Ddr Batterieladegeraet pirkti naudotą (59)

Sąlyga: naudotas, Technical details: Belt width: 80 mm Sheet thickness: 1.5 mm Number of rollers: 5 Total power requirement: 1.2 kW Approx. machine weight: 150 t Approx. required space (LxWxH): 1.1 x 0.7 x 1.4 m Kwedpfsu Ic E Rex Af Ist Straightening rollers: - 2 upper rollers, 3 lower rollers - Material feed via two pneumatically controlled rollers - Pneumatic connections not installed As is.

Gamybos metai: 1977, Sąlyga: geras (naudotas), 2 units DDR emergency power generators Engine manufacturer: VEB SKL Magdeburg DDR Type: 8NVD26 A2 Year of manufacture: 1977 Continuous output: 294 kW Maximum output: 323 kW Displacement: 52.96 liters Compression ratio: 14 Speed: 750 rpm Specific fuel consumption: 224 g/kWh Fuel consumption over 8 hours: 640 liters Boost pressure ratio: 1.38 Charge air temperature after turbocharger: 60°C Kjdpfxoigyt Ho Af Iewt Generator: Manufacturer: VEM Dessau Type: SSED 509-8a Voltage: 400 Volt Electric power: 330 kVA Power factor: 0.8 Dimensions: Length 4270 mm, Width 1516 mm, Height 2030 mm Total weight approx. 8500 kg per unit !! Further information exclusively by phone !!!

Sąlyga: labai geros būklės (naudotas), For sale: DDR motor pump. - 800 l/min - 28 HP - Very good condition. Kwodpfx Afsv Nrf Eo Ist

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 21 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: P147YH288, X ašies eiga: 700 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 330 mm, nominali (akivaizdi) galia: 11 kVA, bendras svoris: 2 200 kg, veleno greitis (min.): 24 000 aps./min, aušinimo skysčio tiekimas: 40 juosta, įrankių magazino lizdų skaičius: 21, Įranga: dokumentacija / vadovas, drožlių transporteris, Įranga: - FANUC DDR-T skaitmeninis 4-os daliklis su priešiniu atrama - aukšto slėgio aušinimas per špindelį 24 000 aps./min - 200L drožlių konteineris su aukšto slėgio siurbliu - automatizuotos šoninės durys robotizuotam užkrovimui - įrenginys su metine FANUC techninės priežiūros sutartimi - pasirenkamai už papildomą mokestį: Fanuc M20iA12L robotas jau integruotas į įrenginį Ksdpfx Aexnhvysf Iswt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 15 200 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: P172ZH357, X ašies eiga: 700 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 330 mm, nominali (akivaizdi) galia: 11 kVA, bendras svoris: 2 200 kg, veleno greitis (min.): 24 000 aps./min, aušinimo skysčio tiekimas: 40 juosta, įrankių magazino lizdų skaičius: 21, Įranga: dokumentacija / vadovas, drožlių transporteris, Įranga: - FANUC DDR-T skaitmeninis 4-os daliklis su priešiniu atrama - aukšto slėgio aušinimas per špindelį 24 000 aps./min - 200L drožlių konteineris su aukšto slėgio siurbliu - automatizuotos šoninės durys robotizuotam užkrovimui - įrenginys su metine FANUC techninės priežiūros sutartimi - pasirenkamai už papildomą mokestį: Fanuc M20iA12L robotas jau integruotas į įrenginį Ksdpfxexnhtlo Af Iewt

Sąlyga: geras (naudotas), Gamybos metai: 2020, Gearmotor - Nord Drivesystems - 0.75 kW - 4 rpm Kedpfx Afjv Uh S Ee Iswt - Type SK 9043.1VF-80LP/4 - Year 2020 - Weight: 160 kg - Price listed per unit.

Sąlyga: naudotas, • Good condition Kwedpfx Ajv Sar Eef Ijt • Printing area approx. 3000 x 1800 x 1100 mm

Sąlyga: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Naudotas Mark kompresorius su džiovintuvu. Naudotas, geros techninės būklės. Paruoštas atsiėmimui. Kjdpfx Aowprvisf Iswt

Sąlyga: labai geros būklės (naudotas), Type: AM250 / SMC Thermo Chiller HRS024-A-20-T Complete System for Metal 3D Printing / Additive Manufacturing Description For sale is a complete metal 3D printing system consisting of: - Renishaw AM250 Additive Manufacturing System - SMC Thermo Chiller HRS024-A-20-T (MS400) for precise temperature control The system comes from an industrial research environment and was used for additive manufacturing of metal components. The AM250 is renowned for its high process stability, repeat accuracy, and Renishaw’s proven powder bed technology. The integrated thermo chiller ensures stable operating temperatures and is specifically matched to the system. Technical Specifications – Renishaw AM250 Description / Value Machine number: 380T38 Control cabinet no.: AM250 Operating voltage: 230 V Phases: 1 PH + N + PE Control voltage: 24 V DC Heating capacity: 2 kW Current consumption: 16 A Operating temperature: 15 °C – 30 °C Overload protection: Circuit breaker Technical Specifications – SMC Thermo Chiller HRS024-A-20-T (MS400) Description / Value Model: HRS024-A-20-T (MS400) Cooling capacity: approx. 2.4 kW Kwedpfxexnzu As Af Ist Operating voltage: 230 V AC, 1 phase Temperature range: 5 °C – 35 °C Refrigerant: R407C Condition: used Scope of delivery - Renishaw AM250 main unit - SMC Thermo Chiller HRS024-A-20-T (MS400) - Control and connection cables - Operation module / Control cabinet (Technical data and details subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Gamybos metai: 2016, Sąlyga: beveik kaip naujas (parodų įrenginys), 1 unit heavy-duty gearbox Manufacturer: NORD DRIVESYSTEMS Type: SK9082.1/52 1 unit, left-hand design Shaft diameter: 110 mm, shaft length: 210 mm Torque M/2: 12,000 Nm Kodpfx Ash Igwhof Iowt i = 123.13 Dimensions (horizontal installation): Length: 1200 mm Width (including shaft 210 mm): 600 mm Height: 600 mm Weight per unit: 620 kg Condition: As new, only tested during trial run. Can be installed in either horizontal or vertical position.

Sąlyga: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 945,4 kW (1 285,38 AG), aušinimo tipas: oras, bendras svoris: 2 600 kg, bendras plotis: 2 230 mm, bendras ilgis: 8 190 mm, bendras aukštis: 2 500 mm, garantijos trukmė: 6 mėnesiai, Sausasis šaldytuvas ALFA LAVAL S.p.a. VDDS906CD196 945,4/779,4 kW Aušinimo galia: 945,4 / 779,4 kW / 268,8/221,6 tonos (40/35 — +25°C) Pagaminimo metai: 2006 Skystis: glikolis + vanduo Skysčio srautas: 164,4 / 135,5 m³/h Oro srautas: 251 913 / 195 147 m³/h Ventiliatorių skaičius: 12 vnt. Ventiliatoriaus skersmuo: 910 mm Tūris: 336,9 dm³ Išorinis paviršius: 3868,2 m² Išmatavimai: 8,19 x 2,23 x 2,5 m Svoris: 2600 kg. Kjdpjw Sr R Dsfx Af Iewt

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, We offer here a high-productivity 3D printer for industrial series production. The system was most recently used with Alupowder AISi10MG. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, which confirm that the machine was operational before disassembly. All axes are professionally secured. The machine can be transported on a regular standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating hours: Laser 1 beam on: 5165 hrs. Laser 2 beam on: 5096 hrs. Laser 3 beam on: 5023 hrs. Trumpf TruPrint 5000 with options Powder Bed Monitoring and Melt Pool Monitoring included Filter unit Accessories: 2 build cylinders 3 dosing cylinders 1 overflow container used 1 overflow container NEW Manuals 4 heat exchangers NEW 2 easy filters NEW 3 NTRON SIL02 oxygen analyzers + sensors NEW 1 oxygen sensor NEW and much more, such as seals, etc. The pallet truck by Armanni CAR.Elev. for swapping containers is also in stock and can be offered optionally. Kjdpfxevu Syyo Af Ijwt Faster to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 prepares you for industrial-scale series production. With features such as an optional 500°C preheating and the full-field multilaser setup featuring three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine produces high-quality parts from a range of metallic materials quickly and reliably—and meets the rigorous quality requirements in tool and mould making, also when 3D printing on preform blanks, as well as in aerospace and medical technology sectors. Optionally, the entire process chain can be executed under protective gas atmosphere: sieving, printing, cooling, depowdering. Combined with external part and powder management and TRUMPF’s monitoring solutions, it is perfectly suited for industrial additive series manufacturing. With the Preform option, the TruPrint 5000 supports hybrid component production. The additively manufactured component structures are built onto a blank. This innovative feature is particularly suitable for easy handling in tool and mould making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (reduced when preheating >200 °C) Processable materials[1]: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminium, nickel-based or titanium alloys Build rate[2]: cm³/h 5–180 Layer thickness[3]: μm 30–150 Max. laser power at the workpiece (TRUMPF fiber laser): W 3 x 500 Beam diameter[3]: μm 100–500 Minimum measurable oxygen content: ppm up to...

Sąlyga: labai geros būklės (naudotas), Swivel and tiltable vise Jaw width: 130 mm Maximum opening: 100 mm Swivel angle: 360 degrees Tilting: +45 degrees, -12 degrees Kodpfx Aon Sliaef Iswt Jaw height: 40 mm Total height: 175 mm Transport dimensions: Length: 410 mm Width: 155 mm Height: 175 mm Weight: 20.5 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, galia: 1,5 kW (2,04 AG), sukimo momentas: 277 Nm, Systèmes d’entraînement Nord SK 93672.1ABH-90LP/4 Kwedswrm E Rspfx Af Ijt

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, We are offering a high-productivity 3D printer for industrial serial production. Trumpf TruPrint 3000 G02 with options: Zirox Sensor, single laser, powder bed monitoring. Kwedpfx Afsvu Ticj Iet Trumpf TruPrint 3000 including filtration unit Serial number: S0721Q0022 Laser beam operating hours: 17,508 h The system was last used with aluminum AlSi10MG. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, confirming the machine was operational prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. Accessories: 4x dosing containers 1x build cylinder 1x overflow container Various spare parts such as protective glass, etc. Manuals The Armanni CAR.Elev. pallet truck for container exchange is also in stock and can be optionally included. Achieve quality 3D components faster D1. Machine design The TruPrint 3000 is a universal medium-format machine with external part and powder management for the industrial production of complex metallic components via 3D printing. Its large build volume offers high flexibility regarding size, quantity, and geometry of the intended applications. Technical Data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials5: Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate6 cm³/h: 5 - 60 Layer thickness7 μm: 20 - 150 Laser source (TRUMPF fiber laser) W: 500 Beam diameter μm: 100 - 500 O₂ concentration ppm: 100 Scanning speed (powder bed) m/s: 3 Monitoring: Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C: 200 Shielding gas: Nitrogen, Argon Power supply V / A / Hz: 400 - 32 - 50/60 Dimensions (incl. filter) mm: 3385 x 1435 x 2225 Weight (incl. filter) kg: 4300 Subject to changes. The details in our offer and order confirmation are binding. Technical Data TruPrint 3000 Tab. 3

Sąlyga: geras (naudotas), Block helical gear motor Kwodpfx Ast Ihdwof Ijt Reference: Cyh93Vw3Ak Manufacturer: Nord Drivesystems Model: SK 83 - 180MP/ 4 TF Year of manufacture: 2019 Serial number: 202621779-100 Motor power: 18.5 kW Output torque: 3882 Nm Weight: approx. 440 kg For technical details, please refer to the images. A technical data sheet is available as a PDF file. The listing is currently being updated. Further details and specifications on the unit will follow. Transport can be organised upon request. Subject to prior sale and changes. Welcome to Oussman-Machinery If you have any questions or requests, feel free to call us – we are happy to assist you. We speak English, German, Arabic, and French.

Gamybos metai: 2019, Sąlyga: geras (naudotas), Block helical gear motor Manufacturer: Nord Drivesystems Model: SK 83 - 180MP/ 4 TF Year of manufacture: 2019 Serial number: 202621779-100 Motor power: 18.5 kW Output torque: 3882 Nm Kodpfelkd Emjx Af Iowt Weight: approx. 440 kg For technical details, please refer to the images. Technical data sheet available as PDF file. The listing is being updated. Further details & device specifications will follow. Transport can be organized upon request. Subject to prior sale & modifications. Welcome to Oussman-Machinery For questions or requests, feel free to give us a call – we are happy to assist. We speak English, German, Arabic & French. Oussman-Machinery

Gamybos metai: 2019, Sąlyga: geras (naudotas), Block helical gear unit Manufacturer: Nord Drivesystems Model: SK 82 - F Year of manufacture: 2019 Kwjdpelkfzdefx Af Iot Serial number: 202624919-100 Weight: approx. 280 kg For technical details, please refer to the images. This listing is being updated. Further details & specifications of the unit will follow. Transport can be organized if required. Subject to prior sale & modifications. Welcome to Oussman-Machinery If you have any questions or requests, feel free to call us – we are happy to assist you. We speak English, German, Arabic & French. Oussman-Machinery

Sąlyga: naudotas, rida: 61 000 km, galia: 124 kW (168,59 AG), pirmoji registracija: 10/1979, kuro tipas: dyzelinas, tuščias svoris: 6 400 kg, bendras svoris: 13 300 kg, spalva: mėlyna, pavaros tipas: mechaninis, sėdimų vietų skaičius: 3, Įranga: priekabos jungtis, visų varančiųjų ratų pavara,

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 2 200 mm, bendras plotis: 2 200 mm, bendras aukštis: 2 100 mm, bendras svoris: 680 kg, EURO kauliukų pašalinimo ir plovimo mašina TWM 2000 D-DR Su automatiniu akmenų pašalinimu ir priešpriešine plovimo sistema Ilgas įėjimo ir akmenų nusileidimo latakas Dvi dvigubai guoliuotos ir varomos atraminės ašys Stiprios pavaros grandinės Keturi iškrovimo kaušai Didelis išleidimo žiedas, vandens sąnaudos apie 1,0–4,8 m³/val., priklausomai nuo užterštumo ir plovimo efektyvumo Variklis 2,2 kW/400 V Būgno ilgis apie 1100 mm Kjdpfsx Swptex Af Iswt Būgno skersmuo apie 1800 mm Mašinos ilgis apie 2200 mm Mašinos plotis apie 2200 mm Mašinos aukštis apie 2100 mm Svoris apie 680 kg Našumas iki 20 t/val.

Sąlyga: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 09/2022, krovimo vietos ilgis: 13 600 mm, krovinių skyriaus plotis: 2 460 mm, krovos erdvės aukštis: 2 700 mm, bendras ilgis: 14 100 mm, bendras plotis: 2 600 mm, bendras aukštis: 4 000 mm, pakaba: oras, padangos dydis: 385/65R22,5, ratų bazė: 8 790 mm, spalva: kitas, Gamybos metai: 2022, Įranga: ABS, galinis keltuvas,

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 34 kW (46,23 AG), kuro tipas: dyzelinas, tuščias svoris: 2 730 kg, didžiausias leistinas svoris: 4 000 kg, Gamybos metai: 2006, veikimo valandos: 260 h, Transporto priemonės aprašymas 2 vnt. visų varančiųjų ratų savivarčių WACKER NEUSON 4001 Savaratis 1 (geltonas): pagamintas 2006 m., pagal skaitiklį 260 moto valandų Pardavimo kaina: 10.900,-- be PVM Savaratis 2 (žalias): pagamintas 2009 m., pagal skaitiklį 3.638 moto valandų Pardavimo kaina: 11.900,-- be PVM - 4 tonos naudingo krovinio - 2,73 tonos nuosavo svorio - 34 kW - Hidrostatinė pavara su 2 važiavimo režimais Kwodpsx Nwgyefx Af Ist - Dyzelinis - Visų varančiųjų ratų pavara - Sukamoji kėbulė - Apšvietimo sistema - Abi mašinos parengtos nedelsiant naudoti! Taip pat galimas ekonomiškas pristatymas!

Gamybos metai: 2016, Sąlyga: naujas, mašinos/transporto priemonės numeris: 435505660, Completely new winch for asphalt compactor silo *NEW* Kwedpfxomwit Tj Af Iet Further information Intended use: Construction, Applicable material: Asphalt,

Sąlyga: labai geros būklės (naudotas), SLM Solutions Type: SLM 125 Water-to-air cooler Build volume (L x W x H): 125 x 125 x 125 mm (excluding substrate plate height) Reduced build volume (L x W x H): 50 x 50 x 50 mm (excluding substrate plate height) 3D optics configuration: Single (1 x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Kodju Ebufspfx Af Iswt Variable layer thickness: 20 µm – 75 µm, adjustable in 1 µm increments Minimum feature size: 140 µm Focus diameter: 70 µm – 100 µm Max. scan speed: 10 m/s Average shielding gas consumption during build: 0.6 l/min (argon) Average shielding gas consumption during flooding: 70 l/min (argon) Power supply / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / incl. powder): 700 kg, 750 kg with powder Operated with molybdenum! Laser operating hours: 2383 Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Sąlyga: paruoštas naudoti (naudotas), Danfoss Variable Speed Drive VLT 103 Frequency Converter 175B5037 SN: 021804G165, used, in good condition, 100% fully functional, scope of delivery as per photos Ksdpfxetyr Ace Af Iowt