Honavimo staklės - Interjero - Horizontalios

MONNIER & ZAHNER MZ640

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, Used swing-beam shears RAS 86.33 with newly ground upper and lower blades, regularly serviced and only lightly used Iisdsv Tk Exopfx Alrjc Technical data: Year of manufacture: 2008 Weight: 6,800 kg Maximum sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Back gauge depth: 5–1000 mm Working height: 800 mm Strokes per minute: 30–64 min⁻¹ Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase current Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angular gauge: 2,195 mm Machine depth with angular gauge: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame throat depth: 100 mm Tank capacity: 150 l

Būklė: geras (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 15 996 h, įėjimo įtampa: 400 V, bendras svoris: 6 750 kg, 1000 kN Max. stroke: 200 Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50 Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser Isdetwliwepfx Alrsic UVV (accident prevention regulations) inspection performed at regular intervals / maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holders: 4 pcs UKB base for double V die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Other: Light curtain in need of repair (replacement value approx. €4,500) – included separately as a spare part (has been replaced) The machine can be inspected live under power in DE84051 Mettenbach by appointment. Sale only to businesses and under exclusion of any warranty!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 10 800 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 600 mm, Y ašies eiga: 1 100 mm, Z ašies eigos atstumas: 900 mm, greitas poslinkis X ašimi: 80 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 60 m/min, X ašies padavimo greitis: 80 m/min, Y ašies padavimo greitis: 60 m/min, padavimo greitis Z ašis: 60 m/min, ruošinio svoris (maks.): 4 000 kg, veleno greitis (min.): 20 aps./min, veleno greitis (maks.): 10 000 aps./min, veleno veikimo valandos: 10 800 h, veleno nosis: HSK 100, įrankių magazino lizdų skaičius: 60, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, DMG MORI DMF 260/11 with CELOS and Siemens 840D SL Operate, well-maintained condition Please refer to the attachment for technical data. Features / Equipment: - Siemens 840DSL Operate with Celos - HSK 100 motor spindle with 10,000 rpm - Linear drive - 5-axis - ICS 40 bar / 600 liters - Chip conveyor - Rinsing gun - Measuring probe - B-axis - Integrated C-axis Isdpfxszbacaj Alrsic The machine is being sold on behalf of our customer and will be available from 10/2026. We guarantee full functionality and geometry within new-machine tolerances upon inspection on-site or commissioning at your facility. We are happy to coordinate removal, loading, transport, and commissioning—all from a single source with our qualified service technicians. Do not hesitate to contact us. We are not a conventional machine dealer. Instead, we support our clients throughout the entire process of sourcing and brokering high-quality used machinery (inspection, purchase, overhaul, transport, disassembly, loading, etc.). Everything from a single source, with warranty and transparent processes. If you are also looking to purchase or sell a DMG MORI used machine in the best possible way, feel free to get in touch with us.

Būklė: geras (naudotas), Gamybos metai: 2017, Ref. No.: 10596 Manufacturer: HELLER Model: H - 2000 Year of manufacture: 2017 Control type: CNC control Controller: Siemens 840 D Location: Halberstadt Country of origin: Germany Iiedox Hn D Dopfx Alrec Machine No.: 56XXX X travel: 630 mm Y travel: 630 mm Z travel: 630 mm B axis: 0.001° Table load capacity: 500 kg Max. tool length: 350 mm Max. tool diameter: 160 mm Tool holder: HSK 63 Number of magazine tool positions: 80 Spindle speed: 16,000 rpm Tool changer: Double gripper Max. workpiece height: 850 mm Max. torque: 95 Nm Rapid traverse X/Y/Z: 60 mm/min Rapid traverse X axis: 80 m/min Rapid traverse Y axis: 80 m/min Rapid traverse Z axis: 90 m/min Spindle motor power: 40 kW Internal coolant supply: 50 bar Number of pallets: 2 Pallet size (L x W): 400 x 500 mm Spindle run time: 1,000 h Operating hours: 3,000 h Max. workpiece interference diameter: 720 mm Media interface: 5-way Additional information: - Equipped with NC rotary table - State-of-the-art spindle technology - Ideal for precision machining tasks - Spindle hours: 1,000 - Pallet manually rotatable 4 x 90° - Hydraulic pressure: 200 bar - Fast drill breakage detection Machine can be inspected under power by prior arrangement.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Grinding wheel width max. 15 mm Ijdpfxjvibc Hj Alreic Grinding wheel diameter max. 110 mm Module – max. 0.5 – 10 Pressure angle 15 – 25° Speed 2800 rpm Total power requirement 0.4 kW Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Finishing and re-profiling on the following models: NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM,... Right adjustment plate with micrometer screw adjustment, axial Left adjustment plate with micrometer screw adjustment, radial 2 precision motor spindles for mounting diamond wheels.

Būklė: naudotas, Gamybos metai: 1998, Bore diameter: 90 mm Stroke: 490 mm Throat depth: 400 mm Total connected load: 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical Honing Machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial no.: 50 / 1790 _____ Max. honing diameter: 10 - 90 mm Max. honing depth: 30 - 450 mm Max. spindle stroke: 490 mm Spindle throat: 400 mm Mounting height under spindle nose top approx.: 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Spindle speeds, infinitely variable: 160 – 830 rpm Stroke speed, infinitely variable: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW - 400 V - 50 Hz Weight approx.: 3,500 kg Overall machine height approx.: 4,000 / 3,300 mm Accessories / Special equipment: • Machine equipped with SIEMENS S5 / Unipos 4.0 PLC for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, fault messages, etc. • With a fixed table 600 x 400 mm • Automatic shut-off after a preset time, followed by spindle return • Automatic motorized expansion of the honing tool via electromechanical feed head ESZ 90/1 D • Separate hydraulic unit, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: good to very good - ready for demonstration Delivery: ex stock - as inspected here Payment: strictly net - upon receipt of invoice Iisdpfx Aet Hw T Solrsc

Būklė: geras (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Description: The machine is in good technical condition, with the possibility of testing upon prior agreement. Equipped with the Siemens Shopturn system, including a loader, and comes fully equipped. BASIC PARAMETERS Working area - Max turning diameter: approx. 410–500 mm - Max length: 800 mm - Distance between spindles: approx. 1020 mm - Swing over bed: ~700 mm - Practical use: ideal for shafts, flanges, bodies up to ~800 mm Travel (axes) - X axis: ~480 mm - Y axis: ??100 mm - Z axis: ~800–845 mm - B axis: ??110?? (5-axis machining) - C axis: 360° (indexing + interpolation) This makes it a full-fledged turn-mill center (not a conventional lathe). Spindles - Main spindle speed: ~5000 rpm - Main spindle power: ~25–34 kW - Bar capacity: approx. 76–87 mm - Sub-spindle speed: ~6000 rpm - Milling spindle (the main difference compared to a conventional lathe) - Speed: up to 12,000 – 20,000 rpm - Power: ~19–22 kW - Taper: HSK-A63 or Capto C6 - Supports: milling, drilling, tapping, and 5-axis simultaneous operations Tool system - Tool magazine: 24 – 48 tools - Live tools: yes (fully integrated) Control system - Siemens 840D sl + CELOS (most common) Isdpfx Alsy Rgaforjic Weight and dimensions - Weight: ~10,000 kg - Dimensions: approx. 6.5 × 2.7 × 2.0 m

Gamybos metai: 2017, būklė: paruoštas naudoti (naudotas), - NAUDOTA - FIBRINIO LAZERIU VAMZDŽIŲ PJOVIMO MAŠINA SU AUTOMATINE PAKROVIMO/IŠKROVIMO SISTEMA MIN. APVALUS SKERSMUO: ø 25 mm MAKS. APVALUS SKERSMUO: ø 355 mm MAKS. KVADRATINIS PJUVIS: 260 X 260 mm MAKS. STAČIAKAMPIS PJUVIS: 300 X 200 mm MAKS. LEIDŽIAMA APKROVA: 100 Kg/m ŠALTINIS: IPG YLS-4000 ; 4000 W Ijdpfx Ajx E Eihjlroic VALDYMO BLOKAS: SIEMENS 840D SVORIS: 12 500 Kg PASTABA: AUTOMATINIS PAKROVIMAS 3-12,5 m; AUTOMATINIS IŠKROVIMAS 12,5 m; 3D PJOVIMO GALVUTĖ; KAPACITINIS JUTIKLIS; AUTOMATINIS REGULIAVIMAS

Būklė: naudotas, Gamybos metai: 2001, Pressure 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system Total power requirement: 29 kW Machine weight approx. 9.5 t Required floor space approx. ... m Quotation Isdpfx Aot Hw N Telrsic We are pleased to offer you—subject to prior sale and errors in technical data—from our stock: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model ROLLEX, Year 2001 Steplessly adjustable rolling force from 0.2 to 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive: approx. 8.5 kW each Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features - The machine is equipped with a modern CNC control system developed by the manufacturer. Allows input of all relevant process and workpiece data, enabling fast and straightforward set-up for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. - Built-in (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device, prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the workpiece front. The stroke of the workpiece slide is approx. 500 mm—so the workpiece is clamped and moves hydraulically between the two rolling tools. - Cooling unit for hydraulic oil, separate electrical cabinet, CNC operating panel, etc. - Transparent safety covers in the working area. Central lubrication.

Būklė: geras (naudotas), Please read the technical specifications thoroughly. If the machine is of interest to you as an investment, we kindly ask you to provide your complete credentials including a valid telephone number and email address when requesting an official offer. DECKEL Milling Machine, Tool Milling Machine DMU 35 M 3 x 2 Axis CNC Milling Machine Equipped with SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Travel ranges (X/Y/Z): 350 x 240 x 340 mm Spindle speed, infinitely variable: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: Max. 55/80 Nm Universal tilt/rotary table: 400 x 290 mm Table load capacity: 100 kg Distance spindle nose/table (min./max.): 145 / 485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotation range: 360 degrees Swivel range: degrees total power requirement: kVA Weight: approx. 1750 kg Technical data non-binding! Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servo motor with toothed belt - 2 gear stages - Full enclosure with sliding door - Swivelling control panel - Coolant nozzles at vertical head - Coolant unit - Chip tray with coolant tank - Electronic handwheel Iiedpfx Aljxz Rdaorjc - Machine mounts - Machine lamp - Serial RS232C interface, LAN (RJ45) The machine is perfectly suited for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. It stands out due to its versatility, with the additional manually operated rotary/swivel table allowing five-sided machining. Condition: Good to very good. Comes from a vocational training center, see pictures. Can be tested under power.