Crossfield Scanner pirkti naudotą (325)

Sąlyga: nepatikrintas (naudotas), Bluhm Systeme Marking Laser We offer you a Bluhm Systeme marking laser. Bluhm Systeme Marking Laser Fiber Laser e-SolarMark FL Ppsdpfxeq Rtz He Ah Hsl No functional guarantee (untested) Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 guidelines (standards for end-user applications). It is designed to be integrated into a system or operated separately within a protective housing. After installation, the laser system must comply with the safety class requirements as specified in the above-mentioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films—either stationary or in motion. Technical Specifications e-SolarMark Description: The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) equipped with a focusing lens. 2. The control unit, including the power supply, electronic control system, and firmware for system operation, with internal I/O slots. The e-SolarMark features a fixed galvo scan head equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Standard Laser Specification: Laser Type: Fiber laser Laser Output Power: FL2 model: 19W (typical) Wavelength: 1062 nm (typical) Internal Modulation: 20 to 80 kHz Scanner Head Description: Scan Head: Dual galvanometric mirror scanners with durable, highly reflective dielectric coating. F-Theta Lens Types and Specifications: Lens for marking area: 70x70 mm up to 300x300 mm Focal distance: 192 mm Operating Environment Conditions: Relative humidity: up to 80% non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions (W x H x D): Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length (marking/control unit): 3 m Weight marking unit: 5 kg Weight control unit: 15 kg Mains voltage: 115/230 VAC, 50/60 Hz, single phase Power consumption FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and error!) For further questions, please feel free to contact us by phone.

Sąlyga: beveik kaip naujas (naudotas), Scanlab PowerScanII 50i Aperture: 50 mm Encoder: Galvanometer scanner with analog position detector Optics – Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics – Number of Installed Tunings: 1 Typical Tuning: Fast-Vector-Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% full scale): 1% full scale: 1.0 ms 10% full scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position Resolution (max.): 18 bit for XY, 16 bit for Z Nonlinearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min. warm-up): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Controller: Galvanometer scanner Digital controller board Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: yes (iDRIVE) Supply Voltage: (48±2) V DC, max. 10 A each (20 A peak current) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: opposite to beam exit Ppjdpfxoxp Iybe Ah Hol Weight without Lens (standard housing): 35 kg Dimensions (L x W x H – standard housing): (433 x 268 x 266) mm³ (with varioSCAN) Beam Offset: 72.72 mm Other Features Water Cooling: yes Air Cooling: yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Sąlyga: naujas, Tiekiama su ašies vakuuminiu tvirtinimu Pjovimo įrankių tikrinimas, išankstinis nustatymas ir matavimas Ppodpfx Ahex Sd Ipe Hel CCD kamera su telecentriniu objektyvu Jutiklinis ekranas, spartieji piktogramų klavišai patogiam valdymui Granito pagrindas, stabilesnis Greitas linijų, lankų, kampų ir kitų elementų matavimas Matavimo vaizdai gali būti išsaugoti Matavimo režimai: absoliutus, santykinis ir inkrementinis Matavimo ataskaitas galima atspausdinti Palaiko sistemos nuskaitymą tiesioginiam paėmimui ir komunikacijai su staklėmis Automatinis pjovimo įrankių atpažinimas su skeneriu

Sąlyga: geras (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras plotis: 7 700 mm, bendras ilgis: 19 300 mm, Metai – 2016 Ppodpfx Ahsyc Uq Ie Hol Modelis – 630 CBM ir 353BCS-R 4 stočių dvigubas krautuvas Pjovimas, šlifavimas, žymėjimas ir išmušimas Pakreipimo funkcija Formos skeneris Krautuvo perimetro aptvėrimas Pristatymas ir montavimas galimi.

Sąlyga: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Einseitiger Scanner für Sortierung oder Optimierung: Breite: 30–200 mm Höhe: 13–50 mm Länge: 2–6 m Pjdpfx Ajv Tlgdsh Hopl Erkennung möglich für: Äste, Holzstruktur, Risse, Endrisse, Farbabweichungen etc. Scan-Geschwindigkeit: bis zu 200 m/min Verschiedene Profiltypen scannbar

Sąlyga: naudotas, Finscan Boardmaster - 12 kamerų Ppjdpfx Aexpgmgjh Hjl LED lempos Lazerinis storio matavimas Naujausios kartos valdymo kompiuteris (įdiegtas 2021 m.) Skaitytuvas iš 2014 m. Pilnas komplektas su konvejeriais

Sąlyga: reikia remonto (naudotas), Funkcionalumas: neveikiantis, Gamybos metai: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model/Type: CNC 80 E-MR Year of construction/new: 2004/2006 Ppsdpfxexzubvo Ah Hol Condition: needs repair CNC: CNC PC control, Beckhoff Technical Specifications: Maximum tube diameter x wall thickness: 60 mm x 3 mm Minimum tube outside diameter: 16 mm Minimum bending radius to tube center: 25 mm Maximum bending radius to tube center: 240 + 50 mm Maximum bending angle: 180 ° Maximum tube lift length: 1000 mm Bending direction: right Machine weight: 7,000 kg Total installed power: 39 kW Voltage: 400 V / 50 Hz Current: 100 A Machine dimensions: 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed system for slideways - Automatic tube feeding and rotating device - Electric mandrel bending unit - Pneumatic mandrel rod securing - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety fence Machine needs repair: The planetary gearbox of the transport trolley is defective and must be replaced. Spare parts costs according to quotation (excluding installation): - Planetary gearbox: €1,674 - Gearbox flange: €1,850 - Pinion: €850 All prices plus VAT. Without installation. Cheap sale in current condition – sale as is. Immediately available including loading – free loading onto truck.

Sąlyga: naujas, Sick MICS3-CBAZ40PZ1P01 Id. 1092720 microScan 3 Pro saugos lazerinis skeneris SN:21490928, nenaudotas, atidarytoje originalioje pakuotėje, 100% veikiantis, komplektacija pagal nuotraukas Psdpfxjx Eumvj Ah Hspl

Sąlyga: naujas, Gamybos metai: 2026, A700 Vollautomatische Massivholzsäge 3 m Vollautomatisches Schneiden von großformatigem Massivholz mit benutzerfreundlicher Automatisierung. Legen Sie beliebiges Holz auf – die Maschine erkennt es automatisch und schneidet es präzise auftragsbezogen mithilfe einer hochgenauen Servomotor-Materialpositionierung. Über WIFI können Excel-Auftragslisten für eine effiziente Eingabe großer Schneidlisten eingelesen werden. Ihre vollautomatische Säge kann optional als Inline-Optimierer-Säge geliefert werden. Bei jedem aufgelegten Holzstück, unabhängig von der Länge, misst ein Lasersensor dessen Länge. Unser leistungsstarker Optimierungsalgorithmus vergleicht Ihre Zuschnittliste und berechnet die optimale Schnittreihenfolge, um den Verschnitt zu minimieren. Dieser Prozess erfolgt in Echtzeit während des Maschinenbetriebs – ganz ohne weitere Benutzereingabe. • Vollautomatischer Schneidbetrieb mit Stangenförderung und exakter Längenzuschnitte • Einfache Bedienoberfläche für automatisierten Betrieb – Auftrag eingeben und in Sekunden zuschneiden • Vereinfachte Einzelteil-, Serien- oder Groß-Excel-Listen-Bearbeitung • Bündel-/Mehrstangen-Zuschnitt inklusive automatischer Zählung • Externer WIFI-Import von Excel-Auftragslisten mit umfangreichen Daten-Mapping-Funktionen • Vollständig einstellbare Schnittgeschwindigkeit und Vorschub für maximale Produktivität • Automatischer Etikettendruck für Teile anhand der Auftragsdaten (manuelles Anbringen der Etiketten, optional) • Direktdruck auf das Material inline möglich – ohne Bedienereingriff (optional) • Barcode- oder QR-Code-Druck sowie Scanner für Auftragseingabe möglich (optional) • Automatische servo-gesteuerte Positionierung des Säge-Gehrungswinkels bis ±75° (optional) Besonders geeignet für: • Rahmen- und Fachwerkherstellung • Gehrungsholzkonstruktionen • Massenzuschnitt von Schnittholz • Möbelherstellung • Fertigung von Pflanzkästen und Kisten Pedpfx Aol Tmydoh Hjpl Modell: A700 Schnittlänge: 3 m Materiallänge max.: 1680 mm Schubkraft: 20–40 kg Software: Optimierer HOCHWERTIGE MASCHINEN MADE IN AUSTRALIA.

Sąlyga: naudotas, Gamybos metai: 2003, Die Macchi 3-Layers ist eine leistungsstarke Blasfolien-Coextrusionsanlage zur Herstellung von Universalfolien mit hohen Breiten- und Durchsatzanforderungen. Sie verarbeitet LLDPE, LDPE, mLLDPE, MDPE, HDPE sowie optional (im Upgrade) auch PP. Das System verwendet einen 3-Schicht-Werkzeugkopf mit 700 mm Durchmesser und erreicht – abhängig von der Rezeptur – eine Ausstoßleistung von bis zu 900 kg/h. EXTRUSIONSGRUPPE: • Extruder: 80 mm + 100 mm + 80 mm • Infrarot-Heizung • Hydraulische Siebwechsler Detaillierte Upgradespezifikation: • Ein Extruder Plastex 100/30D (Mittelschicht B) • Zwei Extruder Plastex 80/30D (Schichten A und C) • Bimetallische Zylinder • Nitrierte Schnecken • Wassergekühlte genutete Zuführabschnitte • 5 Heizbereiche mit IR-Heizern und Gebläsen • Motoren: - 150 kW DC-Motor (100 mm Extruder) Pjdpfox Akywsx Ah Hjpl - 100 kW DC-Motoren (80 mm Extruder) • AC-Antriebstechnik mit digitaler Steuerung (IP55) für reduzierten Energieverbrauch und harmonische Verzerrung WERKZEUGKOPF (DIE HEAD): • Modell: TE505 • Düsendurchmesser: 700 mm, Düsenabstand: 1,8 mm • 4+4 Heizkreise mit keramischen Heizbändern (Gesamtleistung 19 + 35 kW) • Montiert auf einem Werkzeugwagen mit integriertem Luftverteilersystem • Einsatzbreite: 600–800 mm • Ausgestattet mit IBC-System KÜHLSYSTEM: • Dual-Lip Kohlefaser-Luftring Karat (K-Design) • ASR4 Double Flux Cooling Ring, Gebläse 15 kW • Jet-7 IBC-Kühlsteuerungssystem - 15 kW Zuluftgebläse - 18 kW Abluftgebläse - Blasendurchmesser-Sensor - Luftausgleichsventile - Frequenzumrichter ABZUGSEINHEIT: • Abzugsbreite: 3200 mm • Oszillierende Abzüge • Optional: Turmmontierter Zweitabzug mit Wägezellensteuerung WICKLEREINHEIT: • Doppelter, vollautomatischer Rückwärtswickler • Automatischer Rollenwechsel • Maximale Wickelbreite: 3150 mm FOLIENSPEZIFIKATIONEN: Folienbreite bei 700 mm Düse: 2000–3100 mm Stärke: 15–200 μm Beispielausstoß: 3000 mm Breite, 100 μm LDPE → 800 kg/h ±10% ANLAGENSPEZIFIKATIONEN: Installierte Leistung: 550 kW, 415 V, 3-Phasen + Neutralleiter Schneckendrehzahlen: 80/30D Extruder: 0–130 U/min 100/30D Extruder: 0–120 U/min Kühlwasserverbrauch: 6 l/min Druckluftbedarf: 6 bar ERWEITERTE STEUERUNGS- UND MESSSYSTEME: • Doteco gravimetrisches Dosiersystem Grado • Dickenprofilsysteme (EC Plus Module): - S2 Automatische Werkzeugkopfregelung - S3 Rotierender Kapazitativer Dicken-Scanner - S4 Track Scanner - Q1 Serielle Kommunikation (Extruder/Gravimetriewerte) - Q11 Druckermodul - Q12 Online-Modemdiganose - Q7 Energieverbrauchsüberwachung • K-Design VARIOcool automatische Dickenregelung • Kundig Reversierring und Dickenmessung ZUSATZAUSRÜSTUNG: • Turm • E+L Bahnlaufregelungssystem • Corona-Vorbehandlungsgerät AFS oder Station 2800 • Kalibrierkorb mit optionalem Hilfskorb • Blasengleiter GSRC 3200 (6 Ebenen, motorisiert, IBC-gekoppelt) • Mikroperforationssystem (FBF-Kalt-Nadel) • Luftwellen (8 Stück)

Gamybos metai: 2020, Sąlyga: naudotas, Gamintojas: Rocla Oy (Logisnext grupė, Suomija) Tipas: Autonominis valdomas vežimėlis (AGV) – priekinio šakinio tipo modelis su ryšulių spaustuku (AWTsc) Pramoninės paskirtys: Automatizuotas ryšulių, rulonų, padėklų ar cilindrinių krovinių tvarkymas popieriaus gamyklose, pakavimo įmonėse, logistikos centruose ir automatizuotuose sandėliuose. Sukurtas nepertraukiamam darbui (24/7) siauromis praėjimo zonomis ir aukšto tankumo sandėliavimo sistemose. Pagrindinės techninės charakteristikos: - Modelis: AGV AWTsc – 40TF8300E - Metai: 2020 - Nominali keliamoji galia: - 3200 kg ties 760 mm svorio centru - 6400 mm kėlimo aukštis - Akumuliatoriaus tipas: 420 Ah - Tuščioji masė: 4520 kg - Maitinimas: 24 V DC - Nominali galia: 6,8 kW - Važiavimo valdymas: visiškai automatizuotas - Posūkio spindulys: kompaktiškas, tinka siauriems praėjimams - Saugos įranga: - 360° lazeriniai skaitytuvai - Kliūčių aptikimo jutikliai - Išmanioji automatinė stabdymo sistema - Valdymo sąsaja: centralizuota, programine įranga valdoma parkų sistema - Autonomija: ~8–16 valandų (priklausomai nuo akumuliatoriaus konfigūracijos) Pjdow Ec Eaopfx Ah Hspl Eksploatacija Rocla AWTsc yra sunkaus darbo AGV, skirtas ryšuliams ar rulonams tvarkyti be padėklų, naudojant integruotą spaustuką. Priešsvorio konstrukcija leidžia pasiekti stelažus be šoninių atramų. Puikiai tinka aplinkoms, kurioms reikalingas tikslus, pasikartojantis cilindrinių krovinių tvarkymas, užtikrina visiškai automatizuotą darbą be žmogaus įsikišimo. Ypatybės / pranašumai: - Spaustuvo priedas tiesioginiam rulonų/ryšulių tvarkymui - Visiška autonomija su išmania parkų valdymo sistema - Didelė kėlimo ir keliamoji galia (iki 3200 kg prie 6,4 m) - Pažangus saugos paketas komplektuojamas standartiškai - Tinka aukšto tankio sandėliavimo ir siaurų praėjimų aplinkai - Lengvai integruojamas su sandėlio valdymo sistemomis (WMS)

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1705, Y ašies eiga: 985 mm, X ašies padavimo greitis: 25 m/min, Y ašies padavimo greitis: 60 m/min, padavimo greitis Z ašis: 20 m/min, ruošinio ilgis (maks.): 3 200 mm, ruošinio plotis (maks.): 1 200 mm, HOLZ-HER vertical CNC Evolution 7405 PinJet, year of manufacture 2025, delivery ex works. Workpiece clamping on the rear side enables machining of the entire perimeter without reclamping (up to 1500mm workpiece length). Workpiece size X = 200 - 3200 mm Workpiece size Y = 70 - 1200 mm (maximum pass-through dimension) Maximum machining dimension X = 1500 mm (without reclamping) Maximum horizontal drilling dimension X H = 1168 mm Pjdpox Nqlpsfx Ah Hepl Z-axis stroke Z = 240 mm ECO-MODE energy-saving function Workpiece length measurement by laser 2x Campus V8 CAD/CAM software with process simulation for machine and office Handheld remote control device 2D barcode scanner Operator console with 21.5" flat screen Uninterruptible power supply (UPS) Milling unit 7830, output 10.3 kW Drilling unit 7885 with 19 spindles Vertical adapter with double pressure Integrated saw unit in X direction Complete dowel insertion unit with step feeder 6-position linear pick-up tool changer Vacuum system Power 16 m³/h ECO-VAC intelligent vacuum system Hi-Speed USB-Device Network Server Automatic central lubrication Xcut package tool kit for doors Safety device Pumper Tool kit for XL drilling head

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 228, X ašies eiga: 4 045 mm, Y ašies eiga: 2 490 mm, Z ašies eigos atstumas: 317 mm, X ašies padavimo greitis: 70 m/min, Y ašies padavimo greitis: 70 m/min, padavimo greitis Z ašis: 20 m/min, ruošinio ilgis (maks.): 3 100 mm, ruošinio plotis (maks.): 2 200 mm, ruošinio aukštis (maks.): 120 mm, HOLZ-HER CNC nesting machine Dynestic 7507 push, year of manufacture 2025, brand new, ex works delivery Campus V8 CAD/CAM software with process simulation Campus V8 Plus CAD/CAM software with material removal simulation (Better Sim) Campus V8 Better Nest freeform software Ppodpsx Nqdljfx Ah Hsl Hand-held control unit for remote operation 2D barcode scanner Operator console with 21.5" touch screen Uninterruptible power supply (UPS) Ultrasonic measurement on the controlled gantry Milling unit 7830, output 10.3 kW Drilling unit 7884 with 14 spindles Vertical adapter with double feed force Integrated saw unit in X-axis direction Additional machining zone at the rear with 1 stop 8-position linear pick-up tool changer Vacuum pumps 140+140+500 m³/h ECO-VAC intelligent vacuum 16-circuit vacuum system, software controlled Hi-Speed USB-Device Network Server Automatic central lubrication Nesting cutter tool set in tool case Tool set for drill head Outfeed table with controlled and motorized conveyor belt Additional extraction via push-off conveyor belt TouchLabel PRO touchscreen and label printer mounted on stand Extraction funnel at the end of the push-off conveyor belt 12-month warranty period Immediate availability

Sąlyga: naudotas, Gamybos metai: 2015, Funkcionalumas: nepatikrintas, ruošinio plotis (maks.): 920 mm, sukimosi greitis (min.): 1 000 aps./min, sukimosi greitis (maks.): 18 000 aps./min, įrankių magazino lizdų skaičius: 6, įrankio skersmuo: 80 mm, Įranga: sūkių greitis be galo kintamas, Holz-Her EVOLUTION 7405 4mat (kliento mašina / tarpinis pasiūlymas) - Frezavimo velenas 7,5 kW Pjdpfsx I A Elsx Ah Hspl - Campus NC-Hops V6 programinė įranga - Rankinis skaitytuvas - Vakuuminis siurblys 8 m³/h - Ruošinio ilgio matavimas (lazeriu) TECHNINIAI DUOMENYS Ruošinio dydis: X = 200 - 3200 mm (ilgesnių ruošinių atveju su papildoma atrama) Y = 70 - 920 mm Medžiagos storis: Z = 8 iki 70 mm Maksimalus darbo eiga X kryptimi be pakartotinio tvirtinimo: X = 1500 mm Z eiga: Z = 240 mm Maksimalus programuojamas greitis: Vektoriaus greitis: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Mašiną gali atnaujinti, išmontuoti, sumontuoti bei apmokyti mūsų įmonė (gamintojas). Jokios garantijos ar papildomos atsakomybės iš gamintojo pusės, kadangi tai tarpinis pasiūlymas!

Sąlyga: naujas, The AE-400 SERVO edger is designed for longitudinal edging and ripping of side boards fed into the machine at high speeds (100-400 m/min). The machine works in direct integration with infeed and outfeed conveyors for boards in automatic mode. It is equipped with a top and bottom board scanner. A maximum instantaneous capacity of up to 50 boards/min can be achieved when cutting 2.5m boards to the same width without changing saw spacing. Each adjustment of the edger's devices to the board's width alters the efficiency. The average machine capacity, depending on work configuration, ranges from 35 to 48 boards/min. Technical Data No. | Parameter | Value ---|---|--- 1. Spindle drive motor power | 55 kW 2. Saw spindle speed | 3550 rpm 3. Saw blade diameter | 400 mm 4. Max. cutting height | 50 mm 5. Number of saw blades used | 2 to 3 pcs (2 floating saws) 6. Minimum board length | 2000 mm 7. Maximum raw material length | 6200 mm 8. Maximum number of boards after splitting 1 board | 2 pcs 9. Feed speed | 100-400 m/min Cutting to 1 board – with two saw blades (2 floating saws): 1. Minimum saw spacing (board width after cutting): 75 mm 2. Maximum outer saw spacing (board width after cutting): 300 mm Cutting to 2 boards – with three saw blades (2 floating saws): 1. Fixed coupling saw spacing (board width after cutting): 50-100 mm 2. Spacing between floating saws (board width after cutting): 50-100 mm 3. Minimum cut for 2 boards: 2 x 50 mm 4. Maximum cut for 2 boards: 2 x 100 mm Ppedsnygvropfx Ah Hol Other machine configurations are available upon request. Made to order. We also manufacture other sawmill lines: log sorting conveyors, board sorting conveyors, board stackers, conveyors.

Sąlyga: naudotas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 410798, įvesties srovės tipas: trifazis, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting system for flexible and efficient production of shipping and protective packaging from continuous corrugated cardboard—ideal for businesses dealing with variable small batches or on-demand production. Thanks to the patented multi-tool system, creasing, perforating, and cutting can be performed in a single pass, both longitudinally over the processing roller and transversely across the integrated cutting bar. 🎛 Processing & Tools - 6× multifunction tools for longitudinal processing - 1× multifunction tool for transverse processing - Creases are applied gently via creasing sleds, reducing splitting of the cardboard - Perforation with oscillating cutting knife; intensity adjustable - Cutting with toothed knife on a rubber-coated roller → fibre-free, grippy cut edge Ppjdpsx Emgujfx Ah Hsl ⚙ Drive & Mechanics - Maintenance-free, high-dynamic linear drives for precise feed - Segmented top pressure for reliable carton feed-in - 2 rubberised rollers serve as counter-cutting and transport media 📐 Technical Data - Max. working width: 1,500 mm - Min. working length: 380 mm Cardboard thickness: - min. 1.5 mm (E-flute 1.3) - max. 7.0 mm (BC-flute 2.7) - Tool width: approx. 45 mm ➕ Carton Feed (Feed Rack) - Max. stack height: 2,100 mm + 120 mm pallet - Max. feed rate: 100 m/min - Min. web width: 300 mm - Max. web width (VPS 1500): 1,500 mm - Total "side by side" width: max. 1,350 mm 💻 Control & Software Hardware - BECKHOFF Industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores) - 16 GB RAM, 240 GB SSD - Windows 10 IoT Enterprise - 21" multitouch panel - Control cabinet integrated into main unit Software Functions - Multi-stage cut optimization - Dynamic tool management - Bidirectional multi-line processing - User management (User, Service, Admin, Kraft) - Comprehensive production, carton, and design management - Message statistics, manufacturer documentation, training videos, service portal, etc. Documentation - Operating manual in local language - Circuit diagrams in German or English - Spare part drawings Additional Equipment - Standard interface for barcode scanner, file import (XML), database import - Operator panel mounted on a swivelling arm (left side) 🔄 Setup Times & Performance - Changeover time with automatic carton changer: approx. 4.5 seconds - Pure tool repositioning: approx. 2.5 seconds - The machine is delivered with multiple FEFCO formats and is immediately ready for production (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation) 🚚 Installation, Transport & Year of Manufacture - Demonstration and test machine, year of manufacture 2019 - Single-shift operation since 2022 - Disassembly, packaging, and delivery carried out by the seller - 3.5 t forklift with long forks required for unloading 🎨 Colour Scheme - Main unit: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey) - Safety guard: RAL 7015 - Guard posts: RAL 7035 💡 Key Advantages of this Machine - Very short setup times → ideal for production of varied packaging - Fibre-reduced cut edges → reduced injury risk & improved appearance - Intuitive operation interface - Fully automatic processing with high precision - Instantly ready to use thanks to existing design templates - Low-maintenance linear drives - High process stability due to segmented top pressure

Gamybos metai: 2004, Sąlyga: naudotas, 2 pcs. PC-controlled tool dispensing cabinets, networked with each other! Spiral dispensing: Ppjdpfx Ahjdt El Ho Hel 126 spiral positions max. 63 per cabinet 2520 item capacity max. 1260 per cabinet Power connection 230 V / 50 Hz, 16 A Dimensions (L x W x H): 990 x 980 x 1830 mm per cabinet Weight: approx. 475 kg per cabinet Accessories / Special Features: Ideal storage solution for non-sensitive items with compact dimensions. A compact, sturdy individual packaging of the items is required. These items drop into a padded collection chute. - Operation via large touchscreen - Handheld scanner - Documentation Original price: approx. EUR 21,000.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Įranga: automatinis dvikryptis spausdinimas, Demonstracinė sistema AccurioPress C4080 Mažai naudota, tik demonstracijoms. Skaitliuko rodmuo pagal užklausimą. Konfigūracija gali būti laisvai pritaikoma. Pavaizduota komplektacija: C4080 su KM valdikliu IC-609, įsk. UK-220 (APPE) DF-716 (dokumentų skaitytuvas) PF-707 (vakuuminis popieriaus padavimas) RU-518 perdavimo blokas (aušinimo/lyginimo modulis) IQ-501 su VI-515 FS-532 tvarkyklinis užbaigėjas su SD-510 brošiūrų moduliu Ppodpfx Ahexgqk De Hsl Pardavimas/nuoma tik Vokietijoje! Kaina pagal užklausimą! Deja, turime pranešti, kad pardavimų už Vokietijos ribų neatliekame. Prašome supratingumo ir prašome nebetęsti paklausimų šiuo klausimu.

Sąlyga: naujas, Gamybos metai: 2022, Vertical Milling and Drilling Machine Bavelloni Series VDM1636. + Additional options: - Pre-setting of drills, dressing, - Barcode scanner, - Additional Camnay Office software package. The VDM 1636 CN is a vertical NC milling and drilling machine designed for the automatic execution of complex drilling and milling cycles. It is equipped with a double drilling head (1 + 1 opposed spindles), each fitted with a rotary tool magazine (8 positions each). This machine, which stands out for its user-friendly operation, has been designed according to the most advanced technical solutions to ensure exceptionally high machining accuracy. The double rotary tool magazine with 8 positions enables drilling, countersinking, and milling at a single workstation. Easy to use, fast and precise in operation thanks to the implemented technological solutions: 5.5 kW spindles, spindle movement on ball guides, latest-generation brushless NC motors, and easy, intuitive software. Pedpstui R Dsfx Ah Hepl Possible operations In a single automatic cycle, the VDM 1636 CN can perform the following operations: • Drilling • Conical countersinking • Milling • Cut-outs Holes can be made at any point on the glass surface. The new control console used in the VDM1636 milling and drilling machine combines all the advantages of numerical control. This interface can operate in a network with other machines. It can also be connected to the BAVELLONI network, enabling remote manufacturer service. The main features of this system are: • Programming while the program controls machine movements, allowing the operator to work easily on the computer. • Simple and direct graphical interface. • Data transfer via market-available tools. The VDM 1636 CN is equipped with one of the most advanced software systems (CAD/CAM) specifically designed for glass processing on numerically controlled machining centers. It is exceptional in performance, reliability, and user-friendliness due to the application of state-of-the-art technical solutions.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 36 700 h, Valdymo blokas Gamintojas: SIEMENS Modelis: Sinumerik 840D Powerline Pagrindinis variklis Ašių skaičius: 5 Judėjimas X ašies eiga: 1250 mm Y ašies eiga: 880 mm Z ašies eiga: 800 mm Įrankiai Įrankio laikiklio tipas: HSK63 Papildoma įranga Podpsx D Npgefx Ah Hopl Infraraudonųjų spindulių skaitytuvas Įrankių matavimas Nuplovimo pistoletas Vidinis aušinimo tiekimas (IKZ): 40 bar Bakas su popierine juosta filtru: 900 litrų Šis 5 ašių universalus apdirbimo centras DMG GILDEMEISTER DMC 125U pagamintas 2004 m. Idealiai tinka sudėtingoms ir tikslioms apdirbimo užduotims, suteikia didesnį lankstumą ir našumą. Pasinaudokite proga įsigyti universalų apdirbimo centrą DMG GILDEMEISTER DMC 125U. Dėl daugiau informacijos susisiekite su mumis. Pritaikymo sritys Frezavimas

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, SPECYFIKACJA Interfejs oprogramowania przyjazny użytkownikowi Spełnia wszystkie wymagania Przemysłu 4.0. Wyposażony w intuicyjny, ikonowy interfejs, sekwencyjne wprowadzanie danych oraz program symulacyjny. Szybki wybór programów i realizacja zadań, listy zadań oraz szeroki zakres makr. Programowanie parametryczne i licencja PC „Office Creator” w zestawie. Opcjonalny bezpośredni import popularnych formatów plików CAD 3D: *.stp, *.iges, *.obj, .skp oraz 2D: *.dxf, .dwg. Bezpośredni import kompletnych projektów szafek również możliwy przy użyciu prostego oprogramowania dekodującego (opcja). Bezpłatne aktualizacje oprogramowania gwarantują maksymalną wydajność w każdym czasie! Wielofunkcyjność Maksymalna szerokość robocza: 1000 mm (dowolne wrzeciono, na całej powierzchni płyty). Maksymalna waga obrabianego panelu: 70 kg, przystosowana do ciężkich blatów kuchennych i elementów na zamówienie. Cykl pracy: przelotowy lub z powrotem do operatora. Szybka konfiguracja Wszystkie operacje robocze w jednym cyklu. Pozioma konstrukcja maszyny ułatwia załadunek elementów operatorowi. Szybka realizacja programu przy użyciu skanera kodów kreskowych. Najwyższa precyzja Duże i solidne stoły robocze zapewniają maksymalną stabilność elementu, a laserowy czujnik długości panelu gwarantuje najwyższą dokładność wiercenia. Jakość Solidna konstrukcja, wykonana ze stali spawanej elektrolitycznie, przeznaczona do intensywnej eksploatacji i wymagających zadań. Odpowiednio dobrany siłownik pneumatyczny umożliwia bezpieczne mocowanie paneli do 70 kg, w połączeniu z podwójnymi dociskami górnymi. Mechanika o wysokiej precyzji, silniki bezszczotkowe o mocy 1 kW oraz prowadnice rolkowe. Podpfxewn Hmao Ah Hepl DANE TECHNICZNE • Udźwig do 70 kg, umożliwia obróbkę dużych i ciężkich paneli, np. blatów kuchennych • 11 wrzecion pionowych; 6 wrzecion poziomych (przód/tył, lewa/prawa strona), oraz piła rowkowa • Elektrowrzeciono 3,3 kW, 3000–24 000 obr./min, obroty prawo/lewo • Tuleja ER25 DIN 6499, maks. Ø 35 mm • Rozmiar narzędzi: Ø 8–16 mm, maks. szerokość 98 mm • Laserowy system referencyjny sterowany programowo, automatyczna korekcja błędu długości • Automatyczne dmuchawy powietrza do efektywnego czyszczenia głowicy wiertarskiej • Stoły z poduszką powietrzną z przodu i z tyłu (940 × 550 mm) • Automatyczne smarowanie osi Y i Z • Wymiary robocze: o X: min. 300 mm o Y: 75–1000 mm o Z: 8–60 mm • Komputer przemysłowy: dysk 160 GB, RAM 2 GB, kolorowy ekran 17”, klawiatura i mysz • Masa: ok. 1450 kg • Prędkości posuwu osi: o X – 42 m/min o Y – 42 m/min o Z – 10 m/min • Moc zainstalowana: 6,5 kW

Sąlyga: naudotas, Gamybos metai: 2024, New demonstration machine!! List price: €52,742 net. Forescolur, consisting of a milling table (X-axis), gantry (Y-axis), Z-axis unit on compact board and base frame, with adjustable machine feet. Milling bed as a sacrificial plate in 19mm MDF. Table openings prepared longitudinally and transversely. Mechanical set consisting of profile guides including linear guide carriages, ball screws and precision rack and pinion. All elements assembled, pre-lubricated including a test run, immediately operational. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply unit and toroidal transformer, all pre-assembled in control cabinet, as well as sensors for each axis. Control relays for automatic activation of an existing extraction system. Brush seals for dust protection, as well as protective devices in accordance with CE regulations by means of a mobile extraction device and a one-sided mounted laser scanner for work area monitoring, with a 275° and 5.5m field range. (Machine positioning in a room corner.) Handheld control unit equipped with all necessary functions for machine operation, including emergency stop button and dead man's switch. Tool length sensor for determining tool length and adjustment of the active zero point offset. Podpjw Tfy Uofx Ah Hspl High-frequency spindle with 2.2 kW, including clamping nut, frequency inverter, line filter, braking resistor, as well as collet set. Monitor as built-in monitor, including mini PC with Windows 10, and control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 7.0 and CAM license Estlcam V11, as well as all necessary documentation will be sent by email prior to delivery. Vacuum table: Milling bed constructed as a vacuum table, consisting of four individually controllable segments. Cross table made from PE with a top plate of ... vacuum pump from Becker company with a capacity of 100 m³/hr, oil-lubricated. For the power connection of the vacuum pump, a 16 amp, 400 V AC plug is required. The customer must provide HDF 3mm raw on both sides for the entire vacuum table (2500x1300mm) as a sacrificial plate. (Recommended application: machining of coated wood-based panels.) Tool set in Systainer consists of: 1 pc. 1.5mm left (HF152LIVHM) 1 pc. 3.175mm 30° (HF30GVHM) 1 pc. 6mm 90° (HF90GVHM) 5 pcs. 4mm Z2 (HF41REVHM) 1 pc. 5mm Z2 (HF52REVHM) 1 pc. 5mm Z3 (HF53SRECAR) 2 pcs. 5mm Z2 (HF52REDIA) 1 pc. 5mm Z2 (HF52UPDOWN) 1 pc. 4mm Z3 (HF43REVHM) 1 pc. 6mm Z1 (HF61REVHM) 1 pc. 8mm Z2 (HF82LAVHM) 1 pc. 10mm Z2 (HF10SVHM) 1 pc. 12mm Z2 (HF12SVHM) Maintenance package in Systainer: Grease gun 150ml, a cartridge of high-performance grease 400g, silicone spray grease 500ml, one lubrication nipple incl. hose piece and 30mm face mill with indexable inserts. Pneumatic unit: consisting of four cylinders, throttle check valve, push-in fittings, angled push-in fittings, silencer connections, filter regulator, push-in distributor, PE hose and brackets, for use in a pre-configured table opening (for end-face machining). If pneumatics are required for both table openings, the position must be calculated twice. (NOTE: Compressor must be provided by the customer.) Technical data: Travel distance: (X / Y) 2500 x 1300 mm, Z = 200 mm Dimensions: (L / W) 3800 x 2300 mm, H = 1900 mm Footprint: approx. 20 m² (minimum installation area) Weight: 1500 kg Rated voltage: 400 V Repeat accuracy: +/- 0.1 mm Con

Sąlyga: geras (naudotas), Gamybos metai: 2010, mašinos/transporto priemonės numeris: 792-128, Pasiūlymas 25368 Techniniai duomenys: - Spaudimo jėga esant 10 bar 70 KN - Stūmiko eiga 20 mm - Oro sunaudojimas vienam eigai 10 l - Oro padavimo slėgis 6 - 10 bar - Brūkšninių kodų skaitytuvas - Pavara 220 V / 1 kW Pedpjx E S Eijfx Ah Hjpl - Vietos poreikis apytiksliai P 1000 x A 2100 x G 1200 mm - Svoris apie 450 kg - Pateikimo stotis su ritės laikikliu 4000 mm - Išvyniojimo takelis 1900 mm - Programinės įrangos vadovas PRS - AWS

Sąlyga: naudotas, Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, MiniBendCenter RAS 79.05 Fully automatic panel bending center for small parts General information: - Direct from manufacturer - Manufacturer’s warranty - Maintenance included - Latest possible software version General technical data (in mm): - Sheet length: 50–600 - Sheet width: 40–600 - Max. sheet thickness (400 N/mm²), tool-dependent: 3.0 - Max. upper beam stroke: 500 mm - Min. flange height, approx., tool-dependent: 5 x s - Max. flange height: 127 - Bending cell weight: 10 tons - Cladding and electrical system weight: approx. 2027 kg - Weight of machine elements: approx. 945 kg Machine-related data: - Motor operation; 400V, 50/60 Hz, 3-phase - Year of manufacture: 2014 - Condition: Refurbished – Good used condition Machine configuration: Bending cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Sheet scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotation axis + separate drive for rotation axis - Double sheet detection Tool changer: - 3 servo motors for X, Y, Z axes - 1 pneumatic swing drive for rotation axis - Tool gripper - Two-level tool magazine - Automatic tool clamping in magazine Cladding: - Bending cell enclosure, front and rear Podox Hyhuepfx Ah Hjpl Movable control console: - 18" touchscreen & more control system Intelligent loading robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9 mm) suction cup row (7x20 mm) Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 slot for new pallets (parts to be processed) - 1 slot for "pallet in processing" - 2 slots for finished pallets (empty or with remaining pieces) Curved conveyor belt with 6 connection stations Finished part output enclosure Complete tool set RAS CAM-Office software including SolidWorks license and 2-year maintenance contract - Sample images - Sample video available on request

Sąlyga: naudotas, Angebot für 1 von 2 BD Max PCR-Maschinen Das BD MAX System ist für die In-vitro-Diagnostik (IVD) zugelassen und dient zur Durchführung von durch die FDA zugelassenen Nukleinsäuretests in klinischen Laboren. Es ermöglicht die automatisierte Extraktion und Reinigung von Nukleinsäuren aus verschiedenen Probenarten sowie die automatisierte Amplifikation und Detektion spezifischer Nukleinsäuresequenzen mittels fluoreszenzbasierter PCR. Das BD MAX System bietet: - Unabhängige Nukleinsäure-Extraktion und -Reinigung mit integriertem Extraktor - PCR-Amplifikation in 24 thermisch geregelten Kanälen - Echtzeit-Detektion der Amplifikationsprodukte - Identifikation jeder Probenpufferröhre über externen Barcode-Scanner - Verifizierung der Probenliste mittels internem Barcode-Scanner Podpexzgw Aefx Ah Hspl - Fluoreszenzdetektion bei bis zu fünf Wellenlängen zur Durchführung von Multiplex-Reaktionen (Ct-Auswertung oder Schmelzkurvenanalyse) - Qualitative, quantitative und schmelzpunktbasierte Probenanalysen Ausstattungsmerkmale: - Integrierte und vollautomatische Extraktions- und Thermocycling-Schritte - Verarbeitung und Analyse von bis zu 24 Proben pro Lauf - On-board Lyse und Extraktion mit vorgefüllten Reagenzstreifen - Echtzeit-PCR mit zwei 24-Kanal-Mikrofluidik-PCR-Readern - Hochleistungs-Multi-Farb-Optik: 475/520, 530/565, 585/630, 630/665, 680/715 nm - Konsistente Ergebnisse durch standardisierte Workflows und Protokolle - Schnelles und kontinuierlich wachsendes Testmenü sowie offene Systemoptionen zur Anpassung an neue diagnostische Anforderungen - Weniger als eine Minute Hands-on-Zeit pro Probe Elektrische Anforderungen: 100 bis 240 V, 50/60 Hz, 10 A, maximal 300 VA Abmessungen: Gewicht: 113 kg (250 lbs) Tiefe: 72,4 cm (28,5 Zoll) Höhe: 94 cm (37 Zoll) Breite: 75,4 cm (29,7 Zoll)