MIKROMAT 20V

MIKROMAT 20V

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Bljdpfxouxft Ej Af Ajg Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 1994, Technical Details: Number of spindles: 8 Spindle bore: 32 mm Item: cam-controlled multi-spindle automatic lathe Brand: Schütte Model: AF32 S DNT Year of manufacture: 1994 Eight-spindle automatic lathe with 8 main spindles Max. nominal through-bore D=32mm Control: Siemens SIMATIC S7 electronic cam switchgear Balluff Gripper at station 8 for rear-side machining CNC cross-slide at position 6 CNC cross-slide at position 7 Workpiece conveyor belt Coolant system Schimpke Chip conveyor with magnetic separator Thread-cutting clutches Blsdpjl Su Rxjfx Af Aog Displayed tool equipment may differ from delivery scope! Please contact us for further information and images via mail(at) or *

Būklė: labai geros būklės (naudotas), Chevron tipo krumpliaračių generatorius MDV 2000 Bledpfx Afofx Ibnj Aeg MDV 2000 charakteristikos: Didžiausias ratlankio skersmuo: 2000 mm Mažiausias ratlankio skersmuo: 50 mm Didžiausias modulis: 12 Mažiausias modulis: 3

Būklė: paruoštas naudoti (naudotas), Presă de debavurare Erfurt PKZe 500/1000 Forță 500 tone Dimensiunea mesei 1020x1420 mm Cursă 400 mm Număr curse/minut – 12 Blsdpfevbcxtjx Af Ajg Motor principal 41 kW Video disponibil

Būklė: naujas, Gamybos metai: 2024, Fiber Laser Cutting System FLV-3015-OT-6022 3kW / VF1530-3000W Blodpfx Aeh Hfldsf Asg Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y axis positioning accuracy: ±0.03 mm - Maximum speed: 60,000 mm/min - Maximum acceleration: 0.7 G - Maximum load capacity: 1,200 kg - Power: 3.0 kW - Source brand: Choice between Raycus or MAX Photonics - Electrical connection: ~3x400 V 50 Hz - Protection class: IP54 Cutting Thickness - Carbon steel: recommended thickness 20.0 mm, max. thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, max. thickness 10.0 mm - Aluminium: recommended thickness 6.0 mm, max. thickness 8.0 mm - Brass: recommended thickness 5.0 mm, max. thickness 6.0 mm Construction Thanks to its welded frame, the machine is highly stable. Japanese Fuji servo drives ensure high speed with excellent precision. Tube Laser The machine is equipped with a tube laser. - Maximum workpiece length: 6,000 mm - Chuck clamping diameter: 220 mm Automatic lubrication system for axis guides. Ease of Operation Loading heavy sheets is facilitated by built-in transport balls, ensuring smooth sliding during loading. Collecting small finished parts is also easier thanks to drawers beneath the machine, which can be conveniently pulled out with a practical handle. RayTools cutting head with autofocus. Option – Otinus Protect This product offers individual protection for your laser source. With this service, you ensure your business continuity remains protected. We keep your operations running so you can deliver your orders on time. Option – Voltage Stabilizer Control Panel The computer runs Windows and CypCut software, which includes functions such as design, file import/export, and job optimization, among others. Installed programs have lifetime licenses. The machine features a wireless controller. Professional Support We maintain continuous contact with our customers. To meet your needs, we include an Otinus Specialist Assist hour package with every purchased machine. Otinus Academy Learning Software When you purchase this device, you get one-year access to online courses that enable you to train new staff members or refresh training knowledge! Package with Ready-to-Use Drawings Every Otinus laser cutting system comes with a package of usable CAD drawings. Included in the machine delivery: - Three-day training and machine installation - Day 1 and 2: up to 8 hours each – commissioning and training on the control system - Day 3: up to 8 hours – independent operation on the machine under supervision of our technician, including the option to program specific details. - Consultation with our specialists - By phone: 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months - Online: 7:30 to 14:30 (Mon-Fri) – an 8-hour package to be used within 12 months - Access to Otinus Academy online courses - LibreCad – access valid for 12 months - Additionally provided: - CAD drawing package

Būklė: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: 550-235-ELD, GENERAL SPECIFICATIONS Blodpfx Ajd Nw Ttef Aog Maximum rolling diameter: 41 mm Max./min. module range: 1.5 / 0.39 Maximum rolling width: 92 mm Maximum stroke of tool carriage: 760 mm Maximum rack length: 610 mm Max./min. diametral pitch: 20/40 – 32/64 Serial number: 550-235-ELD ELECTRICAL SPECIFICATIONS Main motor power: 15 HP

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, X-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm Column clearance 2500 mm Clamping area 3000 x 2000 mm Workpiece weight 10,000 kg Spindle speeds 5–6000 rpm Gear stages 2 Drive power – milling spindle 45 kW Distance milling spindle – clamping spindle 3500 mm Spindle torque 1250 Nm Tool changer 200 positions Tool diameter 135 / 250 mm Maximum tool weight 50 kg Maximum tool length 400 mm Tool holder ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angular milling head yes Automatic tool clamping yes Ball screw spindles yes Guideway covers yes Coolant system yes High-pressure cooling system (internal cooling) yes Blodsvwgmmspfx Af Asg Fully enclosed work area yes Portal machining center with tool changer system and second table plate.

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, 1 PORTALINIS FREZAVIMO STAKLĖS JOBS LINX DESIGN, 2007 m. CNC FIDIA C20 – Siemens linijiniai varikliai – pastūma 50 m/min X 7200 Y 3200 Z 2000 STALAS 6000 X 2500 AUTOMATINĖ GALVA AŠIS A-C A 200° (+-100°) B 400° (+-200°) VELENO GREITIS 24 000 APS/MIN HSK 63 – 27KW – aušinimas ATC 20 įrankių SVORIS 52T Bledpfxoxtp Hwj Af Ajg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 82 500 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 5 000 mm, Y ašies eiga: 3 000 mm, Z ašies eigos atstumas: 1 750 mm, X ašies padavimo greitis: 65 m/min, Y ašies padavimo greitis: 65 m/min, padavimo greitis Z ašis: 65 m/min, veleno greitis (maks.): 20 000 aps./min, greitas poslinkis X ašimi: 65 m/min, greitas poslinkis Y ašis: 65 m/min, greitasis eiga Z ašyje: 65 m/min, sukimo momentas: 63 Nm, bendras svoris: 90 000 kg, Įranga: sūkių greitis be galo kintamas, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining of the workpiece in a single setup (with a 300 mm long tool, A-axis at 90°) Machine operating hours (powered): approx. 82,500 h Total spindle hours: approx. 36,500 h Mounting table No machine table is supplied with the machine. However, we would be happy to offer a custom solution at additional cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped) A & C axes: 2,000 Nm Drives linear axes Feed rate X, Y and Z-axis: up to 65 m/min Axis acceleration X, Y and Z-axis: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space requirement for the machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Blodpfxjxl R Hve Af Ajg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aqua blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area enclosure Optional at extra cost: - Renishaw RMP60 touch probe - BLUM LaserControl NT mini Machine condition Fully operational, in very good condition. Can be inspected under power until April 2026.

Būklė: naudotas, Grinding diameter: 350 mm Bljdeuxfupopfx Af Asg Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.