Centrifugos Valymas pirkti naudotą (2 421)

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20250107, bendras ilgis: 2 000 mm, bendras plotis: 1 900 mm, bendras aukštis: 3 050 mm, bendras svoris: 1 000 kg, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, įėjimo dažnis: 50 Hz, šildymo galia: 24 kW (32,63 AG), garantijos trukmė: 12 mėnesiai, didžiausias leistinas svoris: 700 kg, ruošinio svoris (maks.): 700 kg, narvo dydis: 1 390 mm, Single-stage cleaning machine Operating principle, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the automatic filling valve AR-2) and heated by means of heating elements and thermostat settings. The time settings for the phases washing, dripping (optionally drying and steam extraction) are set via the “PROCESS TIMER”. The parts are placed on the loading rack or loading trolley and pushed into the cleaning chamber. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport parts into the cleaning cabin. The lifting door is closed, the machine is started, and the wash pump delivers the cleaning fluid onto the items to be cleaned via the rotating spray systems. The rotation of the upper and lower spray pipes is activated by the reaction force of the reaction nozzle located at one end of the spray pipe. The rotational speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes equipped with nozzles. After the washing time has elapsed, a short dripping phase follows, during which the used cleaning fluid is returned to the wash tank via the filter baskets. Optionally, the cleaning fluid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). An additional stage such as pre-washing or rinsing is optionally possible via the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated), which is drained via the drain valve. Optionally, the parts can be dried after cleaning using a drying unit. Cpodpfxovvuzco Aahsw After the cleaning process, the lifting door is partially opened for steam extraction. The steam from the cleaning chamber is either extracted using the steam extractor (DF-250S) or condensed and returned to the tank via the steam condenser (FX6002). Both accessories are optional and not part of the standard machine equipment. After the steam extraction time has elapsed, the lifting door opens fully and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door if an object is detected in the doorway. The cleaned components can be removed from the cleaning cabinet onto a loading area or a loading trolley.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 32026, suslėgto oro jungtis: 9 juosta, bendras svoris: 60 kg, įėjimo įtampa: 230 V, garantijos trukmė: 12 mėnesiai, Sausų ledo valymo įrenginys GR II Naujas įrenginys Ledo talpa: 10 kg 3 mm granulės 5 metrų valymo žarna LED lempa ant pistoleto 7 mm apvali antgalis 25 mm plokščia antgalis Oro žarna 5 metrai Cpjdpfx Aoyh Hr Soahsw Techninės charakteristikos: 9 barai Maks. oro pralaidumas: 4200 l/min Oro reguliatorius: 1-9 bar Ledo reguliatorius: 0-70 kg ledo per valandą pralaidumas

Būklė: naudotas, Gamybos metai: 2013, 2013 | Renault Scarab Major 8001 | Sweeper | 240,047 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy now for EUR 29,500 or make an offer. Payment on delivery available for a reasonable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 34 inspection points: 32 approved ✅ 2 minor issues ℹ️ 0 critical defects ⚠️ 📌 Inspector's Comment: General condition satisfactory, some signs of wear consistent with the age and usage of the vehicle, no major faults to report. Codpfsypt Npjx Aahspw 📄 Want to see the full inspection report, additional photos, or a video? Tip: The reference "40326 Equippo" is commonly used for looking up more details online. 💡 Why this machine and our service stand out: ✔ Comprehensive inspection by professionals ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Looking for other equipment? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Būklė: naudotas, Gamybos metai: 2014, 2014 | Renault Scarab Major 7001 | Sweeper | 176,087 km 📍 Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 31,900 or Make an Offer. Payment on delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 33 inspection points, 31 approved ✅ 0 minor issues ℹ️ 0 defects ⚠️ 📌 Inspector's Comment: Overall condition satisfactory. Shows signs of use consistent with age and mileage. 📄 Want to see the full inspection report, extra photos, or a video? Tip: The reference "40325 Equippo" is commonly used when searching for more details online. 💡 Why choose this machine and our service: ✔ Comprehensive inspection by professionals ✔ Jobsite delivery available ✔ Money-back guarantee Cpsdpfx Ajyprtajahsw ✔ Secure and flexible payment options 🔄 Considering other equipment? We offer helpful tools and resources for all equipment owners and operators—easily accessible on our platform.

Būklė: naudotas, Gamybos metai: 1995, Overview This bottle washer was built in 1995 by the Swiss manufacturer PAC. The machine has been decommissioned and can be inspected in person at our warehouse. Technical Details Capacity: 6,000 bottles/hour Min/Max: 3,000 bottles/hour - 6,300 bottles/hour Bottle types: 0.5L, Euro, NRW, incl. change parts for 330ml Vichy bottle Bottles per row: 12 Bottles in machine: 1,080 Bottle carrier plates: 96 Dimensions: Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3.6 m³/h Heat consumption at 80°C: 480 kJ/h x 1000 Electrical consumption: 11 kW Including spare parts Motors for rear and front drive Bottle carrier plates Wear parts Machine frame completely made of stainless steel All hot zones with 5cm insulation Label discharge conveyor Stainless steel heat exchanger for low-pressure steam 116°C-120°C at 0.7 - 1 bar Self-cleaning spray pipes made of stainless steel Codpfxjvl Huao Aahspw

Būklė: naudotas, Gamybos metai: 2024, Overview The bottle cleaning machine was previously used in a brewery. Owing to its low operating hours, the machine is in excellent, as-new condition. It was replaced because the previous owner wanted to process bottle formats incompatible with this machine. All tanks and the machine body are made of stainless steel. The machine is already disassembled and stored dry, allowing for easy loading and transport. The machine comes with a 12-month warranty. Technical data: - Capacity: 9,500 bottles/h - Cell pitch: 95 mm - Bottles per row: 25 Dimensions & weights: Cpsdpfxevrfivs Aahow - Machine body: 7,162 x 2,740 x 2,500 mm / 18,806 kg - Ready-to-operate with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - Year of manufacture: 2024 - Formats: 0.25l, 0.33l, 0.5l, 0.75l Machine details / Features: - Heated by steam - Pre-rinsing and removal of residual liquid via pulsed rinsing before washing - CE-certified - Chemical dosing pumps - Machine data sheet included - Reinforced high-pressure pre-spraying - Rotating spray nozzles - Single-end machine (container infeed/discharge on the same side) - Plastic bottle cells - Concentration measurement - Liquid NaOH dosing - Stainless steel spindles - 24-volt control voltage - Siemens S7 control - Complete stainless steel machine body - Steam vent extraction - Machine dismantled, ready for shipment - Automated machine start-up (pre-heating, etc.)

Būklė: naudotas, Gamybos metai: 1994, Overview The centrifugal separator type SB80-06-076 from manufacturer GEA Westfalia was previously used in a brewery in Estonia. Due to the complete shutdown of the production facility, this unit is now for sale. Up until the closure of the factory, the separator was in frequent use. Technical data 4,500 revolutions per minute with self-cleaning bowl Accessories Spare parts Tools Cpedov N Hcxepfx Aahjw

Gamybos metai: 2014, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, BVL Surface Technology DAD 2BL (YUKON) Year of Manufacture: 2014 For Clean Components on a Continuous Conveyor Continuous-flow cleaning system made of stainless steel, equipped with an oil separator for ongoing material handling. The components pass continuously—or, if required, in cycles—through sequential treatment zones. Cleaning is carried out by passing the parts in front of fixed spray nozzle systems. Suitable for parts with approximate dimensions of 400 x 100 x 200 mm. A wire mesh belt conveyor transports the parts through the cleaning system, either lying flat or upright. • Surrounding nozzle frame – staggered nozzle arrangement allows all-around cleaning • Separation of treatment zones minimizes cross-contamination • Nozzles and nozzle frames are customizable for the part • Adaptation of usable dimensions, load capacities, and pump ratings possible Process steps take place in consecutive treatment zones: Cpjdpfx Aaexcun Eehow • Spray cleaning with series-arranged wet treatment zones (washing, degreasing, phosphating, rinsing, passivating) • Drying Tank volumes: Washing tank: 800 liters Rinsing tank: 500 liters Heating capacity: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Washing tank pump: 3.0 kW Rinsing tank pump: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine comes with stainless steel catch trays for spill protection. These are included in the price and supplied with the machine. WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Gamybos metai: 2010, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Trimmer 2A is a CNC corner cleaning machine for PVC frame profiles, featuring 2 interpolated axes and an automatic cycle. When properly configured, it is capable of verifying the dimensions of the workpiece. It is equipped with a 275 mm diameter blade that, using various machining programs, enables the cleaning of the external corners of different profiles. Trimmer 2A also has upper and lower units with knives for cleaning bead lines, and upper and lower units with knives for internal corner cleaning. Processing of both internal and external corners can be completed with upper and lower drilling/milling units for cleaning corners or gasket housing seats. The working units can be programmed independently via a CNC PC that manages profile programming and machine operation, either manually or automatically. Cpodpfjw Hk T Uex Aahow

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 760 mm, plotas našumas: 4 000 m²/val, garantijos trukmė: 24 mėnesiai, bakelio talpa: 120 l, bendras aukštis: 1 258 mm, bendras plotis: 834 mm, bendras ilgis: 1 458 mm, vandens talpos tūris: 130 l, darbinis greitis: 8 mm/s, We offer for sale a brand new IXSA X9 Ride-On Scrubber Dryer. Warranty coverage: - Machine: 24 months - Batteries: 60 months Technical specifications: • Working width: 760 mm • Productivity: 4,000 m²/h • Brush diameter (number): 380 mm (2) • Squeegee width: 1,020 mm • Waste water tank: 130 l • Solution tank: 120 l • Rated power: 2,100 W • Max. incline: 10 % • Vacuum motor output: 24 V / 550 W • Brush motor output: 24 V / 2x550 W • Maximum speed: 8 km/h • Brush pressure: 3.5 Mpa • Brush speed: 180 rpm • Pad width: 13 inches • Suction: 188 mbar • Noise level (EN 60704): 65 dB(A) • Dimensions (LxWxH): 1458 x 834 x 1258 mm • Weight (without battery): 248 kg • Lifepo4 batteries: 25.6V 200Ah, run time approx. 5 h • Lifepo4 batteries: 25.6V 300Ah, run time approx. 7 h • Batteries can be opportunity charged Standard equipment included with the scrubbers offered: • Neodymium disc brushes—magnetic mounting • Pad holder • LifePro batteries with extended cycle life and longer run time compared to standard gel batteries • Charger • Linatex suction bar blades Why choose IXSA? ✅ Durability – minimal electronics inside the machine increase long-term reliability Cedpfx Aasyaafljhepw ✅ 5-year warranty on lithium-ion batteries – unmatched in the industry, providing top-level durability and reliability ✅ Significantly higher charge/discharge cycles than gel batteries (5,000 vs. 700 cycles) and longer runtimes—IXSA batteries ensure more efficient operation and lower replacement costs over time ✅ Magnet-mounted brushes – simple installation and removal ✅ Long operating time per charge, with quick recharge capability ✅ Highest quality American-made LINATEX squeegee blades ✅ Twin suction system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – advanced technology for improved cleaning results and extended service life ✅ High surface performance – saves time and reduces labor costs ✅ Robust construction, low running costs – designed for heavy-duty, professional use ✅ Ergonomic and intuitive controls – user-friendly and easy to operate

Gamybos metai: 2014, būklė: geras (naudotas), Melag Melatherm 10 DT Washer-Disinfector The Melag MelaTherm 10 DT is a washer-disinfector (WD) specifically designed for the automated reprocessing of instruments in medical and dental fields. It incorporates essential functions such as active drying and integrated media storage directly within the unit to save space in your practice. Dimensions: The unit measures approximately 59.8 x 81.8 x 67.8 cm (W x H x D) and fits under a standard 60 cm worktop. Capacity: The optimized chamber accommodates instrument sets for up to 45 patients per cycle. Active Drying: Reliably protects instruments from corrosion and recontamination with integrated external and internal drying. Integrated Process Media: Detergent, neutralizer, and rinse aid are stored space-efficiently in a drawer directly in the unit. Manufacturer: Melag Model: Melatherm 10 DT Voltage: 230 V Year of manufacture: 2014 Financing through our partner bank is also possible. komplett-konzept.leasingo.de Cpedpfx Aajyk Eugjhsw More articles – new and used – can be found in our shop! International shipping costs on request!

Gamybos metai: 2023, veikimo valandos: 20 h, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 60 kg, įėjimo įtampa: 220 V, lazerio galia: 200 W, įvesties srovės tipas: Oro kondicionierius, pavaros tipas: elektrinis, Techniniai parametrai: Lazeris: impulsinis lazeris Lazerio galia: 200W Oro aušinimas Matmenys: 60 cm x 28 cm x 75 cm (ilgis x plotis x aukštis) – Idealu savarankiškam transportui! Pardavimo kaina įskaitant demonstraciją, apmokymus ir galimą papildomą priežiūrą - Galima pristatyti iš karto - Garantija Neparduodama prekybininkams, parduodama dėl naujos įrangos įsigijimo! NAUJA KAINA: 31 500,00 EUR be PVM Cjdpfx Ajxcf D Djahjpw DERINAMA KAINA: 15 000,00 EUR be PVM! Galimas finansavimas iki 6 metų laikotarpiui!

Būklė: naujas, Gamybos metai: 2026, bendras plotis: 680 mm, bendras ilgis: 780 mm, bendras aukštis: 670 mm, didžiausias leistinas svoris: 15 kg, bakelio talpa: 105 l, garantijos trukmė: 12 mėnesiai, vidinis aukštis: 400 mm, vidinis ilgis: 600 mm, vidinis plotis: 500 mm, Talpyklos matmenys: (IxPxA) 600 x 500 x 400 mm Išoriniai matmenys: (IxPxA) 780 x 680 x 670 mm 15 kg standartinė krepšio apkrova Cedpfxsx E S H Te Aahspw Talpyklos tūris: 105 litrų Ultragarsinė galia: 6 kW, dugniniai vibraciniai davikliai Šildymo galia: 6 kW, 30–70°C Įtampa: 400 V/50 Hz Nusausinimo vožtuvas, perpildymo vožtuvas, elektrinis šildymas Generatorius su „Booster“ funkcija, dažnis 40 kHz Lygio stebėjimas Komplekte dangtis ir krepšys

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 1 907 h, rida: 1 907 km, galia: 15 kW (20,39 AG), pirmoji registracija: 10/2017, bendras svoris: 1 900 kg, kuro tipas: dujos, spalva: raudona, ašių konfigūracija: 4x2, didžiausias leistinas svoris: 800 kg, tuščias svoris: 1 100 kg, stabdžiai: kitas, vairuotojo kabina: kitas, pavaros tipas: kitas, emisijos klasė: nėra, sėdimų vietų skaičius: 1, Įranga: kabina,

Būklė: naujas, Gamybos metai: 2023,

Gamybos metai: 2002, būklė: naudotas, Drum diameter: 682 mm Height: 539 mm Max. filling capacity: 167 kg Max. speed: 980 rpm Control cabinet not included; can be ordered directly from Steimel (approx. €8,500 – as of May 2021) Csdjfmqv Uspfx Aahopw Operating manual available

Gamybos metai: 2008, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Bio-Circle Parts Washer For active environmental protection Color: green/grey The ultimate cleaning wash table - the parts washer is in good used condition. Stainless steel perforated protective base The Bio-Circle wash table - parts washer, compact model, delivers cleaning fluid to the 3-way valve via an electrically driven pump. Depending on the position of the 3-way valve, the cleaning agent can be dispensed via: - The hose with wash brush, Cpsdpfxjfhdnbo Aahew - The work surface with an articulated hose (including storage tray), - Or both, directly onto the table. Operated with Bio-Circle L Liquid, the container in the parts washer biologically breaks down the contaminated cleaning solution (e.g. from cleaned off oil/grease) using microorganisms, as per the operating manual for Bio-Chem Surface Technology. The used parts and/or brushes to be cleaned benefit from an integrated heater, pump, aeration, and filter. The unit has been regularly serviced. The magnet in the drain sieve holds back steel particles. The parts washer system is fully functional and in good condition. Environmentally friendly cleaning for environmental protection. Dimensions of the parts washer unit: Parts washer H 1120 x W 900 x D 600 mm. Weight: 45 kg. A powered viewing is possible by prior appointment. Price/details upon request. All technical details are subject to errors or typographical mistakes. We sell exclusively to countries within the European Union.

Būklė: naudotas, veikimo valandos: 682 h, rida: 682 km, galia: 21 kW (28,55 AG), pirmoji registracija: 07/2018, bendras svoris: 1 750 kg, kuro tipas: dyzelinas, spalva: mėlyna, ašių konfigūracija: 4x4, didžiausias leistinas svoris: 870 kg, tuščias svoris: 880 kg, kita apžiūra (TÜV): 06/2026, ratų bazė: 1 300 mm, stabdžiai: kitas, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 1, Įranga: kabina, papildomi žibintai, suodžių filtras, vairo stiprintuvas, visų varančiųjų ratų pavara,

Būklė: naudotas, rida: 31 954 km, galia: 213 kW (289,60 AG), pirmoji registracija: 09/2021, bendras svoris: 16 000 kg, kuro tipas: dyzelinas, ašių konfigūracija: 2 ašys, kita apžiūra (TÜV): 12/2026, pavaros tipas: automatinis, emisijos klasė: Euro 6,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 1 820 mm, bendras plotis: 1 400 mm, bendras aukštis: 1 800 mm, bendras svoris: 950 kg, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, keliamoji galia: 100 kg, Įranga: dokumentacija / vadovas, Parduodama MAFAC Elba, kaip 2 vonių valymo įrenginys, pagamintas 2019 m., su apie 2500 valymo ciklų, labai geros būklės. (Pardavimas tik Austrijos teritorijoje) Įranga: - Rotacinis šilto oro impulsinis pūtimas - Stacionari karšto oro džiovinimo sistema - Pagrindinės srovės smulkaus filtravimo MT 1 - Pagrindinės srovės smulkaus filtravimo MT 2 - Krepšio sukimosi greičio reguliavimas - Valdymo spintos viršutinė lempa - Lyginimo komplektas - Laikmatis - Apsauginis tinklelis MW 20 Cpedpfx Aaswyc Sijhow - Cheminė dozavimo sistema proporcinga švariam vandeniui (2 vnt.) - Skirta Euro standartiniams krepšiams: 600 I x 400 P x 288 A mm

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2000, veikimo valandos: 1 240 h, Funkcionalumas: visiškai funkcionalus, pirmoji registracija: 07/2000, kuro tipas: elektrinis, Hako Jonas 1150EH Pilnai restauruota šlavimo mašina su nauju varomuoju ratu, 6 mėnesių garantija ir nauju DGUV V3 patikrinimu su protokolu. Darbinis plotis su šoniniu šepečiu: 105 cm Centrinė šlavimo šluotelė: 77 cm Maksimali našumo zona: 6 300 kv. m/val. Talpa: 110 l Pavaros tipas: akumuliatorinis Akumuliatorius V/Ah: (24V 240Ah) vonios tipo, šlapias Sumontuoti nauji komponentai / atlikti darbai: - visiškai naujas varomasis ratas su nauju važiavimo varikliu - visiškai restauruota/atnaujinta nusiurbimo/filtravimo sistema (iš cilindrinių filtrų modulių perstatyta į Hako Sweepmaster 980 dėžinį filtrą) - nauja šlavimo šluotelė - naujas šoninis šepetys - visos gumos juostos naujos - naujas dėžinis filtras Csdjyccr Hspfx Aahopw - visi tepalai nauji - naujas alyvos filtras - visų elektros variklių angliniai šepetėliai nauji Akumuliatorius naudotas, tačiau esant poreikiui, galime pakeisti nauju po papildomo aptarimo! Taip pat siūlome: Priežiūros, remonto ir prekybos paslaugas visiems populiariems Hako modeliams.

Gamybos metai: 2020, būklė: naujas, Tipas: LBM250C Varikliai: 2 x 0,75 kW Darbinis ilgis: 1300 mm Darbinis storis: 80 mm Transportavimo matmenys: 2400x600x1300 mm Cpsdpfx Aaofcg Epjhow Svoris: 340 kg

Gamybos metai: 2010, būklė: geras (naudotas), IWM SAN100 SP Sanitisationstunnel Cpodpovhcx Tofx Aahsw Baujahr 2010, aus Edelstahl, Durchlassmaß 600 mm x 600 mm, Bandabmessungen 1800 mm x 600 mm, mit Umlauftank, Filter, Füllstandssensor, 3-Phasen-Anschluss.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Hinst pratekančio tipo valymo įrenginys Gamintojo Hinst pratekančio tipo plovimo įrenginiai sukurti didelėms serijinėms dalims apdoroti, užtikrinant aukščiausius švaros reikalavimus. Įrenginio Nr. 04.333 Pagaminimo metai: 2004-12 Matmenys (PxGxA): apie 3,80 x 4,30 x 3,80 m Komplekte: - 6 krepšiai: krepšių matmenys 48,5x48,5xA26cm - Volelinis konvejeris 2,10x52x90 cm Pratekančio tipo plovimo įrenginys jau profesionaliai išmontuotas ir sandėliuojamas, vertė 3.500 € (įskaičiuota į kainą). Transportą galime suorganizuoti, pakrovimo tūris 2 vilkikai su puspriekabėmis. Pilnas gamyklos uždarymas. Didelis pasirinkimas sandėlio antresolių, padėklinių stelažų, lentyninių stelažų, paternosterių. Aukštos kokybės pramonės staklės, tekinimo staklės, šlifavimo staklės, rankiniai įrankiai. Cedeg Ipp Aepfx Aahspw Galimas finansavimas per mūsų banką. komplett-konzept.leasingo.de Daugiau prekių – naujų ir naudotų – rasite mūsų parduotuvėje! Tarptautinio pristatymo išlaidos – pagal užklausą!

Būklė: labai geros būklės (naudotas), Bous Waschfix 70/T3 WSA valymo ir riebalų šalinimo įrenginys BOUS valymo ir riebalų šalinimo įrenginys Waschfix 70/T3 WSA Speciali įranga: Smulkių dalelių filtras Išleidimo siurblys Cpjdpfxspudubo Aahsw Filtro stebėjimas Taip pat galima finansuoti per mūsų banką. komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio siuntimo kainos – pagal užklausą!