Barford Sxr 6000 pirkti naudotą (3 221)

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical specifications of the saw unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400/50 Hz. TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for bundle weight up to 80 kg Maximum push feed system speed: 90 m/min Pneumatic lift of pusher at the end of the cutting cycle and overhead return. Data input management: 12-inch TOUCH SCREEN controller (800x600 Pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycle (pattern) and enter directly at the controller Transfer cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of the stock length Partial optimization without measuring the panel length Ibedpfx Ajhw Ng Iocuoc Cutting cycle with 3 optimization options (maximum length, sequence, and board order) 1000 cutting lists with 11 sizes each, or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length measurement via photocell Cutting cycle: with 6 optimization criteria (longest length, sequence, board order, volume, minimal waste, and priority length) "OPTI PLUS" package: overall optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during timber mapping Marking with fluorescent chalks (Note Ð Only available in combination with ZA250) Pneumatic side clamping device

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 6 612 mm, Y ašies eiga: 5 645 mm, Z ašies eigos atstumas: 1 250 mm, stalo ilgis: 7 000 mm, stalo plotis: 2 500 mm, veleno greitis (maks.): 4 500 aps./min, atstumas tarp stulpų: 3 800 mm, Technical Data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm • Distance between columns: 3,800 mm • Distance table clamping surface – spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Speed in 2 stages, digital spindle drive: 60 – 4,500 rpm • Feed rate in CNC mode (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y and Z-axis each: 25,000 mm/min • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain iTNC 530 path control with 15" screen • Tool changer with 60 positions • Rotary table for operating multiple milling heads with automatic milling head change, including collet system for accommodating various milling heads, quick couplings for hydraulics, coolant and power supply, as well as the corresponding electrical safety switches • Centering of the milling heads on the rotary table via Hirth face gearing (on mounting plate and respective milling head) • 2 x milling heads: straight extension milling head (direct spindle), 45° milling head automatic • Crossbeam motorised traversable (for positioning only) • Operator platform: 2 operator platforms with safety enclosure and integrated control panel, traversing in X-direction, each with 2 doors • Chip conveyors on both sides of the table as well as a cross conveyor • Longitudinal drive X-axis and cross drive Y-axis by rack and pinion and 2 servo motors (electronically preloaded backlash-free, master-slave principle) Iedpfx Aoxgr Epjcusbc • Vertical adjustment Z-axis via ballscrew (Ø 80) and preloaded double nut • Zayer guideway system consisting of inserted or bolted, hardened steel strips • All axes equipped with INA roller recirculating shoes on each running surface • Counter guides for all axes additionally coated with plastic for optimum damping • Anchoring and leveling elements • The machine complies with the currently applicable EC directives The above information is taken from the machine documentation. The seller assumes no liability for the completeness or correctness. The actual technical specifications and functions of the machine are binding.

Sąlyga: paruoštas naudoti (naudotas), Vibrationsrinne Cyrus Marke: Cyrus Länge 6000 mm – Breite 1200 mm mit zwei Vibrationsmotoren à 7,5 kW Inkl.: Federn Ibjdpfx Aev Rty Hscuec

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 8 087 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 5 300 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 2 000 mm, veleno greitis (maks.): 5 000 aps./min, stalo aukštis: 925 mm, Mašina buvo pilnai patikrinta, atnaujintas frezavimo galvos ir X ašies teleskopinis gaubtas. Taip pat buvo pakeista valdymo panelė ir polikarbonato durys, mašina pilnai išvalyta. TECHNINIAI DUOMENYS Judėjimo ribos X ašis: 5 300 mm Y ašis: 1 500 mm Z ašis: 2 000 mm A ašis: +45° iki −225° B ašis: +165° iki −18° Špindelio duomenys Špindelio greičio diapazonas: 60–5 000 aps/min Įrankio tvirtinimas: SK 50 DIN 69871 Špindelio išorinis skersmuo (priekinis guolis): 140 mm Špindelio pralaidumas: 90 mm Stalo matmenys Iodjxbd A Nopfx Acuebc Tvirtinimo paviršius: 6 000 × 1 200 mm Stalo aukštis: 925 mm Darbinė pastūma: 10–6 000 mm/min Greitasis pastūma (X & Y): 15 000 mm/min Greitasis pastūma (Z): 10 000 mm/min MAŠINOS DUOMENYS Valdymas Valdymo gamintojas: HEIDENHAIN Valdymo modelis: TNC 530 Darbo valandos Špindelio valandos: 8 087 h Valdymo įjungimo valandos: 3 785 h Mašinos įjungimo valandos: 30 238 h Pastaba: Mašina jau išmontuota.

Sąlyga: naudotas, Gamybos metai: 2005, mašinos/transporto priemonės numeris: A0407004, - Manufacturer: Venjakob - Model: VEN SPRAY DUO/C CNC 6000 - Year of manufacture: 2005 - Working width: 1300 mm - Operator side: right - Price for refurbished machine - Current condition: machine not refurbished - Gun drive in DUO design - Dry extraction system - Extraction nozzle diameter: 500 mm - Exhaust capacity: 10,000 m³/h - Belt conveyor system - Feed speed steplessly adjustable ~ 2 - 7.5 m/min - With belt cleaning system Isdpfxsumvu Uo Acuebc - With paint recovery via V-belt system - Gun control, CNC touch screen - Installed colour circuits: 1 pc. - Quick-change system for spray apparatus - Supply air filter ceiling - Suitable for water-based coatings - Suitable for solvent-based coatings - Control cabinet integrated in machine - Total connected load: ~29 kW - Voltage, Hz: 400 / 50 - Colour: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5 % The image shows an example of a refurbished automatic spray machine. _____ Optionally, we can also provide you with an offer for assembly and commissioning of the system, as well as training of your staff. Upon request, we also offer regular maintenance and servicing of the machine. For further information, simply contact us!

Sąlyga: naujas, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of holders: 7 Isdjfv Atlspfx Acuebc Material: stainless steel tube Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m The length measuring system is available as a retrofit for existing roller conveyors, in lengths from 2 to 6 meters. The guide rail is made of rectangular tube 60 x 30 x 3 mm. The steel measuring tape is self-adhesive. The magnifier with 6x magnification facilitates precise adjustment to the desired length. Attention: This listing is only for the stop system, without roller conveyor!

Sąlyga: geras (naudotas), rida: 809 080 km, galia: 330 kW (448,67 AG), pirmoji registracija: 10/2015, kuro tipas: dyzelinas, spalva: balta, ašių konfigūracija: 6x2, kuras: dyzelinas, stabdžiai: retarderis, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, Gamybos metai: 2015, Įranga: autonominis šildytuvas, kruizo kontrolė, oro kondicionavimas, retarderis, spoileris, suodžių filtras,

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, darbo diapazonas: 6 500 mm, įvesties srovės tipas: trifazis, bendras plotis: 1 629 mm, bendras aukštis: 2 525 mm, bendras ilgis: 10 500 mm, stalo ilgis: 6 500 mm, bendras svoris: 3 500 kg, Vamzdžio skersmuo (maks.): 220 mm, galia: 15 kW (20,39 AG), lazerio galia: 6 000 W, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, aušinimo blokas, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format The skytube-pro-6500×3 profile and tube laser, a fiber laser metal cutting system optimized for fast material changes with up to 6kW of power, offers a smart and efficient tube laser processing solution for your production needs. It is ideal for laser cutting round tubes, square tubes, rectangular tubes, open sections, and special profiles—a laser machine designed for maximum productivity during production changeovers. The requirement: fiber laser up to 6kW for various metal processing tasks! Unmatched Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, enable excellent cutting performance and accuracy. The tube and profile laser processing machine is compact for production environments—simply clever! Ingenious solutions, 100% from Saxony! Tubes and profiles from 15 x 15 up to 160 x 160 mm, 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile tube chain loading system enables rapid job changes. With the optional bundle loader, you can operate independently. Ibedpforh Iw Tsx Acuoc Bevel Cutting A feature that changes everything. Thanks to our machines’ capability to swivel the cutting head by up to 50° on an additional fifth axis, one of the major challenges in modern profile processing has been overcome. If the laser beam always hits the workpiece perpendicular, it results in an elliptical cut edge. With the ability to tilt the tube laser cutting head, a perfectly angled cut can now be achieved together with the feed axis. Naturally, you are always on the safe side with the skyTUBE laser! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser radiation or reflections during operation. For all our laser systems, complete safety and compliance with the highest standards and regulations are our top priority. Technical Specifications: · Enclosed industrial housing, Class 1 laser (or Class 4 upon request) · Working area for tube cutting / clamping system: round tubes 15–160 mm, rectangular tubes 15 x 15–110 mm · Working area on tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed for up to 6 x 160 mm profiles, 3500–7000 mm in length · Automatic unloading system for profiles, custom-designed by profile length · Z drive system: Ball screw axis / with PTI SVZ system · X/Y drive system: Linear axis / with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min (1.4G), depending on material and laser configuration · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Maximum footprint (WxDxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system, depending on profile cut length

Sąlyga: geras (naudotas), Gamybos metai: 2012, Offer consisting of: Wohlenberg City E 6000 (2012) Wohlenberg Sprinter E (2012) Ibedpowv T N Rjfx Acujc Wohlenberg TrimTec75i (2000)

Gamybos metai: 2005, Sąlyga: naudotas, Ritinėlio ilgas: 6000 mm Iodpfx Ajxbnxnjcujbc Ritinėlio plotis: 300 mm Sustabdymo sklendė su skale: Taip

Gamybos metai: 1997, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 4353, Technical data: - Manufacturer: Elmag Superfici - Length: 6,000 mm - Belt width: 1,300 mm - Total width: 1,540 mm Iodpfx Asv Tc T Ujcuebc - Year of manufacture: 1997 - Feed adjustable via handwheel - Feed speed approx. 2–7.5 m/min - Frequency converter required on site - Location: in stock - Voltage, Hz: 400 / 50 - Motor power: 0.75 kW

Sąlyga: naujas, Roller conveyor length: 6,000 mm Maximum material weight: 300 kg/m Roller width: 350 mm Roller diameter: 60 mm Adjustable working height: 840 - 950 mm Weight: 160 kg Total width: 620 mm Total length: 6,000 mm Roller conveyors without end stop system. Robust design. Available in lengths from 2 to 6 meters. Ibodpfx Aof Nb Eiscuoc

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2013, veikimo valandos: 7 202 h, keliamoji galia: 4 000 kg, kėlimo aukštis: 6 000 mm, apkrovos centras: 600 mm, kuro tipas: dujos, stiebo tipas: dupleksas, statybinis aukštis: 3 800 mm, variklių gamintojas: GM 3.0, šakių ilgis: 1 200 mm, bendras svoris: 6 100 kg, tuščias svoris: 4 000 kg, bendras aukštis: 3 800 mm, bendras ilgis: 2 300 mm, bendras plotis: 2 200 mm, didžiausias leistinas svoris: 4 000 kg, kuras: suskystintos naftos dujos (LPG), Įranga: apšvietimas, kabina, padėklų šakės, reguliuojamas strėlė, šoninis poslinkis, Labai geros būklės Combilift. Ijdpfx Acjw Tln Ejusbc Duplex stiebas 6000 mm su laisvu kėlimu Šoninis stumdymas Parduodame šakinius krautuvus po pilno techninio aptarnavimo. Paruošti galutiniam vartotojui. Paruošti naudojimui. Galime suorganizuoti transportą Europoje ir visame pasaulyje.

Sąlyga: naujas, Heidenhain ROD 260 6000 01-03 kampo matavimo prietaisas, prekės nr. 331 881-35, SN:10330464, nenaudotas, su sandėliavimo žymėmis, 100% veikiantis, komplektacija pagal nuotraukas. Ibodpfxei Eavzs Acuoc

Gamybos metai: 2008, Sąlyga: paruoštas naudoti (naudotas), Presavimo jėga: 220 kN, darbo sritis kombinuotame režime X/Y: 2585 mm/1650 mm, darbo sritis presavimo režime: 3085 mm/1740 mm, darbo sritis lazerio režime X/Y: 3085 mm/1650 mm, didžiausias lakšto storis statybinis plienas/nerūdijantis plienas/aliuminis: 8 mm/6 mm/4 mm, didžiausias ruošinio svoris: 230 kg. Pozicionavimo greitis: 109 m/min, didžiausias taktų skaičius: 900 taktų/min, didžiausias ženklinimo našumas: 2800 taktų/min, įrankių vietos: 18, tikslumas: +/-0,1 mm. Staklių matmenys X/Y/Z: apie 8000 mm/9000 mm/2500 mm, svoris: apie 22 500 kg. Dokumentacija yra. Galimas apžiūrėjimas vietoje. Tikėtina, kad bus prieinama nuo 2025 m. lapkričio. Ijdpfexddagox Acuebc

Sąlyga: naudotas, Tuščiasis svoris: 20 000 kg Dalys tinkamos: lengviesiems automobiliams Mercedes Ibedpfx Asxiql Hscujc + 100 variklių ir pavarų dėžių + 260 durų + 80 salonų + 600 variklio dalių + 550 valdymo blokų (ECU) + 60 prietaisų skydelių + 200 ABS siurblių + 100 hidraulinių siurblių + 40 turbokompresorių + 150 starterių + 125 aukšto slėgio siurblių + 200 langų + 80 diferencialų + 200 amortizatorių + 100 pavaros velenų + 7 kieti stogai + 155 prietaisų panelės + 150 radijo imtuvų + 100 radiatoriai + 400 pakabos svirčių + daugybė kitų dalių Straipsnio nr.: T090004049-veiling Naudotos Mercedes lengvųjų automobilių dalys + 6 000 vienetų!!!!

Sąlyga: naudotas, rida: 92 000 km, galia: 132 kW (179,47 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, bendras svoris: 7 200 kg, pirmoji registracija: 07/2017, krovimo vietos ilgis: 6 000 mm, krovinių skyriaus plotis: 2 350 mm, emisijos klasė: Euro 6, spalva: žalia, sėdimų vietų skaičius: 3, bendras ilgis: 8 613 mm, bendras plotis: 2 300 mm, bendras aukštis: 2 400 mm, Įranga: centrinis užraktas, oro kondicionavimas, suodžių filtras,

Sąlyga: naujas, Stop length 6000 mm Maximum material weight 300 kg/m Roller width 350 mm Roller diameter 60 mm Ibodpfxjvkivws Acuec Adjustable working height 840 - 950 mm Weight 195 kg Total width 620 mm Total length 6400 mm Roller conveyors incl. stop system. Robust design. Available in lengths from 2 to 6 meters.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, lazerio galia: 6 000 W, The laser machine is connected to power and can be inspected and tested at any time. TruLaser 5060 (L10) 6000 Watt X working area max.: 6000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control unit: Siemens Sinumerik 840 SL Laser power: 6000 Watt Operating hours (power on): 41,398 hrs Laser on hours: 19,288 hrs Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 25 mm Max. sheet thickness (aluminum): 15 mm Base machine - TruLaser 5060 (L54) (6000 mm x 2000 mm) Standard equipment - Machine - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive combined with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Chiller unit - Automatic pallet changer (longitudinal direction) - 17" color touch screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF laser - CO2 laser TruFlow 6000 Energy-efficient / New generation - Maintenance-free turbo radial blower - High-frequency excitation - Laser control TASC - Laser power regulation - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition monitoring - ControlLine: Height control and sheet edge detection Control system - SINUMERIK 840D SL control - Simple workshop programming - TruTops Laser via network access - Fast re-manufacturing - Integrated TRUMPF technology data - Automatic shut-off - ContourLine - FastLine - FlyLine - Microweld - AdjustLine - Remote service via internet - Data transmission - USB interface - RJ-45 network port - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction unit - Machine enclosure with Makrolon panels + Nozzle changer including nozzle centering + High-speed cutting head 175 mm + BrightLine + CoolLine + Platform mounting without steel structure Ijdpfx Aewwukrscuobc

Sąlyga: naujas, GMN TSE 110 - 6000 / 1.75 aukštų apsisukimų velenas, serijos nr.: R346575, nenaudotas, atidarytoje originalioje pakuotėje, 100 % veikiantis, komplektacija pagal nuotraukas. Ibsdpfx Asi Eaaijcuoc

Sąlyga: naujas, Gamybos metai: 2025, Volumetric dosing unit for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: Dosing range: 500–6000 ml; Hopper capacity: 120 L; Number of dosing cups: We select a suitable cup version (single or multi-head) based on your product and the desired filling volumes. Please note that our new prices are often below common used equipment prices. Please feel free to inquire and let us know your packaging requirements. - Typically, 30–50 different new machines are immediately available from stock. Furthermore, for machines manufactured to customer specifications, we offer very short lead times starting at approx. 3 weeks. - All machines are available with full warranty. Iodpfxev Nnl Ie Acuobc

Sąlyga: naujas, GMN TSE 95 - 6000 / 1,1 šlifavimo špindelis SN:339464, nenaudotas atidarytoje originalioje pakuotėje, 100 % veikiantis, komplektacija pagal nuotraukas. Ijdpfx Acji Eabveuobc

Sąlyga: naujas, GMN TSE 100cg-6000 / 1.25 didelio greičio velenas SN:R358699, nenaudotas, 100% veikiantis, pristatymo apimtis pagal nuotraukas Iedpfx Aji D U U Tscujbc

Sąlyga: naujas, GMN TSE 100cg-6000 / 125 didelės spartos velenas SN:R358399, nenaudotas, atidarytoje originalioje pakuotėje, pilnai veikiantis, komplektacija pagal nuotraukas Ibodpfxoi Eaabj Acujc

Sąlyga: naujas, GMN TSE 110-6000 / 1.75 didelės spartos velenas, serijos nr.: R346576, nenaudotas, atidarytoje originalioje pakuotėje, 100% veikiantis, komplektacija pagal nuotraukas. Ibedpfxei Eaafs Acujc