Sliekinė frezavimo staklės

MONNIER + ZAHNER MZ 130

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, 7 axes Control: FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Max. bar diameter 16 mm (sub-spindle) Bedewnd Dpspfx Ah Sswh Max. spindle stroke 205 mm Max. spindle speed 10,000 rpm Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear machining) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear-side machining

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Bwodpfx Ahotzdyze Ssh Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 14891, 2012 metų modelis su Fanuc 18i-TB valdikliu Pilnai patikrinta Citizen ir paruošta gamybai Bedpfow T S Ilox Ah Sowh Pagaminimo šalis: JP Įtampa: 200V/50-60Hz/3f. Matmenys: 1400x900x1300 mm Grynoji mašinos masė: 950 kg TECHNINĖS CHARAKTERISTIKOS Valdiklis: Fanuc, 18i-TB serija 6 ašys: (X1/Y1/Z1/X2/Y2/Z3) Strypo maks. skersmuo: 4 mm, Maksimalus tekinimo ilgis: 40 mm, Pagrindinis velenas, maksimalus greitis: 16 000 sūkių/min (12 000 sūkių/min) Indeksavimas: 1° Sukamieji įrankiai, maksimalus greitis: 8 000 sūkių/min Kontrvelenas, maksimalus greitis: 10 000 sūkių/min, indeksavimas 1° Įrankių laikikliai – iš viso 8 įrankiai Vadovaujamas įvorės modulis – standartinis Techninė informacija pateikiama be įsipareigojimų, galimos klaidos ar praleidimai.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2019, veikimo valandos: 1 256 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HTS.XD.26.A1.0133, Maschinenname - Dugard Hanwha Maschinenmodell - XD26H S.N A1.0133 Baujahr 2019 Beschreibung - Fanuc i Serie Steuerung Bsdpfxjwxl Rlj Ah Sewh Max. Drehdurchmesser: 26 mm 8000 U/min Haupt- und Gegenspindel Verwendbare Werkzeuge: bis zu 20 LNS Alpha 312 Stangenlader

Sąlyga: geras (naudotas), Gamybos metai: 2023,

Sąlyga: labai geros būklės (naudotas), Thread diameter: 5 - 200 mm Grinding length: 500 mm Thread pitch: 0.25 - 6 mm Clamping length max.: 850 mm Grinding wheel diameter: 350 mm Centre height: 105 mm Bjdpfx Ahswvl H Ue Sewh Thread range: M2 - M149 Thread (inch): 3/32 - 4 in. Helix angle left/right: +/-10° Total power requirement: 6 kW Machine weight approx.: 3.2 t Space requirement approx.: 2.5 x 1.7 x 1.5 m

Sąlyga: labai geros būklės (naudotas), Workpiece diameter - max. 600 mm Thread length: 7000 mm Module - max. 8 / 12 Module - min. 1 Swivel range: ° Cutter diameter: 63 - 140 mm Spindle speeds - stepless: 45 - 450 rpm Machine weight approx. 12.5 t Space requirement approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, checked and partially overhauled by a specialist workshop. The existing milling head was replaced with an overhauled universal milling head. Equipment: Differential for oblique machining Automatic indexing device (indexing plates interchangeable!) for multi-keyed, multiple-start parts, plus extensive bushings, support rollers, and about 70 change gears. Conversion of milling head speed to a frequency converter with a correspondingly powerful motor is a great feature and saves a lot of setup time. Accessories: About 70 change gears, 3 bushing setting tools of various sizes, about 20 bushings, 2 roller holders, 2 centers for direct mounting on the Bedpfx Ahjwgizds Sewh clamping spindle, 350 mm chuck, 2 spare index plates.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 341966, Country of manufacture: Switzerland Voltage: 400/50/3 Net weight: 2640 kg Customs tariff position: 8458.1120 Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Max. turning diameter: 330 mm Max. diameter over cross slide: 160 mm Center height over cross slide: 83 mm Max. diameter over bed: 430 mm Turning length (depending on equipment): 650 mm Headstock: Standardized spindle nose, allowing use of various collets and chucks via adaptation accessories. Accessories for SCHAUBLIN collets: B45/F48 Max. bar capacity dia.: 36 mm/42 mm Automatic chuck, standard dia.: 170 mm Direct drive with AC motor, power at 100%/50% ED: 15/18.5 kW Max. torque at 100%/50% ED: 135/165 Nm Max. spindle speed: 5000 rpm C-Axis: Pneumatic clamping cylinder: 2700 daN Cross Slide: Transverse travel, X-axis: 240 mm Radial resolution: 0.0005 mm Driven by AC motor, nominal torque: 3 Nm Ball screw, X dia. x pitch: 32 x 5 mm Longitudinal travel, Z-axis: 720 mm Resolution: 0.001 mm Driven by AC motor, nominal torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Feeds: Working feed, X/Z axes, stepless: 0-5000 mm/min Rapid traverses, X/Z axes: 8/10 m/min Feed force, X/Z axes: 420/670 daN Turret tooling system: Number of tool stations: 8 Standardized tool holder interface: VDI 30 Max. tool shank section: 20 x 20 mm Integrated coolant supply Bidirectional indexing Coolant system: Tank capacity: 120 liters Bwjdpfx Ahjw T Smho Soh Pump flow rate: 10 l/min Pressure: 5 bar Except for errors or omissions, the technical specifications are provided without commitment.

Gamybos metai: 2007, Sąlyga: naudotas, Dantytės skersmuo - išorinis dantratukas: 1200 mm Dantytės skersmuo - vidinis dantratukas: 1200 mm Dantytės plotis - maks.: 260 mm Valdymas: Liebherr PC-NC Detalės skersmuo - maks.: 1500 mm Stalo skersmuo: 900 mm Stalo kiaurymės skersmuo: 320 mm Maks. stalo apkrova: 95 kN Variklio galia: 30 kW Aušinimo skysčio siurblys: 120 l/min Ašies atstumas tarp stūmoklio ir ruošinio stalo: 0–820 mm Stūmoklio skersmuo: 125 mm Įrankio laikiklis: SK 45 DIN Staklių svoris apie: 26 t Užimama vieta apie: 8,073 x 6,183 x 4,375 m Judėsiai: - Judesio ilgis min./maks.: 0 mm / 270 mm - Judesio ilgio reguliavimas: 270 mm Bsdpfxew Rf S Eo Ah Sjwh - Judesių skaičius (dvigubas judesys): 10–270 DH/min Įranga/Priedai: - Drožlių transporteris - Pjovimo galvutės laikiklis SK 45 DIN - Aušintuvas - Techninė dokumentacija

Sąlyga: naujas, Centres distance 2000, 3000, 4000, 5000, 6000 mm Bwsdpfx Ahsvnmlqo Seh