Actas pirkti naudotą (820)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
Mažas skelbimas
Alfdorf
1 195 km
Transporto priekaba, sunkiasvorė priekaba,
Stapler >Center Fritz GmbHTPW 8000 AL - AS
Skambinti
Sąlyga: naujas, tuščias svoris: 2 000 kg, didžiausias leistinas svoris: 8 000 kg, bendras svoris: 10 000 kg, krovimo vietos ilgis: 6 000 mm, krovinių skyriaus plotis: 2 000 mm, bendras aukštis: 540 mm, spalva: oranžinė, Gamybos metai: 2026, TPW 8000 AL - As Industrial Heavy-Duty Transport Trailer
Blsdpshbicwsfx Adwod
Length 6000 mm, Width 2000 mm
Payload 8000 kg, All-wheel stub axle steering, 30 mm wooden transport deck, drawbar 1150 mm with 40 mm pin, bandage tires 425x150, painted in RAL 2000, double-acting wheel chock, 6 stop blocks per side for securing the load.
Mažas skelbimas
Güntersleben
1 112 km
Pasukamos lenkimo staklės Plokščių žirklės
SchechtlHT und KS
Skambinti
Sąlyga: geras (naudotas), Guillotine Shear HT 200
Capacity: 1.25mm steel – aluminium, etc. (higher possible)
Cutting length: slightly over 2m
Back gauge
Extendable front support
Folding Machine
KS – Capacity: 1mm steel – higher for aluminium (up to 1.5mm)
Bending length: slightly over 2m
Foot-operated clamp
Optional: back gauge or bead roller
Rollers and additional rails included
Sale according to §25a German VAT Act
Machines are in proper condition and ready for immediate use
Important!
Optionally, you can find and purchase many machines and machine accessories, such as various rails, back gauges – everything related to sheet metal and steelworking, including folding machines, guillotine shears, drilling machines, slip rollers, slitting and profiling machines, accessory parts (beading devices, forming rollers for gutter production, rear gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers in our shop. For any questions, I am always available.
You will receive an invoice in accordance with §25a UStG, the VAT is included in the invoice amount – margin scheme.
Free loading possible – weights approx. 750 kg and 650 kg respectively.
Bledeyknd Rjpfx Adwed
Inspection and testing are possible and encouraged by booking an appointment via phone.
Payment in cash upon collection. Benefit from our experience and expertise – we are happy to assist you.
Collection by the buyer (or a shipping agent instructed by the buyer) should take place within 10 days of the auction end.
Location: 97249 Eisingen, approximately 3 minutes from the A3 and A81 motorways.
Item numbers: Folding Machine KS and HT 260107 260108
Mažas skelbimas
Mindelheim
1 215 km
Dvigubo pasvirimo juostinis pjūklas
MIOTALS 255 DG
Skambinti
Sąlyga: naujas, Technical data:
Cutting capacity:
round 0°: 255 mm
square 0°: 200 x 200 mm
flat 0°: 320 x 200 mm
round 45°: 195 mm
square 45°: 195 x 195 mm
flat 45°: 195 mm
round 60°: 125 mm
square 60°: 125 x 125 mm
flat 60°: 130 x 120 mm
round -45°: 200 mm
square -45°: 170 x 170 mm
flat -45°: 200 x 170 mm
Cutting speeds: 35 / 70 m/min
Saw blade: 2750 x 27 x 0.9 mm
Working height approx.: 930 mm
Coolant pump: 100 W
Saw motor: 1.5 kW
Connection: 400 V
Dimensions LxWxH, approx.: 2000 x 1250 x 1900 mm
Weight, approx.: 350 kg
Features:
- Double miter saw with swiveling saw bow from left -45° to right +60°
- Ideal for machining pipes, profile sections, and solid materials made of stainless steel, iron, etc. in professional applications
- Large, heavy-duty cast saw arm for low-vibration operation
- Two saw band speeds for optimal adaptation to the workpiece
- Hydraulic downfeed cylinder
- Quick release vice for fast and easy clamping of workpieces
- Precise, adjustable saw blade guides for optimal cutting results
- CE/IEC marked, German documentation and German service
Bledpfx Adjd R Sipjwed
Scope of delivery:
- Saw blade
- Material stop
- Manometer (blade tension)
- Carbide saw blade guides
- Quick-action vice
- Integrated coolant system
- Hydraulic bow lowering
- Motor protection switch
- Automatic cut-off
- Base frame

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Borken
1 184 km
Dvigubo veikimo aukšto slėgio siurblys
ResatoP200-100-2/U/V
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2019, Air-operated double-acting high-pressure pump
The Resato P200-100-2 is an air-operated, double-acting high-pressure pump designed for generating fluid pressure in various industrial applications such as hydrostatic testing and chemical injection.
The Resato P200-100-2 pump operates on the principle of an automatically reciprocating differential piston to convert compressed air into high-pressure fluid flow.
Manufacturer: Resato
Model: P200-100-2/U/V
Type: Air-operated, double-acting high-pressure pump
Air piston diameter: 200 mm
Pressure ratio: 100
Flow rate: 6.6 l/min
Weight: 21 kg
Year: 2019
Max. outlet pressure
Regulated by the air supply pressure; at 7 bar (100 psi) air pressure, the static final pressure is up to 700 bar (~10,000 psi) (based on the Resato type chart for P200-100-1/P200-100-2).
Compatible media
Suitable for water, oil, or an emulsion of both. Can also be used with a wide range of chemical fluids.
Materials (media-contacting)
All wetted parts are made from specially selected stainless steel.
Operating medium (drive)
Can be operated with compressed air or nitrogen at a maximum pressure of 7 bar (100 psi).
Features
Reduced noise levels, minimized downtime thanks to easy maintenance of seals and check valves, freezing of the pump is avoided.
Applications
The P-Series, which includes the P200-100-2, is used across various industries including oil and gas, automotive, and research.
Bljdpfx Asyk Uc Hsdwsd
Typical applications include:
- Hydrostatic testing of hoses, valves, pipes, and pressure vessels
- Pressurization of hydraulic components
- (Chemical) injection
- Dismantling of bearings and bolt tensioning
- Research and development
More new and used items can be found in our shop!
International shipping costs on request!
Mažas skelbimas
Tradate
1 491 km
Šilkografijos mašina
SVECIASPM
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Faster than its equivalent sliding table press, the fixed table Printmaster is perfect for medium and long-run production, delivering excellent quality results on virtually any material up to 4 mm thick. And because the machine prints at incredible speed, the Printmaster is undoubtedly the best on the market. Among its numerous advanced features is the patented double gripper system, ensuring perfect registration and quiet operation. The Printmaster can also be equipped with a variety of optional systems and accessories, making it even more versatile, faster, and easier to use.
Integrated PLC control system.
Independent LCD touchscreen panel with
settings and monitoring for print parameters:
- job parameter storage system.
- settings diagnostics.
Blodsuptf Aspfx Adwjd
- variable squeegee and flood coater stroke lengths.
- adjustable clamp, squeegee, and flood coater speeds.
Motorized off-contact adjustment.
Hardened, self-leveling stop points combined with "locking" fingers for material control.
Maintenance-free toothed belt drive for the squeegee carriage.
Double grip bar shuttle system.
Folding feed table.
Fibre-optic registration control.
Ready for feeder addition.
High-strength steel lift columns.
Anodized aluminum work surface.
Printing frame insertion.
Universal self-adjusting clamps.
Pneumatic squeegee pressure equalizer.
Pneumatic squeegee and flood coater changeover.
Pneumatic locking of printing frame and rear bars.
Horizontal flooding.
Choice of immediate or delayed flooding.
Machine stop timer for peel-off action.
6-level adjustable peel adjustment.
Adjustable blow system.
Foot pedal.
Atraskite daugiau naudotų mašinų
Mažas skelbimas
Gais
1 245 km
Miško mulčiavimo mašina
BruggerFMP 225 Forstmulcher
Skambinti
Sąlyga: naujas, Brugger FMP 225 Forestry Mulcher – New, 225 cm Working Width, Ideal for Heavy Mulching Applications!
The Brugger FMP 225 is a robust forestry mulcher designed for use in agriculture, forestry, and on fallow land. Featuring a double belt drive, 36 tungsten carbide-tipped blades, and hydraulic features, it is perfectly suited for tractors from 110 hp – reliable, powerful, and built for demanding jobs.
Technical Data – Brugger FMP225:
Working width: 225 cm
Blodjwhyw Espfx Adwod
Drive: Double belt drive (5 + 5 V-belts)
PTO speed: 1000 rpm
Required power: 110 – 160 hp
Weight: approx. 1,800 kg
Attachment: Three-point linkage CAT II / III
Italian CMR gearbox
Rotor shaft Ø: 219 mm (465 mm with knives)
Blades: 36 pcs, tungsten carbide tipped
Working depth: –70 mm / –30 mm / +10 mm (3-way adjustable)
Housing: 8 mm wall thickness, 12 mm side panels
Hydraulic connections: 2x double-acting (1 for tailgate, 1 for pressure roller)
Features: Hydraulic rear gate & pressure roller
Including: PTO shaft
Prices + VAT:
Brugger FMP180 180cm – 30 hammers, 1,600kg = €10,900
Brugger FMP200 200cm – 32 hammers, 1,700kg = €11,900
Brugger FMP225 225cm – 36 hammers, 1,800kg = €12,900
-----
Contact us for a tailored quotation!
Mažas skelbimas
Gais
1 245 km
Mulčeris
BruggerFMP 225 Forstmulcher
Skambinti
Sąlyga: naujas, Brugger FMP 225 Forestry Mulcher – New, 225 cm Working Width, Ideal for Demanding Mulching Tasks!
The Brugger FMP 225 is a robust forestry mulcher designed for use in agriculture, forestry, and fallow land management. Featuring a dual belt drive, 36 carbide-tipped blades, and a comprehensive hydraulic package, this mulcher is perfectly suited for tractors from 110 HP upwards – reliable, powerful, and built for tough jobs.
Technical Data – Brugger FMP225:
Working width: 225 cm
Drive: Dual belt drive (5 + 5 V-belts)
PTO speed: 1000 rpm
Power requirement: 110 – 160 HP
Net weight: approx. 1,800 kg
Mounting: Three-point linkage CAT II / III
Italian CMR gearbox
Rotor shaft Ø: 219 mm (465 mm with blades)
Blades: 36 pcs., carbide-tipped
Working depth: –70 mm / –30 mm / +10 mm (3-step adjustable)
Housing: 8 mm wall thickness, 12 mm side panels
Hydraulic connections: 2x double-acting (1x for rear door, 1x for press roller)
Features: Hydraulic rear door & press roller
Includes: PTO shaft
Blodowhyzwspfx Adwjd
Prices + VAT:
Brugger FMP180 180cm – 30 hammers, 1,600kg = €10,900
Brugger FMP200 200cm – 32 hammers, 1,700kg = €11,900
Brugger FMP225 225cm – 36 hammers, 1,800kg = €12,900
-----
Contact us for a tailor-made offer!
Mažas skelbimas
Vokietija
1 104 km
Suvirinimo stalas
ProtecKT 300 OH
Skambinti
Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding Positioner KT 300
Load Capacity Horizontal: 300 kg, Tilted: 150 kg
Power Supply: 220V, 50 Hz
Table Diameter: 450 mm
Height: 500 mm
Tilt Range: continuously adjustable via geared crank motor 0 - 90°
Rotation Speed: 0.3 to 2.5 rpm
Incl. foot remote control
Optional extra:
Quick-action chuck
Diameter: 300 mm, €450.-
Bjdpfx Asc Ug Tlsdweld
Mažas skelbimas
Stolberg
1 275 km
3D skaitytuvas
Solutionix/MontagetischeSolutionix D500
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, 3D Scanner Solutionix D500
Year of manufacture: 2022
FeatureSpecificationCamera technology2 × 2.0 MP camerasLight sourceBlue LEDMeasurement accuracyUp to 0.01 mmPoint-to-point distance0.056 mmScan area (FOV)92 × 70 × 60 mmMeasurement rangeUp to approx. 120 mmVolume capture areaUp to 385 mm³TurntableIntegrated, fully automaticCalibrationFully automaticTexture captureHigh resolution, without additional color camerasInterfaceUSB 3.0 Type BSoftwareezScan 2017, compatible with Geomagic DesignX & ControlXTypical applicationsJewelry, precision engineering, reverse engineering, cultural assets, 3D printing
Mounting Table MT-400
Year of manufacture: 2015
Blsdpfxjxvyiuj Adwjd
FeatureSpecificationLoad capacityUp to 400 kgMax. plate size1200 × 1900 mmHeight adjustmentElectric, stepless, 750–1150 mm (partially up to 400 mm stroke)Tilt adjustmentElectric, 0–90°Support frameWith variable extension up to 300 mmPlate clampingVia vertical clamp or quick-action clampMobility4 swivel castors with total locksInstallation aidRoller rail for sliding the plate into the control cabinetMaterialPowder-coated steel base frame, MiniTec standard profiles
Mažas skelbimas
Crailsheim
1 155 km
Kranas
JMGMC 60S
Skambinti
Sąlyga: naudotas, bendras ilgis: 4 680 mm, Gamybos metai: 2017, keliamoji galia: 6 000 kg, - DRIVES: Front axle driven by two 3.5kW 72V AC electric motors, insulation class H
- BATTERY: 72V - 625 Ah with charge and battery level indicator – operating time up to 8 pure crane hours
- BRAKES: Automatic braking system acting on all wheels
- HYDRAULIC SYSTEM: Driven by low-noise gear pump (12kW), insulation class H – hydraulic controls via joystick and levers on the radio remote control – filter and safety valves – maximum operating pressure 22MPa
Bljdpsyfifxsfx Adwjd
- RADIO REMOTE CONTROL: For all crane and boom movements. If available, also for movements of hydraulic attachments
- FRAME: Manufactured from solid form sections and welded quality steel plates
- TYRES: Front: 2 super-elastic 250x15", Rear: 2 super-elastic 21x8-9"
- BOOM: Manufactured from solid form sections and welded quality steel plates, built with 4 fully hydraulic telescopic sections.
Boom angle: +60°/-15°
- REMOVABLE COUNTERWEIGHTS: Designed for quick removal and reinstallation to optimize ground and axle loads at any time
- STEERING: Rear-axle steering via electric motor. Steering angle +90°/-90°. Counter-rotation system on front axle
- MOTOR PUMP: Electric motor 12kW 72V AC, insulation class H
- L.M.I.: Electronic load limiter “CE Standard”, with safety lights and the following display indicators: lifted load, maximum liftable load, percentage load display, working radius, boom angle, selected program
Mažas skelbimas
Thalheim bei Wels
1 033 km
Apvalioji pjūklas lengviems metalams ir aliuminiui
OSTERBERGERZKM 520-20 Electronic
Skambinti
Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 520 mm, CNC-controlled double-head mitre circular saw with electronic saw unit swivel function
A high-performance circular saw designed for precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics.
The machine can be used for single cuts—simultaneously cutting the profile with two saw heads—or in automatic mode, where the double-head saw acts as a single-head automatic saw.
Bedpfxoyhzifj Adwjld
Electronic mitre angle adjustment of the saw heads.
Mitre angles are infinitely programmable between 20° and 135°
Saw blade drive power: 2 x 2.2 kW
Saw blade diameter: Ø 520 mm
Maximum cutting length with both saw heads simultaneously: 4,000 mm or 5,000 mm
Maximum/minimum cutting length in automatic mode: unlimited (the profile is pushed and pulled)
Length of the accompanying roller conveyor: 2,300 mm
Maximum required space: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m
Weight: approx. 1,500 kg / 1,700 kg.
- CNC control with touch screen and colour graphics on a movable control console
- Import and export of CSV / LTE files (for loading cutting lists from external design software)
- Graphical profile display
Optionally equipped with a label printer.
Mažas skelbimas
Lübeck
868 km
šaldymo tipo suspausto oro džiovintuvas
FriulairACT 80
Skambinti
Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, tūrio srautas: 486 m³/val, bendras plotis: 610 mm, bendras ilgis: 625 mm, bendras aukštis: 1 030 mm, bendras svoris: 92 kg, įėjimo įtampa: 230 V, aplinkos temperatūra (maks.): 50 °C, aplinkos temperatūra (min.): 1 °C, aušinimo tipas: oras, slėgis (maks.): 14 juosta, galia: 0,98 kW (1,33 AG), įėjimo dažnis: 50 Hz, Įranga: Tipinė plokštelė prieinama, Siūlome šį naują Friulair ACT 80 suspausto oro šaldytuvinį džiovintuvą, pagamintą 2022 m.
Įtampa: 230 V
Dažnis: 50 Hz
Galia: 0,98 kW
Srovės stipris: 4,6 A
maks. darbinis slėgis: 14 bar
Bjdpfxeyf Ears Adweld
Oro našumas: 8 100 l/min / 486 m3/h
Šaltnešis: R407C
Svoris: 105 kg (bruto)
Kondensato išleidiklis: Bekomat
Jei turite klausimų ar norėtumėte gauti daugiau informacijos, prašome parašyti mums žinutę arba paskambinti.
Mažas skelbimas
Oberkochen
1 179 km
Rėmo presas
S&SBavaria 2000 L - Video
Skambinti
Sąlyga: naujas, Working width: 4500 mm
Working height: 3000 mm
Number of pressing cylinders: 6 pcs.
Dimensions (Length/Width/Height): 5500 x 1400 x 3550 mm
Weight: 3000 kg
S&S Frame Press Bavaria 2000 L
---
NEW for the Holz-Handwerk 2026 trade fair in Nuremberg:
Now also available with semi-automatic positioning of the vertical pressing cylinders 1, 2, and 3 via approval button, including toggle switch ON/OFF for beam 2.
With automatic pressing cycle + manual control
for corner joints with mortise and tenon and dowel connections/mortised tenons,
switchable via selector switch on the control cabinet.
With basic equipment for optionally mounting counter profiles, should sash be folded on the loose part.
CE-compliant design
Base machine with a heavy-duty frame weldment, made from thick-walled special hollow sections.
Guide rails for the pressure beams at the press corners in wear-resistant, precision-machined design.
Fast, smooth manual width adjustment
via ball-bearing mounted carriage, locking in a 50 mm hole grid, optionally with motorized width adjustment and hydraulic clamping (at extra cost).
Bodpfxswg Hr Te Adwsld
Height adjustment and pressing performed by long-stroke cylinders in one operation. Right-hand press corners with integrated horizontal cylinders, thus no vertical positioning of the horizontal pressing cylinders is required, preventing cylinder collisions.
Bottom abutments can be set to the optimal insertion height in several positions.
3 kW compact hydraulic unit with integrated control block, variable pressure adjustment from 20 – 120 bar, manometer.
Control via push buttons with separate control circuits for the vertical and horizontal pressing cylinders, mounted on a freely movable control panel.
2 vertical double-acting pressing cylinders, stroke adapted to working height, piston diameter 60 mm, max. pressing force per cylinder 2100 kg.
2 horizontal double-acting pressing cylinders, 80 mm stroke, piston diameter 40 mm, max. pressing force per cylinder 1250 kg.
Abutment and pressure plate depth: 100 mm.
Control cabinet at machine base, left side, 400 Volt, 50 Hz; machine supplied with ready-to-connect 16 A plug.
Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey.
Working size: Length x Height = 4500 mm x 2750 mm
Note:
Actual working size: 4500 x 3000 mm (Length x Height)
Space requirement: 5600 mm x 1400 mm x 3550 mm (Length x Width x Height)
Article: Medium pressure beam, complete with pressure cylinder, pressure hose, and shut-off valve, up to 2750 mm high
Note: Actual working height: 3000 mm
Article:
Single pressure regulation for medium pressure beam,
Pressure regulation range up to max. 100 bar
(For pressing cross-bar windows)
Article:
Infinitely height-adjustable cross-pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve
Article:
Single pressure regulation for cross-pressure device
Pressure regulation range up to max. 100 bar
(For pressing cross-bar windows)
Article:
Shut-off valve at 3rd vertical cylinder
Article:
Shut-off valve at upper horizontal cylinder
Article:
Shut-off valve at lower horizontal cylinder
Article: x Control unit for angled windows ...
Mažas skelbimas
Vokietija
999 km
Traktorius
MANTGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES
Skambinti
Sąlyga: naudotas, Gamybos metai: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULICS AND GOOD TYRES | Tractor Unit | 396,459 kms
📍Location: Germany
🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs!
💰 Buy Now for EUR 19,900 or Make an Offer.
Payment on delivery available for a small fee (subject to approval)*
Bljdeyaik Dspfx Adwjd
👷♂️ Inspected by an independent expert
28 inspection points: 28 approved ✅ 0 incomplete ℹ️ 0 issues ⚠️
📌 Inspector's Comment:
The MAN truck was in good condition at the time of inspection, but most tyres will need replacing. The left rear mudguard is torn off. Unfortunately, the trailer could not be uncoupled, which restricted inspection of the truck. The cab could not be tilted due to lack of tools, so the engine inspection could not be performed. The truck is equipped with a double-acting hydraulic system with two hoses and an additional pump designed for a walking floor. The total height with the cab spoiler mounted is 3.9 m.
📄 Want to see the full inspection, extra photos, or a video?
Tip: The reference "31325 Equippo" is commonly used when searching for more details online.
💡 Why choose this machine and our service?
✔ Thorough inspection by professionals
✔ Delivery to your jobsite available
✔ Money-back guaranteed
✔ Secure and flexible payment options
🔄 Considering other equipment options?
We offer useful tools and resources for all equipment owners and operators – all easily accessible on our platform.
Mažas skelbimas
Brzesko
619 km
Hako Hakomatic B90 TB750 NAUJI AKUMULIATORIAI
HakoHakomatic B90 TB750 1299h NEW BATTERIES
Skambinti
Sąlyga: dilaminuotas dirbtuvėje (naudotas), veikimo valandos: 1 299 h, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 750 mm, plotas našumas: 3 700 m²/val, bendras svoris: 480 kg, garantijos trukmė: 12 mėnesiai, vandens talpos tūris: 90 l, The Hako Hakomatic B90 scrubber-dryer is a highly efficient machine designed for the toughest jobs in large-scale facilities. During the comprehensive inspection and refurbishment, our service team thoroughly checked all machine functions. All mechanical parts showing signs of wear were replaced with new components. This ensures a long, trouble-free operation without the need for future additional investment in the machine. The unit is now in perfect working condition and ready for immediate use. The machine comes with a 12-month warranty (excluding wear parts).
We offer the option to demonstrate the equipment via a live online connection, allowing you to see the machine in action with all functions and features. We are happy to answer any questions you may have.
Product advantages and features:
- NEW GEL BATTERIES 6V 175Ah SIAP (4x).
- 750 mm cleaning deck (TB750) equipped with two new medium-hardness disc brushes enables cleaning on all surfaces.
- New squeegee blades made of polyurethane, resistant to contact with oil, grease, and petroleum-based substances.
- Built-in battery charger and wheel drive facilitate daily operation.
- New protective rubber around the brush head prevents water from splashing beyond the machine’s contours.
- The unit is fitted with a new, durable drain hose as well as a new suction hose.
Bljdpfxjx Tg Eme Adwod
- The new suction turbine ensures high suction performance.
- Every machine we offer comes with custom photos — you buy exactly the unit you see.
Technical specifications:
- Supply voltage (V): 24
- Working width, brushes (mm): 750
- Working width, squeegee (mm): 1,100
- Theoretical coverage (m²/h): 3,700
- Working speed (km/h): 5
- Tank capacity (l): 85/85
- Weight (kg): approx. 480
- Power output (kW): 2.6
Installed equipment:
- NEW GEL BATTERIES 6V 175Ah SIAP (4x)
- NEW suction turbine 24V 500W
- NEW 380 mm PPL 0.5 disc brushes (2x)
- NEW drain hose
- NEW suction hose
- NEW protective rubber around the brush deck
- Built-in battery charger
- Squeegee blade with new oil-resistant rubbers
- Plus many other small components.
Mažas skelbimas
Borken
1 184 km
Kūno stangrinimo ir formavimo sistema
B&MT-Shape
Skambinti
Gamybos metai: 2020, Sąlyga: naujas, T-Shape 3 in 1 Multisystem // Year of manufacture: 2020
T-Shape combines 3 powerful technologies that act simultaneously to promote collagen production and significantly reduce local fat volume and skin elasticity. It ensures deep and immediate enhancement of blood circulation and lymphatic drainage, which in turn improves physical fitness.
- Skin firming
- Cellulite reduction
- Reduction of fat deposits
- Circumference reduction
- Post-liposuction treatment
- Facial lifting and skin tightening
RF (Radio frequency)
T-Shape generates bipolar, quadripolar, and hexapolar radio frequency signals. The contact of RF energy (radio frequency) with tissue impedance produces heat. With proper heating, the collagen-rich dermis is immediately denatured, fibrils contract and thicken. As a response to the initial heat, new collagen is produced, and the skin appears firmer, tighter, and younger.
Vacuum Suction
T-Shape is equipped with vacuum treatment technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to increase local blood circulation and stimulate lymphatic drainage. It promotes fibroblast activity and encourages vasodilation.
LLLT Laser
As the LLLT laser irradiates adipose tissue, it contributes to the formation of temporary micropores in the fat cells and accelerates the breakdown of triglycerides into glycerol and fatty acids, which can then escape from the cell, resulting in reduced cell volume. The released lipids are eliminated through normal metabolic processes. Targeted application of LLLT effectively reduces body circumference in the treated areas and has also proven effective in reducing edema.
Technical Data
Power supply: 220/230 Vac 50/60 Hz
Power consumption: 1300 W
Weight: 45 kg
Dimensions: 348x513x1008 mm
Low-power laser wavelength: 760 nm
Laser class: 3 R
Laser density: 8MW/cmq
Frequency of bipolar RF signal: 1500 kHz (1.5 MHz)
Bjdpfx Aorxri Sedwold
Maximum RF output: Less than 25 W
Vacuum suction power: Less than 80 kPa (0.8 bar)
Item condition: used, in good condition
Financing is also possible through our partner bank.
komplett-konzept.leasingo.de
You’ll find more items – new and used – in our shop!
International shipping costs on request!
Mažas skelbimas
Neukamperfehn
1 080 km
Z kampas Arrietierungwinkel Parama
Spanplattenauflage Mecalux/ Länge: 200mm/ für Traversenbreite 50 mm
Skambinti
Sąlyga: labai geros būklės (naudotas), Your contacts at our company:
Mr. Andre Evering
Mr. Mario Klöver
Mr. Falk Deutsch
Mr. Simon Blank
Scope of delivery includes:
01x Chipboard support, used
Manufacturer: Mecalux
Colour: orange
Total length: approx. 200 mm
Material thickness: approx. 1.5 mm
For chipboard thickness: approx. 22 mm
Beam support width: approx. 50 mm
Weight: approx. 0.455 kg / piece
Note:
- The inserted chipboard acts solely as anti-fall protection!
- Additional dimensions can be found in the attached drawing.
General information about the item:
This item is offered for collection only. If shipping or further transportation is required, additional costs will apply, which can be quoted separately depending on delivery location and scope.
Overview of our services:
(Prices on request)
Assembly & installation
Please observe our general assembly terms and conditions.
Racking inspection
Blsdpfxehy Nihe Adwsd
Racking inspection in accordance with DIN EN 15635, performed according to the requirements of BGR 234 visual inspection for all racking systems
Delivery with our own fleet (unloading not included)
Mažas skelbimas
Ennepetal
1 181 km
Surinkimo presas
Calende125 T Werkzeugprobierpresse
Skambinti
Sąlyga: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0319, spaudimo jėga: 125 t, Pressure: 125 t
Passage width: 1000 mm
Stroke: 500 mm
Machine weight approx. (without operating fluids): 6 t
Dimensions L x W x H: 2540 x 933 x 3000 mm
Return force: 12 t
Max. working height: 700 mm
Return speed: 25 mm/sec
Ram plate: 600 x 1300 mm
Table plate: 600 x 1300 mm
Table height above floor approx.: 850 mm
Oil cooling (electrical): 1.5 kW (max)
Motor power: 11 kW
Advance speed: 10 mm/sec
Pressing speed: 10 mm/sec
Oil tank: 250 l
Rapid traverse speed: 10 mm/sec
Column diameter: 120 mm
Operating principle of the tool testing press:
1. The main switch is activated by turning.
2. The press lighting should then be switched on.
3. The tool is placed in the pressure center of the press. If the tool requires higher force off-center (e.g. in progressive dies where the first station punches heavy gauge sheets while subsequent stations perform fine operations), the tool may need to be shifted slightly to the left or right so that the counterpressure from the material acts as centrally as possible on the ram.
4. The lower die is bolted onto the press table, and the upper die is then moved down.
Bljdefxykpepfx Adwsd
5. For this, switch the pump on at the control cabinet. The drop protection then releases the ram.
6. By gently pulling the control lever, the downward movement is initiated. The more the lever is pulled, the faster the press operates. For safety reasons, the maximum downward speed is limited to 10 mm/sec.
7. The pressing pressure is adjusted via a rotary control located on the right near the lever operation.
8. After the ram has reached the upper die, it is fastened to the ram.
9. Once any transport locks are removed, the press is opened by pressing the hand lever. The upward travel speed can be continuously adjusted between 0 and 25 mm/sec using the hand lever.
Mažas skelbimas
Friedrichsdorf
1 160 km
Tvirtas teleskopinis krautuvas
ManitouMLT 625 H CLASSIC
Skambinti
Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, veikimo valandos: 55 h, keliamoji galia: 2 500 kg, kėlimo aukštis: 5 850 mm, kuro tipas: dyzelinas, stiebo tipas: teleskopinis, statybinis aukštis: 1 980 mm, galia: 55 kW (74,78 AG), šakių ilgis: 1 200 mm, tuščias svoris: 4 710 kg, bendras ilgis: 3 894 mm, pavaros tipas: Diesel, statybos plotis: 1 813 mm, Rigid telehandler
Load centre: 500 mm
Mast type: telescopic
Transmission: hydrostatic
Speed class: 20 km/h
Technical condition: very good
Front tires type: pneumatic
Front tires size: 400-55 R17.5 149A8
Front tires condition: 80 - 100%
Rear tires type: pneumatic
Rear tires size: 400-55 R17.5 149A8
Rear tires condition: 80 - 100%
Description: The MLT 625-75 H telehandler is a highly compact machine. It has been specifically designed for agricultural applications and assists you with all daily tasks on your farm. Its extremely compact dimensions guarantee unmatched manoeuvrability and allow access to buildings and narrow areas. The comfortable cab, sound insulation (max. 76 dB), 360° all-round visibility, and JSM (Joystick Switch & Move) ensure long working days in complete safety with minimal operator fatigue. The Easy Connect System (ECS) makes changing attachments at the boom head easy, and the wide range of compatible attachments provides the versatility you need for your business. The hydraulic movements are precise and smooth, and the four powered and steerable wheels—which offer three different steering modes—ensure you can respond to any situation.
3rd hydraulic valve, rear work lights, front work lights, heating, street homologation (StVZO), full cab, CE certificate, interior mirror, exterior mirrors, beacon, windscreen wiper.
Short description and features: Classic Pack, quick oil drain device, diesel pre-heater, full cab with heating, mechanical Grammer fabric seat, sun visors for front and roof windows, interior rear-view mirror, car radio, phone holder, front left and right work lights, rear left and right work lights, rear-view mirror at the rear of the machine, roof window wiper, double-acting auxiliary hydraulics on the telescopic boom, fork carriage, 1200mm pallet forks, CE declaration.
Blsdpfxevf R D Eo Adwjd
Mažas skelbimas
Hessisch Lichtenau
1 040 km
CNC ciklinio valdymo tekinimo staklės, tekinimo staklės, automatinės tekinimo staklės, ciklinės teki
HARRISONAlpha 400 Plus
Skambinti
Sąlyga: naudotas, CNC cycle-controlled lathe HARRISON Type Alpha 400 Plus
Mach. No. P30180/150 Year of manufacture: 1998
Centre distance 1250 mm
Swing over bed 400 mm
Centre height 200 mm
Swing over cross slide 245 mm
Max. turning diameter in gap 585 mm
Bed width 313 mm
Cross travel (X-axis) 250 mm
Tailstock quill diameter 73 mm
Tailstock quill stroke 140 mm
Tailstock taper MK 5
Spindle bore 54 mm
Spindle nose size Camlock D1 Size 6
Spindle speed 20-2500 rpm
Spindle speed range (Level 1): 15-275 rpm
Spindle speed range (Level 2): 35-795 rpm
Spindle speed range (Level 3): 110-2500 rpm
Feed rate X and Z: 0.03 - 0.6 mm/rev.
Rapid traverse X-axis max. 2000 mm/min.
Bedpfx Aoh Hvk Aedwold
Rapid traverse Z-axis max. 4000 mm/min.
Thread cutting function: Metric / Inch / Diametral / Module
Spindle drive power 7.5 kW
Electrical connection 400 Volt, 50 Hz, 23.5 kVA
- Cycle control: Harrison Alpha / GE FANUC - Language in French (France)
- Automatic 3-range gearbox (15-275, 35-795, 110-2500 rpm)
- Electronic handwheels with various transmission ratios (1/10/100)
- 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws
- MULTIFIX quick-change toolholder size B with 2 tool inserts
- 1 live center
- 1 quick-action drill chuck RÖHM, 3-16 mm
- Hinged chuck guard
- Hinged working area safety doors
- Swarf tray with coolant device beneath the machine bed
- Control cabinet fixed to the machine
- RS 232 interface
Required space (L x W x H) 2600 x 1450 x 1550 mm
Weight 1950 kg
Good condition
Mažas skelbimas
Voerde (Niederrhein)
1 204 km
Diafragminis siurblys Kuro siurblys
ABELHMD-G-50-500 Schlammpumpe
Skambinti
Sąlyga: naujas, mašinos/transporto priemonės numeris: 85163, System: Electrohydraulic piston diaphragm pump (feeding pump / filling pump) NEW!
Type: Abel HMD-G-50-500
ID No.: 85163
Flow rate: 50 m³/h
Motor power: 30 kW
Motor speed: 1,465 rpm
Piston diameter: 200 mm
Suction side connection flange: DN 125 PN 16 DIN 2633
Pressure side connection flange: DN 100 PN 40 DIN 2635
Application: Filter press feeding
Suction flow stabilizer: including vacuum breaker 0.5 bar
Air supply manifold: suction and discharge side, incl. pressure reducer, solenoid valve, check and throttle valves
Other accessories: such as drain cock, manometer, etc.
Photo: similar construction
The Abel hydraulic diaphragm simplex piston pump, horizontal design, is double-acting, slow-running, self-priming, and safe for dry running. The pump flow rate is energy-efficiently regulated by a frequency converter, adjusting the drive speed based on the required delivery pressure.
Bljdpfsd Eyl Njx Adwjd
We also offer our high-pressure piston diaphragm pumps in special designs for tunnel construction.
Do you have specific requirements? Contact us for a quotation.
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Voerde
1 204 km
Hidraulinis Membraninis siurblys REWA ABEL
ABELHMD-G-50-500
Skambinti
Sąlyga: naujas, mašinos/transporto priemonės numeris: 85163, System: Electrohydraulic piston diaphragm pump (feed pump / filling pump) NEW!
Type: Abel HMD-G-50-500
ID No.: 85163
Flow rate: 50 m³/h
Motor power: 30 kW
Motor speed: 1465 rpm
Piston diameter: 200 mm
Suction-side connection flange: DN 125 PN 16 DIN 2633
Discharge-side connection flange: DN 100 PN 40 DIN 2635
Application: Filter press feeding
Suction flow stabilizer: including 0.5 bar vacuum breaker
Air supply unit: suction and discharge side, including pressure reducer, solenoid valve, check and throttle valves
Other accessories: such as drain cock, pressure gauge, etc.
Photo: design similar
The Abel hydraulic simplex piston diaphragm pump in horizontal design is double-acting, slow-running, self-priming, and protected against dry running. The pump’s delivery rate is energy-efficiently controlled by a frequency converter, with speed adjusted according to the discharge pressure.
Bedpfxed Ey I He Adwjld
We also offer our high-pressure piston diaphragm pumps in special designs for tunneling applications.
Do you have specific requirements? Contact us!
Mažas skelbimas
Voerde
1 204 km
Stūmoklio membranos siurblys Abel
ABEL / REWACM-G-C262
Skambinti
Sąlyga: naujas, mašinos/transporto priemonės numeris: 85162, Unit: Electrohydraulic piston diaphragm pump (feed pump / filling pump) NEW!
Type: Abel CM-G-C262
ID-No.: 85162
Blodpfx Asd E S Hbodwjd
Delivery rate: 10 m³/h
Motor power: 5.5 kW
Motor speed: 1450 rpm
Piston diameter: 130 mm
Suction side connection flange: DN 80 PN 16 DIN 2633
Discharge side connection flange: DN 80 PN 40 DIN 2635
Application: Filter press feed
Suction flow stabilizer: made of steel
Suction cross beam: 262, made of steel
Other accessories: such as drain valve, pressure gauge, etc.
Photo: similar design
The Abel hydraulic diaphragm simplex piston pump, horizontal version, is double-acting, slow-running, self-priming, and safe for dry running. The pump output is controlled efficiently via a frequency converter using speed-controlled drive depending on delivery pressure, saving energy.
We also offer our piston diaphragm high-pressure pumps in special tunneling configurations.
Do you have special requirements? Contact us.
Mažas skelbimas
Voerde
1 204 km
Stūmoklio membranos siurblys Abel
ABEL / REWACM-G-C262
Skambinti
Sąlyga: naujas, mašinos/transporto priemonės numeris: 85162, Unit: Electrohydraulic piston diaphragm pump (feed pump / filling pump) NEW!
Type: Abel CM-G-C262
ID No.: 85162-2
Delivery rate: 10 m³/h
Motor power: 5.5 kW
Motor speed: 1450 rpm
Piston diameter: 130 mm
Suction-side connection flange: DN 80 PN 16 DIN 2633
Discharge-side connection flange: DN 80 PN 40 DIN 2635
Application: Filter press feed
Suction pulsation damper: made of steel
Suction beam: 262, made of steel
Bsdpfjd E S Scex Adwold
Additional accessories: such as drain valve, pressure gauge, etc.
Photo: similar to illustration
The Abel hydraulic diaphragm simplex piston pump, horizontal design, is double-acting, operates at low speed, is self-priming, and safe for dry running. The pump's flow rate is efficiently controlled via frequency converter using a variable speed drive dependent on discharge pressure.
We also offer our piston diaphragm high-pressure pumps in special designs for tunnel construction.
Do you have specific requirements? Please contact us.
Mažas skelbimas
Voerde
1 204 km
Stūmoklio membranos siurblys Abel
ABEL / REWACM-G-C262
Skambinti
Sąlyga: naujas, mašinos/transporto priemonės numeris: 85162, System: Electrohydraulic piston diaphragm pump (feed pump / filling pump) NEW!
Type: Abel CM-G-C262
ID No.: 85162-3
Flow rate: 10 m³/h
Motor power: 5.5 kW
Motor speed: 1450 rpm
Piston diameter: 130 mm
Suction side connection flange: DN 80 PN 16 DIN 2633
Discharge side connection flange: DN 80 PN 40 DIN 2635
Application: filter press feeding
Suction flow stabilizer: made of steel
Suction crossbeam: 262, made of steel
Other accessories: such as drain valve, pressure gauge, etc.
Photo: similar construction
The Abel hydraulic diaphragm simplex piston pump, in horizontal design, is double-acting, slow-running, self-priming, and safe for dry running. The pump flow is regulated in an energy-efficient manner by a frequency converter, with the drive speed controlled based on the discharge pressure.
Bedpfx Ajd E S Sfedwsld
We also offer our piston diaphragm high-pressure pumps in specialized tunnel construction versions.
Do you have specific requirements? Contact us for more information.
Palengviname jums paiešką: "actas"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Actas (820)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
























































































































































































