Gaisrinė mašina

Mercedes-Benz 709 D 4x2 Doka, LF 8

Sąlyga: naudotas, rida: 29 570 km, galia: 66 kW (89,73 AG), pirmoji registracija: 05/1988, kuro tipas: dyzelinas, tuščias svoris: 3 850 kg, didžiausias leistinas svoris: 2 750 kg, bendras svoris: 6 600 kg, padangos dydis: 8,5R17,5, ašių konfigūracija: 4x2, ratų bazė: 3 700 mm, kita apžiūra (TÜV): 04/2022, stabdžiai: pastovus droselis, spalva: raudona, vairuotojo kabina: kitas, pavaros tipas: mechaninis, emisijos klasė: nėra, pakaba: plienas, sėdimų vietų skaičius: 9, Įranga: kabina, papildomi žibintai,

Sąlyga: naujas, mašinos/transporto priemonės numeris: 275437, kuro tipas: dyzelinas, bendras svoris: 35 000 kg, padangos dydis: -, ašių konfigūracija: 8x4, emisijos klasė: Euro 6,

Sąlyga: naudotas, rida: 36 200 km, galia: 66 kW (89,73 AG), pirmoji registracija: 12/1988, kuro tipas: dyzelinas, tuščias svoris: 3 850 kg, didžiausias leistinas svoris: 2 750 kg, bendras svoris: 6 600 kg, padangos dydis: 8,5R17.5, ašių konfigūracija: 4x2, ratų bazė: 3 100 mm, stabdžiai: pastovus droselis, spalva: raudona, vairuotojo kabina: kitas, pavaros tipas: mechaninis, emisijos klasė: nėra, pakaba: plienas, sėdimų vietų skaičius: 9, bendras ilgis: 2 420 mm, bendras plotis: 2 700 mm, Įranga: kabina, papildomi žibintai, priekabos jungtis,

Sąlyga: naudotas, rida: 14 238 km, galia: 100 kW (135,96 AG), pirmoji registracija: 07/1992, kuro tipas: benzinas, tuščias svoris: 4 900 kg, didžiausias leistinas svoris: 2 590 kg, bendras svoris: 7 490 kg, spalva: raudona, vairuotojo kabina: kitas, pavaros tipas: kitas, emisijos klasė: nėra, pakaba: kitas, bendras ilgis: 6 600 mm, Gamybos metai: 1992, statybinis aukštis: 2 850 mm,

Sąlyga: naudotas, rida: 26 455 km, galia: 103 kW (140,04 AG), pirmoji registracija: 02/1998, kuro tipas: dyzelinas, tuščias svoris: 4 940 kg, didžiausias leistinas svoris: 2 550 kg, bendras svoris: 7 490 kg, ašių konfigūracija: 4x2, kita apžiūra (TÜV): 12/2024, spalva: raudona, vairuotojo kabina: kitas, pavaros tipas: mechaninis, emisijos klasė: euro2, pakaba: plienas, sėdimų vietų skaičius: 9, Įranga: ABS, diferencialo užraktas, kabina, papildomi žibintai, priekabos jungtis,

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 16072, Photodirect Offset Plate Camera – Plate Exposer Heidelberg QUICKPLATER 40 Foil thickness: 0.1 – 0.2 mm Foil Punch System (only in long-side format): Heidelberg Quickmaster 46, i.e., two U-shaped holes spaced 220 mm apart, symmetrically aligned to the center of the leading edge of the foil. Foil sizes: Rodeh Axk Ispfx Agiop Landscape format max. 404 x 510 mm Long format max. 350 x 510 mm Landscape format min. 222 x 250 mm Maximum template size: When reduced to 70.7%: 440 x 614 mm When reduced to 64%: 448 x 575 mm Maximum image area on foil: 1:1 landscape format: 350 x 505 mm 1:1 punched long format: 350 x 480 mm 1:1 unpunched long format: 350 x 469 mm 70.7%, long/landscape format: 311 x 434 mm 64%, long/landscape format: 287 x 370 mm Online video inspection via Skype video. You are welcome to visit us – more machines available in stock. Immediately available – can be inspected on site. Located in Emskirchen / Nuremberg – testing possible.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, Professional CO2 laser with a 1600 mm x 1000 mm worktable and a tube rated at 150 W, reaching peak power of up to 168 W! Standard equipment includes a CW5200 industrial water chiller, a compressor for lens and material air assist, and an exhaust system. Work Area: The 1600 x 1000 mm table enables work on large and complex projects. Laser Power: 150 W rated, with peak output up to 168 W. This ensures fast and precise operation. Cooling and Performance: Equipped with a CW5200 water chiller for optimal working conditions and a compressor for lens and materials air assist. Advanced Technologies: Ruida RDC6445S controller, supporting multiple graphic file formats, WiFi and USB interface, and color separation. High Precision & Repeatability: Thanks to precision stepper motors and LEADSHINE linear guides, enabling operation at resolutions up to 2500 DPI. Versatile: Excellent results when engraving and cutting materials such as acrylic, wood, textiles, leather, plastics, and more! Unique standard equipment: PURI 150-168W laser tube, exhaust system, robust steel honeycomb table, and air assist blower compressor. Advanced features, high build quality, and a wide range of applications make our CO2 Laser 1610G not just a machine, but an investment in the future of your business! Rodpfetvmnqsx Agisp Model: 1610G Work Area: 1600x1000mm (Y-axis pass-through table) Laser Rated Power: 150 W Peak Laser Power: 168 W (!) Tube Type/Laser Type: Glass CO2 laser tube Cooling System: Closed-loop water cooling – CW5200 chiller Max Engraving Speed: 800 mm/s Recommended max cutting speed: 400 mm/s Max Cutting Thickness: up to 25 mm depending on material and parameters Minimum Letter Engraving Size: 1 mm x 1 mm Engraving Precision: 2500 DPI Repeatability: ±0.01 mm NEW – Controller and Mainboard: Ruida RDC6445S – a module with extensive features, ensuring advanced control over parameters and machining process Supported Graphic Formats: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported Interfaces: WiFi, USB Color Separation: Yes Drive System: Hybrid closed-loop stepper motors with high holding torque by LEADSHINE 15-mm PMI linear rails Standard Equipment: PURI laser tube 150-168W Fume extractor and ducting CW5200 chiller Knife table Robust steel honeycomb bed Air assist compressor

Sąlyga: naudotas, rida: 54 065 km, galia: 85 kW (115,57 AG), pirmoji registracija: 11/1988, kuro tipas: dyzelinas, tuščias svoris: 4 130 kg, didžiausias leistinas svoris: 2 470 kg, bendras svoris: 6 600 kg, padangos dydis: 8,5R17,5, ašių konfigūracija: 4x2, ratų bazė: 3 700 mm, kita apžiūra (TÜV): 11/2022, stabdžiai: pastovus droselis, spalva: raudona, vairuotojo kabina: kitas, pavaros tipas: mechaninis, emisijos klasė: nėra, pakaba: plienas, sėdimų vietų skaičius: 9, Įranga: diferencialo užraktas, kabina, papildomi žibintai, priešrūkiniai žibintai,

Sąlyga: paruoštas naudoti (naudotas), Technische Merkmale Ausladung: 1200 mm Vorschubgeschwindigkeit: 10 bis 50 m/min Furnierstärke: 0,3 bis 3 mm Arbeitshöhe: 925 mm Antriebsmotor: 0,75 kW Druckluftanschluss für Betrieb erforderlich (2 Liter Expansionsluft/min) Leistung und Motoren Spannung: 380 V Anschluss: Drehstrom Leistung: 1,5 kW Abmessungen Rodpfx Astv Tk Hjgisp gesamte Länge: 2150 mm Breite: 750 mm Höhe: 1650 mm Gewicht: 425 kg

Sąlyga: naujas, Gamybos metai: 2026, The INDUSTRY 2.0 series sets itself apart from the standard series through the use of the best and most precise motors and drive gearboxes in its class, significantly enhancing the machine’s machining capabilities and making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC router features a working area of 1300 x 2500 mm with a Z-axis clearance of 300 mm, and is equipped with a 6 kW electrospindle running at 24,000 rpm, mounted on ceramic bearings. The machine table is manufactured using hybrid technology – it includes vacuum sections and subsections for fully automatic, non-invasive material clamping, as well as T-slot grooves for manual clamping. A hybrid table, i.e., a vacuum table, allows non-invasive mounting of workpieces and permits manual fixation of irregular shapes. The machine frame is fully welded, annealed, and then milled, ensuring precise machining and operational stability. Machine control is via DSP controller NK-105. Tool height sensor included in scope of delivery. Centralized automatic lubrication system for carriages and guides as standard. Power transmission is via a reduction gearbox. The machine travels in all axes (X, Y, Z) on high-quality guides and 25 mm PMI linear bearings. LEADSHINE Easyservo dual servo drive system on the Y-axis. The machine wiring uses high-quality, flame-retardant cables. All electrical cables used in the machine’s construction are flexible and protected against deformation. Rjdpetu I Huofx Agisp Manufacturer: TechnologieCNC Model: 1325 INDUSTRY 2.0 Electrospindle: 6 kW, 24,000 rpm, with full ceramic bearings Max. rapid traverse speed: up to 33 m/min Max. cutting speed: up to 25 m/min Software resolution: 0.01 mm Mechanical resolution: 0.04 mm Working area X/Y/Z: 1300x2500x300 mm – hybrid table (vacuum + T-slot) Control system: NK-105 controller High working speeds and processing stability are ensured by the integrated Leadshine EASY-SERVO drives with encoder and power transmission via SHIMPO planetary gearbox. Software: CAD/CAM standard: Artcam Open 2016 Power supply: 3 phase, 400V, 50–60 Hz For transport: 307 / 190 / 220 The machine is assembled and ready for operation – 307 / 225 / 230.