Šildomas pirkti naudotą (176)

Sąlyga: naudotas, bakelio talpa: 2 750 l, GENERAL Design: Suspended Remarks: 2 lugs made of Fe (support surface reversed with cut-off steel parts; see photos); Further technical documentation available Speed: 313 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,050 mm Heating/cooling: Available Power: 1.1 kW Max. permissible operating overpressure: 12.0 bar Max. overpressure: 3.2 bar Agitator: Propeller Mounting type: Lugs Location: Bremen Technical documents: Drawing Cylinder tempering: Half-pipe coil Lsdpfx Aaexqa S Soasrw Nameplate: Vacuum: 1.0 bar Volume: 2,750 litres Jacket volume: 62.0 litres Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 1,410 mm Last application: Pharmaceutical chemistry TANK Max. operating temperature / °C: 200 °C HEATING/COOLING JACKET Bottom tempering: Half-pipe coil EQUIPMENT Manway / Dome: On top cover Outlet: Available Outlet (alternative specification): 130 mm Remark: Manway cover plated, metallic discolorations inside MATERIAL SPECIFICATION Temper system material: V2A 1.4541 (AISI304) AGITATOR Voltage: 220/380 Volt Agitator arrangement: Eccentric in top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Top wall thickness: 7 mm

Sąlyga: naudotas, bakelio talpa: 1 345 l, GENERAL Design: suspended Remarks: 2 feet made of V2A stainless steel (bearing surface reversed; see photos); 1 vessel is equipped with insulation (see photos); some flanges made of Fe Speed: 313 rpm Internal diameter: 1,000 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Total height: 2,900 mm Heating/Cooling: available Ljdpsxqa S Eofx Aaasrw Power: 1.1 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted cover Agitator: propeller Support type: feet Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,345 liters Double jacket volume: 24.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,370 mm Previous use: pharmaceutical chemicals VESSEL Max. operating temperature vessel / °C: 200°C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: flange DN80 Note: minor residues MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 V Agitator arrangement: eccentric on top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.4 mm

Sąlyga: naudotas, bakelio talpa: 3 532 l, GENERAL Design: suspended Remarks: 3 support lugs made of Fe; half-pipe coil around the lower cylinder area; 1 heating connection likely slightly bent Speed: 313 rpm Outer diameter: 1,800 mm Inner diameter: 1,590 mm Total height: 3,300 mm Heating/cooling: available Insulation: available Power: 1.1 kW Max. perm. operating temperature: 100 °C Max. perm. operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Shaft seal: mechanical seal without thermosiphon vessel Agitator: propeller Support type: lugs Location: Bremen Cylinder temperature control: half-pipe coil Lrsdexqa Srepfx Aaaew Nameplate: Vacuum: 1.0 bar Volume: 3,532 liters Double jacket volume: 103.0 liters Double jacket material: V2A 1.4301 (AISI304) Product contact material: V4A 1.4429 (AISI316) Condition: used Last application: pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 100 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation material: aluminium EQUIPMENT Manhole / dome: in the top (DN 500) Outlet: available Note: dents on insulation jacket, manhole cover cladded AGITATOR Agitator arrangement: eccentric in the top Agitator equipment: comprehensive agitator documentation available

Sąlyga: naudotas, bakelio talpa: 1 969 l, GENERAL INFORMATION Design: suspended Remarks: 2 V2A brackets (support surface reversed; see photos) Speed: 571 rpm Internal diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 3,800 mm Heating/cooling: available Power: 1.1 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Mechanical seal: mechanical seal without thermosiphon vessel Agitator: propeller type Ledjxqa Slopfx Aaajrw Support type: feet/brackets Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: available Vacuum: 1.0 bar Volume: 1,969 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 6 mm Product contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,110 mm Previous application: pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: flange DN80 Note: minor residues/attachments MATERIAL SPECIFICATION Temperature system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric in top head Agitator equipment: technical documentation for agitator available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.7 mm

Sąlyga: naudotas, bakelio talpa: 1 300 l, GENERAL INFORMATION Design: Suspended Remarks: One container is missing the agitator; one container with insulation; two cleats made of V2A (support surface inverted); flanges partially made of Fe (see photos) Speed: 571 RPM Internal diameter: 990 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Heating/Cooling: Available Power: 1.1 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: Bolted lid Agitator: Propeller Base design: Cleats Location: Bremen Technical documentation: Drawing Shell tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,300 liters Double jacket volume: 23.0 liters Cylinder wall thickness: 5 mm Ledpfx Aaexqa Sfeajrw Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 1,330 mm Previous application: Pharmaceutical chemicals VESSEL Max. operating temperature vessel / °C: 200°C HEATING/COOLING JACKET Bottom tempering: Half-pipe coil EQUIPMENT Outlet: Flange DN80 Note: minor residues/adhesions MATERIAL SPECIFICATION Material tempering system: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 Volt Agitator arrangement: Eccentric in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3 mm Top head wall thickness: 4.1 mm

Sąlyga: naudotas, bakelio talpa: 2 765 l, GENERAL INFORMATION Design: Suspended Remarks: Container exterior sandblasted and primed; double jacket bolted to the bottom (see photos); 4 feet made of steel; exterior surface partially corroded (potentially in need of repair) Speed: 167 rpm Ledpoxqa R Uofx Aaaorw Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 3,350 mm Heating/Cooling: Available Power: 2.6 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 6.0 bar Agitator: Propeller Foot design: Base plates Location: Bremen Technical documentation: Drawings, TÜV certificates Nameplate: Vacuum: 1.0 bar Volume: 2,765 liters Double jacket volume: 42.0 liters Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4541 (AISI 304) Product-contact material: V4A 1.4571 (AISI 316) Condition: Used Cylindrical height: 1,390 mm Previous application: Chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Bottom temperature control: Double jacket FEATURES Discharge: Flange DN80 Note: Slight residues AGITATOR Agitator manufacturer: Ekato Voltage: 500 V Power disruptor: Agitator arrangement: Centrally on top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Top wall thickness: 9 mm

Sąlyga: naudotas, bakelio talpa: 2 750 l, GENERAL INFORMATION Design: suspended Remarks: Support ring Fe; manhole davit bent Speed: 323 rpm Internal diameter: 1,390 mm Explosion protected: Motor is explosion protected (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,150 mm Heating/cooling: available Power: 2.6 kW Max. permissible operating temperature: 200 °C Lrodpfjxqa R Iex Aaajw Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: propeller Base type: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,750 litres Double jacket volume: 62.0 litres Product-contacting material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,380 mm Previous application: pharmaceutical chemistry TANK Max. operating temperature of tank / °C: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: in top bottom (DN 500) Outlet: flange DN100 Note: Manhole cover plated MATERIAL PROPERTIES Material of temperature control system: V2A 1.4541 (AISI 304) AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric in top bottom

Sąlyga: naudotas, bakelio talpa: 2 500 l, GENERAL INFORMATION Equipment: Crane lugs Design: suspended Notes: Support ring made of Fe; minor dents in the insulation jacket; manway cover partially plated; manway diameter 490 mm Speed: 307 rpm Outer diameter: 1,880 mm Inner diameter: 1,590 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,250 mm Heating/Cooling: available Insulation: present Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: propeller type Base design: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Lredpfxjxqa Rzs Aaajw Jacket volume: 180.0 liters Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Previous application: chemical industry VESSEL Max. vessel operating temperature / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum jacket/tube space / bar: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation jacket material: Aluminium EQUIPMENT Manway / dome: in top head Outlet (alternate entry): 130 mm Note: slight residues MATERIAL SPECIFICATION Material temperature control system: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 volts Interference suppressor: Agitator arrangement: centered in top head

Sąlyga: naudotas, bakelio talpa: 1 345 l, GENERAL INFORMATION Construction type: hanging Remarks: 2 pieces of feet made from V2A (contact surface inverted; see photos); some flanges made from Fe; heating connections cut off; minor sheet metal cutouts in the insulation jacket Speed: 313 rpm Outer diameter: 1,250 mm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 2,950 mm Heating/Cooling: available Insulation: available Power: 1.1 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Agitator: propeller Mounting type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,345 liters Double jacket volume: 24.0 liters Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,360 mm Previous application: Pharmaceutical chemistry TANK Max. operating temperature tank / °C: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket material: aluminum EQUIPMENT Lodpfxsxqa N Re Aaaerw Outlet: flange DN80 Remark: slight adhesions, pressure marks on insulation jacket MATERIAL QUALITY Temperature control system material: V2A 1.4301 (AISI 304) AGITATOR Voltage: 220/380 Volts Agitator arrangement: eccentric in the top head

Sąlyga: naudotas, bakelio talpa: 10 875 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; in some cases, the top cover flanges have been internally welded shut with stainless steel plates by the previous operator (in some of these plates, an opening has also been cut; see photos); manway diameter 480 mm Speed: 78 rpm Internal diameter: 2,170 mm Total height: 5,050 mm Heating/Cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Base design: Ring Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Double jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Lredpfxoxqa Nwe Aaajw Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 2,200 mm Previous application: Adhesive industry TANK Max. operating temperature (tank) / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum (double jacket / pipe area / bar): 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway/dome: on top cover Outlet: available Outlet (alternative input): 100 mm Note: slight residues, manway cover missing MATERIAL SPECIFICATION Flange material: Steel AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 volts Agitator arrangement: centrally on top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Top wall thickness: 14 mm

Sąlyga: naudotas, Gamybos metai: 2001, bakelio talpa: 280 l, GENERAL INFORMATION Equipment: Control cabinet (without guarantee) Design: upright Year of construction: 2001 Remarks: Max. permissible temperature in test certificate: -10/+120° C; vessel drawing in JPEG format and installation drawing available Speed: 339 rpm Outside diameter: 900 mm Inside diameter: 740 mm Total height: 2,100 mm Heating/Cooling: available Insulation: available Power: 0.55 kW Max. permissible operating temperature: 130 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.5 bar Top cover: removable/top-hinged Agitator: magnetic stirrer Support type: mobile on castors Lodpfoxqa Nkex Aaasrw Location: Bremen Technical documentation: acceptance certificate Cylinder tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 280 litres Double jacket volume: 28.0 litres Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 630 mm Last application: pharmaceuticals VESSEL Max. operating temperature vessel / °C: 130 °C Number of feet: 4 pieces HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe chamber / bar: 1.0 bar Bottom tempering: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FEATURES Outlet: available MATERIAL SPECIFICATION External surface: ground Internal surface: ground Feet material: stainless steel AGITATOR Voltage Volt: 230/400 Volt Agitator arrangement: bottom-mounted

Sąlyga: naudotas, bakelio talpa: 1 500 l, GENERAL Equipment: Ventilation, disc valve Design: upright Notes: Adjustable cap screws for the feet are missing; hand lever for the disc valve is missing; manhole cover not suitable for an operating pressure of 2 bar (the tank was last operated, probably as a non-pressurized vessel by the previous owner and the cover was replaced accordingly) Outer diameter: 1,300 mm Inner diameter: 1,150 mm Total height: 2,700 mm Heating/Cooling: equipped Insulation: present Max. permissible operating temperature: 20°C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.0 bar Agitator: agitator flange Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 1,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,550 mm Lrodexqa Itjpfx Aaajw Previous application: dairy TANK Max. tank operating temperature / °C: 120°C Bottom: flat bottom with slope Number of feet: 3 HEATING/COOLING JACKET Bottom temperature control: thermoplate INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top (Ø 430) Outlet: DN65 DIN 11851 Note: dents on the insulation jacket, functionality of the double jacket not tested MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator arrangement: eccentric in the top head

Sąlyga: naudotas, Gamybos metai: 2015, bakelio talpa: 400 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Year of manufacture: 2015 Remarks: Discharge valve incomplete (see photos); Technical documentation is available from the manufacturer and can be requested and purchased there Speed: 377 rpm Lrodpfx Asxqa Hvoaasw External diameter: 910 mm Internal diameter: 770 mm Total height: 1,830 mm Heating/Cooling: available Insulation: available Power: 0.55 kW Max. permissible operating temperature: 165 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Top cover: removable / hinged top cover Agitator: magnetic stirrer Support type: feet Location: Bremen Cylinder temperature control: thermoplate Nameplate: Vacuum: 1.0 bar Volume: 400 liters Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Last intended use: pharmaceuticals TANK Max. operating temperature tank / °C: 165 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum jacket / pipe space / bar: 1.0 bar Bottom temperature control: thermoplate INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Discharge (alternative input): available mm MATERIAL PROPERTIES Outer surface: ground Inner surface: ground Feet material: stainless steel AGITATOR Agitator manufacturer: Millipore Voltage: 230/400 Volt Agitator arrangement: bottom-mounted

Sąlyga: naudotas, bakelio talpa: 5 400 l, GENERAL Features: Crane lugs Lsdpjxqa Dnjfx Aaaorw Design: suspended Remarks: Support ring made of Fe; half-pipe coil not shown in vessel drawing Speed: 450 rpm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,700 mm Heating/Cooling: available Power: 3.6 kW Max. overpressure: 6.0 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Propeller Base type: Ring Location: Bremen Technical documentation: Drawing, inspection certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,400 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,690 mm Last application: Chemical industry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Dome: in upper head (DN 500) Outlet: Flange DN100 Note: slight residues MATERIAL QUALITY Temperature control system material: V2A 1.4541 (AISI 304) AGITATOR Agitator manufacturer: Ekato Voltage: 400/690 Volt Bottom bearing: Agitator arrangement: eccentric in upper head Agitator documentation: Comprehensive agitator documentation available TECHNICAL DATA / DIMENSIONS Lower head wall thickness: 8 mm Upper head wall thickness: 16 mm

Sąlyga: naudotas, bakelio talpa: 568 l, GENERAL INFORMATION Equipment: Control cabinet (no guarantee) Design: upright Outer diameter: 900 mm Inner diameter: 810 mm Total height: 1,830 mm Heating/cooling: available Max. permissible operating temperature: 134°C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 2.0 bar Top cover: removable / hinged top cover Agitator: agitator flange Mounting style: mobile on castors Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 568 litres Double jacket volume: 108.0 litres Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 850 mm Previous application: pharmaceuticals TANK Max. operating temperature (tank) / °C: 134°C Number of feet: 4 pcs HEATING / COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Discharge (alternative entry): 23 mm Note: scratches inside MATERIAL SPECIFICATION External surface: polished Internal surface: ground Material of temperature control system: V2A 1.4301 (AISI 304) Material of feet: stainless steel Lrodpfexqa Dhex Aaaow AGITATOR Agitator arrangement: eccentric in the top cover

Sąlyga: naudotas, bakelio talpa: 5 500 l, GENERAL Equipment: Crane lugs Design: upright Remarks: Dents in the insulation jacket possible; manufacturing and documentation drawings are available from the manufacturer and can be purchased separately Speed: 429 rpm Outer diameter: 1,890 mm Inner diameter: 1,680 mm Overall height: 3,500 mm Heating/Cooling: available Insulation: available Power: 2.2 kW Max. permissible operating temperature: 140 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Agitator: propeller Base type: height-adjustable feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,500 liters Double jacket volume: 154.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Last application: brine Lredpfx Aexqazasaajw TANK Max. operating temperature tank / °C: 140 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway/dome: in top head (DN 400) Discharge (alternative entry): 38 mm Note: slight residues, discharge end cut off MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR Agitator manufacturer: PRG Voltage: 230/400 V Agitator arrangement: bottom-mounted

Sąlyga: naudotas, bakelio talpa: 120 l, BENDRA INFORMACIJA Konstrukcijos tipas: vertikalus Pastabos: važiuojamasis rėmas iš V2A nerūdijančio plieno; dangčio spaustuko žiedas trūksta Išorinis skersmuo: 500 mm Vidinis skersmuo: 400 mm Bendras aukštis: 1 200 mm Šildymas / aušinimas: yra Didž. leidžiama darbinė temperatūra: 15 °C Didž. leidžiamas darbinis viršslėgis: 1.0 bar Didž. viršslėgis: 1.5 bar Viršutinis dangtis: nuimamas / atverčiamas viršus Maišytuvas: magnetinis maišytuvas Pastatymo tipas: mobilus rėmas Vieta: Bremen Cilindro temperavimas: dvigubas apvalkalas Tipinė lentelė: Tūris: 120 litrų Dvigubo apvalkalo tūris: 16,0 litrų Dvigubo apvalkalo medžiaga: V2A 1.4301 (AISI304) Lsdpfoxqay Njx Aaaerw Gaminio sąlyčio medžiaga: V4A 1.4435 (AISI316) Būklė: naudotas Cilindro aukštis: 750 mm Paskutinis naudojimas: farmacija TALPYKLA Didž. darbinė temperatūra talpykloje / °C: 130 °C ĮRANGA Išleidimo anga (alternatyvus įrašas): 35 mm MEDŽIAGOS CHARAKTERISTIKOS Išorinis paviršius: šlifuotas Vidinis paviršius: poliruotas MAIŠYTUVO DALYS Maišytuvo padėtis: apatinis dangtis Maišytuvo įranga: variklio / pavarų agregatas magnetiniam maišytuvui nėra

Sąlyga: naudotas, bakelio talpa: 313 l, GENERAL INFORMATION Design: upright/vertical Remarks: Frame made of V2A stainless steel (the control cabinet enclosures visible in the photos are empty); minor dents inside the vessels; top covers made of V2A (suspensions and mounting screws for the top covers are missing) External diameter: 730 mm Internal diameter: 620 mm Total height: 1,600 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Top cover: removable/openable Lrsdpfjxqayvex Aaaew Agitator: agitator flange Support type: mobile frame Location: Bremen Jacketed vessel: double jacket Nameplate: Volume: 313 litres Jacket volume: 15.0 litres Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 830 mm Last application: Pharmaceutical industry VESSEL Max. operating temperature vessel/°C: 143 °C HEATING/COOLING JACKET Bottom tempering: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Outlet (alternative entry): 45 mm Note: Outlet pipe cut off, metallic discolorations inside MATERIAL SPECIFICATIONS Top cover material: AISI304 (V2A) 1.4301 Jacket system material: V2A 1.4301 (AISI304) AGITATOR Flow breaker: Agitator position: bottom Agitator features: One vessel still has a magnetic stirrer; motor/gear units are no longer available

Sąlyga: naudotas, bakelio talpa: 3 690 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Manhole cover incomplete (e.g. sight glass missing, see photos); support ring made of Fe Speed: 6 - 32 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be checked) Total height: 4,350 mm Heating/cooling: present Power: 11 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Stand type: Ring Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,690 liters Lrjdpfx Aajxqayieajw Double jacket volume: 145.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: Used Cylindrical height: 1,380 mm Last application: Pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom tempering: Half-pipe coil FEATURES Manhole / Dome: in the top head (DN 500) Outlet (alternative entry): 130 mm MATERIAL SPECIFICATION Material tempering system: AISI 304 (V2A) 1.4306 AGITATOR Agitator manufacturer: Ekato Voltage: 400 Volt Agitator arrangement: central in top head Agitator features: Agitator drive was controlled by external frequency converter (no longer available) with the previous owner; various technical documents for the agitator available TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 6.5 mm Top head wall thickness: 7.9 mm

Sąlyga: naudotas, bakelio talpa: 2 420 l, GENERAL INFORMATION Features: Crane lugs Design: Suspended Remarks: Manway DN 350/450 (manway cover incomplete); support ring, Fe; some flanges Fe Speed: 46 - 230 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,400 mm Heating/Cooling: Available Power: 2.2 kW Max. permitted operating temperature: 200°C Max. permitted operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top head: Removable / hinged top head RW Sealing: Mechanical seal with thermosiphon vessel Agitator: Paddle agitator Support type: Ring Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,420 liters Double jacket volume: 100.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: Used Cylindrical height: 1,180 mm Lodpfx Aaexqaycoajrw Last application: Pharmaceutical chemistry TANK Max. operating temperature tank / °C: 200°C HEATING/COOLING JACKET Max. permissible operating vacuum for double jacket / tube space / bar: 1.0 bar Bottom head tempering: Half-pipe coil EQUIPMENT Manway / dome: In the top head Outlet: Available MATERIAL SPECIFICATION Tempering system material: AISI 304 (V2A) 1.4306 AGITATOR Agitator manufacturer: Ekato Voltage: 400 Volt Baffles: Agitator arrangement: Centered in the top head Agitator features: Paddle & propeller agitator elements mounted on the shaft; speed was controlled by previous owner via external speed controller (no longer available); various technical documents available for the agitator TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 6.1 mm Top head wall thickness: 7 mm

Sąlyga: naudotas, bakelio talpa: 3 690 l, GENERAL Design: suspended Remarks: Support ring made of Fe; manway cover incomplete; for one vessel, the heating connections have been mostly cut off and are supplied loose; 1 vessel has a total height approx. 100 mm shorter due to different motor/gearbox units Speed: 42 - 211 rpm Ledpoxqax Ejfx Aaasrw Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 3,750 mm Heating/cooling: available Power: 3 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: beam agitator Support type: ring Location: Bremen Technical documentation: drawing, various documents, acceptance certificate Cylinder temperature control: half-pipe coil Type plate: Vacuum: 1.0 bar Volume: 3,690 liters Double jacket volume: 145.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Previous application: pharmaceutical chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Base temperature control: half-pipe coil FITTINGS Manway / dome: in top head (DN 500) Outlet (alternative input): 130 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR Agitator manufacturer: Ekato Voltage: 400 volt Agitator arrangement: centrally in top head Agitator configuration: Slight differences in agitator design (Interprop beam agitator installed on the shaft for media up to approx. 3,000 mPas; for one of the vessels, there is additionally a stabilizing propeller installed on the shaft); speed range adjustable via external frequency converter (no longer available) (for one of the two agitators, the speed range is 25 - 126 rpm); some technical documentation for the agitators available TECHNICAL DATA / MEASUREMENTS Bottom wall thickness: 6.1 mm Top wall thickness: 7.9 mm

Sąlyga: naudotas, bakelio talpa: 3 586 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Sight glasses in manhole covers missing; support ring made of Fe; flanges partially made of Fe Speed: 30-184 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,750 mm Heating/Cooling: Available Lrjdpfxjxqaxxo Aaasw Power: 6.8 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: Beam agitator Stand type: Ring Location: Bremen Technical documentation: Drawing, various documents, acceptance certificate Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,586 liters Double-jacket volume: 202.0 liters Cylinder wall thickness: 6 mm Product wetted material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,377 mm Last application: Pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom tempering: Half-pipe coil EQUIPMENT Manhole / dome: in upper head (DN 500) Outlet (alternative input): 130 mm MATERIAL QUALITY Material of tempering system: AISI 304 (V2A) 1.4306 AGITATOR Agitator manufacturer: Ekato Voltage: 400/690 volts Interference suppressor: Agitator arrangement: Central in upper head Agitator features: Technical documentation for agitator available; Interprop beam agitator and inclined blade agitator mounted on shaft; drive adjustable via handwheel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Upper head wall thickness: 9.1 mm

Sąlyga: naudotas, bakelio talpa: 3 586 l, GENERAL Equipment: Lifting lugs for crane Design: Suspended Remarks: Further technical documentation available; sight glass on manhole cover missing; support ring made of Fe; some flanges made of Fe Speed: 6 - 40 rpm Internal diameter: 1,600 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 4,250 mm Ledpfx Aajxqaxrsajrw Heating/Cooling: available Power: 3.5 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Base design: Ring Location: Bremen Technical documentation: Drawing, inspection certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,586 litres Double jacket volume: 202.0 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,377 mm Previous application: Pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible vacuum double jacket / pipe space / bar: 1.0 bar Base temperature control: Half-pipe coil EQUIPMENT Manhole / dome: in the top head (DN 500) MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 400/690 volts Agitator arrangement: centrally in the top head Agitator features: Speed adjustable via handwheel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Top wall thickness: 9.1 mm

Sąlyga: naudotas, bakelio talpa: 2 500 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: 4 mounting feet made of V2A; manhole cover fixing bolts incomplete; a previous connection in the top head was welded shut by the former operator Internal diameter: 1,390 mm Overall height: 3,000 mm Heating/Cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Agitator: Blade agitator Agitator flange: agitator flange Support type: Mounting feet Lsdpfxjxqaw Is Aaajrw Location: Bremen Cylinder jacket tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 litres Double shell volume: 35.0 litres Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,500 mm Last intended use: Chemical TANK Max. operating temperature tank / °C: 190 °C HEATING / COOLING JACKET Lower head tempering: half-pipe coil EQUIPMENT Manhole / inspection port: in upper head (DN 500) Outlet: Flange DN50 Note: minor residues, motor/gearbox missing MATERIAL SPECIFICATION Tempering system material: V2A 1.4541 (AISI 304) AGITATOR Agitator manufacturer: Ekato Baffles: Agitator arrangement: eccentric in upper head AGITATOR 2 Agitator arrangement: lateral on the cylinder TECHNICAL DATA / DIMENSIONS Bottoms wall thickness: 4.6 mm

Sąlyga: naudotas, bakelio talpa: 5 000 l, GENERAL INFORMATION Equipment: Ball valve Design: Suspended Remarks: Top cover made of V2A (1.4301); 4 legs made of Fe; minor internal material wear inside the tank Internal diameter: 1,880 mm Overall height: 3,550 mm Heating/Cooling: available Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: removable / hinged top cover Agitator: Paddle agitator Support type: Legs Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 1,580 mm Last application: Chemicals HEATING / COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manhole / Access port: On top cover (Ø 450) Outlet: DN40 DIN 11851 Note: minor residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: Steel AGITATOR Agitator manufacturer: Fluid Agitator arrangement: Centrally mounted on top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Top cover wall thickness: 4.5 mm Lredpfoxqawusx Aaaow