/l: 16-18 blocks/hour - Density 24-28 g/l: 14-15 blocks/hour - Density 29-35 g/l: 12-14 blocks/hour • Filling system: - Silo capacity: 10 m³ - High-pressure suction blower: 11 kW - Filling diameter: 300 mm - Drive: hydraulic • Mechanics: - Hydraulic system: 15 kW - Mould removal: hydraulic - Door movement: hydraulic Kdedspwbmbjpfx Af Ijg • Electrical equipment: - Servo amplifiers: Mitsubishi - Frequency inverters: Mitsubishi - PLC: Siemens Simatic - HMI panels: Siemens Simatic - PC: Axiomtek The machine is manufactured in compliance with European standards, with a normalized, stress-relieved and precision-machined frame, and pressure-tested. Equipped with a maintenance platform with assisted access and fall protection. Condition: like new. It is also possible to purchase a complete production line (including installation, commissioning, and staff training). TAG: block mould, block-mould, blockmould, polystyrene, EPS