Baras Lentyna pirkti naudotą (10 497)

Būklė: geras (naudotas), Srautinė sandėliavimo lentyna Karton Flow Profesionali ritinėlių sistema: INTERROLL Komplekte penkios ritinėlių lentynos, kiekvienos matmenys: 200 x 130 cm Galimybė konfigūruoti skirtingam kartoninių dėžių pločiui. Bendri lentynos matmenys: 230 x 135 cm, aukštis 285 cm Galima apie 100 vnt. lentynų Siūlome ir kitų matmenų lentynas. Djdpfx Acoiuidis Dsur Techninė būklė: naudota, gera techninė būklė.

Būklė: naudotas, Aukšto slėgio hidraulinė pavara iki 630 barų WEBER tipas E45 / 59600.0 Aukšto slėgio agregatas + hidraulinės skėtimo žnyplės, hidraulinis skėstuvas Pagaminimo metai: 1988 / 1986 Hidraulinė pavara tipas E45 / 59600.0 Darbinis slėgis maks. 630 barų Našumas apie 2 l/min Bako talpa apie 10 litrų Skėstuvas - žnyplės WEBER tipas SP30 / 59198.0 Išsikišimo ilgis = svirties ilgis: 340 mm Dodedzp S Rspfx Ac Deur Skėtimo eiga maks. 610 mm Skėtimo jėga darbinėje srityje maks. 132 kN Uždarymo jėga 99 kN - Dviguba žarna su greita jungtimi Nominali galia 0,9 kW Maitinimo jungtis 220 voltų, 50 Hz Hidraulinės pavaros svoris apie 40 kg Skėstuvo svoris apie 25 kg Labai geros būklės Hidraulinė ugniagesių gelbėjimo įranga su hidrauline pavara ir vienu skėtuvu. Skėstuvas naudojamas gelbėjimo angų sudarymui po eismo įvykių išplečiant konstrukcijas. Taip pat gali būti naudojamas presuojant arba keliant krovinius. Universalus naudojimas dėl daugiatikslės, iš kalto ir grūdinto plieno pagamintos skėstuvo žandikaulių konstrukcijos.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Djdpfx Acoh R Taqe Dour Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation Duodomhhypspfx Ac Dsr - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Dsdpfsmhh Dhsx Ac Dsur - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) Djdpfx Acsfdkb Te Djur - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. Dusdpfemhh Dzsx Ac Dor The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level. Dodpsmhh Ansfx Ac Dour

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) Dsdpeguk A Hsfx Ac Dsur - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. Dodoguk Dkspfx Ac Djur The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. Dujdpemhhy Nsfx Ac Dor The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Dujdpfx Acomhh Dts Dor - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) Djdpfxsguk Dvj Ac Djur - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: geras (naudotas), Kiekvienos lentynos stiklo padėtis: 65 mm Maksimalus stiklo aukštis: 1680 mm Plotis: 1500 mm Gylis: 2600 mm Dusdpjyx Uf Ssfx Ac Dsr Aukštis: 2060 mm Būklė: Geras, naudotas

Būklė: geras (naudotas), Rėmai: 8860x1050x80 mm – 34 vnt. 3000x1050 mm – 7 vnt. Sijos: 1860x75x45 mm (2800 kg/lentynai) – 352 vnt. 2760x115x40 mm (2400 kg/lentynai) – 26 vnt. 2700x100x50 mm (2400 kg/lentynai) – 22 vnt. Galima įsigyti ir dalinius kiekius. Jei jums reikia lentynų ar priedų kitokių komplektacijų ar variantų, susisiekite su mumis. Siūlome platų naujų ir naudotų lentynų bei priedų asortimentą ir mielai padėsime Jūsų planavime. Individualus, Jūsų poreikiams pritaikytas pasiūlymas mums yra savaime suprantamas dalykas. Duedpfx Aod Hbqnec Der Siuntimas: Prašome teirautis dėl siuntimo kainos, nurodydami savo pašto kodą, miestą bei pageidaujamą prekių kiekį.

Būklė: geras (naudotas), Gamybos metai: 2020, Hidraulinis agregatas, hidraulinė pompa, hidraulinė siurblinė, universalus agregatas, hidraulinė stotis, - Hidraulinis agregatas: su hidrauliniu baku ir valdymo bloku Dsdeywgxbopfx Ac Djur - Hidraulinė pompa: slėgis iki 100 bar - Našumas: 6 l/min - Variklis: 3 kW / 1410 aps./min - Hidraulinis bakas/filtras/vožtuvai: žr. nuotraukas - Mygtukinis jungiklis: CNC Electric COB-62C - Matmenys: 470/450/H685 mm - Svoris: 84 kg

Būklė: geras (naudotas), Hydraulic power unit, hydraulic pump, universal power pack, hydraulic station, hydraulic torque pump, torque wrench pump - Manufacturer: HAWE, hydraulic power unit - Model: MP 24-H 1.77/B 5-A 1/300- - Motor: 0.55 kW / 1390 rpm / 380 V Duedpeivqm Eofx Ac Der - Pressure: up to 310 bar - Flow rate: 1.73 l/min - Individual components: see photos - Dimensions: 325/160/H295 mm - Weight: 19 kg

Būklė: naudotas, Hidraulinis agregatas, Hidraulinio tiekimo blokas, Rexroth ABHAG-4503-0-C, naudota įranga Dusdpjyuzinefx Ac Dor Gamintojas: Rexroth Modelis: ABHAG-4503-0-C Siurblys: Rexroth A10VSO Tipas: ašinė stūmoklinė siurblys Su slėgio-srauto reguliatoriumi, maksimali darbo slėgis: 280 bar Matmenys: 900 × 900 × 1350 mm Talpos tūris: 160 litrų Svoris: 400 kg Pagaminimo metai: 2016 Elektros duomenys: 400 V; 5,5 kW; 10,5 A

Būklė: naudotas, Hidraulinis rinkinys, hidraulinė stotis, Rexroth RRG, Rexroth 4WE10, Naudota įranga Dodpfjyuzihex Ac Djur Gamintojas: Rexroth Modelis: RRG Matmenys: 1050 × 560 × 1400 mm Bako talpa: 160 dm³ Svoris: 325 kg Pagaminimo metai: 2011 Elektriniai duomenys: 400 V Vožtuvas: Bosch Rexroth 4WE10 Galimybė keisti kryptį ir sustabdyti bet kurioje pageidaujamoje padėtyje Srauto greitis: 100–120 l/min Kontrolės įtampa: 24 V Maksimalus slėgis: 315 bar

Būklė: naujas, Gamybos metai: 2020, Cantilever Racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Centre distance: 131 cm - NEW - immediately available from stock. - 750 kg load per arm - 2250 kg load per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments Djdpfxeyzq Hqo Ac Djur - Levels: Base + 3 storage levels (4 storage levels in total) Rack consists of: - 04 x uprights, incl. base approx. 300 cm made from IPE160 - 12 x cantilever arms approx. 120 cm made from IPE 100 - Incl. all necessary connecting elements and bolts Why choose BLT Cantilever Racking? - Certified German manufacturer in accordance with DIN EN 1090 - Made in Germany - All specified load capacities of uprights and arms are statically verifiable at 100% capacity - All racks supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use without rusting unlike painted racks. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long-term post-purchase guarantee - The upright base and upright rear are welded together, providing added safety and fast installation since the feet do not need to be bolted to the rear - Bracing made from angle steel, so no adjustment via turnbuckles is necessary. This reduces installation time. - No slotted hole system, preventing weakening of the upright profile Price: €2,404.00 net + applicable VAT. You will receive an invoice with VAT shown. Accessories such as floor anchors, collision protection, etc. are also available from us. Transport: Delivery available through our partner shipping company on request; cost depends on postcode. Assembly: Our trained staff are happy to professionally assemble and dismantle your equipment if required. Our recommendation: Tell us your requirements ... We are happy to assist you with your project, from planning and ordering to installation.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, keliamoji galia vienai konsolės svirčiai: 140 kg, lentynos aukštis: 2 500 mm, bendras ilgis: 3 150 mm, bendras aukštis: 2 500 mm, ašių atstumas: 1 030 mm, apkrova vienai atramai: 1 120 kg, Approx. 3.15 linear meters Cantilever Racking with Shelves 60cm Deep H: 250 cm 140 kg/arm META Multistrong Dodpfx Aoyzq Hdsc Dour Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axle dimension: 103 cm - NEW – immediately available from stock. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights painted in RAL5010 (gentian blue). - Cantilever arms painted in RAL5010 (gentian blue). - Arms are hooked in and secured with locking pins. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels total) Rack consists of: - 04 x Uprights, incl. base approx. 250 cm from IPE120 - 16 x Cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm - 12 x META shelves, approx. 100 x 60 cm - Including all necessary connectors and bolts -- Immediately available -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc. are also available from us. Transport: Delivery can be arranged on request by our partner shipping company, with costs depending on postcode. Assembly: Our trained staff will gladly assist you with professional assembly and disassembly of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to assist you from planning through ordering to installation to help realize your projects.

Būklė: naujas, Cantilever Rack New H: 400cm, Base + 3 storage levels with roof & back wall Delivery free to anywhere in Germany, except islands. Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1420 cm - Cantilever arms: approx. 125 cm - Axle spacing: 290 cm (customizable upon request) - New product – made in Germany - Delivery time: approx. 6 weeks after commercial clarification - Load capacity per arm: 1000 kg - Load capacity per upright: 4000 kg - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Adjustable arms in 200 mm increments Dedpfoyzq Eysx Ac Dsur - Levels: base + 3 storage levels (4 storage levels in total) The rack consists of: - 6 x uprights incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 6 x roof beams, approx. 150 cm, made from IPE120, with 5° rising roof pitch - Incl. roof and back wall material - Incl. all necessary connecting elements and bolts Why choose BLT cantilever racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities for the uprights and cantilever arms are statically certified at 100% load - All racking systems are delivered in a hot-dip galvanized finish. This means they can be installed indoors or outdoors and will not rust like painted systems. Consistent appearance for many years - We use the legally required hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term spare parts guarantee - Upright base and rear are welded together, providing added safety and reduced assembly time, as the bases do not need to be bolted to the rear upright - Bracing made of angle steel, eliminating the need for turnbuckles. This reduces assembly time - No slotted hole system, thus no weakening of the upright profile Price: €12,250.00 net Plus statutory VAT. You will receive an invoice with indicated VAT. Assembly: Our trained staff are happy to provide professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you with the realization of your projects, from planning and ordering to assembly.

Būklė: naujas, Gamybos metai: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW STOCK, immediately available from stock. Dsdpfxjyzq Etj Ac Dour - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (total 4 storage levels) Rack includes: - 4 x uprights incl. base, approx. 350 cm made from IPE160 - 12 x cantilever arms, approx. 120 cm made from IPE 80 - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All stated load capacities for uprights and cantilever arms are statically proven at 100% load. - All rack systems are supplied hot-dip galvanized, suitable for both indoor and outdoor use, and do not rust like painted systems – ensuring consistent appearance for many years. - We use the legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long purchase guarantee - Upright base and upright rear are welded together for additional safety and reduced assembly times, as the bases do not need to be bolted separately to the uprights. - Bracing made of angle steel, so no adjustment using turnbuckles is necessary, which reduces assembly time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,356.00 net + legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery is available upon request via our partner freight forwarder, costs are dependent on postal code. Assembly: Our trained personnel are happy to assist you with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects – from planning to ordering to installation.

Būklė: naujas, Cantilever Rack Double-Sided New Specifications: - Height: approx. 400 cm - Width: approx. 256 cm - Length: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle distance: approx. 131 cm - New item from factory - Double-sided - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 4 storage levels (5 storage levels in total) - Delivery time approx. 4 weeks Rack consists of: - 15 x double-sided uprights incl. base, approx. 400 cm made from IPE 160 steel - 120 x cantilever arms approx. 120 cm made from IPE 80 steel, without stop end - Incl. all necessary connectors and bolts Why Choose BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the rack uprights and arms are statically verified at 100% loading. - All racking systems supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use, will not rust like painted systems. Consistent appearance for many years. - We use legally compliant hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term spare parts availability guarantee - Upright base and rear are welded together for additional safety and shorter assembly times – no need to bolt the feet to the upright backs. - Bracing made from angle steel, so no adjustment by turnbuckles necessary, reducing assembly time. - No slotted hole system, so no weakening of the upright profile. Price: €12,450.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery by our partner forwarding agent on request. Costs depend on postal code. Assembly: Duedpfx Aceyzq Ems Dsr Our trained personnel are available to professionally assemble and dismantle your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering through to assembly.

Būklė: naujas, Cantilever racking systems made to measure! Ideal for storing long goods. Easy access to your products thanks to configurations that can be used on one or both sides. Expandable system, allowing you to add components as your needs develop. Perfect for offcuts or long materials in metalworking and woodworking operations. Dusdpjyzq Egefx Ac Djr Why choose BLT Cantilever Racks? • Certified German manufacturer according to DIN EN 1090 – Made in Germany • All stated load capacities for uprights and arms are statically verified at 100% load! • All rack systems are supplied in hot-dip galvanized finish, allowing for indoor and outdoor use without risk of corrosion as with painted racks. Consistent appearance for many years. • We use legally required hot-dip galvanized bolt sets pursuant to DIN EN 15048-1 • We use legally required load signs type C4 according to DIN EN 15635 / BGR 234 • Long-term spare parts availability guaranteed • Upright base and upright spine are welded together for added safety and reduced assembly times, as the base does not need to be bolted to the spine. • Bracing made from angle steel – no tension rods needed, shortening installation times. • No slotted hole system – no weakening of the upright profile. Transport: Delivery is available via our partner freight forwarder; costs depend on postcode. Assembly: Our trained staff are available on request to professionally assemble and disassemble your warehouse equipment. Our recommendation: Let us know your requirements… We are happy to support your project from planning and ordering through to installation. Interested or have questions? Simply contact us by message or phone. Our telephone number is listed on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.