CNC portalo plazminio pjovimo staklės

Messer Omnimat L8000

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Cjdpfx Aox Hgl Hek Esrc Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over cross slide: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (flexibly equipped with stationary and driven tools) Turret indexing time: - 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel paths: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Būklė: naudotas, System: Used piston diaphragm high-pressure pump / feed pump Cedpfx Aksdkdi To Ejrc Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Būklė: paruoštas naudoti (naudotas), Presă de debavurare Erfurt PKZe 500/1000 Crodevbcxtjpfx Ak Esc Forță 500 tone Dimensiunea mesei 1020x1420 mm Cursă 400 mm Număr curse/minut – 12 Motor principal 41 kW Video disponibil

Būklė: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Stock machine "NEW" – available at short notice! (subject to prior sale) Control Unit: FANUC 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC storage LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel Ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear Guides & Speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate when milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine (CAM-Type) / Changer: Number of magazine positions: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent empty slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW 15,000 rpm direct drive spindle Spindle oil cooler Coolant, Chip, and Compressed Air Management: Coolant system incl. 300-liter tank and pumps External coolant around the spindle Chip augers right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Other Features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger on control cabinet Auto power OFF function Hand tool set Signal beacon Transformer 400 VAC, 50 Hz Crsdoifn N Njpfx Ak Eec CE Declaration of Conformity in accordance with European directives Electrical and Pneumatic Requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Special Equipment Included: Spindle: - Direct drive spindle SK-40, 15,000 rpm - Drive power (30min/continuous): 18.5 / 15 kW, (FANUC motor) Tool Magazines / Changers: - Drum magazine with 30 stations, DIN69871, SK-40 Rotary or Additional Axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, Chip, and Compressed Air Management: - Bed flush - CTS coolant pump with 20 bar pressure for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip trolley (chip discharge to front on left machine side) Measuring and Monitoring Systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in the machine, incl. mount - Auto door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown with RoboJob Mill Assist 25kg (year 2025 – NEW) - Full enclosure - Double gripper Available immediately

Būklė: naudotas, Gamybos metai: 2002, Max. turning diameter: 300 mm Max. turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Max. swing diameter: 525 mm Distance spindle nose – turret facing surface: 115 – 690 mm Main spindle speed range: 35 – 4,000 rpm Main spindle drive power: 22 kW Max. torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Max. usable bar diameter: 64 mm Max. chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Codpoxmagusfx Ak Eorc Tool holder: VDI 40 Tool shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec Driven tool speed range: 25 – 4,500 rpm Driven tool drive power: 3.7 kW Max. torque (driven tools): 35 Nm Counter spindle speed range: 35 – 4,000 rpm Counter spindle drive power: 7.5 kW Max. torque (counter spindle): 57 Nm Max. chuck diameter (counter spindle): 150 mm X-axis: 190 (185 + 5) mm Z-axis: 575 (580 + 5) mm Counter spindle travel B: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed rate X/Z: 0 – 5,000 mm/min Feed rate C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirements: approx. 5.0 x 3.0 x 2.5 m CNC Turning and Milling Center MAZAK – Super Quick Turn 250 MS - Main and sub spindle - Driven tools - C-axis

Gamybos metai: 2013, būklė: geras (naudotas),  Plasma-Schneid- und Absaugtisch, Abmessungen 2.500 x 6.000 mm.  Portalbrücke.  Fahrwagen mit Servoantrieben (zur Positionierung der Portalbrücke in X-Richtung).  Maschinenfahrbahn, Länge 8 m.  HEB450-Profile für das Fundament der Maschinenfahrbahn, 8 m.  Plasma-Schneideinheit Hypertherm HPR 400XD, 1 Stk.  Fasen-Schneideinheit für Plasma, inkl. automatischem Höhenkontrollsystem.  Absauganlage Filtercube 4H für Plasma-Schneideinheit.  Autogen-Brennschneider, 3 Stk.  Automatisches Höhenkontrollsystem IHT M4000 CAP für Autogen-Schneideinheit, 3 Stk.  Brennerhalterung für Autogen-Brenner (motorbetrieben).  Brennerhalterung Single Drive für Autogen-Brenner, 2 Stk. (automatische Brennerpositionierung).  Laserpointer (zum Ausrichten und Positionieren des Brenners).  Computersteuerung (bestehend aus Industrie-PC und Bedienpult).  Steuerungssoftware 'VACAM Machine Edition' (inkl. VaCad- und VaNest-Software sowie Online-Support).  Automatische Verschachtelungssoftware Sigmanest „Powerpack“ (inkl. 3-tägiger Schulung für max. 3 Personen bei Voortman Holland (Reise-, Verpflegungs- und Übernachtungskosten nicht enthalten) und 1 Tag Online-Support).  Not-Aus mit Reißleine. Csdpfx Akstp Dhpe Eorc  Baujahr: 2013.

Būklė: naujas, Gamybos metai: 2022, X ašies padavimo greitis: 20 m/min, Y ašies padavimo greitis: 20 m/min, padavimo greitis Z ašis: 15 m/min, bendras svoris: 7 400 kg, veleno greitis (min.): 4 000 aps./min, veleno greitis (maks.): 10 aps./min, Y ašies eiga: 1 500 mm, galia: 22 kW (29,91 AG), DYAS Plattenbohrzentrum - DYAS PDC-1500 Anzahl Bohraggregate: 1 vertikal Csdpfsgbfaxsx Ak Ejrc Motorleistung: 22 kW Spindeldrehmoment: 280 Nm Spindeldrehzahl: 10–4.000 U/min Automatischer Werkzeugwechsler (ATC): 16 Plätze Maximales Werkstückgewicht: 760 kg Maximale Bohrleistung: Ø40 mm

Būklė: naudotas, Gamybos metai: 1998, Technical Details: Swing diameter: 830 mm Turning length: 4000 mm Swing diameter over bed slide: 540 mm Spindle bore: 130 mm Speed range: 2 - 1600 rpm Rapid traverse speed: 4 / 5 m/min Feed speed: 1 - 2000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Space requirement approx.: 7 x 2.2 x 2 m Csdpfx Aewwlt Rok Esrc with cycle control from R&D MTC-K MULTIFIX Tool Holder Size D Coolant device

Būklė: naudotas, Gamybos metai: 2004, Sato slicer for sale Csdpsvx N I Njfx Ak Esrc

Gamybos metai: 2015, būklė: naujas, Shaft furnace Clear height: 1100 mm Clear diameter: 790 mm Csdpfx Aecdi D Djk Ejrc External diameter: 1560 mm External height (without lid): 1480 mm External height (with lid): 2300 mm Electrically heated: 40 kW Recirculation fan: 2.2 kW Three-phase connection: 400 V, 50 Hz Temperature: max. 750°C