Emcomat 20 D pirkti naudotą (68 614)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Emcomat Emco EM20D Lead and Feed Screw Lathe Year of Manufacture 1995 Superb Condition CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing diameter over bed: 400 mm >> Swing diameter over cross-slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed ranges, stepless from 35–3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Installation dimensions (approx.): Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight: approx. 850 kg Accessories and Features: Kjdpfxowag Ste Af Isdg >> 3-axis position display >> 1 piece three-jaw chuck with 1 set of jaws >> Toolholder with 3 tool pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: Offered is a Emcomat 20D lead and feed screw lathe, year of manufacture 1995, in lightly used condition. The machine is, of course, fully functional. All slides operate very smoothly and uniformly. The bed guides are in very good condition. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself.

Sąlyga: labai geros būklės (naudotas), - Digital 3-axis position display. - Accessories available. Working range Centre distance: 1000 mm Centre height: 200 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 250 mm Distance between compound slide and turning centre: 40 mm Bed width: 260 mm Longitudinal slide traverse: 900 mm Cross slide traverse: 220 mm Compound slide traverse: 110 mm Bed slide guide length: 380 mm Turning tool cross-section: 20x20 mm² Spindle Spindle nose to DIN 55029 (Camlock): 5" Spindle bore: Ø 50 mm Internal taper to 7178: 1:22 Max. faceplate diameter: Ø 260 mm Max. chuck diameter: Ø 200 mm Spindle speeds: 40 – 3000 rpm Speed control: stepless Mechanical speed ranges: 4 Drive motor Three-phase motor with integrated brake Stepless speed adjustment (frequency inverter) Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Tailstock Quill diameter: Ø 50 mm Kdedpfow U Ac Nsx Af Isg Quill stroke: 120 mm Quill internal taper: MT 3 Machine dimensions Total length: 1950 mm Total height: 1635 mm Total width: 1060 mm Spindle centre height above floor: 1133 mm Total machine weight: 865 kg

Sąlyga: labai geros būklės (naudotas), ašių konfigūracija: 3 ašys, pirmoji registracija: 04/2021, pakaba: oras, spalva: juodas, Gamybos metai: 2021,

Sąlyga: naujas, Machine according to DIN 8605: Lathe with enhanced precision. Centre distance: 700 mm Centre height: 170 mm Swing over bed: Ø 340 mm Swing over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Kedpfedctnbjx Af Iodg Cross slide length: 410 mm Cross slide width: 150 mm Bed carriage guide length: 380 mm Tool shank cross-section: 20x20 mm Distance centre - top slide: 34 mm Top slide (compound rest) swivel range: 60/120° Main spindle: Spindle mount DIN 55029 (Camlock): S 5 Spindle bore: Ø 50 mm Internal taper to DIN 7178: 1:22 Spindle diameter at front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40-3000 rpm Speed control: Infinitely variable Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at the main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard): 0.4 - 7.0 mm 32 inch threads (with optional gear set D3Z200): 56 - 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 - 3.5 32 diametral pitch threads (with optional gear set D3Z200): 112 - 8 Tailstock: Quill diameter: Ø 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights Between centers: 50 kg With tailstock support: 150 kg Further basic equipment (standard accessories): Including machine stand and integrated 3-axis digital readout, German, with color display 1 longitudinal stop 1 fixed center, taper 1:22, DIN 7178 1 fixed center MT3 1 tommy bar 1 key part 1 grease gun 3 hexagon bolts M16x60 - DIN 933 3 hexagon nuts M16-8 DIN 934 1 single tool holder 1 spanner A13x17 DIN 837 1 open-ended spanner SW 19 1 open-ended spanner SW 22 1 hex key SW 5 1 hex key SW 6 1 hex key SW 8 3 shear pins 1 electric cabinet key 1 operating manual including spare parts list 1 electrical documentation 1 test certificate Packaging (for HGV transport with pallet and polyethylene hood) Machine according to CE Note: Images include special equipment/accessories!

Sąlyga: naudotas, Hydraulic cylinder, synchronizing cylinder, steering cylinder -Piston diameter: 38 mm Kjdpfxodkf I To Af Isdg -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

Sąlyga: naudotas, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer Kodsfitflepfx Af Isdg - Three-phase transformer - Type: D 32/20, 50/60 Hz, 6000 VA - Primary: 3x 400 V - Secondary I: 1x 110 V 6 A - Secondary II: 1x 230 V 6 A - Secondary III: 3x 18 V 10 A - Secondary IV: 3x 66 V 30 A - Dimensions: 420/175/H430 mm - Weight: 80 kg

Sąlyga: geras (naudotas), Double bench grinder, double grinding machine, pedestal grinding machine, pedestal grinder - Manufacturer: Greif, double bench grinder type D 20/4 - Grinding wheels: max. Ø 250 mm - Motor power: 0.37 kW - Speed: 1400 rpm - Operating voltage: 220/380 volts Kjdev Hawqepfx Af Iedg - Dimensions: 500/310/H315 mm - Weight: 40 kg

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout by K&C, As New from Training Workshop – Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 / Machine No.: D3F H1 010 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, infinitely variable from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock taper: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required floor space (approx.): Length 1.6 x Depth 0.9 x Height 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> K&C 3-axis digital readout, new, 12 months manufacturer’s warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter, quick zeroing, counting direction switching, Kdodjwvuf Topfx Af Isg >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> Multifix B tool post with 2 holders >> Chip guard >> Coolant system About the Machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is, of course, fully functional. The bed ways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new 3-jaw chuck. You are welcome to inspect the machine under power on-site and see the condition for yourself.

Gamybos metai: 2026, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, The extruder model EX20-25d is designed for laboratory-scale applications and achieves a plasticizing throughput of 5 kg/h. The extruder can be used for material development, small batch production, or as a filament extruder. As standard, we configure this extruder model with a bimetallic barrel and through-hardened screw for high-temperature operation (up to 400°C). This allows for the processing of abrasive raw materials, technical plastics, PEEK, metal compounds, ceramics, or fiber-reinforced materials, among others. Ksdpfjiv H Eksx Af Iedg Available machines can be inspected at our facility in Königswinter. We also realize other machine dimensions – please contact us for individual requirements.

Sąlyga: labai geros būklės (naudotas), EMCO Precision Lathe EMCOMAT 17 D Kedpexx S R Aofx Af Isdg Incl. 3-axis digital readout EMCO Year of manufacture: 2007, with CE marking Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: Ø 340 mm Swing diameter over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Bed slide guideway length: 380 mm Tool cross section: 20 x 20 mm Distance from turning centre to top slide: 34 mm Top slide (compound) swivel range: 60 / 120° Main spindle: Spindle nose: DIN 55029 (Camlock) Spindle bore: Ø 50 mm Internal taper: DIN 7178 1 : 22 Spindle diameter in front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40 – 3000 rpm Speed control: stepless Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Threads: 20 (28) metric threads (standard setup): 0.4–7.0 mm Tailstock: Quill diameter: Ø 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights (between centres): 50 kg, supported by tailstock: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and for training purposes. Equipment/features: - EMCO 3-axis digital readout with colour display - Potentiometer, EMERGENCY STOP button, digital RPM display on the control panel next to the digital readout - 3-jaw chuck - MULTIFIX toolpost size B - Electromechanically interlocked chuck guard - Quick-action collet fixture - MICROJET coolant spray system - Chip guard/rear cover - Machine lamp - Machine feet - Bed stop Condition: Very good, ex-training workshop "Due to its quality and price, this machine is not suitable for private individuals." Available from March 2026

Sąlyga: naudotas, Gamybos metai: 2007, Techniniai duomenys: Tekinimo skersmuo virš lovos: 340 mm Tekinimo skersmuo virš suporta: 190 mm Tekinimo ilgis: 700 mm Kdodpsx Apd Uefx Af Isg Veleno apsukos: 40–3000 aps./min. Veleno skylė: 50 mm

Sąlyga: labai geros būklės (naudotas), rida: 38 900 km, galia: 188 kW (255,61 AG), pirmoji registracija: 12/2022, kuro tipas: dyzelinas, ašių konfigūracija: 4x2, ratų bazė: 5 250 mm, kuras: dyzelinas, spalva: balta, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, pavarų skaičius: 8, emisijos klasė: Euro 6, bendras ilgis: 9 750 mm, bendras plotis: 2 600 mm, krovimo vietos ilgis: 74 000 mm, krovinių skyriaus plotis: 24 600 mm, krovos erdvės aukštis: 26 000 mm, Gamybos metai: 2022, Įranga: ABS, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kruizo kontrolė, oro kondicionavimas, priešrūkiniai žibintai, trauki kontrolė, vairo stiprintuvas,

Sąlyga: geras (naudotas), rida: 79 700 km, galia: 180 kW (244,73 AG), pirmoji registracija: 06/2023, kuro tipas: dyzelinas, ašių konfigūracija: 4x2, ratų bazė: 5 000 mm, kuras: dyzelinas, spalva: balta, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, pavarų skaičius: 8, emisijos klasė: Euro 6, bendras ilgis: 9 490 mm, bendras plotis: 2 550 mm, bendras aukštis: 3 660 mm, krovimo vietos ilgis: 75 000 mm, krovinių skyriaus plotis: 24 800 mm, krovos erdvės aukštis: 25 500 mm, Gamybos metai: 2023, Įranga: ABS, Bluetooth, centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, galinis keltuvas, kruizo kontrolė, oro kondicionavimas, priešrūkiniai žibintai, spoileris, trauki kontrolė, vairo stiprintuvas,

Sąlyga: naujas, darbinis slėgis: 2 000 juosta, aukšto slėgio žarnos ilgis: 10 000 mm, kuras: dyzelinas, bendras svoris: 243 kg, garantijos trukmė: 24 mėnesiai, temperatūra: 80 °C, The Kärcher HDS 8/20 D high-pressure cleaner effectively removes even the most stubborn dirt thanks to its ability to heat water up to 80°C. The unit consumes minimal amounts of water and fuel for heating, ensuring economical operation. The thoughtfully designed operating concept with intuitive control panel guarantees easy handling, while large wheels and ergonomic push handles significantly facilitate machine transport. The large water filter installed at the water inlet is easy to remove and clean and provides additional protection for the pump against water contamination. The compact design allows the device to be easily transported over uneven terrain and to overcome obstacles such as curbs. The modern "Soft Damping System" (SDS) compensates for vibrations and pressure spikes in the high-pressure system. Product Advantages: - The combustion engine allows use in locations without access to electricity. The engine is started electrically. - A reliable crankshaft pump ensures maximum efficiency and long service life. - The open design ensures very easy access to all necessary components of the device. - The brass pump head and the automatic pressure relief system extend the durability of the unit. - A large water filter protects the pump from any contaminants in the water. - With an operating pressure of 200 bar and a flow rate of 800 l/h, the machine can be used effectively for demanding tasks in construction, logistics, and agriculture. - The device also features the EASY!Lock equipment mounting system, allowing you to change attachments five times faster than with conventional threaded systems. Technical Data: Kedpfx Aov Tafbof Iodg Condition: NEW Model: HDS 8/20 D Series: Professional Thread type: KARCHER !EasyLock Series Power supply: Diesel Pump output (l/h): 800 Operating pressure (bar): 200 Fuel consumption (kg/h): 5.9 Weight (kg): 243 Dimensions (L x W x H) (mm): 1130 x 930 x 895 Equipment: - Spray gun: Karcher Professional !EasyForce Advanced - High-pressure hose: Karcher Professional – 10 m, DN8, 315 bar – !EasyLock - Lance: Karcher Professional 1050 mm !EasyLock - Nozzle: Power nozzle with 25° fan jet. High-pressure flat spray for outstanding area performance and excellent dirt removal efficiency.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 5 672 h, kėlimo aukštis: 4 860 mm, stiebo tipas: triplex, galia: 29 kW (39,43 AG), variklių gamintojas: Volkswagen, bendras aukštis: 2 200 mm, bendras ilgis: 2 600 mm, bendras plotis: 1 180 mm, spalva: kitas, Įranga: oro kondicionavimas, sėdynės šildytuvas, Pagaminimo metai: 2020 Tuščias svoris: 3 810 kg Kėlimo galia: 2 000 kg CE žymėjimas: taip Techninė būklė: labai gera Optinė būklė: labai gera Pavaros sistema Laipsnis / Tarša: Stage IV / Tier IV final Bendra informacija Gaminto šalis: Vokietija Būklė CE tipas: CE Šoninis poslinkis ir 4-asis vožtuvas, stogo apsauga, oro kondicionierius Kdjdpfxex Hawps Af Ijg

Gamybos metai: 2023, Sąlyga: beveik kaip naujas (naudotas), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [min⁻¹]: 10–192 Screw: nitrided Torque: 55 Nm Drive: Three-phase motor with frequency inverter Drive power [kW]: 1.1 kW Cylinder material: nitrided Electrical connection: 3 / N / PE Supply voltage [V]: 400 V at 50 Hz Control voltage [V]: 24 V Ceramic heating bands [W]: 1200 W Number of heating bands: 3 Max. throughput: approx. 5 kg/h Kjdpoq R Tkwefx Af Iedg Max. processing temperature [°C]: 300

Sąlyga: naudotas, rida: 180 493 km, galia: 120 kW (163,15 AG), kuro tipas: dyzelinas, pavaros tipas: mechaninis, pirmoji registracija: 06/2018, emisijos klasė: Euro 6, spalva: juodas, sėdimų vietų skaičius: 20, Įranga: ABS, autonominis šildytuvas, oro kondicionavimas,

Sąlyga: geras (naudotas), Gamybos metai: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from custom production at a renowned German mechanical engineering company. CE compliant! Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Specifications Working area Travel in X/Y/Z axes: 135 / - / 590 mm Distance between centers: 650 mm Center height: 140 mm Main spindle Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Kedpsxyvbnjfx Af Iodg Tailstock Quill diameter: 30 mm Morse taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest model in the EMCOMAT series. It is a lathe designed for the highest demands, featuring stepless speed regulation, constant cutting speed, and an impressive 7.5 kW drive power (40% duty cycle). The compact powerhouse excels where maximum precision is required in minimal space, such as optical, electrical, and automotive workshops, laboratories, and even Formula 1 environments. For sale is an EMCO EMCOMAT 14 D lathe with Emco digital readout, manufactured in 2006. This lathe is in very good original condition and has only seen light use in a custom manufacturing environment. The control system is very user-friendly. The guides are regularly lubricated by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to inspect and test the EMCO EMCOMAT 14 D under power at our premises. You can find more lathes from well-known manufacturers on our website.

Sąlyga: geras (naudotas), Gamybos metai: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special production division of a renowned German mechanical engineering company. CE compliant! Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working Area Travel in X/Y/Z: 135 / - / 590 mm Distance between centers: 650 mm Center height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: Kdsdpfjxyvbbjx Af Isg 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. Designed for the highest demands, this lathe features infinitely variable spindle speed control, constant cutting speed, and an impressive 7.5 kW drive power (40% duty cycle). This compact yet highly capable machine is ideal wherever maximum precision is required in confined spaces, such as in optics, electrical, and automotive workshops, in laboratories, and even in Formula 1. For sale is an EMCO EMCOMAT 14 D lathe with Emco digital readout, year 2006. This lathe is in very good original condition. It comes from a facility where it was only occasionally used for special production. The control is very user-friendly. The guides are regularly lubricated via a central lubrication system. The EMCO EMCOMAT 14 D has undergone both a mechanical and electrical inspection by us. You are welcome to view and test the EMCO EMCOMAT 14 D under power on our premises. You can find further lathes from renowned manufacturers on our website.

Sąlyga: geras (naudotas), Gamybos metai: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special machine construction department of a renowned German mechanical engineering company. CE-compliant! Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working Area Travel in X/Y/Z: 135 / - / 590 mm Distance between centers: 650 mm Kodpfx Aexyvaqof Iodg Center height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest standards: with infinitely variable speed control, constant cutting speed, and an impressive 7.5 kW drive power (40% duty cycle). This compact powerhouse is found wherever maximum precision is required in limited space—such as optical, electrical, and automotive workshops, laboratories, and even in Formula 1 applications. For sale: EMCO EMCOMAT 14 D lathe with Emco digital readout, year 2006. This lathe is in very good original condition. It comes from a facility where it was only lightly used for special projects. Very easy-to-use control. The guideways are automatically lubricated via central lubrication. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our location. More lathes from renowned manufacturers can be found on our website.

Sąlyga: naudotas, Ferwood code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested, we offer overhaul service, please contact us. Kedpfsu U D N Uex Af Isdg

Sąlyga: naudotas, Gamybos metai: 1998, x eiga: 1700 mm y eiga: 400 mm z eiga: 400 mm Stalo tvirtinimo plotas: 2x 1100 x 420 mm Stalo apkrova: 500 kg Įrankio tvirtinimas: SK 40 Valdymas: Sinumerik 810 D Siemens Veleno apsukų diapazonas: 30 - 6000 aps./min. Įrankių keitiklis su 20 vietų Padavimo greitis: 1 - 30000 mm/min Greitiejimo eiga x / y / z ašis: 30 / 30 / 30 m/min Bendras galios poreikis: 20 kW Staklių svoris apie 5 t Užimamas plotas apie 3,8 x 2,8 x 3,1 m Kdjdpfexddq Sjx Af Isg 3 ašių vertikalus apdirbimo centras Hedelius, modelis BC 40 D/20 su Siemens Sinumerik 810 D valdymu. Prekė yra naudota, todėl parduodama be jokios garantijos. Sandėliuojantis pardavėjas su 1600 m² parodų sale.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: WSK00000001246641, ašių konfigūracija: 3 ašys, pirmoji registracija: 08/2009, pakaba: oras, padangos dydis: 385/65, padang padangų: 40 procentas, spalva: kitas, Gamybos metai: 2009, Įranga: ABS,

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1997, Max. workpiece length: 3600 mm, max. workpiece width: 1400 mm, length: 8750 mm, width: 5250 mm. Kdjdpfx Afoqvnl Ts Iog

Sąlyga: naujas, Load capacity 20 t Workpiece diameter 150 - 3800 mm Drum diameter 350 x 150 mm Feed rate 100 - 1000 mm/min Total power requirement 2 x 1.1 kW Features • Electronic components from Siemens/Schneider/Delta Kdodpfx Aof Ep Dmof Ieg • Frequency-controlled speed of the drive unit • Running rollers: steel/rubber • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Remote control with cable • Double foot pedal • 3-year warranty (see warranty conditions)