Deckel Maho Dmu 50 M pirkti naudotą (344)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, veikimo valandos: 32 498 h, X ašies eiga: 500 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 400 mm, nominali (akivaizdi) galia: 35 kVA, valdiklių gamintojas: Heidenhain iTNC 530, ruošinio plotis (maks.): 500 mm, ruošinio skersmuo (maks.): 630 mm, ruošinio svoris (maks.): 200 kg, bendras aukštis: 2 590 mm, bendras ilgis: 4 780 mm, bendras plotis: 4 410 mm, bendras svoris: 5 900 kg, veleno greitis (min.): 18 000 aps./min, ašies variklio galia: 35 000 W, Year of manufacture: 2010 CNC Control: Heidenhain iTNC 530 Axes Travel X-axis mm: 500 Travel Y-axis mm: 450 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.001) B-axis indexing degrees: 0º/108º (0.001) Rapid traverse m/min: 80/50/50 NC Milling/Rotary Table: Pallet dimensions mm: Ø390 Max. workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Max. spindle speed rpm: 18,000 Spindle drive power kW: 35/25 (40% DC/cont) Spindle torque Nm: 130/87 Cooling Coolant supply through spindle bar: 40 Tool System Tool holder: HSK-A 63 Number of tools in magazine: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. tool length mm: 300 Chip-to-chip time sec.: 5 Equipment Chip conveyor Infrared probe Rinsing gun Blow air through spindle center selectable via M-function Signal light Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat exchanger Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Prepared for internal cooling (40/80 bar) RENISHAW probe Automatic door Machine operating hours: Ijdpfx Aaeyi Dnisuear Power-on hours: 54,257 Spindle running hours: 32,498 Total power requirement kVA: 48 Base machine: Dimensions / Weight Length mm: 4,780 Width mm: 4,410 Height mm: 2,590 Weight kg: 5,900

Būklė: geras (naudotas), Gamybos metai: 1996, mašinos/transporto priemonės numeris: 54634, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 51 997 h, galia: 10 kW (13,60 AG), įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, ruošinio svoris (maks.): 500 kg, bendras aukštis: 2 400 mm, bendras ilgis: 2 600 mm, bendras plotis: 1 800 mm, bendras svoris: 3 500 kg, X ašies padavimo greitis: 6 m/min, Y ašies padavimo greitis: 6 m/min, padavimo greitis Z ašis: 6 m/min, tvirtinimo skersmuo: 40 mm, greitasis eiga Z ašyje: 60 m/min, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, veleno greitis (maks.): 15 000 aps./min, veleno greitis (min.): 10 aps./min, Įranga: dokumentacija / vadovas,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Valdymo blokas Gamintojas: HEIDENHAIN Modelis: nenurodytas Judesiai X ašies eiga: 500 mm Y ašies eiga: 400 mm Z ašies eiga: 400 mm Šis DECKEL MAHO DMU 50 T pagamintas 2002 metais. Įrengtas SK40 DIN69871 spindelio tvirtinimu, stalo dydžiu 700x500 mm ir didžiausiu 9000 aps./min. Puikiai tinka įvairiapusiškam apdirbimui. Dėl daugiau informacijos susisiekite su mumis. Pritaikymo sritys Iaodpfex D Dukox Aaujr Frezavimas

Būklė: geras (naudotas), Gamybos metai: 2000, Hello, I am offering for sale a 5-axis CNC Machining Center DECKEL MAHO DMU 50 V evolution. The machine is connected and in operation. _ Type: 5-axis Machining Center Manufacturer: DMG DECKEL MAHO Model: DMU 50 V evolution Control: HEIDENHAIN TNC430 Country of manufacture: Germany Year of manufacture: 2000 _ Machine specifications: – Number of axes: 5 – Table size (length x width): 500 x 380 mm – Maximum spindle speed: 18,000 rpm – Spindle power: 15 kW – X/Y/Z axis travel: 500/420/380 mm – C/B axis travel: 180/360 degrees – Maximum feed rate: 20 m/min – Total power requirement: 40 kVa Isdpfx Astt Ntfeausar – Machine dimensions (L x W x H): 2,800 x 2,300 x 2,600 mm – Total weight: 6,000 kg

Būklė: naudotas, Gamybos metai: 2007, veikimo valandos: 73 090 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 350 mm, greitas poslinkis X ašimi: 80 m/min, greitas poslinkis Y ašis: 50 m/min, greitasis eiga Z ašyje: 50 m/min, X ašies padavimo greitis: 20 m/min, Y ašies padavimo greitis: 20 m/min, padavimo greitis Z ašis: 20 m/min, nominali (akivaizdi) galia: 21 kVA, valdiklių gamintojas: Siemens, valdiklio modelis: 840D powerline, stalo plotis: 380 mm, stalo ilgis: 500 mm, bendras svoris: 6 500 kg, veleno greitis (maks.): 18 000 aps./min, veleno veikimo valandos: 24 649 h, įrankių magazino lizdų skaičius: 30, įėjimo įtampa: 400 V, ašių skaičius: 5, Įranga: drožlių transporteris, For sale is a machining center from the manufacturer Deckel Maho DMU 50, maintained in excellent technical and visual condition. The machine has been regularly serviced and is both visually and technically in very good condition. It is fully functional, inspected, and ready for immediate operation. Additional equipment: - Paper band filter - Coolant system (KSS system) With our all-round service package, we personally take care of the entire process for you on request—from delivery to commissioning of your new machine. This includes unloading, installation, and alignment of the machining center. Afterwards, our experienced service technicians perform professional commissioning, carry out all necessary functional checks, and ensure that your machine runs reliably and precisely. Furthermore, we offer customized training for your staff so you can make optimal use of the machine from day one. We also continue to support you after installation—be it for maintenance, technical inquiries, or future upgrades. With our all-round service package, you don’t have to worry about anything—we make sure everything runs smoothly so you can focus entirely on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction systems to make your production even more efficient and cleaner. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specializing in Mazak machines and other brands. We place great value on personal support and are happy to assist you even after your purchase. You are also welcome to view and test the machine under power in our workshop at any time. We invite you to inspect the condition and functionality for yourself on site. Iodpfxjxwtp Ro Aausar With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information provided without guarantee.

Būklė: naudotas, Gamybos metai: 1998, x eiga 500 mm y eiga 400 mm z eiga 400 mm Valdymas: TNC 426M Heidenhain Pagrindinio veleno apsukų diapazonas: 20–9 000 min⁻¹ Pagrindinio veleno pavara: 9 / 13 kW Didžiausias sukimo momentas: 57 / 82 Nm Įrankio tvirtinimas: ISO 40 DIN 69871 Stalo matmenys: 700 x 500 mm Pasukamas B: 105° (-10°/+95°) rankiniu būdu Sukiojamas 360° rankiniu būdu Maks. stalo apkrova: 200 kg T griovelių skaičius: 7 Atstumas tarp T griovelių: 63 mm T griovelių plotis: 14H7 mm Centravimo skylė: 30H7 mm Įrankių vietų skaičius: 16 Įrankio tvirtinimas: ISO 40 DIN 69871 Maks. įrankio ilgis: 290 mm Maks. įrankio svoris: 6,0 kg Maks. bendras svoris: 50 kg Didžiausias padavimo greitis: 10 000 mm/min Greitėjimo eiga: 12 m/min Padalos vienetas: 0,01 mm Bendras energijos poreikis: 17 kW Staklių svoris apytiksliai: 3,2 t Iasdpfx Aoxmag Usausr Užimamas plotas apytiksliai: 4,0 x 4,0 x 2,5 m CNC universalus apdirbimo centras DECKEL MAHO - DMU 50 T - 5 ašys (3 + 2) - Sūkurinis/pasukamas stalas su kampine indikacija (B+C ašys valdomos rankiniu ratuku)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, CNC frezavimo staklė Deckel Maho DMU 50 T valdymas Heidenhain TNC426 apsukų dažnis: 20-9000 aps./min. padavimo greitis X, Y, Z: 20-10000 mm/min sparčios eigos X, Y, Z: 12000 mm/min darbo zona X 500 mm, Y 400 mm, Z 400 mm Iasdpfxox Taq Nj Aausr įrankio laikiklis: SK40 DIN 69871 tvirtinimo varžtas DIN 69872 įrankių keitiklis: 16 pozicijų maks. išsikišimo ilgis nuo veleno galo 290 mm darbo stalas: rankiniu būdu pasukama ir pakreipiama pasukama plokštė matmenys 700 x 500 mm T-pjūviai M14 centravimo skylė 30 mm transportavimo duomenys: svoris 3200 kg matmenys (ilgis x plotis x aukštis) 2,10 x 2,30 x 2,30 m

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 11035509414, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, valdiklio modelis: Heidenhain TNC 426, veleno greitis (maks.): 9 000 aps./min, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid constitutes a binding obligation to collect the machine within the specified period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Travel distances X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Rapid traverses & feed rates Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Spindle speed (max.): 9,000 rpm Worktable (rotary table with swiveling axis) Table width: 500 mm Table length: 700 mm Table load capacity: 200 kg Tool holder diameter: 40 mm Tool length: 290 mm Tool weight: 6,000 g Number of tool magazine stations: 16 MACHINE DETAILS Iedexp Nnmjpfx Aauoar Control: Heidenhain TNC 426 Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,400 mm Electrical Data Total weight: 3,000 kg Input voltage: 400 V Type of current: Three-phase EQUIPMENT Documentation/manual WNT machine vice (jaw width: 125 mm) Lot of SK 40 holders Cutting tools Workshop cabinet with accessories

Būklė: naudotas, Gamybos metai: 2008, x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN Control: MillPlus iT Table clamping surface: Ø 500 x 380 mm B-axis: 0 - 161.955° C-axis: 360° Spindle taper: SK 40 Spindle speeds: 20 - 18,000 rpm Max. spindle power: 35 kW Max. spindle torque: 130 Nm Ijdewlvi Espfx Aauear Infinitely variable feeds up to 20,000 mm/min Rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min Rapid traverse B-axis: 40 rpm Rapid traverse C-axis: 50 rpm Number of tool magazine stations: 30 Tool diameter with 2 free positions: 130 mm Tool diameter with full tooling: 80 mm Max. tool length: 300 mm Max. tool weight: 6 kg Internal coolant supply: 40 bar Total power demand: 52 kVA Machine weight: approx. 6 t = 5-axis machining center with 2-axis NC rotary swivel table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11035534144, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, greitas poslinkis X ašimi: 12 m/min, veleno greitis (maks.): 9 000 aps./min, No reserve price – guaranteed sale to the highest bidder! The payment deadline is one week after the purchase of the machine! By placing a bid, you commit to collecting the machine on time between 17.11.2025 and 21.11.2025! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate for X, Y, and Z axis: 10,000 mm/min Spindle speed (max.): 9,000 rpm Iajdpfx Aexm T I Eeauor Tool holder: SK 40 Max. tool length from spindle nose: 290 mm Max. tool weight for automatic tool change: 6 kg Max. total tool weight in magazine: 50 kg Clamping surface: 700 x 500 mm Rotational range: 360° Swivel range: +95° / -10° Permissible table load: 200 kg MACHINE DETAILS Control system: SIEMENS SINUMERIK 810 D Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,300 mm Total weight: 5,000 kg FEATURES 16-position automatic tool changer Rotary table with swivel axis Mechanical table clamping system Note: Machine vices shown on the table are not included in the scope of delivery.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 1 380 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 350 mm, veleno greitis (maks.): 18 000 aps./min, įrankių magazino lizdų skaičius: 30, B ašies pasukimo kampas (maks.): 108 °, C ašies pasukimo kampas (maks.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Spindle speed range: 18,000 rpm Tool holder: HSK-63-A Tool magazine capacity: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min MACHINE DETAILS Control unit: Heidenhain iTNC 530 Machine weight: 6,500 kg Operating hours: 1,380 h Power-on time: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Tool changer - NC rotary swivel table - Through-spindle coolant (prepared for 40 bar) - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement Iasdpfxjwu Evto Aaujr

Būklė: geras (naudotas), Gamybos metai: 2006, TECHNICAL DATA Main Drive Spindle Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Working Spindle: Taper: HSK-A63 Tool clamping: Hydraulic Feed Drive Linear motor: X-axis AC servo motors: C, B, Y, Z Feed rate X, Y, Z: Up to 20,000 mm/min Rapid Traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Measuring System Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working Area X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955° C-axis: n x 360° Tool Changer with Double Gripper Magazine capacity: 120 Max. tool diameter with all places filled: 80 mm Max. tool diameter with free adjacent spaces: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm T-slot spacing / size: 63 / 14 H7 Locating bore: 30 H6 Max. torque: 1491 Nm Max. table rotation: 50 rpm B-axis: Max. swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° – 161.955° Isdou Hkb Rspfx Aauear Input/display increment: 0.001° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6,800 kg Installation weight: Approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF DELIVERY Including (not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage monitoring Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery according to photo documentation We do not guarantee the correctness, completeness, or currentness of the information provided.

Būklė: geras (naudotas), Gamybos metai: 2001, MACHINE SPECIFICATIONS Control system: HEIDENHAIN Machining area: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm Main drive: Spindle speed range: 20 – 18,000 rpm Power (40/100% duty cycle): 35/25 kW Torque (40/100% duty cycle): 130/87 Nm Feed rates: Working feed rates (X/Y/Z): 20-20,000 mm/min Rapid traverse (X/Y/Z): 50 m/min Work table (B+C axes): Table dimensions: Ø 500 x 380 mm Maximum table load: 200 kg T-slots (Number / Size / Tolerance): 7 / 14 mm / H7 C-axis travel: 360º (res. 0.001º) B-axis travel: 180º (res. 0.001º) Machine: Machine dimensions (LxWxH): 2,683 x 5,353 x 2,470 mm Machine weight: 5,020 kg Spindle taper: Taper type: SK 40 (DIN 69871 A) Electrical connection: Phases | Frequency | Voltage | Power: 3N | PE~50-60Hz | 400/230V | 40 kW Accessories: Coolant through spindle Iaedpfxjxq Hb Te Aauor Automatic tool changer: ATC-32 - Max tool weight / Max tool diameter: 6 kg / 200 mm Chip conveyor Electronic handwheel: HR-410 High-capacity coolant system: Interlit SUK-200-900 Equipped with interface for Renishaw probe: probe included

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, greitas poslinkis X ašimi: 12 m/min, greitas poslinkis Y ašis: 12 m/min, greitasis eiga Z ašyje: 12 m/min, valdiklių gamintojas: Heidenhain, bendras aukštis: 2 500 mm, bendras ilgis: 4 000 mm, bendras plotis: 2 200 mm, stalo apkrova: 200 kg, bendras svoris: 3 500 kg, Marke: Deckel Maho Modell: DMU 50T Seriennummer: 500051 Steuerung: Heidenhain Tischmaße: 500 x 700 mm Maximale Tischbelastung: 200 kg Verfahrwege: X-Achse: 500 mm Y-Achse: 400 mm Z-Achse: 400 mm Spindel: Drehzahl: 9.000 U/min Werkzeugaufnahme: SK 40 Werkzeugmagazin: 16 Plätze Eilganggeschwindigkeit: X, Y, Z: 12 m/min Iedpfx Asw D Hafeauoar Maschinenabmessungen: 4.000 x 2.200 x 2.500 mm Maschinengewicht: 3.500 kg

Būklė: naudotas, Gamybos metai: 2004, Apvalus stalas iš DMU 50eV / 1104 serijos... įskaitant C/B variklius ir Heidenhain matavimo prietaisus. Apvalus stalas 2023 m. buvo kapitališkai suremontuotas: visi guoliai ir sandarikliai nauji, žarnos ir kt. taip pat nauji. Ijdpsy Amkzjfx Aauear

Būklė: naudotas, Gamybos metai: 1999, X eiga: 500 mm Iajdpfxsy Aa Nkj Aaujr Y eiga: 400 mm Z eiga: 400 mm Heidenhain valdymas Staklių svoris apie 3200 kg ISO40

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, sukimosi greitis (maks.): 4 500 aps./min, valdiklio modelis: Heidenhain TNC 310, TECHNINĖS DETALĖS Judėjimo eiga X ašyje: 500 mm Judėjimo eiga Y ašyje: 400 mm Judėjimo eiga Z ašyje: 400 mm Įrankio tvirtinimas: SK 40 Sukimosi greitis: 20–4500 aps./min STAKLIŲ DETALĖS Valdymas: Heidenhain TNC 310 Matmenys ir svoris Užimama erdvė: apytiksl. 2,15 x 2,00 x 2,50 m Staklių svoris: apytiksl. 3 t ĮRANGA Pasukamas apvalus stalas Iodsywgtxopfx Aauoar Dokumentacija

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, veikimo valandos: 12 800 h, ašių skaičius: 5, Šis 5 ašių DECKEL MAHO DMU 50V buvo pagamintas 1996 m. Jame įdiegta "Millplus" valdymo sistema su programinės įrangos versija DV400, išorinis hidraulinis įtaisas prispaudimo įtaisams ir "Hainbuch" hidraulinis spaustuvas BZI32 apkabai. Jei norite įsigyti aukštos kokybės frezavimo galimybių, apsvarstykite mūsų parduodamas DECKEL MAHO DMU 50V stakles. Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. Papildoma įranga • Hainbuch hidrauliniai spaustuvai BZI32 įvorėms Mašinos privalumai Isdex U Tinopfx Aauoar Techninės mašinos privalumai • Mašina valdoma su variklio kodavimo įrenginiu, nes šiuo metu c ašies kodavimo įrenginys yra sugedęs. • Vidinis aušinimas: 40 barų • Išorinis hidraulinis blokas prispaudimo įtaisams • Atsarginis laikiklis ant sukamojo stalo • Rotacinė jungtis ant stalo • Įrankių pozicijos: 24 įrankių pozicijos – 2 iš dalies laisvos (vietos nėra) • Matavimo zondas: „renishaw“ – paruoštas Papildoma informacija Mašina vis dar įjungta

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Ašys: 5, eiga X/Y/Z: 500mm/400mm/400mm, apsisukimų skaičius: 9000 aps./min, veleno galia: 9kW/13kW, įrankių vietos: 16, maks. įrankio ilgis: 290mm, maks. įrankio svoris: 6kg, maks. stalo apkrova: 200kg, pastūma: 10m/min, greitoji eiga: 12m/min. Staklių matmenys X/Y/Z: apie 4500mm/4000mm/2500mm, svoris: apie 3400kg, valdymas: Heidenhain MillPlus, darbo valandos: 34724h, veleno valandos: 6490h. Vienas valdymo mygtukas yra sugedęs, be to, kartais įrankis neišmetamas. Yra dokumentacija. Galima apžiūra vietoje. Šios staklės buvo naudojamos mokymo tikslais. Iasdpfox Aupiex Aauor

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, Veleno apsukų diapazonas: 9000 aps./min, eiga X/Y/Z: 500 mm / 400 mm / 400 mm, padavimo greitis: 10000 mm/min, greitas poslinkis: 12 m/min. Stalo matmenys X/Y: 700 mm / 500 mm, didžiausia stalo apkrova: 200 kg, T-formos griovelių skaičius: 7, atstumas tarp griovelių: 63 mm. Valdymo sistema: Heidenhain, įrankių keitiklis: 16 pozicijų, matmenys X/Y/Z: 4000 mm / 2200 mm / 2450 mm, svoris: apie 3500 kg. Iasdsw Tc Nyepfx Aausr

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, veikimo valandos: 37 300 h, Funkcionalumas: visiškai funkcionalus, x-travel: 500 mm Iaedpfswm Nqrex Aausr y-travel: 400 mm z-travel: 400 mm Control: TNC Heidenhain Spindle speed range – main spindle: 20 – 9,000 rpm Drive power – main spindle: 9 / 13 kW Table size: 700 x 500 mm tiltable B: 105° (-10°/+95°) manual rotatable: 360° manual Max. table load: 200 kg Number of T-slots: 7 Centering bore: 30H7 mm Number of tool stations: 16 positions Tool holder: ISO 40 DIN 69871 Max. tool length: 290 mm Max. tool weight: 6.0 kg Max. total tool weight: 50 kg Max. feed rate: 10,000 mm/min Total power requirement: 17 kW Machine weight approx. 3.2 t Space requirement approx. 4.0 x 4.0 x 2.5 m

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel Maho DMU 50M with Heidenhain TNC 124 Path Control - Excellent Condition! Technical Data: >> Year of manufacture: 1998 >> Heidenhain Control TNC 124 >> Travel paths X500/Y400/Z400 >> C and B axes manually adjustable with digital display >> Spindle speed: 20–4500 rpm Iedjr Hbf Topfx Aauoar >> Feed rate: 5000 mm/min >> Rapid traverse: 5 m/min >> Tool holder: SK 40 >> Table Ø700x500 mm >> Swivel range: +95° / -10° >> Electronic handwheel >> Weight: 2800 kg >> Machine footprint approx. 4.0 m x 2.5 m, height 2.6 m >> Coolant system >> Power supply: 400V 32A About the Machine: For sale is a universal milling machine Deckel Maho DMU 50M with a Heidenhain TNC 124 path control, in very good condition. The table can be positioned manually (digitally) via two additional axes (B and C). The control unit is very user-friendly: it allows entering and moving to positions, deep and thread drilling, drilling patterns, hole circles, row drilling, and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain path control system makes working easier and even more precise. The milling machine was used for training in a large company. Take advantage of the opportunity to view and test the machine under power on site.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel Maho DMU 50M with Heidenhain TNC 124 Contour Control – Excellent Condition! Technical Data: - Year of manufacture: 1998 - Heidenhain TNC 124 control - Travel X500/Y400/Z400 mm - C and B axes – manual adjustment with digital readout - Spindle speed: 20–4500 rpm - Feed rate: 5000 mm/min - Rapid traverse: 5 m/min - Tool holder: SK 40 - Table size: Ø700 x 500 mm - Swivel range: +95°/-10° - Electronic handwheel - Weight: 2800 kg - Machine dimensions approx. 4.0 m x 2.5 m, height 2.6 m - Coolant system - Electrical connection: 400 V, 32 A Iodpfor Hbf Eox Aauear About the machine: For sale is a Deckel Maho DMU 50M universal milling machine equipped with a Heidenhain TNC 124 contouring control system, in excellent condition. The table is manually adjustable (digitally indicated) via two additional axes, B and C. The control is user-friendly, allowing input and approach of positions, deep and thread drilling, drilling patterns, hole circles, row drilling, and rectangular pocket milling. Via an interface, programs can be entered and read out. The Heidenhain contouring control enables easier and more precise operation. The milling machine was used in a large corporation’s training center. You are welcome to inspect and test the machine under power on site.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Iš karto laisva iš Šveicarijos įrankių gamybos: 5 ašių frezavimo staklės Deckel Maho Tipas: DMU 35 M Metai: 2000 CNC valdymas: Heidenhain TNC 310 M Elektroninis rankinis ratas Stalas: 400 x 280 mm Isdpey Almnofx Aauear Stalo apkrova iki 100 kg Eigos X/Y/Z: 350/240/340 mm Veleno apsukos be pakopų: 0–5000 aps./min Tvirtinimas: SK 40 Greitas žingsnis: 5 m/min Servo varikliai X/Y/Z ašims Sukimosi diapazonas: 360 laipsnių Stalo fiksacija: +105/–150 laipsnių Svoris: 2 t Įrankių laikikliai, hidraulinis spaustuvas Kaina: 5 000 Eur + PVM vietoje

Būklė: geras (naudotas), Please read the technical specifications thoroughly. If the machine is of interest to you as an investment, we kindly ask you to provide your complete credentials including a valid telephone number and email address when requesting an official offer. DECKEL Milling Machine, Tool Milling Machine DMU 35 M 3 x 2 Axis CNC Milling Machine Equipped with SIEMENS 810 D – ShopMill software Iaodpfoxz Rdasx Aaujr Year of manufacture: 2001 and 2003 (2 units available) Travel ranges (X/Y/Z): 350 x 240 x 340 mm Spindle speed, infinitely variable: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: Max. 55/80 Nm Universal tilt/rotary table: 400 x 290 mm Table load capacity: 100 kg Distance spindle nose/table (min./max.): 145 / 485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotation range: 360 degrees Swivel range: degrees total power requirement: kVA Weight: approx. 1750 kg Technical data non-binding! Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servo motor with toothed belt - 2 gear stages - Full enclosure with sliding door - Swivelling control panel - Coolant nozzles at vertical head - Coolant unit - Chip tray with coolant tank - Electronic handwheel - Machine mounts - Machine lamp - Serial RS232C interface, LAN (RJ45) The machine is perfectly suited for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. It stands out due to its versatility, with the additional manually operated rotary/swivel table allowing five-sided machining. Condition: Good to very good. Comes from a vocational training center, see pictures. Can be tested under power.