Doli Ašių Gamintojas pirkti naudotą (6 354)

Sąlyga: geras (naudotas), Gamybos metai: 2020, veikimo valandos: 22 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2080594, X ašies eiga: 600 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 400 mm, veleno veikimo valandos: 9 500 h, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Fusing: 200 A gG (5 s) Weight Operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Position measurement system X/Y/Z: Direct, absolute X axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle configuration: Horizontal, twin spindles side by side Motor spindles, liquid cooled, synchronous drive Spindle diameter: 40 mm Tool holder: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel paths: - X axis: 600 mm - Y axis: 600 mm (optional 875 mm) - Z axis: 500 mm Workpiece Clamping / Table System Swiveling mounting with two separate rotary tables for mounting clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5″ Tangential moment: 4,500 Nm Caodsxt D Ezepfx Admea Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s Note The system is delivered without any product-specific tools, fixtures, or robot grippers.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Little used – from a school environment Machine No.: 55 Year of manufacture: 2000 Cjdpfx Aew D Hmlodmsaa Travels X: 400 mm Y: 320 mm Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate (X, Y, Z axes): 10 – 1000 mm/min stepless Rapid traverse (X, Y, Z axes): 1800 mm/min Quill adjustment: 60 mm Spindle motor power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque: Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power consumption: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Min. 45 mm Max. 595 mm Distance vertical spindle to table clamping surface: Min. 45 mm Max. 490 mm T-slot width: 14 H7 mm T-slot spacing: 50 mm Number of T-slots: 5 - CNC contouring control Heidenhain TNC 135 - 18 spindle speeds - Fixed angle table - Chip tray - Splash guard and chip shield - Coolant system - Central lubrication - Lighting - Heidenhain control - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Central lubrication for guideways and gearbox - Ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – School machine Low hours Location: Ex stock 54634 Bitburg Immediately available

Sąlyga: naudotas, Gamybos metai: 2017, X eiga: 750 mm Y eiga: 650 mm Z eiga: 560 mm Valdymas: 3D HEIDENHAIN TNC 640 Stalo dydis: 800 x 650 mm Sukamasis stalas: 650 mm Stalo apkrova: 600 kg C ašis: ° B ašis: -120/+120 ° Įrankio skersmuo: 840 mm Maks. įrankio aukštis: 500 mm Greitoji eiga: 40 000 mm/min Sukimosi greitis: 20 000 aps./min Tvirtinimas: HSK-A63 Sukimo momentas: 130/86 Nm Variklio galia: 35 kW Cjdpfxsxwzfte Admeaa Vidinis aušinimas: 40 bar Įjungimo valandos: 26 972 h Veleno valandos: 11 412 h Įrankių keitimo įrenginys: 60 pozicijų Vidinis aušinimas: 40 bar Bendras energijos poreikis: 49 kW Staklių svoris apie: 11 600 kg Naudotas 5 ašių apdirbimo centras DMG-Mori DMU 75 MonoBlock, pagaminimo metai 2017 - Talpa su 500 l popieriniu filtru - Aktyvus aušinimo valdymo skydas - Infraraudonųjų spindulių matavimo zondas Heidenhain - Blum lazerinis matavimo įrenginys - Drožlių išsiurbėjas - Valymo pistoletas su 2 bar 40 l/min siurbliu - 3D Quick Set - Nešiojamasis valdytojas HEIDENHAIN HR-510 *Gali būti apžiūrėta prijungta, puikios būklės

Sąlyga: labai geros būklės (naudotas), Denso Industrial Robot with Denso Controller We offer here a Denso industrial robot complete with Denso controller. Industries and Applications The VS-068 series provides high speed and performance in a compact, slim housing. In addition, numerous options are available that enable operation in a wide range of environments. Thanks to its high-speed performance, accuracy, and the wide selection of options available, the VS-068 can be deployed in almost any sector, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tools, medical devices and pharmaceuticals, plastics, and metal industries. Cajdpfokz Uzgsx Admsa The robot model is suitable for assembly, inspection, alignment, material handling, tending, packaging, palletizing, and custom applications. Denso 6-Axis Robot VS-068 with Denso Robot Controller 410200-2611 The compact model delivers exceptional performance and speed. Robot Model: VS068A4-AV6-C3N-ANNDN-NNNN Arm Reach: 710 mm Payload: 7.0 kg Cycle time: 0.31 sec Repeatability: ±0.02 mm Weight: 49 kg Year of manufacture: 2016 Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Condition: used Included in delivery: (See photo) (Specifications are subject to change and errors excepted!) Should you have any further questions, we are happy to assist by phone.

Sąlyga: naudotas, Gamybos metai: 2000, Tekinimo ilgis 1000 mm Maks. tekinimo skersmuo 640 mm Ø Maks. tekinimo diametras 540 mm Caodsp Ui N Hopfx Admoa Veleno anga 51 mm Ø Maks. veleno apsisukimai 4000 aps./min (taikoma ir subvelenui) Maks. frezavimo veleno apsisukimai 6000 aps./min Įrankių keitiklio stotys: 40 vnt Valdymas: PC Fusion 640 MT Įranga: Gantry krautuvas 10 vnt. įrankio laikikliai

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 4 500 aps./min, Offered for sale is a machining center from Deckel Maho, model DMU 50 M, featuring linear control and manual rotary axes. The machine is in excellent condition, fully functional, and ready for immediate use. Of particular note is the ability to operate with an open enclosure. Technical Data: - Year of manufacture: 2002 - Control system: Heidenhain TNC 124 - X-axis travel: 500 mm - Y-axis travel: 400 mm - Z-axis travel: 400 mm - Feed rate: 5,000 mm/min - Rapid traverse: 5 m/min - Tool holder: SK 40 - Clamping surface: Ø 700 x 500 mm - Rotary range: 360° (mechanical) - Swivel range: +90° / -15° (mechanical) - Max. load: 200 kg - Required space: 4,000 x 3,500 x 2,518 mm - Transport dimensions: approx. 2,500 x 1,520 x 2,200 mm - Weight: 2,600 kg Additional tool holders available on request. Transport and loading can be organized Europe-wide for an additional fee if required. All prices are net plus VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Cjdpfx Aou Unh Ijdmjaa Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Sąlyga: geras (naudotas), Gamybos metai: 2014, veikimo valandos: 48 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2080233, X ašies eiga: 600 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 400 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, CNC Control SIEMENS 840D Caedpfx Aext D Ebedmoa Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Power system: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Protection: 190 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X-Axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z-Axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindle side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool holder: HSK-A63 Lubrication: Minimal quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Working Area Spindle distance: 600 mm Travel: X-Axis: 600 mm Y-Axis: 600 mm (optional 875 mm) Z-Axis: 500 mm Workpiece Clamping / Table System OP1: Swivel support with two separate swivel tables for clamping bridges OP2: Double swivel carrier (Q-axis) with two directly driven NC rotary tables (A-/U-axes) Double-sided gearing on swivel carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5″ Tangential torque: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Sąlyga: naudotas, Gamybos metai: 2017, veleno greitis (min.): 12 000 aps./min, Machine type: CNC machining centre, vertical 5-axis Model: DMF260/11 linear Manufacturer: DMGMORI Control: CELOS Siemens 840D sI Operate Year of manufacture: 2017 Location: Germany Travelling paths X-axis approx. 2600 mm Y-axis approx. 1,100 mm Z-axis approx. 900 mm B-axis (head) ° Rotary table integrated: 1050 mm Table size approx. 3200 x 1100 mm Max. workpiece weight on rotary table approx. 1,200 kg Max. speed approx. 15,000 rpm Spindle motor approx. 46/30 kW Number of tool stations approx. 60 Rapid traverse approx. 80/60/60 m/min Tool holder approx. SK40 Power consumption approx. 143 kVA Machine weight approx. 28,000 kg Options: - Main spindle 15,000 rpm 46/30kW SK40 - Dynamics package (rapid traverse x/y/z: 80/60/60 m/min) - X-axis with linear drive - Separate electronic handwheel - 60-station chain magazine - Bed flushing via M-function - Through-spindle coolant (IKZ) pump, 40 bar - 600L coolant tank with paper band filter - Rotary table integrated in machine table - B-axis in the head - Automatic door - Coolant gun - Spindle probe - 2x Roto clear - Scraper belt chip conveyor Cajdpfjxw N A Tjx Admsa (Technical specifications and details subject to change and errors excepted)

Sąlyga: paruoštas naudoti (naudotas), Įrenginys yra visiškai veikiantis. Visos penkios ašys veikia vienu metu. Dėl papildomos informacijos prašome kreiptis per WhatsApp, el. paštu arba žinute per Machineseeker. Cajdpfxsxzvn De Admja

Sąlyga: labai geros būklės (naudotas), Mitsubishi Industrial 6-Axis Articulated Arm Robot Here we offer a Mitsubishi industrial 6-axis articulated arm robot. RV-Series Industrial Robot Compact and powerful, for flexible automation and high reliability. The RV series provides a highly dynamic 6-axis articulated arm robot for maximum quality. Model: RV-3SDB-S15 Number of axes: 6 Maximum payload: 3.5 kg Reach: 642 mm Weight: 38 kg Condition: used Scope of delivery: (See image) (Specifications and data are subject to change and errors excepted!) Csdogkg Eujpfx Admjaa For further questions, feel free to contact us by phone.

Gamybos metai: 2018, Sąlyga: beveik kaip naujas (naudotas), Dumeta welding positioner, hydraulically height-adjustable 500 kg load capacity, height-adjustable welding positioner with through-hole 100–200 mm Table diameter: 700 mm Cajdohua Dqepfx Admea Horizontal height: min. 0.6 m, max. 1.2 m Height when tilted: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 – 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust design

Sąlyga: naudotas, Gamybos metai: 2020, veikimo valandos: 23 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2630079, X ašies eiga: 800 mm, Y ašies eiga: 900 mm, Z ašies eigos atstumas: 650 mm, greitas poslinkis Y ašis: 120 m/min, greitasis eiga Z ašyje: 120 m/min, valdiklių gamintojas: Siemens, valdiklio modelis: 840D sl, ruošinio skersmuo (maks.): 1 830 mm, ruošinio svoris (maks.): 800 kg, sukimosi greitis (maks.): 40 aps./min, bendras svoris: 28 000 kg, veleno greitis (min.): 1 aps./min, veleno greitis (maks.): 17 500 aps./min, veleno veikimo valandos: 11 000 h, atstumas tarp velenų: 800 mm, ašies skaičius: 2, įrankių magazino lizdų skaičius: 84, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, This high-precision twin-spindle machining center of the SW series is designed for maximum productivity in high-volume manufacturing, particularly for the automotive and supplier industries. The machine features two symmetrically arranged motor spindles, a double NC swivel carrier, and two directly driven rotary tables, enabling simultaneous 5-axis machining and parallel processing. Equipped with a Siemens 840D sl CNC control, minimum quantity lubrication, high-dynamic feed drives, and an 84-position tool magazine, the system guarantees highly dynamic, precise, and energy-efficient machining processes. Its compact design and pick-up capable tool concept ensure short chip-to-chip times and high machine availability. This machine is ideal for demanding precision machining tasks such as housings, structural components, gearbox parts, and components made from aluminum, cast iron, and steel in large-scale production. CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network system: TN-S or TN-C network Total connected load: 152 kVA Power factor: 0.6 Fuse protection: 250 A gG (5 s) Weight Machine operating weight: 28,000 kg Transport weight: 24,500 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Max. total tool weight: 400 kg Feed Drives Drive type: Three-phase synchronous motors Linear measuring system X/Y/Z: direct, absolute X1 and X2 axes Rapid traverse: 120 m/min Max. acceleration: 10 m/s² Kv-factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Y axis Rapid traverse: 120 m/min Max. acceleration: 11 m/s² Kv-factor: 6 Peak force: 20,000 N Continuous force: 10,000 N Positioning accuracy: Tp = 0.008 mm Z1 and Z2 axes Rapid traverse: 120 m/min Max. acceleration: 20 m/s² Kv-factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle configuration: Horizontal, twin spindles side by side Spindle diameter: 40 mm Tool interface: HSK-A63 Cooling: Liquid-cooled motor spindles Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 to 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 800 mm Travel distances: - X axis: 800 mm - Y axis: 900 mm (optional 1,200 mm) - Z axis: 650 mm Difference coupled Z axes: < 1.0 mm Difference coupled X axes: < 1.0 mm Workpiece clamping / Table system Double swivel carrier (Q axis) with two directly driven NC rotary tables (A/U axes) Swivel time 0–180°: 5.0 s Max. asymmetric load: 1,600 Nm Cedpfjxt D D Rsx Admjaa Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 800 kg Peak torque: 1,900 Nm Rated torque: 1,300 Nm Max. table speed: 40 rpm Tool change times: Chip-to-chip at n < 10,000 rpm: > 3.0 s Chip-to-chip at n < 17,500 rpm: > 3.15 s Note System is supplied without product-specific tools, clamping devices, or robot grippers.

Sąlyga: labai geros būklės (naudotas), Here we offer you an ABB industrial robot. Specification: IRB 140 M2000 TPU 2 Panel Weight: 98 kg Maximum reach: 810 mm Payload: 6 kg Type: IRB 140 M2000 Cedsdyh Hljpfx Admeaa Scope of delivery: Robot, control unit, cables (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 2 000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2,000 kg Handheld remote control with digital display Dual foot pedal control Cjdpfx Adoncfvhsmoaa Height approx. min. 800 mm tilted to center, max. height 1,400 mm Min. height horizontal: 1,000 mm Faceplate diameter: 1,200 mm Minimum tilt angle: 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Sąlyga: labai geros būklės (naudotas), Mitsubishi Industrial 6-Axis Articulated Arm Robot We are offering a Mitsubishi Industrial 6-Axis Articulated Arm Robot. Mitsubishi Industrial 6-Axis Articulated Arm Robot 6-Axis Articulated Arm Robot RV-3SB Max. load capacity: 3.5 kg Weight: 38 kg Robot Controller: CR2B-574-S312 Teach pendant: R46TB with color/touch display Model: Mitsubishi Melfa RV-3SB Condition: used Cajdpfx Adji El Acsmsa Scope of delivery: (See picture) (Subject to technical changes and errors in data and specifications!) For any further questions, we are happy to assist you by phone.

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 5 000 kg, Complete set including manual and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range: 0.01 to approx. 0.9 rpm Codol Dq U Uepfx Admeaa CE certified

Sąlyga: labai geros būklės (naudotas), Denso Industrial Robot with Denso Controller We offer here a Denso industrial robot complete with Denso controller. Industries and Applications The VS-068 series provides high speed and performance in a compact, slim housing. In addition, numerous options are available that enable operation in a wide range of environments. Thanks to its high-speed performance, accuracy, and the wide selection of options available, the VS-068 can be deployed in almost any sector, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tools, medical devices and pharmaceuticals, plastics, and metal industries. The robot model is suitable for assembly, inspection, alignment, material handling, tending, packaging, palletizing, and custom applications. Codek E Ez Tjpfx Admjaa Denso 6-Axis Robot VS-068 with Denso Robot Controller 410200-2611 The compact model delivers exceptional performance and speed. Robot Model: VS068A4-AV6-C3N-ANNDN-NNNN Arm Reach: 710 mm Payload: 7.0 kg Cycle time: 0.31 sec Repeatability: ±0.02 mm Weight: 49 kg Year of manufacture: 2016 Type: Denso 6-axis robot VS-068 / Controller 410200-2611 Condition: used Included in delivery: (See photo) (Specifications are subject to change and errors excepted!) Should you have any further questions, we are happy to assist by phone.

Sąlyga: naujas, Gamybos metai: 2025, 3 ašių suvirinimo sukamasis stalas Protec KT 10 000 HV su aukščio reguliavimu Pilnas komplektas su rankiniu ir dvigubu kojiniu nuotolinio valdymo pultu Skaitmeninis greičio indikatorius Hidraulinis aukščio reguliavimas Pakreipimo kampas 0–130° Matmenys: aukštis pakreiptas min.: 1050 mm aukštis pakreiptas maks.: 2200 mm aukštis horizontalioje padėtyje min.: 1360 mm Tvirtinimo plokštės skersmuo: 2000 mm Ilgis: 3250 mm, plotis: 1700 mm Caodpfx Ajmk T Rbedmsa Greitis nuo 0,05 iki apie 0,6 aps./min.

Sąlyga: labai geros būklės (naudotas), Denso Type: Denso 6-Axis Robot VS-087 / Controller 410200-2611 A VS087-AV6-C3N features a cleanroom class 3 protection rating specification. Denso industrial robot with Denso controller. Industries and Applications The VS-087 series offers high speed and high performance in a compact, streamlined housing. In addition, various options are available to enable operation in a wide range of environments. Thanks to its high-speed performance, accuracy, and the variety of available options, the VS-087 can be used in nearly all sectors, including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tools, medical devices and pharmaceutical, plastics, and metal industries. This robot model is suitable for assembly, inspection, alignment, material handling, tending, packaging, palletizing, and custom applications. Denso 6-Axis Robot VS-087 with Denso Robot Controller 410200-2611 This compact model stands out for its outstanding performance and speed. Robot model: VS-087A4-AV6-C3N-ANNDN-NNNN Cajdpfx Adekx Hu Ajmsa Arm reach: 905 mm Payload: 7.0 kg Cycle time: 0.34 sec Repeatability: ±0.03 mm Weight: 51 kg Year of manufacture: 2016 Condition: used Scope of delivery: (See photo) (Subject to changes and errors in technical specifications and details!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Mitsubishi industrial 6-axis articulated arm robot. Mitsubishi Industrial 6-Axis Articulated Arm Robot 6-Axis Articulated Arm Robot RV-3SDB-S15 The articulated arm robot RV-3SDB The RV-3SB robot is specifically designed for handling payloads up to 3.5 kg. The housing, in compliance with IP65 standard, ensures operation under extreme conditions. Key features: • Adjustable axis compliance for workpiece tolerance compensation • Conveyor tracking • Sensorless collision detection • Sealed construction • Adaptive speed optimization Cedped H E H Uofx Admsaa Feature/Function Degrees of Freedom (number of axes): 6 Design: Standard (oil mist) Mounting: Floor, wall, or ceiling mounting possible (wall mounting with restriction on J1 axis) Construction: Vertical articulated arm Drive system: AC servo (all axes with brakes) Position detection: absolute encoder Movement range (degrees): Base (J1): 340 (−170 to +170) Shoulder (J2): 225 (−90 to +135) Elbow (J3): 191 (−20 to +171) Forearm rotation (J4): 320 (−160 to +160) Wrist pitch (J5): 240 (−120 to +120) Wrist rotation (J6): 720 (−360 to +360) Movement speed (degrees/s): Base (J1): 250 Shoulder (J2): 187 Elbow (J3): 250 Forearm rotation (J4): 412 Wrist pitch (J5): 412 Wrist rotation (J6): 660 Resultant maximum speed: 5500 mm/s Payload nominal: 3 kg, maximum: 3.5 kg Reach radius (to rotation center of J5 axis): 642 mm Weight: 37 kg Robot controller: CR1DA-721-S15 control unit (230V) Teach pendant: R46TB with color/touch display Technical data: Dimensions (W × H × D): 252 × 240 × 114 mm Weight: 1.25 kg Connection type: • Connection to robot controller with round plug; cable length: 7 m • Interfaces: RS422 • For connection to the robot controller Display/Monitor: • 6.5" touch-sensitive TFT monitor with backlighting and 640 × 480 pixel resolution; touchscreen can be operated with fingers or stylus. Type: Mitsubishi Melfa RV-3SDB-S15 Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and specifications excepted!) If you have any further questions, feel free to contact us by telephone.

Sąlyga: labai geros būklės (naudotas), Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for a wide range of applications due to their compact and slim design. Thanks to three installation options—floor, wall, and ceiling—these six-axis models are easy to integrate. The fully enclosed design (IP 65) enables use in cleanrooms or under harsh environmental conditions. Features - Completely enclosed structure with internally routed supply lines - Rigid structure - Multiple installation options - Patented Stäubli JCM gear modules Caodpfowbqwcjx Admoa - Large working envelope Advantages - Perfect protection of components - Standard version complies with Cleanroom Class ISO 5 - Easy to clean - Excellent dynamic path performance - High flexibility - Precision, dynamic performance, and speed with reduced maintenance requirements - Optimal utilization of the workspace Technical Data TYPE TX90L Degrees of freedom: 6 Rated payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist): IP65 (IP67) Mounting options: floor / wall / ceiling Controller: Stäubli CS8 / CS8C Features - Ethernet, fieldbus, digital inputs and outputs, serial interfaces - Easy integration, 19-inch rack-mount version, protection class IP20 - All connections on the front - Proven digital technology Advantages - Open architecture - Compact - Good accessibility - Reliable Technical Data: Type CS8C Dimensions (H x W x D): - 331 x 445 x 455 mm - 481 x 445 x 455 mm Protection class: IP20 (IP54 optional) Working memory: 64 MB RAM (min.) Storage capacity: 128 MB (min.) flash disk and USB port System/programming language: VAL 3 (multitasking interpreter language), IEC 61131-3 PLC language Communication: Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of delivery: (see image) (Changes and errors in the technical data are reserved; all information is subject to change!) If you have further questions, we would be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Mitsubishi Industrial 6-Axis Articulated Arm Robot We are offering a Mitsubishi industrial 6-axis articulated arm robot. RV Series Industrial Robot Compact and powerful, offering flexible automation and high reliability. The RV series provides a highly dynamic 6-axis articulated robot for maximum quality. Model: RV-3SDB-S15 Number of axes: 6 Maximum payload: 3.5 kg Reach radius: 642 mm Weight: 38 kg Condition: used Casdpfogkg Dlex Admsa Scope of delivery: (see picture) (Subject to changes and errors in technical specifications. Details are provided without obligation!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Techman Model: Techman Robot TM5-900 The TM5-900 features an integrated image processing system, giving it the ability to “see” and enabling it to handle assembly automation and inspection tasks with maximum flexibility. It collaborates with human operators, sharing tasks without compromising productivity or safety. The robot delivers the highest levels of precision and efficiency while operating within the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 applications Maximum flexibility and adaptability Extremely low automation and maintenance costs The TM5-900 is a true plug & play solution Monitor, mouse, and keyboard can be connected directly to the controller The TM5-900 is ready to operate in just a few steps. Scope of delivery: – Techman Robot TM5-900 – Controller, connection cables – Operator device – 2 calibration plates for the camera system – 1 landmark Condition: used Scope of delivery: (see picture) (Technical data, subject to change and errors!) Codpfotym Rzjx Admsaa For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Denso Industrial Robot with Denso Controller We are offering a Denso industrial robot with Denso controller. Industries and Applications The VS-068 series delivers high speed and superior performance in a compact, slim housing. In addition, numerous options are available, allowing operation in a wide variety of environments. Thanks to its high-speed performance, precision, and multiple available options, the VS-068 can be used in nearly every sector, including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tool, medical device and pharmaceutical, plastics, and metal industries. This robot model can be used for assembly, inspection, alignment, material handling, machine tending, packaging, palletizing, and custom applications. Denso 6-Axis Robot VS-068 with Denso Robot Controller 410200-2611 This compact model stands out with exceptional performance and speed. Robot model: VS068A4-AV6-C3N-ANNDN-NNNN Arm reach: 710 mm Payload: 7.0 kg Cycle time: 0.31 sec Caedpfx Ajkz Uy Rodmea Repeatability: ±0.02 mm Weight: 49kg Year of manufacture: 2016 Type: Denso 6-axis Robot VS-068 / Controller 410200-2611 Condition: used Scope of delivery: (See image) (Specifications subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for a wide range of applications due to their compact and slim design. Thanks to the three possible mounting positions—floor, wall, and ceiling—the six-axis robots are easy to integrate. The fully enclosed design (IP 65) allows operation in cleanrooms or under aggressive environmental conditions. Features Fully enclosed structure with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gear modules Large reach Advantages Optimum protection of components. Standard version complies with cleanroom class ISO 5. Casdpfjvx Tbtex Admsa Easy to clean. Excellent dynamic path behaviour High flexibility Precision, dynamics and speed with reduced maintenance effort Optimal use of workspace Technical Data TYPE TX90L Number of axes: 6 Nominal payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist): IP65 (IP67) Mounting options: Floor / Wall / Ceiling Controller: Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easily integrable, 19-inch rack version, protection class IP20 All connections on the front panel Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical data: Type: CS8C Dimensions (H x W x D): 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory: 64 MB RAM (min.) Storage capacity: 128 MB (min.) flash disk and USB port System/programming language: VAL 3 (multi-tasking interpreter language), PLC IEC 61131-3 Communication: Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of delivery: (See picture) (Specifications are subject to change and errors may occur!) If you have further questions, we will be happy to answer them by phone.