Emco Bs 3 pirkti naudotą (142)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2016, veikimo valandos: 290 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: F1F 161101, X ašies eiga: 190 mm, Y ašies eiga: 140 mm, Z ašies eigos atstumas: 260 mm, veleno greitis (maks.): 3 500 aps./min, stalo plotis: 125 mm, stalo ilgis: 420 mm, sukimosi greitis (maks.): 14 000 aps./min, Milling machine including engraving spindle unit and 4th axis as well as automation-ready configuration! The machine was used for training purposes and has only approx. 290 spindle hours. TECHNICAL DETAILS Travel X-axis: 190 mm Travel Y-axis: 140 mm Travel Z-axis: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance spindle nose – table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling Table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots acc. to DIN 650: 2 pcs., 11 mm T-slot spacing: 90 mm Milling Spindle Drive Three-phase asynchronous motor output: 0.75 kW Speed range (infinitely variable): 150 – 3,500 rpm Max. torque: 3.7 Nm Engraving spindle unit speed: 14,000 rpm Tool Changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with / without changer: Ø 40 / 60 mm Feed Drive Precision thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 – 2 m/min Average positioning deviation: 0.008 mm MACHINE DETAILS Nsdpfx Abov Ip Izsmsdc Footprint (W x D): 960 x 1,000 mm Overall height: 980 mm Total weight incl. tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D-View simulation - 8-position tool changer with pick-up system and air-blow device - Electronic handwheel - Swivel table with pull-out keyboard tray - 72 mm pneumatic vise - 4th axis with 3-jaw chuck - Engraving spindle unit (4:1 reduction) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and clamping nut - Pneumatic door automation and clamping devices - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, Machine available IMMEDIATELY with extensive accessories ex works Mayrhofen, to be sold to the highest bidder. Ndsdsnk Uabopfx Abmoc

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 450 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 350 mm, X ašies padavimo greitis: 4 m/min, Y ašies padavimo greitis: 4 m/min, padavimo greitis Z ašis: 4 m/min, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 20 aps./min, bendras aukštis: 1 690 mm, bendras plotis: 1 480 mm, bendras ilgis: 1 500 mm, stalo plotis: 400 mm, stalo ilgis: 800 mm, įvesties srovės tipas: trifazis, stalo apkrova: 400 kg, bendras svoris: 1 500 kg, įėjimo įtampa: 380 V, ruošinio svoris (maks.): 400 kg, įėjimo srovė: 16 A, įėjimo dažnis: 50 Hz, frezavimo ilgis: 450 mm, Įranga: dokumentacija / vadovas, The machine is complete with all accessories and tools. Three-axis digital readout by Heidenhain. X-axis travel: 450 mm Y-axis travel: 300 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Table load capacity: 400 kg Spindle speeds: 2500 rpm X-axis feed rate: 0–4000 mm/min Y-axis feed rate: 0–4000 mm/min Z-axis feed rate: 0–4000 mm/min Dimensions (approximate): Length: 1500 mm Ndodpfxownya Tj Abmjc Width: 1480 mm Height: 1690 mm Weight: 1500 kg

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), Digital display: Heidenhain. Traverse paths: Longitudinal (X-axis) travel: 450 mm Cross (Y-axis) travel: 300 mm Vertical (Z-axis) travel: 350 mm Clamping surface: 800 x 400 mm Tool holder: SK 40 Quill stroke: 100 mm Swiveling vertical milling head: ±90° Ndedsnab A Nspfx Abmec Speed range: 50–2500 rpm Machine dimensions: Length: 1,485 mm Width: 1,475 mm Height: 1,475 mm Approx. weight: 1,500 kg

Sąlyga: reikia remonto (naudotas), Gamybos metai: 2008, veikimo valandos: 9 000 h, Funkcionalumas: neveikiantis, mašinos/transporto priemonės numeris: R65EW1851, tekėjimo ilgis: 520 mm, sukimosi skersmuo virš skersinio stumduko: 360 mm, tekėjimo skersmuo: 600 mm, X ašies eiga: 210 mm, Z ašies eigos atstumas: 610 mm, sukimosi greitis (maks.): 4 200 aps./min, No reserve price – guaranteed sale to the highest bidder! Agile and precise machine with extensive accessories, driven tools, and a collet chuck with various collets, including square and hexagonal types. Condition: Used machine, previously operated in Thailand. Due to the local climate, the machine shows external signs of wear. The pneumatic system exhibits wear and tear, particularly from the manifold onwards: brittle hoses, some broken. Hose allocation from the distributor valve is not possible without a schematic. Pneumatic repair is required. TECHNICAL DETAILS Swing diameter over bed: Ø 600 mm Swing diameter over cross slide: Ø 360 mm Distance main spindle (mounting flange) to tailstock center: 680 mm Ndodpfx Aevrz A Ssbmjc Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Axes Travel Travel X axis: 210 mm Travel Z axis: 610 mm Main Spindle Spindle connection per DIN 55026: KK 6 Spindle outer diameter at front bearing: Ø 100 mm Spindle bore: Ø 73 mm Hollow clamping cylinder with draw tube, max. through-hole: Ø 66.5 mm Max. chuck size: Ø 250 mm AC motor, power (100%, 60% duty cycle): 15 / 18 kW Speed range (infinitely variable): 60 – 4,200 rpm Max. torque: 192 Nm Tailstock Automatic tailstock: hydraulically actuated Tailstock stroke: 500 mm Max. tailstock force: 8,000 N Traverse speed: 20 m/min Internal taper of tailstock quill: MT 4 Feed Drives Rapid traverse speed X/Z: 24 / 24 m/min Feed force X: 5,000 N Feed force Z: 7,000 N Acceleration time from 0 to rapid traverse: 0.2 s Position repeatability (per VDI 3441 in X/Z): 3/5 µm C-Axis (Spindles 1 and 2) Rotary axis resolution: 0.001° Rapid traverse: 1,000 rpm Spindle indexing (disc brake): 0.01°

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), Siemens 840D control system – Chop Mill – Ethernet card Recently replaced spindle X-axis travel: 2000 mm Y-axis travel: 800 mm Njdpfel Dr D Uex Abmjdc Z-axis travel: 700 mm Spindle speed range: up to 30,000 rpm Coolant-through-spindle (CTS) 30 bar pressure with two 60-micron metal filters Electronic handwheel Linear scales Pressurized optical encoders for X and Y axis movement control Chip conveyor Coolant gun

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2015, veikimo valandos: 272 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S4E150081, tekėjimo ilgis: 510 mm, sukimosi skersmuo virš skersinio stumduko: 300 mm, X ašies eiga: 160 mm, Z ašies eigos atstumas: 510 mm, sukimosi greitis (maks.): 6 300 aps./min, tekinimo skersmuo virš slankiojančio stalo: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control system: Siemens Sinumerik Operate Travel Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Drawtube / spindle bore diameter: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (internal diameter): Ø 80 mm Drive power: 8 / 13 kW Tool changer Number of tool stations: 12 Toolholder shank: VDI 30 Tool cross section for square tools: 20 x 20 mm Boring bar shank diameter: Ø 32 mm Number of driven tools: 6 pcs Torque: 16 Nm Drive power: 4 kW Nedpfov Imzfex Abmedc Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in X-axis: 4,000 N Feed force in Z-axis: 6,000 N Positioning accuracy Ps (to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact pressure: 6,000 N Internal taper for live center: MT 4 MACHINE DETAILS Spindle hours: 272 h Center height above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant unit: 250 l Pump capacity at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - Emco LM800 bar feeder - Hollow clamping cylinder including draw tube - Machine lamp - Coolant unit - Electronic handwheel - Cleaning gun / Multiflow - Automatic pneumatic parts catcher - Fully automatic machine door - Chip conveyor - Comprehensive tool set - Three-jaw chuck

Sąlyga: naudotas, Gamybos metai: 1999, Technical details: Ndjdpfeu Ixw Aox Abmec Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Turning length: 700 mm Distance between centers: 700 mm Spindle speeds: 55 - 2350 rpm, 8-step mechanical Spindle bore: 50 mm Tailstock quill travel: 120 mm Tailstock quill taper: MT3 Spindle torque: 350 Nm Max. workpiece weight – overhung: 50 kg Total power requirement: 3.0 kVA Machine weight approx.: 0.79 t Machine dimensions approx. LxWxH: 1.6 x 0.9 x 1.4 m 3-jaw chuck Forkardt Ø 200 mm (external clamping) Longitudinal slide travel X-axis: 600 mm; longitudinal feed 0.045 – 0.787 mm/rev in 20 steps; metric threads Cross slide travel Y-axis: 220 mm; cross feed 0.023 – 0.406 mm/rev in 20 steps Compound slide swivels right 60° and left 120° Thread cutting Machine lighting No coolant supply (pre-installed for retrofitting) Accessories: 3 sets of turning jaws 3x Multifix tool holders 2x drill chucks 1x live center 3 machine leveling feet

Sąlyga: naudotas, Gamybos metai: 2007, Technical Details: Nedpfxowxvbzj Abmedc Turning diameter: 220 mm Turning length: 310 mm Total power requirement: 17 kW Approx. machine weight: 3.3 t Space requirement approx.: 2.25 x 1.63 x 1.94 m Swing diameter over bed: 430 mm Bar capacity: 45 mm Distance between centres: 687 mm Cross slide travel (X-axis): 160 mm Longitudinal slide travel (Z-axis): 310 mm Spindle speeds - stepless: 0-6,300 rpm

Sąlyga: naudotas, Gamybos metai: 2013, Technical Details: Ndedpfx Abophuwqsmec Bar Diameter: 65 mm Turning Length: 644 mm Swing Diameter over Bed: 600 mm Swing Diameter over Cross Slide: 430 mm y-Axis: 100 (+-50) mm Spindle Speed: 2x 5,000 rpm Indexing per: 2x C-axis, 0.001° Sub-Spindle: yes Turret (positions): 2x 12 VDI 30 positions Driven Tool Stations: 2x 12 positions Driven Tool Speed: 2x 4,000 rpm Control: FANUC 18 iTB Total Power Requirement: 30 kVA Machine Weight approx.: 8 t Space Requirement approx.: 3.5 x 2.5 x 2.3 m CNC turning center with sub-spindle and Y-axis (upper slide), water-cooled spindles, high-pressure coolant system 2 x 14 bar, collet chuck on main and sub-spindle, bar feeder magazine ENTL 10-65, chip conveyor, extensive accessories, approx. 54,500 power-on hours, approx. 30,500 automatic hours, approx. 14,000 feed hours

Sąlyga: naudotas, Gamybos metai: 2000, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm Ndsdpfsu Ixwijx Abmoc CNC control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter at front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill taper: MK4 Tailstock stroke: 500 mm (travel) Main spindle power: 7.5 kW (100% duty cycle = 11 kW) Electrical configuration – voltage/frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe is equipped with a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders are installed in the magazine, 4 of which are collet holders Coolant system, coolant supply through turret Control cabinet with cooling, Rittal Type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool as per description.

Sąlyga: naudotas, Gamybos metai: 2001, Technical specifications: Ndjdpfx Asw Dudxsbmjc Swing diameter: 220 mm Turning length: 700 / 665 mm Total power requirement: 17 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.63 x 1.98 x 1.94 m Swing diameter over bed: 430 mm Max. workpiece length: 510 mm Cross slide travel (X-axis): 160 mm Spindle bore diameter: 45 mm

Gamybos metai: 1982, Sąlyga: naudotas, Technical Details: Z-axis travel: 260 mm Maximum test force: 49 - 7355 N (test load) Test height: 260 mm Nodpfx Aju N Avxsbmsdc Maximum specimen weight: 160 kg Throat depth: 200 mm Interface: RS 232 Power supply: 230V / 50Hz Total power requirement: 200 VA Machine weight approx.: 250 kg (without base cabinet) Machine dimensions (LxWxH) approx.: 0.7 x 0.6 x 1.8 m (with base cabinet) The hardness testing machine, configured for depth measurement operation, is offered for sale complete with a base cabinet (manufactured by Emco for hardness testing machines). The equipment is suitable for the following testing methods (manufacturer specifications): - Metals: Brinell, Vickers, Rockwell - Plastics: according to DIN 53 456 - Other materials: testing only after consultation with the manufacturer Test loads: electronically controlled via microprocessor, strain gauge and DC motor (M4R-075): 49 to 7355 N Test table: height adjustable via handwheel, table diameter 90 mm Test table receptacle according to DIN 51 225: 25 mm diameter Operation and programming via control panel with graphics-capable, illuminated LC display Accessories: - Additional test tables/plates similar to those shown in the photo - as per photo

Sąlyga: naudotas, Gamybos metai: 2000, Technical details: Turning diameter: 360 mm Turning length: 520 mm Total power requirement: 20 kW Machine weight approx.: 3.8 t Space requirement approx.: 3 x 2 x 2 m Ndjdpfewxvclex Abmsc

Sąlyga: naudotas, Gamybos metai: 2008, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse on X-Y-Z axes: X/Z: 30 m/min / Y: 12 m/min C-axis rapid traverse speed: 1000 rpm Ndodpfx Abjvvtpxjmjc Tool turret - number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical system - voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions (LxWxH) approx.: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions (LxWxH): approx. 2.9 x 0.6 x 0.55 (0.38 t) m Chip tray dimensions (LxWxH): approx. 1.6 x 1.3 x 0.25 (0.2 t) m Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features C-axis, E-axis, Y-axis, and W-axis. Driven tools possible in all turret stations. Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooling unit Including hinged belt chip conveyor Chip tray Compressed air gun Note: The machine is offered WITHOUT any chucks as shown!

Sąlyga: naudotas, Gamybos metai: 1990, Technical details: X-axis travel: 185 mm y-axis travel: 95 mm z-axis travel: 200 mm Control: emco tronic TM02 Spindle mount: SK 30 Speed range: 10 - 4000 rpm, stepless Feed rate, stepless: 1 - 2000 mm/min, stepless Rapid traverse: approx. 3.0 m/min Tool turret - number of stations: 10 Interface: RS 232 Table size: approx. 420 x 125 mm Total power requirement: 0.8 kW Nsdpfovc Awrsx Abmedc Machine dimensions (LxWxH): 2.1 x 0.9 x 2.0 m Control panel EMCOTRONIC TM 02 Operating modes: Manual operation and/or automatic Coolant system (with supply to milling spindle) Operation via control panel mounted on 3 swivel wheels Pneumatic door guard

Sąlyga: naudotas, Gamybos metai: 1995, Technical details: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table area: 800 x 400 mm Spindle speed range: 63 – 3150 rpm / 18 steps Infinitely variable feed X/Y/Z: 8 – 800 mm/min / 8 steps Spindle taper: SK 40 Spindle head swivel left and right: 90° Quill stroke: 105 mm Total power requirement: 5.3 kW Machine weight approx.: 2245 kg Ndjdpfxsvbhcde Abmec Machine dimensions (LxWxH): 2.1 x 2.8 x 1.9 m Screen control replaced with new LCD. The milling machine is equipped with a PROTOTRAK MX2 digital readout system. X and Y axes can run cycles (interpolate), Z-axis is manually operated. Spindle with clockwise/counterclockwise rotation Automatic tool clamping via control command Coolant device (without reservoir) Chip collection tray Assorted tooling (as shown in the photo)