Siūlų šlifavimo staklės

MSO GA2

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R Nodpfotzdyzjx Af Iokt We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!

Sąlyga: paruoštas naudoti (naudotas), Swing diameter over bed/cross slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, travel X/Z: 220mm/635mm, spindle speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool stations: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible. Nedpfxsv Uqcgs Af Iekt

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1966, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8588, bendras svoris: 400 kg, sukimosi greitis (min.): 3 120 aps./min, sukimosi greitis (maks.): 3 860 aps./min, aukščio reguliavimo tipas: mechaninis, šlifavimo skersmuo: 200 mm, disko skersmuo: 150 mm, atstumas nuo stalo iki veleno centro: 400 mm, Įrankių galąstuvas Naudotas pjovimo ratų galąstuvas, šlifavimo staklės, pjovimo ratų galąstuvas Lorenz tipas MS 80, pagamintas 1966 m., be aušinimo sistemos, ypač tinka tiesiųjų pjovimo ratų (pjovimo diskų) galandimui, didžiausias galandamas disko skersmuo apie 200 mm, didžiausias šlifavimo verpstės slidės eiga apie 50 mm, stalo tvirtinimo plotas apie 600 x 245 mm, stalo eiga išilgai ranka 250 mm, stalo aukštis reguliuojamas ranka 275 mm, su grubiu ir tiksliu reguliavimu, didžiausias naudojamų šlifavimo diskų skersmuo 150 mm. Su pjovimo ratų galandimo įtaisu MSV 75, skirtu kūginio paviršiaus šlifavimui tiesiems pjovimo ratams. Pavarą užtikrina sraigtinė pavara su elektromotoru. Pridedama naudojimo instrukcija. Aukštos našumo speciali staklė skirta pjovimo ratų galandimui. Pjovimo ratų galąstuvą parduodame už patrauklią kainą. Apžiūra prijungus prie elektros galima tik iš anksto susitarus. Njdpfeffybgjx Af Ijkt Kaina pagal užklausimą/speciali kaina. Visi techniniai duomenys pateikiami su galimomis klaidomis arba netikslumais. Pardavimas tik ES šalyse.

Sąlyga: labai geros būklės (naudotas), Thread diameter: 5 - 200 mm Grinding length: 500 mm Thread pitch: 0.25 - 6 mm Clamping length max.: 850 mm Grinding wheel diameter: 350 mm Centre height: 105 mm Thread range: M2 - M149 Thread (inch): 3/32 - 4 in. Nkodpfjwvl H Uex Af Ist Helix angle left/right: +/-10° Total power requirement: 6 kW Machine weight approx.: 3.2 t Space requirement approx.: 2.5 x 1.7 x 1.5 m

Sąlyga: labai geros būklės (naudotas), Workpiece diameter - max. 600 mm Thread length: 7000 mm Module - max. 8 / 12 Module - min. 1 Swivel range: ° Cutter diameter: 63 - 140 mm Spindle speeds - stepless: 45 - 450 rpm Machine weight approx. 12.5 t Space requirement approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, checked and partially overhauled by a specialist workshop. The existing milling head was replaced with an overhauled universal milling head. Equipment: Differential for oblique machining Automatic indexing device (indexing plates interchangeable!) for multi-keyed, multiple-start parts, plus extensive bushings, support rollers, and about 70 change gears. Conversion of milling head speed to a frequency converter with a correspondingly powerful motor is a great feature and saves a lot of setup time. Accessories: About 70 change gears, 3 bushing setting tools of various sizes, about 20 bushings, 2 roller holders, 2 centers for direct mounting on the clamping spindle, 350 mm chuck, 2 spare index plates. Nsdpfx Aewgizdjf Iokt

Sąlyga: naudotas, Gamybos metai: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Center distance: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm stepless across 8 ranges Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total connected load: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for reverse turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitch). Reverse turning and relief grinding is possible from the front side, the rear side, and in the axial direction of the machine. Main drive via 8-step manual gearbox. Feed gearbox designed as 12-step manual gearbox. Rear slide swiveling range = 360° Cross slide swiveling range = 360° Chuck is a taper disc Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm Measuring system ARBAH-L 3+1 Frequency inverter FRENIC 5000G11 Njdpfxevbhv Rs Af Ijkt 3-jaw chuck Ø 250 mm In stock. *

Sąlyga: naudotas, Gamybos metai: 2003, Sukimos skersmuo 190 mm Sukimos ilgis 620 mm Valdymas Fanuc Series 18i-TB Bendras galingumo poreikis 15 kW Staklių svoris apie 13,5 t Užimamas plotas apie 5350x3350x2395 mm CNC tekinimo ir frezavimo centras NAKAMURA TOME Super NTJ Pagaminimo metai 2003 Valdymas Fanuc Series 18i-TB Nsdpfsxiy Auox Af Ijkt - Pagrindinis velenas turi būti kapitališkai remontuotas. - Viršutinė revolverinė galva modernizuota Turbo G42 oro pavara varomu velenu (60 000 aps./min) ir valdymo bloku GTR 3. Ašių kiekis: 9 Revolverinių galvų kiekis: 2 Maks. tekinimo skersmuo: 190 mm Maks. tekinimo ilgis: 620 mm Strypo pratekėjimas: iki 65 mm Maks. sukimosi skersmuo virš lovos: 190 mm Velenų kiekis: 2 (pagrindinis ir priešpriešinis) Veleno tvirtinimas: A2-6 Variklio galia: 15 kW Maks. apsukos: 60 000 aps./min X ašis: 345 mm Y ašis: +/- 45 mm Z ašis: 1240 mm B ašis: +/- 91° viršuje, pilnai servovaldoma, 0,001° Strypo pratekėjimas: D 65 mm - 12 padėčių revolverinė galva varomiems įrankiams - 24 padėčių revolverinė galva tekinimo įrankiams (dvigubų laikiklių technologija) - Su daugybe priedų - 2 x Hainbuch HB griebtuvai

Sąlyga: naudotas, Gamybos metai: 1992, Maximum wheel diameter: 160 mm Wheel width: 710 mm Module - max.: 4.5 Module - min.: 0.5 Cutter speeds - stepless: 70 - 400 rpm Distance between centers: 800 mm Total power requirement: 11 kW Machine weight approx.: 4.7 t Space requirement approx.: 3.6 x 3.0 x 2.0 m 2-cut cycle, shifting, very good condition! Njdjvz Edrjpfx Af Iokt Change gears, milling arbors.

Sąlyga: geras (naudotas), I am selling a set of Mitutoyo gauge blocks. The set is not complete. Nkodpfx Afou Sv Iys Ijt

Gamybos metai: 1987, Sąlyga: paruoštas naudoti (naudotas), Workpiece diameter: 10–350 mm, max. grinding length: 660 mm, clamping length: 1055 mm, max. module: 25 mm, swivel angle: +/-60°, grinding wheel dimensions: 300–500 x 100 mm, equipped with Faudi coolant band filter and Elbaron oil mist extraction unit. Has been classified as non-operational and can only be used as a basis for complete refurbishment. Nkjdpfergah Hjx Af Ist