CNC tekinimo ir frezavimo centras

MORI SEIKI NT 4200/1000S

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Lodpfxjxmhdns Abrohc Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: naudotas, Gamybos metai: 2008, x-travel 800 mm y-travel 700 mm Lhsdpfow Df A Sjx Abrec z-travel 600 mm Control: SIN 840D Powerline Spindle speeds - stepless: 1 - 8,000 rpm Drive power 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z-axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z-axis: 10,000 N Rapid traverse B-axis: 11.20 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360.000 x 0.001° Table speed range: 1 - 500 rpm Tool magazine: chain magazine for 120 tools Tool diameter: 100 mm Tool diameter with 2 free adjacent spaces: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10.00 kg Total connected load: 60.00 kW Machine weight approx. 13.00 t Space requirements approx. 7.40 x 5.30 x H3.50 m Equipped with Siemens SIN840D control, tool taper cleaning, tool breakage monitoring, coolant system, 2 pressure stages (40 bar / 80 bar), chip conveyor, operation mode 4, extraction system.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 14891, 2012 metų modelis su Fanuc 18i-TB valdikliu Pilnai patikrinta Citizen ir paruošta gamybai Pagaminimo šalis: JP Įtampa: 200V/50-60Hz/3f. Matmenys: 1400x900x1300 mm Grynoji mašinos masė: 950 kg TECHNINĖS CHARAKTERISTIKOS Lhedpfx Aew T S Ilebrjc Valdiklis: Fanuc, 18i-TB serija 6 ašys: (X1/Y1/Z1/X2/Y2/Z3) Strypo maks. skersmuo: 4 mm, Maksimalus tekinimo ilgis: 40 mm, Pagrindinis velenas, maksimalus greitis: 16 000 sūkių/min (12 000 sūkių/min) Indeksavimas: 1° Sukamieji įrankiai, maksimalus greitis: 8 000 sūkių/min Kontrvelenas, maksimalus greitis: 10 000 sūkių/min, indeksavimas 1° Įrankių laikikliai – iš viso 8 įrankiai Vadovaujamas įvorės modulis – standartinis Techninė informacija pateikiama be įsipareigojimų, galimos klaidos ar praleidimai.

Sąlyga: naudotas, Gamybos metai: 2008, veikimo valandos: 5 900 h, X ašies eiga: 350 mm, Y ašies eiga: 220 mm, Z ašies eigos atstumas: 220 mm, Wire diameter 0.1–0.3 mm Automatic re-threading Water bath Operating hours: 5,900 hrs Lhjdpowzyr Aefx Abrec Traverse paths X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year of manufacture: 2008

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 250 mm, sukimosi skersmuo virš skersinio stumduko: 500 mm, tekėjimo skersmuo: 390 mm, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 65 mm, X ašies eiga: 450 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 1 300 mm, strypo praėjimas: 65 mm, bendras aukštis: 2 700 mm, bendras ilgis: 7 000 mm, bendras plotis: 3 000 mm, bendras svoris: 12 000 kg, Įranga: dokumentacija / vadovas, Manufacturer: DMGMORI Model: CTX beta 1250 TC Year of manufacture: 2008 (Retrofit in 2022) Control: Siemens 840D Solutionline Number of axes: 5 axes Equipment: - Automatic tool changer - Swivel head as B-axis - Belt filter system with high-pressure coolant and chip conveyor - Differential pressure chucking main/sub spindle - Workpiece pick-up device - Bar feeder preparation (optional available) Technical Data: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B axis: 220° Spindle bore: 65 mm Spindle speed: 5000 rpm Spindle power: 34 kW Sub spindle speed: 6000 rpm Sub spindle through-bore: 52 mm Sub spindle power: 20 kW Ledpfxeubyv Rj Abrehc Tool changer: 24 positions B-axis interface: HSK 63 B-axis spindle speed: 12000 rpm B-axis power: 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Options: - Full enclosure - CNC-controlled swivel head as B-axis - Coolant system and chip conveyor - Documentation - Geometrically within new machine tolerances Condition: - Machine fully functional - Geometry within manufacturer’s new machine tolerance - All wear parts replaced Retrofit 2022: - Linear guides Z1 and Z2/3 replaced - Linear guide Y-axis replaced - Main and sub spindles overhauled - Milling spindle overhauled - B-axis (bearings and clamping) replaced - Telescopic covers overhauled - Hoses and cables overhauled, drag chains serviced - Cabin doors repainted, inspection windows replaced - Maintenance according to manufacturer’s specifications performed

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, PAGRINDINIS VERPTUVAS: Verptuvo galas: A2-8 Pagrindinio verpstuvo variklio galia: 18,5 kW Maks. pagrindinio verpstuvo apsukos: 4.000 aps./min Maks. verpstuvo perėjimo anga: 80 mm Maks. apdorojamas skersmuo: 366 mm C ašis: 0,001 laipsnio REVOLVERIS: Pozicijų skaičius: 12 vnt. Vairuojamų įrankių skaičius: 12 vnt. X/Z ašių eiga: 280 / 785 mm Y ašies eiga: +/- 50 mm Maks. varomų įrankių apsukos: 6.000 aps./min Varomų įrankių galia: 5,5 kW GALASTIEKIS: Kūgis: MK5 Atstumas tarp centrų: 705 mm ELEKTROS TIEKIMAS: Lhodpfxjx Rvgzj Abrjc Bendra galia: 39 kVA SVORIS IR MATMENYS: Užimama vieta: 3.800 x 2.143 mm Staklių aukštis: 2.232 mm Staklių svoris: 6.100 kg PRIEDAI: Valdymas: MORI MSX-850 II Įrankių matavimo įrenginys Detalių paėmimo įrenginys Drožlių transporterio Aušinimo skysčio rezervuaras Įrankių laikikliai ir valdomi įrankiai

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1984, Pressing force: 3600 kN, pressing force stroke: 1.7 mm, press working capacity: 6120 J. Stroke: 60 mm, installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, tool holder width/depth: 440 mm/320 mm. Dimensions (X/Y/Z): 1300 mm/2000 mm/2230 mm, weight: approx. 6300 kg. Lhodpfx Aer A Eifsbrec

Sąlyga: geras (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 13639, Heidenhain Steuerung Verfahrwege: X-Achse: 1.200 mm Lhsdpoinh Rqsfx Abrsc Y-Achse: 800 mm Z-Achse: 500 mm Hauptspindel: Drehzahl: 16.000 U/min Antriebsleistung – Hauptspindel: 17 kW Werkzeugaufnahme Spindel: HSK63 Spindeldurchmesser vorn im Lager: 70 mm Erweiterter Werkzeugwechsler: 100 Plätze Rundschwenktisch: Tischdurchmesser: 800 mm Schwenkbereich A-Achse: -15° / +97° Drehbar C-Achse: 360° max. Tischbelastung ca. 1.000 kg max. Werkzeugdurchmesser: 80 mm max. Werkzeugdurchmesser bei freiem Nebenfach: 125 mm max. Werkzeuglänge: 300 mm max. Werkzeuggewicht: 8 kg Vorschübe: Eilgang (X / Y / Z): 30 m/min Gesamtanschlusswert: 31 kVA Maschinengewicht: 15 t Platzbedarf ca.: 6,0 x 5,0 x 3,6 m Sonstige Ausstattung: - Dokumentation - Späneförderer - Elektronische Wärmekompensation Y- und Z-Achse

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1983, Press force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 - 120 mm Installation height: 450 mm (maximum stroke, top position) Ram reinforcement: 100 mm Table size: 850 x 810 mm Pass-through opening: 00 x 0 mm Ram surface: 750 x 810 mm Lhedpfjgpxc Ssx Abroc Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guidance - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Sąlyga: naujas, High-performance thread tapping machine with leadscrew device. Safety feature to prevent tool breakage. Programs for single and continuous cycle operation, programmable thread depth, piece counter, LED lamp, and electronically controlled motor braking for single cycle operation. Easy leadscrew change via quick coupling. Lhjdpfx Ajfrlndobrsc Drilling capacity: 15 mm Thread cutting capacity: M 3 – M 10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat: 250 mm Spindle-to-table distance: 185 to 541 mm Table dimensions: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Power supply: 400 V/50 Hz BT 18 GL M00033 4 spindle speeds: 320 rpm, 560 rpm, 1,000 rpm, 1,600 rpm Also available as pillar drilling machine BS 18 GL (M00034)! Digital speed display as standard equipment. Column available 200 mm longer: 14154