Universali bandymo mašina / tempimo bandymo mašina

MFC Sensortechnik GmbH T1000 (10kN)

Gamybos metai: 2024, būklė: naujas, mašinos/transporto priemonės numeris: H3000-H5000TM,

Būklė: naudotas, Gamybos metai: 2007, Double-spindle machining center in 5-axis configuration (bilateral) Travel paths X/Y/Z = 600 / 600 (975) / 500 mm Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Spindle speed up to: 17,500 rpm Dcsdpfxjtgu Ixe Aahsd Drive power: 38 kW Tool magazine: 2 x 72 tool positions Tool holder: HSK 63 CNC control: Siemens 840D 1 x tool breakage monitoring 2 x clamping bridge supports H75 mm 2 x 5th axis clamping bridges Coolant system: Knoll, 70 bar 1 x chip conveyor KB1000 1 x drilling head indexing 2 x tool contact surface monitoring 2 x retrofit kits for torsion compensation A-/U-axis

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 2 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1630, bendras svoris: 7 800 kg, garantijos trukmė: 6 mėnesiai, galia: 85 kW (115,57 AG), A complete production line based on the Di Più BRIK MB100 briquetting press is for sale (complete production line). Di Più BRIK MB100 machine, fully overhauled (factory rebuilt in 2025), ready for immediate operation. The machine is designed for high-performance briquetting, suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory, with all vital parts, cables, wiring, and necessary electrical components replaced. As a result, the machine is in as-new condition and comes with a 6-month Di Più manufacturer's warranty. The machine can produce briquettes with or without a hole, with diameters from 90 mm to 110 mm, from both soft and hard wood, in round or square shapes. The machine can be inspected at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. The ideal input material moisture content is between 8% and 12%, and particle size between 1 mm and 12 mm. Technical specifications: - Production capacity: 1,300 – 2,300 kg/h (with sawdust bulk density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression force: 2,000 – 2,500 kg/cm² - Vertical auger with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for closing the extrusion head: 1.5 kW - Feeder with adjustable-speed auger: 1.5 kW - Oil lubrication system for bronze bearings: 100 liters - Briquette output monitoring sensor (automatic shut-off when material runs out) - Guards for moving parts - Oil pressure sensor - Control panel - Hopper for input material (accumulator) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Made from heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material feeding is controlled by a level sensor. - 20-meter-long briquette cooling line - Automatic saw for briquette cutting - The saw automatically cuts briquettes to operator-preselected lengths. - Device for the production of briquettes with a hole - Briquetting press head cooling system with chilled water - The system produces 50 liters/minute of chilled water for efficient head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank with water–refrigerant heat exchanger immersed inside. - Highly efficient fin-pack heat exchanger made of copper tubes and aluminum fins. Dcsdpfx Aajwrp Emehed - 800-liter water tank - Water supply pump (50 l/min – 20 m head – 0.55 kW) with three-way DN25 valves to control cooling water temperature in the briquetting press head. - Digital electronic temperature controller connected to NTC sensor (probe diameter 6 × 52 mm, IP68, AISI 316). OPTIONAL: NOVAPAC packer Optional additional purchase of a NOVAPAC packer, fully compatible with the Di Più BRIK MB100 and other machines, providing an ideal solution for automatic packaging directly after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the last 6 photos.

Gamybos metai: 2018, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H3000TM, Universal Testing Machine H3000TM – Made in Germany Crosshead travel: 520 mm Working depth: 66 mm Overall height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Displacement resolution: 0.01 mm We offer a very large selection of test fixtures: screw grips, wedge grips, pneumatic and hydraulic grips. Compression plates, bending devices, friction test jigs, and much more. Strain gauges, extensometers, long-travel sensors, clip-on transducers, climate chambers. Load cells available: 50N, 100N, 200N, 500N, 1000N, 2000N, or 3000N Including Hess software for Windows 8, 9, 10 or 11, enabling universal test routines, simple test operations also possible without a PC, and one 5 kN SP 56g screw grip with pyramid or rubber jaws (30x50 mm). Factory calibration certificate with DAkkS-calibrated measuring instruments. Calibration performed in both tension and compression in 10 steps. Djdpfxot Rg H Aj Aahecd The H3000TM series universal testing machine is a single-column unit featuring a robust construction of aluminium and V2A stainless steel, with ball screw drives, linear ball bearings, and timing belt drive. The bellows cover provides protection for spindles and bearings. The device is microprocessor controlled, equipped with a membrane keypad. Position and force are displayed on a two-line LCD display. The testing machine can be used either in standalone mode or connected to a PC via a USB interface. Position measurement is carried out using an encoder, with a visible LCD resolution of 0.01 mm (internal resolution: 0.0001 mm). Supplied with a standard load cell offering 0.03% linearity and matching calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel ranges: 500 mm or 1200 mm (measured with load cell, without test fixtures). Scope of delivery: One load cell of your choice (50N, 100N, 200N, 500N, 1000N, 2000N, or 3000N), certificate, 220 V cable, USB cable, instruction manual, and CE declaration of conformity. 3000N Load Cell Measurement range: 1–3000N tension and compression, with nominal 2mV/V output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, including 1.5 m connection cable and calibration certificate.

Būklė: naujas, Bernardo Bandsaw HBS 460 N - 400 V Technical Specifications Cutting width: 465 mm Cutting height: 280 mm Saw blade dimensions: 3607 x 25 x 0.6 mm – 3 TPI Saw blade widths: 9.5 – 25.4 mm Cutting speeds: 420 / 840 m/min Table dimensions: 480 x 630 mm Table height: 970 mm Table tilt: -5° to 45° Extraction port diameter: 2 x 100 mm Motor output (S1 100%): 2.2 kW (3.0 HP) Motor rated input (S6 40%): 3.0 kW (4.0 HP) Voltage: 400 V Machine dimensions (W x D x H): Djdpjd N S Ursfx Aahecd 1050 x 800 x 1950 mm Weight: approx. 162 kg Scope of delivery • Saw blade • Rip fence with magnifier • Mitre gauge • Aluminium drive wheels • Ball-bearing saw blade guide • Motor with brake • Push stick • Operating tools

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, For sale is an FTIR spectrometer – NICOLET IS20 MID-IR DTGS spectrometer, which was used for one year as part of a research project. Operation took place in a laboratory environment; no damage; Scope of delivery: 1x NICOLET IS20 MID-IR DTGS spectrometer 1x IS20 German device labeling 1x European Schuko plug, 250V 1x ATR ITX BASE 1x AR diamond crystal for Smart iTX ATR 1x COMP-U-16 upgrade from 20” monitor to 24” monitor 1x iS10-iS20 TRANSMISSION ACCESSORY 1x ST JAPAN ATR-FTIR POLYMER BUNDLE 1x DELL OPTIPLEX 3090 MT – I3-10105 8GB RRP: € 31,998.77 Sale EXW, as is Dodpferklx Iex Aahecd

Gamybos metai: 2010, būklė: paruoštas naudoti (naudotas), Electrode force: 100 daN, welding power: 255 kVA, rated power: 80 kVA, equipped with DALEX DRF 5.2 cooling unit. Dsdpfxeiknv Ej Aahscd

Būklė: naudotas, Gamybos metai: 1965, Max. core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Dedpst Hwucofx Aahecd Max. drilling diameter: 110 mm Total power requirement: 30 kW Machine weight approx.: 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - solid drilling approx. 2 - 50 mm - boring approx. 100 mm Max. drilling depth: 1,600 / up to 2,000 mm (see stroke/installation length) Drill carriage stroke approx.: 4,000 mm Distance between spindle heads: 5,000 mm Center height over guideways: 350/450 mm Drill carriage feed, infinitely variable: 20 - 200 mm/min Rapid feed of drill carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Working spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V – 50 Hz Overall machine/guideway length: 7,500 / 5,000 mm Total weight approx.: 10,000 kg Accessories / Special features: - Machine consists of the following elements: Main spindle on the left side, followed by a BOZA, powered table assembly with ball screw, BOZA with increased center height, and a spindle stock of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm. Very large and elaborate coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø. - Suitable for rotating workpiece/fixed drilling tool (ELB and BTA methods), as well as for stationary workpiece and rotating drilling tool. Internal (ELB) as well as external oil supply (BTA) possible. - Complete coolant system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rates: 17/40/120 and 220/500 L/min; capacity approx. 2,500 L. - Carriage feed via ball screw and infinitely adjustable DC motor; mounted table cross-adjustable approx. 500 mm, table approx. 800 x 800 mm for clamping cubic and cylindrical workpieces. Electrically controlled via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø. - Modernized control panel with speed display, feed adjustment and indication, kW display, feed/rapid traverse selection (left/right), etc. - 2 separate control cabinets, separate BOZA, sleeves, adapters, clamping aids, and much more. Condition: Good – ready for demonstration soon; machine is highly valuable due to accessories Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice Further deep hole drilling machines constantly in stock – please inquire with us.

Būklė: naujas, Gamybos metai: 2025, Taškinio suvirinimo staklės / stalinės taškinio suvirinimo staklės – naujausias modelis, pagamintas 2025 metais – naujas įrenginys TE 101 valdymas su skaitmeniniu suvirinimo srovės rodymu Nominali galia: 20 kVA/50%ED Tinklo įvadas: 400 V Dcjdpoh Nu A Njfx Aahsd Trump. jungimo srovė: 19 kA Suvirinimo srovė: 15,2 kA Apsauga: 63 A Maitinimo/ fazės kabelis: 25 mm² Elektrodų jėga: 187 daN prie 6 bar Išsikišimas: 160 mm Elektrodo kūgis: MK1 Svoris: 81 kg - 2 pakopų kojinis jungiklis - Pagrindinis jungiklis - Pneumatinis priežiūros blokas su filtru - Įranga yra mūsų demonstracinis modelis - Įranga gali būti parodyta susitarus ir iš anksto užsiregistravus Drezdene

Būklė: naudotas, Gamybos metai: 2007, Swing diameter 640 mm Max. turning diameter 640 mm Control unit Siemens 840 D Powerline - - - - - Main Spindle - - - - - - - - - - - Bar diameter 65 mm Chuck diameter 200 - 315 mm Spindle bore diameter 80 mm Main spindle diameter at front bearing 120 mm --- Counter Spindle --- - - - - - - Bar diameter 65 mm Chuck diameter 315 mm Spindle bore diameter 80 mm Dodpfx Aevx U A Seahscd Front bearing diameter 120 mm - - - - - General Data - - - - - - - - - - - Spindle distance 1,500 mm Turning length 1,185 mm Main / Counter spindle speed 5,000 rpm Driven tool speed 12,000 rpm Slide travel X1, Y1: 550 / 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm CNC Turning and Milling Center | DMG GILDEMEISTER – GMX 250 linear with main/counter spindle, chip conveyor, tool changer, turret designed for driven tools, and equipped with a gantry loading system (Pneumotec gantry system S-01623a). The machine has only approx. 32,000 operating hours. The machine is in very good condition and can be inspected. ----- #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear