Dvipusis Krašto Anleimen Mašina pirkti naudotą (38 366)

Būklė: labai geros būklės (naudotas), Double-sided solo machine (or 1st and/or 2nd machine in a machine line) Roll material (edge) thickness (min/max) mm: 0.3 / 3 – Edge thickness in strips / tapes max. mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 (master & slave) Safety and soundproof cabins FORMATTING AREA (for each side): - Protection cutter (pre-milling): 75.186 (1 x 4.4 kW) - Planing unit (2 x 6.6 kW) max. 35 m/min - Jointing cutter unit: 75.186 (1 x 4.4 kW) EDGE BANDING SECTION (for each side): - Gluing unit (P.U.R. glue + premelter): VTG 3-24 + 283.203 - Pressure zone + edge magazine for rolls (slot no. 24) - End trimming unit: 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) - Pre-milling/milling unit: 08.055 (2 x 1 kW) 0°-30° (30 m/min) - Multifunction unit (radius and contour trimming unit): MFA 08.342 (2 x 0.66 kW) SERVO max. 20 m/min OPTIONAL: KFA 30 - Profile scraping unit: 08.519 Dkodpfx Aijxggzlj Sen - Flat scraping unit: 08.521 - Spraying unit (for polishing liquid) - Buffing unit: 08.604 (0.25 kW x 4) - 2 x standard milling units for grooving/rebating (1 x left + 1 x right) 08.190 (4.5 kW x2) 90°/180°/270°

Būklė: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Dsdpfx Aied Nuu Ho Sekn Control system: ICOS open TS Feed speed m/min (adjustable) 4 - 20 Top pressure: driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and profile milling unit) 08.342 (2 x 0.66 kW) servo Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Būklė: labai geros būklės (naudotas), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edging material (edge) thickness (min/max) mm: 0.3 – 3 Dsdpfx Aiou Tg Uqs Sokn Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam spacing (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling): AS 10 (5.8 kW) - 2 x Chipper DT 10 (5.8 + 5.8 kW) - Spray system (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt Glue + Pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (No. 6 positions) - End trimming unit IT 90-S (0.3 kW x2) 28 m/min, 0 - 25°, PNEUMATIC - Multi-profile milling unit (CNC controlled) RF 30 (0.65 kW x2) 0 - 25° - Multifunctional unit (radius milling and contour milling unit) AR 80 (0.3 kW x2) 25 m/min – ROTAX - Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraping unit (CNC controlled) RB 30 Flat scraper unit RC 20 – spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x2) With 'hopper' for panels (usable height mm 80), serves as buffer to accelerate work cycles

Būklė: labai geros būklės (naudotas), SINGLE-SIDED EDGEBANDING AND FORMATTING MACHINE (LEFT) "SOFTFORMING" Edge Material (Rolls) Thickness (min/max) mm: 0.4 / 3 Panel Thickness (min/max) mm: 8 / 60 Control / Software: PC 22 / WoodCommander Feed Speed (adjustable) m/min: 10 - 40 Side Adjustment Aggregate Carrier Manual mm: 30 - 80 FORMATTING OPERATIONS: Spray Device (for liquid anti-adhesive) Double Pre-milling Unit KD 10 (2 x 6.6 kW) Milling Unit for Softforming (2 x 1.85 kW) 0°-20° Sanding Belt Unit for Straight Edge KS 10 (mm 120 x 2100) Free Space (mm 700) EDGEBANDING SECTION: Gluing Unit (Hot Melt Glue + Pre-melter) E34 softforming Pressure Roller Track G (revolver with 4 positions) for Straight and Shaped Edges (softforming) with Top/Bottom Trimming Saws (In-Lay) Edge Magazine for Rolls E3 (compartment No. 6) Djdpfxet N H Tao Ai Sjkn End-cutting Unit HL 84 (2 x 0.8 kW) 0°-30° (max 25 m/min) 1st Milling Unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) 2nd Milling Unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) Universal Milling Unit for Grooving/Rebating and Profiling UF11 (1 x 4 kW) 0°-90° Profile Scraper Unit PN20 (Pneumatic) Finishing Unit (Flat Scrapers + Polishing Unit) FA11

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED EDGE BANDING MACHINE - Edge thickness (coil) min/max: 0.3 - 3 mm - Workpiece thickness (panel) min/max: 12 - 40 mm - Working width (min/max): 250 - 2500 mm - PC control system: PC22 - Top pressure system with driven rubber belts - Adjustable linear stop; feed speed: 10–32 m/min - Liquid glue unit - Jointing milling unit (vertical spindle moulder): 2 x 4 kW at 9,000 rpm Dksdpfx Aiswk Hp To Sjn - Quickmelt hot-melt adhesive unit A3 - Pressure zone C (manual adjustment) "A" - Roll holder for 2 rolls - End trimming unit: HL 84 (2 x 0.22 kW at 12,000 rpm) - Pre-milling unit (2 x 0.4 kW at 12,000 rpm) - Finishing unit (scraper + buffing unit): FA11 - Polishing unit

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 Dkodpfx Aji Hn Srji Sen End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Būklė: labai geros būklės (naudotas), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMATTING AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edge material (rolls) thickness (min/max) mm 0.3 / 3 Control/software ICOS Open (Batch Size One) Feed rate (adjustable) m/min 6 - 30 Fully automatic panel infeed system for formatting A1 / 15 No. 2 jointing milling units, NC controlled 08.378 (4 motors x 4.5 kW) Gluing unit (Hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Pre-milling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (NC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine trimming) NC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multiple profile scraper unit (NC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating and profiling 08.190 (3 x 4.5 kW) NC controlled - 90°/180°/270° M.03) FEEDING AND STACKING SYSTEM "SIRIO" Dedpfx Aiokt Uuao Sekn

Būklė: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable positioning stops, spacing (mm): 1000 FORMATTING UNIT (per side): Protection cutter (pre-milling) (1 x kW 4.5) Chip removal unit KD 11 (2 x kW 6.6) Jointing and trimming unit UF 20/S2 (2 x kW 4) EDGE BANDING SECTION (per side): Bonding unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA/PU glue) Edge magazine for rolls (compartment no. 2) Edge pressure zone (CNC-controlled) Type A End trimming unit HL 84 CHAMFER/STRAIGHT (2 x kW 0.22) Feed speed 25 m/min Pre-milling unit BF10 (2 x kW 0.55) Multifunction unit (radius milling and contour milling unit) FK11 (2 x kW 0.4) Multi-profile scraper unit (CNC-controlled) MN 21 Dksdpfx Ajuhv R Dei Sen Finishing unit (flat scraper + polishing unit) FA 11. Spray unit (for polishing liquid) No. 2 universal milling units for grooving/rebating and profiling SF20 (2 x kW 6.6) Powered panel infeed roller conveyor with singling system "HOMAG" Model POWER TBL 100/20/25.

Būklė: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edgeband Material (edges) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / SINITRA Software Feed Speed (variable) m/min: 10 – 40 (INVERTER CNC) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Djdpfx Aiou Rc Ano Sekn - Safety milling cutter (pre-milling) AS 10 (5.8 kW) pneumatic - 2 x Chipper cutters DT 10 (5.8 + 5.8 kW) - Spraying device (for liquid non-stick agent) EDGE BANDING UNIT (for each side): - 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) - 2nd Gluing unit (pre-melter with hot air) Air Force System - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) - End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 – 25° - Pre-milling unit RS 10 (2 x 2 kW) - Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 – 25° - Multifunctional unit (radius milling and contour milling) AR 80 (0.65 kW x 2) 25 m/min ROTAX. Revolver 8+8 stations (max. 25 m/min) - Motors with automatic tool change (tools) - Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) - Flat scraper unit RC 20 + spraying units (for polishing fluid) - Buffing unit SZ 30 (0.37 kW x 2)

Būklė: labai geros būklės (naudotas), Double-sided – First machine in a processing line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness with rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system: PC Base Windows / Software PC / SINTRA Feed speed (adjustable) m/min 10 – 40 (C.N. INVERTER) FORMAT PROCESSING (per side): Spray unit (for liquid release agent) No. 2 hoggers DT 10 (5.8 kW x 2) Empty space EDGEBANDING SECTION (per side): 1st gluing unit (Hot Melt + premelter) SP 30 (High Melt + Edge Control EC 40) 2nd gluing unit (premelter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 universal milling unit for grooving/rebating/profiling EB 60 (1 x 5 kW) - ISO 30 motor Dodpfx Aou Rc Hyei Sjkn Multi-profile scraper unit (CNC controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Būklė: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open compact Feed speed m/min (adjustable) 6 - 30 Top pressure belt-driven, spraying unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable guide fence CNC-controlled. Panel infeed system Barcode reader Jointing milling unit with CNC control 08.379 (2 x 4.0 kW) Radiator for edge heating of workpieces Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressing zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (compartment no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spraying unit (for sliding liquid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617 (0.18 kW x 4). Open space Universal milling unit for grooving/rabbetting and profiling 08.190 (4.5 kW x 1) Dksdpfxoltmnlj Ai Sjn

Būklė: labai geros būklės (naudotas), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE INSERT FOR LOT 1 Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control ICOS open Feed speed m/min (adjustable) 7-35 Top pressure belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled. Panel infeed system A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartment no.) 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m / min Pre-milling unit 08.0555 (1 kW x 2) Dedpfx Aijifnzdo Sskn Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Sprayer unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Būklė: naudotas, Gamybos metai: 2008, Naudota mašina Pagaminimo metai: 2008 Būklė: šiuo metu vis dar gamyboje Įranga ir techniniai duomenys: Kantavimas maks. 8-55 mm Įskaitant pasukamą valdymo pultą Aukšto dažnio (HF) sujungimo agregatas, 2 varikliai Įskaitant greitai kaitinamą, keičiamą, teflonu dengtą klijų vonelę Elektroninis spaudžiamųjų volelių padėčių nustatymas Įskaitant pasukamą dvigubą galinimo pjūklų agregatą Įskaitant apipjovimo frezavimo agregatą Įskaitant automatiškai valdomą nuožulų, spindulio ir kampų kopijavimo agregatą su nestingo paketu Įskaitant spindulio grandymo peilį su nestingo paketu Įskaitant plokštumos grandymo peilį Įskaitant griovelio agregatą Įskaitant šlifavimo agregatą Įskaitant purškimo vienetą Dksdpfx Ajw Nadgei Son Prieinamumas: greitu laiku Sandėlio vieta: Flörsheim

Būklė: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Bag sealing: - Flat bags. - Doypack pouches (stand-up pouches). Zipper integration: - Ability to seal all types of zipper closures. Advanced finishing options: - Punching of holes, handles, and easy-open features. - Rounded corners for improved aesthetics and safety. Branson ultrasonic technology: - Ultrasonic sealing of zippers for ensured precision and durability. Additional equipment: - Built-in screw compressor (10 bar). Dkodpfx Aisvdptce Sjn - Chiller for the cooling station to ensure efficient cooling of bottom and zipper seals. Technology and modular design: - The machine’s modular design allows adaptation to various film types, including laminated and co-extruded films, while maintaining high precision and process repeatability. - Servo technology provides excellent control of film tension and sealing time, resulting in outstanding product quality and consistency. Bag types produced with the Vegaplus bag system: - Three-side seal pouches. - Zipper pouches. - Doypack pouches (stand-up pouches) from a single web or with a separately inserted bottom gusset. - Retort pouches with rounded corners (without notch). - Side gusset pouches with zippers.

Būklė: naudotas, Edge Banding Machine Sumbel Perkeo Year of manufacture: 2014 - Serial No. 40050 Maximum working width: 60 mm Cold glue system -- as new condition -- Dkedpfx Aiewgdw Te Sjn Online video inspection possible via WhatsApp, MS Zoom, or Telegram In stock in Emskirchen/Nürnberg - Available immediately - Machine can be tested

Būklė: naudotas, mašinos/transporto priemonės numeris: 12, Edge Banding Machine Jagenberg KAM 60, Serial No. 12.30124/11 - Maximum working width: 60 mm - Cold glue system Online video inspection possible via Skype video. Dkjdpfx Aiek Tu Eks Sjn We would be pleased to welcome your visit – more machines available in stock. Available immediately – inspection possible. Located in Emskirchen/Nuremberg – machine can be tested.

Būklė: naujas, Gamybos metai: 2025, Our drying tunnels are available, among others, in a longitudinal version (for surface spraying machines) and a transverse version (for profile spraying machines and coating machines). Further details at a glance: - Longitudinal tunnel processing sizes: Standard: 1300 x 205 mm (W x H) Up to: 1800 x 205 mm (W x H) - Cross oven processing sizes: Standard: Length: 800-6,100 mm / Width: approx. 10-300 mm Other dimensions available upon request All modules arrive at your premises fully assembled and are ready for operation once electricity, water, and exhaust air connections are established. For recurring tasks, programs can be saved—this makes setup extremely quick and easy. We also offer automation technology, such as stacking of finished components, and more. To ensure the successful integration of your new oven system, we offer the following services: • Demonstration service: By arrangement, you can view our oven systems in operation at a reference customer’s site and receive their feedback. • Joint on-site commissioning together with your staff is always a standard part of our offer. • Comprehensive user manuals and supplementary documentation are included. • Expert technical support via phone and email. • Spare parts supply is ensured for decades, as all components are manufactured by Ceetec in Denmark. Dkjdoffc Ufspfx Ai Sjn Interested? Request your personalised quotation today. We are also happy to visit you in person on site to provide the best possible consultation. Delivery time upon request. The oven will be manufactured for you according to configuration and order.

Būklė: reikia remonto (naudotas), Motorized edgebander Hyllus model 300 Robur, used, in need of overhaul but operational maximum edging thickness: 3 mm groove depth: 450 mm center distance between shafts: 100 mm Dedpfx Aewakguji Sjkn

Būklė: labai geros būklės (naudotas), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING LINE (Right-handed) Comprising the following machines: Dkjdpfsinigmox Ai Sen M.01) INFEED TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDER (RIGHT-HANDED) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control/software: PC 22 Feed speed (adjustable) m/min 18 - 32 Panel infeed system WZ 14/30 Jointing unit with CNC control (2 x 3 kW) DOUBLE glue application unit (PUR glue + pre-melter) 2 x PU 34 Pressure zone (CNC-controlled) - Edge magazine for rolls (12-fold) End trimming unit WK13 (CHAMFER/STRAIGHT automatic adjustment) Pre-milling unit (2 x 0.55 kW) pneumatic adjustment Multi-profile milling unit (CNC-controlled) MF 21 (2 x 0.55 kW) Copy milling unit FF 32 (4 x 0.4 kW) with automatic changer Contour milling unit (for fine milling) CNC-controlled FK 31 (30 m/min), recently added following a technological overhaul Multi-profile scraper unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scraper + buffing unit) FA 11 Universal milling unit for grooving/rebating and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Būklė: labai geros būklės (naudotas), Double-sided FORMATTING AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Roll material (edge) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Dsdpfx Aijywk Elo Sokn Working width (min/max) mm: 240 - 2700 Control system/software: SINITRA Feed speed (adjustable) m/min: 10 - 40 Cam spacing (mm): 500 FORMATTING UNITS (per side): Protective cutter (pre-milling) AS 10 (1 x approx. 5.2 kW) 2 x hogging units DT 10 (2 x approx. 5.8 kW) Spray system (for liquid anti-adhesive) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) SP30 (High Melt + Edge Control EC40) Edge pressure section (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (2 x approx. 0.3 kW) 28 m/min (0° - 25°) Pre-milling unit RS 10 (2 x 0.75 kW) Multi-profile milling unit (CNC controlled) RF 30 (2 x 0.37 kW) 0°-25° Multi-functional unit (radius milling and contour processing) AR 30 (2 x 0.35 kW) Left: 2 x universal milling units for grooving/rebating and profiling FB 32 (2 x 5 kW) 0°- 90° Right: Universal milling unit for grooving/rebating and profiling FB 30 (1 x 5 kW) 0°- 90° Profile scraping unit RB 10 Flat scraping unit RC 10 - spray units (for polishing fluid) Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) Hot air blower - edge trimmer PH 10 OPTION: D.O.M. stacker with support column and mobile jib (with vacuum suction pads) for unloading and stacking of edge-processed panels.

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Edge Sanding Machine Volpato LVO 120 Serial No.: 1929112 Year of manufacture: 1999 Manufacturer: LASM Volpato, Italy Compact Single-Side Sanding Center VOLPATO offers the LVO 120 sanding machine, featuring combined functions that can greatly facilitate the work of many professionals in the industry. It was developed under the guidance of the company’s experienced staff, who are passionately committed to achieving the best possible results. Vertical oscillating sanding machine 2.2 kW motor (3 HP) Tilting table 0–90 degrees Worktable dimensions: 880 x 370 mm Mechanically tiltable Additional support and "round" sanding discs Belt dimensions: 150 x 2580 mm Dust extraction unit Weight: 250 kg Overall dimensions: 700 x 1000 x 1150 mm CE marked Technical specifications are subject to change Dkjdpfx Aiovwdqce Sjn

Gamybos metai: 1999, būklė: geras (naudotas), Biesse Polymac ERGHO 5 Edge Banding Machine, Year of Manufacture: 1999 Biesse Italy S/N 80709 Maximum panel thickness: 10–45 mm Minimum and maximum edge band thickness: 13–60 mm Maximum edge banding material thickness (in rolls): 0.4–3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Feed speed (m/min): 10/20 Technical specifications: • Glue pot VC 700 • End trimming unit 701 • Edge trimming unit RS 700 • Corner rounding unit CR 200 • Tilting edge trimming & chamfering unit RI 700 Dkodpfxjgtx Aqe Ai Sen • Compact scraper blade RBK501 • Buffing unit SP700 • Edge sanding unit LV 700 Additional features: • Heated infeed guide • PLC control • Panel support guide • Large diameter roll holder • Edge trimming device for 3 mm thick roll edges 400 V, 50 Hz CE marked Machine dimensions (L x W x H): 4950 mm x 1700 mm x 1530 mm Weight: 2,900 kg

Būklė: naujas, Gamybos metai: 2024, stalo ilgis: 1 450 mm, stalo plotis: 500 mm, bendras svoris: 550 kg, įėjimo įtampa: 400 V, osciliacijos eiga: 20 mm, įėjimo dažnis: 50 Hz, Edge sanding machine OBS 150 ARCO. NEW. Sanding height 150 mm Oscillation stroke 20 mm Machine length 1450 mm Front side of the processing area is curved Table extension (adjustable) Rear side for straight processing. Table tiltable up to 45°. Motor power 2.5 kW, 2 speeds. Dsder Erhwepfx Ai Sjkn Sanding speed 11.5 and 8 meters/sec. Central extraction port Ø 140 mm. Sanding belt tensioned pneumatically. The machine is very suitable for stair manufacturers.

Būklė: naujas, Edge sanding machine Hoku KS 150 manufactured by Rehnen. The upper section is made of heavy cast iron with an integrated three-phase motor, 380 V, 2.2 kW, 2850 rpm; the machine is equipped with an integrated switch-plug combination; motor protection switch and main switch according to VDE standards; dimensions of the sanding belt support: 850 x 150 mm; steel table height adjustable via spring pressure; belt size: 150 x 2280 mm; the sanding belt support is lined with a graphite slip coating; the machine is supplied with an assortment of sanding belts; also included are an angle and mitre fence. When connected to a central extraction system with a minimum air velocity of 20 m/s, the machine is certified dust-tested (GS) by Holz-BG-Stuttgart. Dodewgc D Sepfx Ai Sskn - Swivelling 90-180° - Motorized belt oscillation - Small support table at the deflection roller - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt size: 150 x 2280 mm Sanding belt speed: 22 m/sec Table size: 750 x 350 mm Required space: 1000 x 800 mm Weight: from 180 kg Extraction connection Ø: 100 mm

Būklė: naudotas, Double-end profiler, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor - Power: 3.7 kW 2885 rpm at 50 Hz - Power: 5.2 kW 5870 rpm at 100 Hz - Voltage: 380 V - Shaft mount: Ø 40 mm - Tool: mm - Dimensions: 480/250/H150 mm - Weight: 36.5 kg Dkedpob A Tbfsfx Ai Son