DDR TS8/8 motorinis siurblys, 800l/min, 28AG.

Motopompa DDR

Būklė: geras (naudotas), Double toggle jaw crusher Guodov Rp N Repfx Af Dsa Manufacturer: O&K Jaw opening: approx. 1,000x850 mm Available immediately

Būklė: naujas, Gamybos metai: 2026, The CORMAK PBM290 horizontal drilling machine is a professional device designed for efficient woodworking. This machine features advanced solutions ensuring excellent quality of machined components. Main features of the PBM290 horizontal drilling machine: Serial drilling capability: This drill is designed for serial drilling, allowing for holes at various spacings (16/20/22/32 mm) using a dedicated dowel drilling device. Simple operation: The worktable is exceptionally easy and intuitive to operate, enabling one-handed use, which significantly enhances operator comfort. Precise table height adjustment: Table height can be adjusted simply and accurately with a handwheel equipped with a numerical counter, allowing for precise setting according to project requirements. Secure workpiece clamping: A set includes an eccentric clamp, providing safe fastening of the workpiece and eliminating the risk of movement during operation. Dual-sided adjustable angle stop: The drill’s angle stop can be adjusted up to 60° on both sides, offering flexibility in performing a wide range of tasks. Tool storage: The machine features a large, lockable tool compartment, ensuring order and easy access to required accessories. Extraction port connection: The drill is equipped with a 100 mm extraction port, enabling connection to a dust extraction system for effective removal of waste and dust, keeping the workspace clean. Additional benefits of the woodworking machine: One-handed operation: The lever allows for one-handed use, improving operator convenience. Height adjustment: Drilling height can be accurately set via a handwheel, allowing drilling at different material levels. Bidirectional operation: The drill can run both left and right, increasing its versatility. Efficient motor: The machine is equipped with a powerful 2.2kW motor. Included accessories: - Three-jaw chuck: Secure and stable drill bit holding during operation. - Travel stop: Facilitates precise drilling depth limitation. - 100 mm dust collector cover: Effectively collects and removes dust during drilling. - Eccentric clamp: Provides a secure hold of the workpiece. - Angle ruler: Facilitates precise angle setting during drilling. Application of the horizontal wood drilling machine: The CORMAK PBM 290 horizontal drilling machine is an indispensable tool for professional carpenters and craftsmen demanding precision, quality, efficiency, advanced solutions and easy operation for horizontal drilling processes. Its versatile features and accessories allow the implementation of various woodworking and similar material machining tasks. Technical specifications TABLE DIMENSIONS 500 x 207 mm DRILL TABLE HEIGHT 760 - 900 mm MAX. DRILLING WIDTH 309 mm MAX. DRILLING DEPTH 150 mm SPINDLE SPEED 2850 rpm DRILL CHUCK CAPACITY 0-16 mm S1 CONTINUOUS MOTOR POWER 2.2 kW POWER SUPPLY 400 V DIMENSIONS 770 x 920 x 1245 mm WEIGHT Gedpfxjvuq Dko Af Deua 117 kg

Būklė: naudotas, Grundfos CR 60 20 A-F-A-BBUE Guodpfxsuif Iue Af Dea Model B500002P39447 16 bar operating pressure Max. 110 degrees Celsius 60 m³/hour 20.2 m head n = 2900 rpm This offer is directed exclusively at commercial customers as defined by §14 BGB. No sale to private individuals.

Būklė: naudotas, Four in a Row – The Success Building Blocks of DLK – Storage Technology | Levelmaker® | Logistics | Solutions WE OFFER Gedpovdqhbsfx Af Djua Panel size: 2,500 mm x 2,000 mm x 38 mm P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding quote tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The indicated price is per piece/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing the applicable VAT. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commerce, industry, and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us with any questions.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 220 V, paskutinio kapitalinio remonto metai: 2026, bendras aukštis: 220 mm, bendras ilgis: 420 mm, bendras plotis: 380 mm, įvesties srovės tipas: Oro kondicionierius, įėjimo srovė: 10 A, Temperatūros reguliavimo stalinis įrenginys Modelis: TG 05-2 W Indai apie 2 x 4 litrai Nerūdijančio plieno konstrukcija Elektroninis temperatūros reguliavimas Jungtis: 230V Godpfxst A Abyj Af Doua Matmenys: 380 x 420 x 220 mm (Plotis x Gylis x Aukštis) Naudotas įrenginys, išvalytas Daugiau įrenginių sandėlyje!

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2004, WEINIG UNIMAT SUPER 4 Planer/Moulder – German-made – Very good condition – Year of manufacture: 2004 – Technical documentation (manual included) TECHNICAL SPECIFICATIONS: Planing width: 150 mm Planing height: 50 mm Spindle diameter: 40 mm Equipped with tooling Adjustable top spindle head 1) Bottom spindle: 11 kW, 6000 rpm Godpfx Afsin Nrgs Doua 2) Top spindle: 18.5 kW, 7000 rpm 3) Lower spindle: 5.5 kW, 6000 rpm Feed motor: 2.2 kW Feed rate adjustable via inverter: 0–18 m/min Feed via cardan shafts Pneumatic pressure system Three top steel feed rollers One top rubber roller Ribbed infeed table Infeed table length: 1,950 mm Total power: 37 kW Central lubrication system Transport dimensions: Length/Width/Height: 320x220x220 cm Weight: approx. 2,700 kg

Būklė: naudotas, System: Mobile dewatering unit, decanter, mobile centrifuge - used Application: Sludge dewatering Model: Alfa Laval DSNX 4250 Year of manufacture: 1996 Guedpfxjwmwrqs Af Dsa Operating hours: 29,200 Generator operating hours: 31,640 (see attached name plate)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 37 656 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 85 t, pildymo angos plotis: 1 500 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 650 kg, bendras svoris: 25 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2024, tūrio srautas: 410 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 9 300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific pressing force: 100 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Strapping: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Gusdpfxov T I Evs Af Doa Note: The machine was used in a recycling facility for compacting paper, cardboard, foils, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH Service Team

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, darbinis slėgis: 250 juosta, aukšto slėgio žarnos ilgis: 10 000 mm, kuras: super 95, bendras svoris: 56 kg, garantijos trukmė: 24 mėnesiai, Technical Specifications: - Pump performance (l/h): 900 - Operating pressure (bar): 250 - Maximum pressure (bar): 300 - Water connection: R 3/4″ - Drive type: Petrol - Engine type: G390FA - Mobility: High - Colour: anthracite - Weight with accessories (kg): 56.8 - Dimensions (L x W x H) (mm): 878 x 538 x 702 Scope of Delivery: - Spray gun - High-pressure hose length: 10 m - Power nozzle - Water filter Equipment: - Protective frame - Crankshaft pump with ceramic pistons Independence: Gjdpfx Aswiwv Ief Doua - Independent of external power sources. Complies with EU Stage V emission standards. Convenient manual start. High Mobility: - Large inflatable wheels for comfortable use on difficult terrain. The compact and small unit can be easily manoeuvred even in the tightest spaces. Fits in a car. Robust and Durable Machine: - The sturdy tubular frame protects the pump from damage. Thermal valve protects the pump from overheating during circulation mode. Crankshaft pump with ceramic pistons. The compact Kärcher HD 9/25 G Classic cold water high-pressure cleaner is the ideal entry-level choice for those looking to use petrol-powered equipment. The machine can be easily transported in a car and enables successful completion of even the most demanding cleaning tasks, for example on construction sites or in municipal applications. The unit offers an operating pressure of up to 250 bar and is equipped with a durable crankshaft pump with a flow rate of 900 litres per hour. User-friendly operation is ensured by the integrated petrol engine (EU STAGE V) which allows operation independent of external power sources, inflatable wheels which provide the necessary mobility on site, an ergonomic handle for easy transport, and practical onboard storage for accessories. Key components are easily accessible for maintenance and effectively protected by thermal and safety valves. The robust steel frame of the HD 9/25 G Classic also prevents external and mechanical damage. The unit does not have the capability to draw water from alternative sources.

Būklė: naudotas, Techninės detalės: x eiga: 500 mm y eiga: 200 mm z eiga: 300 mm Spindelio tvirtinimas ISO: MK 4 Vertikalus pinolės eiga: 60 mm Spindelio galvos pasukimas į kairę ir dešinę: 45° Atstumas nuo spindelio nosies iki tvirtinimo plokštės (min./maks.): 50 / 350 mm (vertikalus) Iškyša (vertikali): 250 mm Stalo tvirtinimo paviršius: 710 x 200 mm Stalas pasukamas apie: 45° dešinėn/kairėn Sūkių diapazonas: 50–2 240 aps./min. (24 žingsniai) Padavimo greitis: 25–1 120 mm/min (24 žingsniai) Bendra galia: 3,2 kW Masė apie: 1390 kg Staklių matmenys (I x P x A): 1,7 x 1,5 x 1,7 m Godpfxsu Nc Uuo Af Deua - Atstumas nuo spindelio centro iki tvirtinimo paviršiaus (vertikaliai): min./maks.: 50 / 350 mm - Atstumas nuo spindelio nosies iki tvirtinimo paviršiaus (horizontaliai): min./maks.: 0 / 350 mm - Frezavimo sijos judesio diapazonas: 600 mm - Be priešlaikiklio - Įskaitant mašininį spaustuvą