Autómata pirkti naudotą (3 518)

Būklė: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx.: 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automatic Machines of the SBS Series The SBS series convinces with its advanced technology, high quality, durability, and an unrivalled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tension Gedpfofb Nbfjx Ac Djbk • Clamping pressure regulation • Double vise (in front of and behind the blade) • Creep speed for positioning • Bundle clamping, prepared for electrical and hydraulic operation • Chip conveyor The SNC 20 control system allows convenient and intuitive input of up to 20 different sawing jobs (length and quantity). When entering the target dimension, the control automatically calculates the kerf and the number of feed movements. Additionally, the fault code display system provides fast analysis for error correction.

Būklė: naujas, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400x330 mm Saw blade length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-column high-performance bandsaw machines from the SBS series The SBS series impresses with advanced technology, high quality, long service life, and exceptionally comprehensive standard equipment. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the blade) Gbodpfx Asfb Nbgjc Dek • Creep mode for positioning • Bundle clamping prepared for electric and hydraulic operation • Chip conveyor The SNC 20 control allows convenient and straightforward entry of up to 20 different sawing tasks (length and quantity). When entering the desired dimension, the control automatically calculates the cutting allowance and the number of feed cycles. In addition, the error code display system enables quick diagnosis for troubleshooting.

Būklė: naujas, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw band dimensions: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL OFFER PRICE!!!! 2-column high-performance bandsaw machines from the SBS series The SBS series stands out through advanced technology, premium quality, durability, and an unparalleled comprehensive standard configuration. • Modern SNC 20 control system in CNC version • Frequency-controlled saw drive Gjdpefg E Hvefx Ac Dobk • Control buttons with pictograms • Work light included • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the saw blade) • Inch mode for positioning • Electrical and hydraulic bundle clamping provision • Chip conveyor The SNC 20 control system allows easy and straightforward input of up to 20 different sawing tasks (length and quantity). When the desired length is entered, the control system automatically calculates cutting allowance and the number of feed cycles. The error code display system also allows for quick fault analysis and troubleshooting.

Būklė: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height probe (automatic cut start detection) Godpfofu Nbbsx Ac Dobk Automatic feed unit via ball screw spindle, incremental feed with automatic length compensation Probe on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed clamping vice opening on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cut lengths and quantities. Automatic feed unit 500 mm via ball screw spindle, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. Fully hydraulic control of the saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 - 100 m/min Gbodpfx Asfgyifec Djk Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for rapid cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially designed for cutting profiles and beams, as well as solid material. The material is clamped vertically on the feed and discharge sides. Starting from the K-tech 800H, the machine comes standard with an additional horizontal clamping vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines are equipped as standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC control allows the programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening grippers” which are hydraulically operated. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal shape. The pusher system is mounted separately and is guided via ball-bearing linear guides, precision-ground rack, and a robust, frequency-controlled geared motor.

Būklė: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 1250 x 600 mm Saw blade length: 8140 x 54 x 1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space required: approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for rapid cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams, as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. From K-tech 800 H onward, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming up to 90 cutting programs with various cut lengths, quantities, and mitre angles. Gjdpjfgyigjfx Ac Djbk The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening gripper jaws” that are hydraulically controlled. This ensures safe gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is designed as a separate unit and guided by precision linear ball guides, a ground rack, and a frequency-driven, robust gear motor.

Būklė: naujas, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Blade speed: 18 – 110 m/min Gbodpfxjd Iipze Ac Dek Control system: CNC Total connected load: 1.5/1.8 kW Machine weight approx.: 0.63 t Space requirement approx.: 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45°: fully automatic operation • Mitre left 60°: semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: very quiet, low vibration cutting • Removable chip tray (cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Top access to saw, material, and feed unit • Folding safety cover • Fine adjustment of feed rate • Semi-automatic cut! • Optimize workflows with CNC control Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with multiple cut lengths • Automatic feed unit (CNC) via ball screw spindle with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, residual piece length 170 mm.

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Cutting capacity at 45 degrees: round 550 mm Cutting capacity at 45 degrees: square 550 mm Cutting capacity at 45 degrees: flat 550 x 600 mm Cutting capacity at 60 degrees: round 370 mm Cutting capacity at 60 degrees: square 370 mm Cutting capacity at 60 degrees: flat 370 x 600 / 450 mm Saw blade length: 7260 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column double mitre bandsaw for fast cutting, equipped with pusher system P15. Option: P30. Hydraulic saw frame lowering: • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system." An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. The worktable runs on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control: A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. Double-sided gripping positioning system: The B&S pusher, feed, and positioning system is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is built as a separate unit and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust gear motor. Gbedpfx Asfg E Hmjc Dek

Būklė: naujas, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangular 1250 x 600 mm Cutting range at 45°: round 680 mm Cutting range at 45°: square 600 mm Cutting range at 45°: flat 870 x 600 mm Cutting range at 60°: round 580/550 mm Cutting range at 60°: square 530/450 mm Cutting range at 60°: flat 550 x 450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 – 90 m/min Table height: 855 mm Godpefg E Hnofx Ac Djbk Total power requirement: 7.5 kW Machine weight: approx. 5.3 t Space requirement: approx. 5.75 x 4.2 x 2.75 m 2-column double miter band saw for fast cutting, equipped with Pusher System P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved with the new “B&S Positioning System.” An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake using large-radial center positioning. The work table is mounted on high-quality, preloaded bearings, ensuring very easy rotation. CNC control The CNC controller allows the programming of up to 90 cutting programs with different cut lengths, quantities, and angles. Double-sided clamping positioning system The B&S pusher system, feed and positioning system, is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is a separate assembly and is guided by ball-bearing linear guides, precision-ground rack, and a robust frequency-driven gear motor.

Būklė: naujas, Cutting capacity at 90°: round 310 mm Gbedpfxod Iiprs Ac Dek Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw band length: 4020 x 34 x 1.1 mm Band speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Machine weight: approx. 0.99 t Space requirements: approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre cut left 45° automatic operation • Mitre cut left 60° semi-automatic operation (manual cuts without programming) • Material height sensor (automatic detection of cut start) • Frame and gearbox cast as one piece, very quiet operation and minimal vibrations • Removable chip tray (for cleaning) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Safety cover foldable • Fine adjustment of feed • Semi-automatic cutting! • With CNC control for workflow optimization Input options for parameters such as quantities and material lengths, automatic deduction of kerf • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with diverse section lengths • Automatic feeding unit (CNC) via ball screw, incremental feed with automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, minimum end piece 170 mm.

Būklė: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS • Mitre left 45°, automatic operation • Mitre left 60°, semi-automatic operation    (Cuts without programming) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Material height sensor (automatic detection of cut start) • Frame and gearbox made from a single casting, very quiet operation, minimal vibration • Removable swarf tray (for cleaning/disinfection) • Excellent accessibility to saw, material, and feed unit • Hinged safety cover • Fine adjustment for feed rate • Semi-automatic cutting! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after input of desired quantity and length: material approach, cutting operation, and piece counting until program completion • MPS control enables input of the desired number of feed strokes Gjded Iip Aspfx Ac Dobk • All essential machine data is displayed on the LED display during the cutting process (power consumption, cutting time, piece count) • Entered data are stored in RAM memory • The self-diagnostic circuit automatically displays all irregularities as error messages and monitors the entire process • Floating-mounted feed unit • Length setting via handwheel and vernier scale with mechanical position indicator.    Adjustable for cut lengths from 2.5 mm to 420 mm, or repeatable 1–29 times through reversing automation; remnant piece length 210 mm

Būklė: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw blade length 3375 x 27 x 0.9 mm Blade speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox cast in a single piece, very quiet and low-vibration cutting • Removable chip tray (designed for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material and feed unit • Foldable safety guard • Fine feed rate adjustment • Semi-automatic cutting! • CNC control for optimized workflows Godpfxeupw R Ae Ac Debk Allows input of various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. one sawing program with multiple cut lengths • Automatic (CNC) feed unit via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, minimum remnant length 170 mm. Including: - Micro-spraying device - Leveling elements

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used, among others, in: • Quality control (QC) • Final production tests • Laboratories and OEM test stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment Gbodpfsyc H N Nex Ac Djk • Last ETL factory calibration: 05/2023 • Weight: 38 kg ⸻ Equipment / included in the set • Main ATS 400 X8 unit with integrated touch screen • Windows 10 Pro (OEM) operating system • Complete set of test cables and accessories (as shown in the photos) • Manufacturer's documentation • Original markings, nameplates, CE ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • Ready for use in a production environment • No signs of tampering, complete set of connectors and interfaces

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: R6L211501, EMCO Turn S65 TM – 2-Axis CNC Lathe with EMCO SL1200 Short Bar Loader - 2-axis CNC lathe without tailstock, featuring driven tools and C-axis - 18 kW drive power - 0–4200 rpm spindle speed - Linear guide system - Digital drive system - Direct encoder on spindle - Sinumerik 828D with ShopTurn conversational programming Equipment - 12-position VDI 30 axial tool turret with directional logic for up to 12 powered tool holders (5 kW, 20 Nm, 0–5000 rpm) - C-axis for main spindle - Mechanical spindle brake (min. increment 0.01°) - Spindle head size 65 with spindle nose KK6 (DIN 55026) - Hollow clamping cylinder incl. draw tube - Machine lamp - Coolant system - Hydraulic unit - Interface for chip conveyor - Documentation Additional features - EMCO SL1200 Short Bar Loader — Attractive offer – flexible & worry-free Gbodpeyzn H Ujfx Ac Dek We not only offer you a high-quality product, but also tailored financing options customized to your needs. Whether down payment, installment plan, or individual financing models – together we will find the right solution. On request, we also take care of the entire transport logistics. From planning to reliable delivery, we ensure a smooth and on-time process, allowing you to focus on your business. 📞 Contact us for further information or a non-binding offer. We provide you with personal and professional advice. — Subject to change, errors, and prior sale.

Gamybos metai: 2020, būklė: naudotas, Matmenys (Plotis x Aukštis x Ilgis): apie 17x14x7,5 m, su 8 AutoStore robotais R5 AS-99188-DDG, Conveyor Ports 5.1-Narrow, 3 Carousel Ports 3.0, 3 Carousel Ports rėmais, 1 tinkleliu (krovimo rėmas), 1 apsauga (turėklai viršuje, aptarnavimo aikštelė, laiptai, kranas, MDF danga), apie 387 m³, programinė įranga, apie 8 400 sandėliavimo dėžių, vidinis matmuo: 603x403x310 mm, su Pick To Light sistema, detali informacija brėžinyje. DĖMESIO!!! Sandėliavimo sistemos išmontavimas turi būti baigtas iki gegužės pabaigos. Gsdpfxeyztibj Ac Dobk

Būklė: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, CNC ilginis tekinimo automatas Gamintojas: STAR Modelis: SR-32 Pagaminimo metai: 1999 su: FANUC 16-T valdymas Gsdpfsyzyr Nsx Ac Dsbk galinės pusės apdirbimas sinchroninis velenas varomieji įrankiai C ašis strypų padavėjas FMB TURBO 5-42

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Darbo režimas: pusiau automatinis Staklių tipas: horizontalioji juostinė pjovimo staklės Pjovimas: kampinis pjūvis Kampinio pjūvio diapazonas: -60° iki +60° Pavaros galia: 3 kW, 3 x 400 V/50 Hz Juostos greitis: 20–120 m/min Juostos matmenys: 4780 x 34 x 1,1 mm Medžiagos įkrovimo aukštis: 761 mm Trumpiausias likutis: 60 mm Pjovimo pajėgumai: Gbodpfx Aoyxcznec Dok - 0° = Apvalus D350 mm, Stačiakampis 510 x 350 mm, Kvadratas 350 mm - 45° dešinė = Apvalus D350 mm, Stačiakampis 400 x 100 mm, Kvadratas 340 mm - 45° kairė = Apvalus D350 mm, Stačiakampis 415 x 100 mm, Kvadratas 350 mm - 60° dešinė = Apvalus D250 mm, Stačiakampis 260 x 100 mm, Kvadratas 240 mm - 60° kairė = Apvalus D270 mm, Stačiakampis 280 x 100 mm, Kvadratas 260 mm Matmenys (IxPxA): 2570 x 1070 x 1500 mm Svoris: 710 kg

Būklė: naudotas, Gamybos metai: 2021, Number of spindles: 8 Bar capacity: 36 mm Gbsdpfewf D Szjx Ac Dek Control: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle bar automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36, equipped with bar loader and coolant system. The machine has only 6,944 spindle hours. The machine is in very good condition and can be inspected under power. For further equipment details, please refer to the original order confirmation attached to the offer. The machine operates with an EGS loading system -> This can be purchased separately. An extensive tooling package is included in the scope of delivery. A machine video from the factory location is available upon request. #Tags: MULTISPRINT36 | MULTISPRINT-36

Būklė: naudotas, Gamybos metai: 2019, Number of spindles: 8 Bar capacity: 36 mm Control: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle bar automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar loader and coolant system. The machine has only 15,666 operating hours (spindle hours). The machine is in very good condition and can be inspected under power. Please refer to the original order confirmation attached to the offer for further equipment details of this machine. The machine operates with an EGS loading system -> This can be purchased separately. A comprehensive tooling package is included in the scope of delivery. Gbjdpfewgi D Ejx Ac Dek - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Būklė: naudotas, Gamybos metai: 2019, Number of spindles: 8 Bar capacity: 36 mm Control unit: FANUC 30i-B Counter-spindle speed: 7,500 rpm Multi-spindle automatic lathe | DMG GILDEMEISTER - MULTISPRINT 36, equipped with bar loader and coolant system. The machine has only 15,650 spindle hours. Gbedpfx Acowf D S Is Dek The machine is in very good condition and can be inspected under power. For further equipment details, please refer to the original order confirmation included with the offer. The machine operates with an EGS loading system -> This can be purchased separately. A comprehensive tooling package is included in the scope of delivery. ----- #Tags: MULTISPRINT36 | MULTISPRINT-36

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Saw blade diameter: 360 / 400 / 425 mm Cutting diameter: 10 - 140 mm Cutting speed: 8 - 150 m/min Cooling water consumption: max. 40 l/min Material support height: 950 mm Clear passage between columns: 680 mm Control system: Siemens Simatic Total power requirement: 28 kW Machine weight: approx. 4.2 t Space requirement: approx. 2.8 x 1.8 x 2.2 m Suitable for: structural steels, stainless steels, tool steels Gedpfx Acevzt Eqo Dobk

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Pjovimo skersmuo: 400 x 260 mm Pjovimo juostos ilgis: 4640 mm Gedpfsymqwlox Ac Djbk Pjovimo plotis: 400 mm Bendras galios poreikis: 8 kW Staklių svoris: apie 2,2 t Reikalinga vieta: apie 2,6 x 1,8 x 1,8 m

Būklė: naudotas, Pjovimo sritis 90 laipsnių kampu: apvali 260 mm Pjovimo sritis 90 laipsnių kampu: kvadratinė 260 mm Pjovimo sritis 90 laipsnių kampu: plokščia 300 x 260 mm Pjūklo juostos matmenys: 4200 x 34 x 1,1 mm Pjūklo variklis: 4 kW Mūsų vertinimu, įrenginys yra geros naudotos būklės ir gali būti apžiūrėtas prijungtas prie elektros pagal susitarimą. Godeyukhmepfx Ac Dobk Priedai, paveikslėliuose matomi įrankiai ir spaustuvai į komplektą įtraukti tik tuo atveju, jei tai nurodyta papildomoje informacijoje. Techninių duomenų ir informacijos pakeitimai bei klaidos, taip pat tarpinis pardavimas galimi!

Būklė: naudotas, Gamintojas: Tucker Tipas: ERC80/ERF23FBGR/ERT Mūsų vertinimu, įrenginys yra geros naudotos būklės ir gali būti apžiūrėtas sujungtas prie elektros pagal susitarimą. Presavimo kniedijimo sistema: - ERC80 - ERF23 - BGR - ERT Gjdpfoxwp Nyox Ac Debk Prieinama apie 150 vienetų. Priedai, pavaizduoti įrankiai ir tvirtinimo priemonės yra įtraukiami į pristatymą tik tuo atveju, jei tai nurodyta papildomoje informacijoje. Techninių duomenų ir informacijos pakeitimai bei tarpinis pardavimas galimi!

Būklė: naudotas, Gamybos metai: 2015, Pjūklo disko skersmuo: 350 mm Pjovimo pajėgumas 90° (stačiakampis): 100 x 90 mm Pjovimo pajėgumas 90° (kvadratas): 90 x 90 mm Pjovimo pajėgumas 90° (apvalus): Ø 95 mm Pjovimo pajėgumas 45° (stačiakampis): 75 x 80 mm Pjovimo pajėgumas 45° (kvadratas): 75 x 75 mm Pjovimo pajėgumas 45° (apvalus): Ø 90 mm Veleno apsukos: 38/19 aps./min Godpfsygx Dysx Ac Dobk Variklio galia: 1,5 / 0,75 kW Mūsų vertinimu, įrenginys yra geros naudotos būklės ir, susitarus dėl laiko, gali būti apžiūrėtas prijungtas prie elektros. Priedai, pavaizduoti įrankiai ir prispaudimo priemonės į pristatymo komplektą įeina tik tuo atveju, jei tai yra nurodyta papildomoje informacijoje. Techniniai duomenys bei informacija gali būti keičiami ar netikslūs, taip pat parduodama tarpininkaujant!