Horizontalus apdirbimo centras

Mori Seiki NH4000 DCG

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 37 165 h, X ašies eiga: 560 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 630 mm, greitas poslinkis X ašimi: 50 m/min, valdiklių gamintojas: FS-18IMB (MAPPS 2), ruošinio aukštis (maks.): 800 mm, ruošinio skersmuo (maks.): 560 mm, ruošinio svoris (maks.): 300 kg, stalo plotis: 400 mm, stalo aukštis: 400 mm, stalo ilgis: 400 mm, veleno greitis (min.): 14 000 aps./min, įrankio ilgis: 400 mm, įrankio svoris: 8 000 g, CNC Control: FS-18IMB (MAPPS 2) Axes Travel X-axis mm: 560 Travel Y-axis mm: 560 Travel Z-axis mm: 630 Rapid traverse m/min: 50 Rotary Worktable (4th axis): FULL 4TH AXIS ROTARY TABLE Worktable Number of pallets: 3 Pallet dimensions mm: 400 Max. workpiece size (D x H) mm: 560 x 800 Max. workpiece weight kg: 300 Pallet change time sec: 6 Spindle Max. spindle speed rpm: 14,000 Spindle drive power kW: 18.5/11 kW Spindle torque Nm: 120 Nm (10% duty cycle) Tool system Tool holder: BT-40 Fodpswx Itvsfx Ac Dega Number of tools in magazine: 120 With empty neighboring pockets mm: 140 With occupied neighboring pockets mm: 70 Max. tool length mm: 400 Max. tool weight kg: 8 Tool-to-tool time s: 0.9 Chip-to-chip time sec: 2.8 Equipment Chip conveyor Signal lamp 4th axis Prepared for internal coolant (40/80 bar) RENISHAW OMP60 CE compliant Round pallet storage Worktable measuring system Cooling Tank capacity liters: 500 High-pressure cooling bar: 70 Machine hours: Power-on hours: 135,042 Total power requirement kVA: 32.8 Operating time: 37,165 Base machine: Dimensions / Weight Length mm: 4,004 Width mm: 2,397 Height mm: 2,711 Weight kg: 9,600

Gamybos metai: 2020, būklė: paruoštas naudoti (naudotas), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigerated air dryers, and an oil-water separation system (Beko, also by Atlas Copco), is available. 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery rate: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow rate: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant quantity: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. Fgsdpfx Ajxdc Uvjc Dja 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, controls: 2-6 compressors. 5) Oil-water separation system Beko ÖWAMAT 15, flow capacity range: 6 m³-30 m³/min, oil outlet: DN40, tank volume: 115.5 l, fill volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, X ašies eiga: 560 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 630 mm, bendras svoris: 9 950 kg, veleno greitis (maks.): 14 000 aps./min, ašių skaičius: 4, Šis 4 ašių MORI SEIKI NH4000 DCG buvo pagamintas 2013 m. Jis pasižymi įspūdinga maždaug 560 mm eiga X ir Y ašyse ir 630 mm - Z ašyje. Didžiausias staklių sukimosi greitis yra apie 14 000 aps/min, o svoris su sukamuoju stalu - apie 10 000 kg. Jei ieškote aukštos kokybės apdirbimo galimybių, apsvarstykite mūsų parduodamą horizontalųjį apdirbimo centrą MORI SEIKI NH4000 DCG. Susisiekite su mumis dėl išsamesnės informacijos. • Maitinimo jungtis: 200 V / 3 fazės / 50 Hz • Valdymas: MORI SEIKI Papildoma įranga • CONSEP drožlių transporteris Fodpfxeyw Rh To Ac Dsga • KNOLL aušinimo skysčio filtro įrenginys, modelis FKA/500/KF110 (2013 m.)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, X ašies eiga: 560 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 630 mm, bendras svoris: 9 950 kg, veleno greitis (maks.): 14 000 aps./min, ašių skaičius: 4, Šis 4 ašių MORI SEIKI NH4000 DCG buvo pagamintas 2012 m. Jis pasižymi įspūdingomis maždaug 560 mm eigomis X ir Y ašyse ir 630 mm - Z ašyje. Didžiausias staklių sukimosi greitis yra apie 14 000 aps/min, jose yra sukamasis stalas, CONSEP drožlių transporteris ir KNOLL aušinimo skysčio filtro įrenginys. Jei ieškote aukštos kokybės apdirbimo galimybių, apsvarstykite mūsų parduodamą horizontalųjį apdirbimo centrą MORI SEIKI NH4000 DCG. Susisiekite su mumis dėl išsamesnės informacijos. Fgedpfeyw N R Hex Ac Dea • Prijungimo specifikacijos: 200 V / 3 fazės / 50 Hz • Su sukamuoju stalu • Valdymas: MORI SEIKI Papildoma įranga • CONSEP drožlių transporteris • KNOLL FKA/500/KF110 aušinimo skysčio filtravimo įrenginys (2012 m.)

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT Fodpfx Aehzbipoc Dega FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, X ašies eiga: 560 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 630 mm, stalo apkrova: 400 kg, bendras svoris: 10 000 kg, veleno greitis (maks.): 14 000 aps./min, ašių skaičius: 4, Šis 4 ašių MORI SEIKI NH4000 DCG buvo pagamintas 2011 m. Jis pasižymi įspūdinga maždaug 560 mm eiga X ir Y ašyse ir 630 mm - Z ašyje. Didžiausias staklių sukimosi greitis yra 14 000 aps/min, o tvirtas stalas yra 400 x 400 mm dydžio, didžiausia stalo apkrova - 400 kg. Jei ieškote aukštos kokybės apdirbimo galimybių, apsvarstykite mūsų parduodamą horizontalųjį apdirbimo centrą MORI SEIKI NH4000 DCG. Susisiekite su mumis dėl išsamesnės informacijos. • Turimi vienetai: 2 • CNC horizontalusis apdirbimo centras (Mori 1) MORI SEIKI NH4000 DCG • Prijungimo specifikacijos: 200V/3 fazės/50Hz • Stalo matmenys (plotis x gylis): maždaug 40 x 40 cm • Valdymas: MORI SEIKI • apie 10000 kg • Horizontalusis CNC apdirbimo centras (Mori 2) MORI SEIKI NH4000 DCG • Darbo valandų skaičius: 22 031 • Maitinimo šaltinis: 200V/3 fazės/50Hz • Valdymas: MORI SEIKI Fodpfeyw N I Ssx Ac Dega • maždaug 9950 kg Papildoma įranga • Mori 1 • CONSEP drožlių transporteris • KNOLL FKA/500/KF110 aušinimo skysčio filtravimo įrenginys (2011 m.) • Mori 2 • CONSEP drožlių transporteris • KNOLL FKA/500/KF110 aušinimo skysčio filtro įrenginys (2011 m.)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Ašių eiga: 560x560x620 mm Valdymo sistema: MSX-501 Staklės sandėliuojamos mūsų sandėlyje Bulgarijoje. MŪSŲ SANDĖLYJE YRA: * Horizontalūs apdirbimo centrai Fodpfx Aconyh R Ts Dega * CNC tekinimo staklės su 2 ašimis * CNC tekinimo staklės su 2 ašimis + C ašis * CNC tekinimo staklės su 2 ašimis + C ašis + Y ašis * CNC sriegimo centrai * CNC vertikalūs apdirbimo centrai 100% nuosavybė, daugiau nei 50 CNC staklių sandėlyje! Kviečiame kreiptis dėl papildomos informacijos. CNC World Machine LTD

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Mazak INTEGREX j-200S is a compact 5-axis multitasking machine featuring a sub-spindle (S) for complex turning and milling operations. Key features include an 8-inch main chuck, a maximum machining diameter of {\(\emptyset 500\text{\ mm}\)}, and a maximum machining length of up to {\(910\text{\ mm}\)}. The B-axis provides a swivel range from {\(-30^{\circ }\)} to {\(+190^{\circ }\)}. Main technical data (Integrex j-200S): Machining Capacity: - Max. swing diameter: {\(530\text{\ mm}\)} - Max. machining diameter: {\(\emptyset 500\text{\ mm}\)} - Max. machining length: {\(910\text{\ mm}\)} Main Spindle & Sub-spindle: - Chuck size (main & sub-spindle): 8 inch - Main spindle speed: {\(5,000\text{\ min}^{-1}\)} - Main spindle power (40% duty cycle): {\(18.5\text{\ kW}\)} Milling Spindle (B-axis): - Speed: {\(12,000\text{\ min}^{-1}\)} (typical for j-series, partly optional) - Swivel range: {\(-30^{\circ }\)} to {\(+190^{\circ }\)} (or total of 220°) Fgedpfx Acsyfgdle Doa - Tool holder: KM63 or CAPTO C6 Axes & Capacity: - Y-axis travel: {\(200\text{\ mm}\)} ({\(\pm 100\text{\ mm}\)}) - X/Z-axis: {\(450\text{\ mm}\)} / {\(1119\text{\ mm}\)} - Tool magazine: 20–36 tools (depending on configuration) Control: MAZATROL SmoothG or Matrix Nexus 2 This machine is equipped with full C-axes on both spindles and an automatic tool changer system, making it suitable for highly productive applications in a compact design.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, CNC Control: F31iA X mm: 560 Y mm: 560 Z mm: 630 B axis: 360.000° Table load capacity: 400 kg Cutting feedrate X,Y,Z: 50,000 mm/min Rapid traverse max. X, Y, Z: 50 m/min Spindle speed rpm: 14,000 Spindle power kW: 18.5 Taper type: BT-40 Torque Nm: 120 Tool changer type: Tool magazine positions: 60 Maximum tool diameter: 70 mm Maximum tool diameter with adjacent positions vacant: 140 mm Maximum tool length: 400 mm Maximum tool weight: 8 kg Coolant tank capacity: 500 l Through-spindle coolant pressure: 70 bar EQUIPMENT Chip conveyor Through-spindle coolant with high pressure pump, 70 bar Tool breakage detection probe Renishaw spindle measurement system Extended tool offsets: up to 400 offsets Additional coordinate systems: 48 Workpiece coordinate systems Tool life management Extended program memory - total length: 1,280 m (512 KB) Fgsdpfx Acoyhlqpo Dsa Up to 1,000 storable programs NH4000 preparation: 8 CPP + 8 Pallets

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, veikimo valandos: 17 691 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 560 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 630 mm, ruošinio skersmuo (maks.): 630 mm, ruošinio svoris (maks.): 400 kg, TECHNICAL DETAILS Travel Distances & Axes Travel X-axis: 560 mm Travel Y-axis: 560 mm Travel Z-axis: 630 mm B-axis Max. Rotational Speed: 44.4 rpm Rapid Traverse Rapid Traverse X-axis: 50 m/min Rapid Traverse Y-axis: 50 m/min Rapid Traverse Z-axis: 50 m/min Workpiece Dimensions Workpiece Height (max.): 900 mm Fgsdpfjxvzt Iox Ac Dja Workpiece Diameter (max.): 630 mm Workpiece Weight (max.): 400 kg Spindle & Tools Spindle Speed (max.): 14,000 rpm Distance Spindle Center to Pallet Surface: 80-640 mm Distance Spindle Nose to Pallet Center: 100-730 mm Tool Magazine Capacity: 60 positions Tool Change Time: 0.9 s Tool Holder: BT 40 Pallets Pallet Dimensions: 400 x 400 mm Number of Pallets: 2 Pallet Change Time: 6 s Feed Rates Feed Rate X-axis: 50,000 mm/min Feed Rate Y-axis: 50,000 mm/min Feed Rate Z-axis: 50,000 mm/min Work Table Table Width: 400 mm Table Length: 400 mm Table Load Capacity: 400 kg MACHINE DETAILS Control Model: MSX-701IV Power Consumption: 32.8 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,600 mm Total Weight: 9,800 kg Operating Hours Power-On Hours: 46,259 h Operating Hours: 26,725 h Machining Hours: 17,691 h

Būklė: naudotas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed rate (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras charger Fgjdpfx Acow Ephbj Dea - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table centre to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive capacity: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Controller: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic hand wheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probing system - Workpiece probing system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 - Vise - Tool holder

Būklė: naudotas, Gamybos metai: 2007, x-travel 560 mm y-travel 560 mm z-travel 630 mm Control system: MSX 701 III MAPPS Fodpfjwbi Adjx Ac Dsga Max. spindle speed: 14,000 rpm Main spindle drive power: 18.5 / 11 kW Max. torque: 120 Nm Tool holder: MAS BT 40 Distance spindle center to table: 80 - 640 mm Distance spindle nose to table center: 100 - 730 mm Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Pallet change time: 6.0 sec B axis: 0.001° Number of tool positions: 60 slots Tool holder: MAS BT 40 Max. tool diameter: 70 / (140) mm Max. tool length: 400 mm Max. tool weight: 8.0 kg Rapid traverse (X / Y / Z): 50 m/min Feed rate: 0 - 50,000 mm/min Jog feed rate: 0 - 1,260 mm/min Total power requirement: 35 kVA Machine weight approx. 9.8 t Space requirement approx. 5.5 x 3.5 x 2.8 m CNC horizontal machining center MORI SEIKI - NH 4000 DCG - Pallet changer - Control options: Program restart, cylindrical and helical interpolation High-speed milling cycles, island and pocket milling cycles