Pavarų variklis 0,75 kW 378 aps./min

Motovario NHRV 040

Būklė: geras (naudotas), Gear motor, electric motor, three-phase motor, geared electric motor - Manufacturer: Motovario, gear motor type NHRV/040 - Speed: approx. 183 rpm i=7.5 - Motor manufacturer: DRdrives type 71C-4 - Power: 0.55 kW / 1375 rpm - Hollow shaft: Ø 18 x 80 mm - Quantity: 2 gear motors available - Price: per unit Fgjdpjl Tuvajfx Af Ajb - Dimensions: 340/175/H155 mm - Weight: 9.2 kg/unit

Būklė: naujas, Cutting diameter: 225 mm Bandsaw blade length: 2455 mm Table height: 850 mm Cutting width: 245 x 150 mm Cutting speed: 45/90 m/min Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 45° round: 145 mm Cutting capacity at 45° square: 145 mm Connection voltage: 400 Volt Total power requirement: 1.5 kW Machine weight: approx. 0.2 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Mitre bandsaw - Mitre cuts up to 60° to the left Fgedpfx Afsgxi D Ts Aob - Vice with quick-acting clamping device - Blade tension control - Electric coolant system

Būklė: naujas, Drilling capacity in steel (diameter): 30 mm Throat depth: 260 mm Fedpfx Afofv H H As Aegb Drilling stroke: 135 mm Spindle taper: MT 3 Table size: 420 x 350 mm Column diameter: 135 mm Speed range: 125 - 3,030 rpm Feeds: 0.1 - 0.2 - 0.3 mm/rev Total power requirement: 1.1 kW Machine weight approx.: 380 kg Dimensions (L x W x H): 0.9 x 0.55 x 2.2 m High-quality pillar drilling machine with a wide speed range for industrial use.

Būklė: naujas, COLUMN DRILLING MACHINE IBERDRILL AZ 40 TECHNICAL DATA – STANDARD - Max. drilling capacity in steel (St 60) at continuous operation S1: Ø 40 mm - Max. drilling capacity in cast iron (GG 20) at continuous operation S1: Ø 45 mm - Max. thread cutting in steel (St 60) at continuous operation S1: M 33 - Max. thread cutting in cast iron (GG 20) at continuous operation S1: M 39 - Tool holder in spindle: MT 4 - Max. spindle travel (drilling depth): 180 mm - Spindle motor power: 4.12 kW - Drive: V-belt - Speed adjustment: stepless - Speed range for 50 Hz motor, n = 1,500 rpm: 100 – 2,000 rpm - Feed: automatic or manual - Number of automatic feeds: 3 speeds - Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev - Table dimensions (width x depth): 480 mm x 480 mm - Column diameter: 150 mm - Distance spindle center / column: 350 mm - Machine weight (net): 460 kg - Gross weight: 510 kg - Transport dimensions (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASE MACHINE - V-belt drive with frequency inverter - Stepless speed adjustment via potentiometer - Digital speed display - 3 automatic feeds - Mechanical clutch - Depth scale with adjustable drilling depth - Automatic feed reversal for thread cutting - Automatic tool ejector - Worktable can be moved, rotated, and tilted (Type MGI) - Machine base plate with milled support surface, T-slots, and integrated coolant system - Integrated lighting - Emergency stop button - Swarf protection with microswitch monitoring - Thermomagnetic motor protection, control electrics in low voltage area - Colour: RAL 7004 (signal grey), RAL 9011 (graphite black) Fjdpsgy E U Dofx Af Aegb - Documentation, operating and maintenance manual, CE

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, ritės plotis: 200 mm, gaminio plotis (maks.): 200 mm, bendras svoris: 80 kg, garantijos trukmė: 12 mėnesiai, darbinis plotis: 200 mm, produkto aukštis (maks.): 3 mm, ritinio plotis: 64 mm, Silicon+ SFS 200 Servo Roll Feed Unit Compatible with all types of presses; primarily used on Bruderer, Schaal, and Mabu machines. Feed length – min. 0.10 mm to max. 9999.99 mm Feed width – max. 100 mm, 200 mm, or 300 mm, depending on the required model. Material thickness – 0.20 – 3.20 mm Feed angle – 180° Die line height – ± 50 mm Max. feed speed – 20 m/minute Strip release – Festo pneumatics Control system – NC touchscreen Brushless servo motor – 0.75 kW, 1.8 kW, or 2.3 kW. Fedpfjvptz Ijx Af Ajgb Approximate feed unit weight: 80–150 kg. Feed unit dimensions: 780 x 730 x 680 mm – The unit is driven by a direct-drive brushless servo motor, which eliminates gear play and wear, generates no noise, does not require lubrication, and ensures secured synchronization of the paired feed rollers. – Rollers with a PU surface for sensitive material handling can be supplied upon request. – Synchronization of the feed unit with the stamping press is easily achieved via a cam signal from the press PLC. – The feed can be programmed for up to 10 sets of feed steps and saved as recipes. The feed length can be adjusted steplessly during operation. EUR 1 certificate for European origin and CE compliance. These details are subject to change without notice. Upon prior agreement, we can manufacture feed units tailored to your specific requirements.