5 ašių aliuminio apdirbimo centras

MECAL MC 302 Geos 5

Sąlyga: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9911832, X ašies eiga: 10 600 mm, Y ašies eiga: 1 570 mm, Z ašies eigos atstumas: 740 mm, greitas poslinkis X ašimi: 70 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 40 m/min, bendras aukštis: 2 760 mm, bendras ilgis: 11 900 mm, bendras plotis: 4 500 mm, bendras svoris: 10 500 kg, ašies variklio galia: 10 W, veleno nosis: HSK F63, įrankio ilgis: 150 mm, įrankio skersmuo: 20 mm, įrankio svoris: 3 000 g, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, The MECAL MC302 GEOS-5 5-AXIS machining centre, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting profiles made from aluminium alloys, plastics, and steel. Equipped with high-quality components and innovative solutions, the machine can perform machining both on a single working area and within two separate working zones, which significantly increases the speed and efficiency of the production process. Simultaneous machining in two work zones is possible due to the longitudinal work area with a movable machining station and a chip conveyor. The MECAL profile machining centre achieves high structural rigidity thanks to its base made from high-quality steel tubes. During operation, the profile is held in place by special clamps with an independent power supply system, allowing for fast positioning and automatic repositioning of each individual clamp in a very short time. All five axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated, precision guides. The MECAL GEOS-5 machining centre is offered with 3D software that ensures a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile machining centre: - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm - Spindle tilt in A axis: ±120° - Spindle rotation in C axis: ±210° - Rapid traverses in X/Y/Z axes: 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW Bedpou Dl R Usfx Admsdk - Maximum saw blade diameter: 500 mm - Maximum side and end milling cutter diameter: 200 mm - Centralised lubrication

Gamybos metai: 2002, Sąlyga: geras (naudotas), AXES TRAVEL X AXIS (longitudinal) (mm) 7,700 Y AXIS (transversal) (mm) 470 Z AXIS (vertical) (mm) 420 A AXIS (spindle rotation) 0° to 180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Tool holder taper HSK - 63F Automatic tool changer ● Cooling with heat exchanger ● Bsdpfx Asrupldsdmedk ONBOARD AUTOMATIC TOOL MAGAZINE Maximum number of tools in magazine 8 Maximum number of angular heads storable in tool magazine 2 Maximum blade diameter storable in magazine (mm) Ø = 180 FUNCTIONALITY Multi-piece operation ● Dynamic pendulum operation ● WORKABLE FACES With direct tool (top face, side faces) 3 With angular unit (side faces, end faces) 2 + 2 With saw blade tool (top face, side faces, end faces) 1 + 2 + 2 TAPPING CAPACITY With compensator M8 Rigid (optional) M10 WORKPIECE CLAMPING Standard number of clamps 8 Maximum number of clamps 12 Independently motorized clamps ● Maximum number of clamps per zone 6

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, veikimo valandos: 9 965 h, - NAUDOTA - 3 AŠIŲ VERTIKALIOJI APDIRBIMO CENTRAS SU ROTO PALETĖMIS X AŠIES EIGA: 560 mm Y AŠIES EIGA: 400 mm Bdodpfx Adoq Nqkxomsk Z AŠIES EIGA: 570 mm ATSTUMAS NUO VELENO IŠĖJIMO IKI STALO: 210 - 780 mm GREITIEJI PERVEDIMAI X-Y-Z: 40 - 40 - 32 m/min VELENAS: 80-10000 aps./min; 15-18,5 kW; ISO 40 - BT PALETĖS: 2 vnt.; 712x475 mm MAKS. LEIDŽIAMA APKROVA: 300x2 kg AUKŠTO SLĖGIO AUŠINIMAS: 15 bar ĮRANKIŲ MAGAZINAS: GRANDININIS TIPAS; 32 vietos MAKS. ĮRANKIO SKERSMUO: 90(150) mm MAKS. ĮRANKIO ILGIS: 300 mm MAKS. ĮRANKIO SVORIS: 8 kg VALDYMO BLOKAS: FANUC 21i - MB SVORIS: 7600 kg BENDRI MATMENYS: 3010 x 3450 x 3145 mm

Gamybos metai: 2023, Sąlyga: naujas, IMMEDIATE AVAILABILITY! Vibratory Finishing Machines with Separator The machines of the VKUE series can be used for surface processing of both metallic and non-metallic workpieces. These machines feature a large screening area, allowing for easy separation of workpieces from the grinding media. Bdodpfx Aden Smbrjmsk Optional Accessories - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinse pipe (various types) Images are for reference only. Optional accessories are available at an additional cost.

Gamybos metai: 2024, Sąlyga: naujas, Machining Centre Rumba – Machining Length: 3,000 mm / 4,000 mm CNC-controlled machining centre with a vertical machining spindle, suitable for the processing of extruded aluminium profiles, light metals, PVC, and steel from three sides. The work table is CNC-operated and tiltable: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4kW electrospindle, 18,000 rpm, controlled by inverter, and features rapid tool change (tool changer) with ISO30 spindle taper. Interpolation of X, Y, Z, and W axes, controlled by numerical control unit. Brushless motors for X, Y, Z, and W axis positioning. Supplied complete with 4 pneumatic double clamps, tool diameter compensation via software. Axis movements run on linear guides. Left-hand profile stop. 10.4" colour monitor (touchscreen with simplified Windows-based graphics, Teamviewer for remote maintenance, special HICAM 2 / CAMPROX software for loading ISO files and executing programs). Capability for processing longer parts. Standard Equipment: - 4kW ISO30 electrospindle - 4 pneumatic clamps (manually adjustable) - Safety protective guard - Automatic tool changer (10 tools) - 4x ISO30 tool holders each complete with tool - 3x chip collection trays - Air nozzle Technical Data: X-axis travel: 3,000 mm / 4,000 mm Y-axis travel: 400 mm Z-axis travel: 300 mm Rapid traverse (X,Y,Z): 50 m/min Acceleration (X,Y,Z): 1.5 m/s² Electrospindle: 4kW ISO30 / 6.6kW HSK63 (optional) Spindle cooling: air cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (saw blade) Working pressure: 7 bar Weight: 2,500 kg You are welcome to inspect the machine at any time at our manufacturing/showroom facility. Bdsdpfxjhywz Se Admsk Please feel free to contact us. Plantec Maschinen GmbH

Sąlyga: naudotas, TECHNICAL DATA SPINDLES - Number of spindles: 6 - Bar capacity: 40 mm - Rotational speed: 7,000 rpm - Spindle power: 13 / 24 kW CONTROLLED AXES: 27 - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: Z axis CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: Z axis CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled Bdjdpfx Adouhantsmok - Slide unit 5.2: Z axis CNC-controlled - Slide unit 6.1: Z axis CNC-controlled + SCARA axis - Slide unit 6.2: X and Z axes CNC-controlled - Slide unit 6.3: X axis CNC-controlled ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 65 kW WEIGHT AND DIMENSIONS - Footprint: 3329 x 2032 mm - Height: 2654 mm - Weight: 7,100 kg HOURS - Power on hours: 45,965 h - Production hours: 19,065 h ACCESSORIES - CNC Siemens 840D (PL) double NCU - 2 CNC control panels - 6 TOPLUS collet receivers with integrated stop - 1 counter spindle at position 6.1 - Clamping device in counter spindle: Röhm chuck KFD-HS 110/3 - Counter spindle internal coolant supply - CNC options for counter spindle / polygon turning device - Rear machining system on slide 6.2: 3x fixed - Preparation for 2 additional operations with electronic shaft at positions 1, 2, 3 - Preparation for 2 additional operations with electronic shaft at positions 4, 5, 6 - STAUBLI robot type TX60 (6 axes) - Robot gripper with external double clamping, type PZN50 - Swiveling plate (4 positions) - KNOLL coolant tank with articulated chip conveyor, 2 HP pumps 40 bar - BÜSCHEL oil mist extraction system - RIEDEL cooling unit - ARTIS pre-installation

Sąlyga: naujas, Gamybos metai: 2025, The CNC 2040 SPECIAL milling plotter is a precision machine built in Poland, designed for machining a variety of engineering materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (acrylic glass, PVC, HPL, etc.), composites (Dibond, carbon fiber, Alucobond), soft metals, and more. CONSTRUCTION: The plotter is made entirely of high-quality steel. During the manufacturing process, all components undergo specialized heat treatment. WORKING AREA: The working area of our CNC machine is 2100 x 4100 mm, and the entire worktable, which is manufactured using T-slot technology, also measures 2100 x 4100 mm. Z-AXIS TRAVEL AND GANTRY CLEARANCE: The standard Z-axis travel is 200 mm, with an option to increase it to 400 mm upon request. DRIVES: Our plotters are equipped with high-resolution, high-power digital drives, ensuring robust acceleration and speed in all directions. The X and Y axes utilize classic, proven helical racks for durability and precision, while the Z axis is driven by a high-grade ball screw. All axes move on linear guide rails. SPINDLE: The cutting tool is driven by a powerful, liquid-cooled, durable, high-class brushless spindle. The spindle features high-quality machine bearings, which are very quiet and offer above-average durability. Spindle speed ranges from 6,000 to 24,000 RPM. Power is provided by a frequency inverter with higher output than the spindle itself, preventing speed drop under heavy load. SOFTWARE: The machine comes with the latest version of appropriate CAD/CAM software. The software enables quick, easy design of components, which are then converted into G-code. It is also possible to import existing files from other programs. CONTROL: The machine is operated via a controller with its own processor and RAM, ensuring stable and reliable operation. The machine’s controller supports active vector analysis, providing smooth machine motion and minimal processing errors. The controller features a resume function after power loss, so there is no need to reinitialize programs. Its built-in memory allows machine operation without reloading programs for every job. Optional extras: * Vacuum table with Busch or Becker pump * Chip extraction system Bdsdpfx Aein Uiljdmek * Oil mist lubrication * Custom table size available

Gamybos metai: 2018, Sąlyga: beveik kaip naujas (parodų įrenginys), Mitre saw with a saw blade diameter of 600mm (optionally 800mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and angle of the clamping cylinders infinitely adjustable) - Two-hand safety control Optional available: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Version as automatic saw - Loading magazine - Horizontal clamping device - Extraction system - Further accessories on request We would be pleased to provide you with an offer tailored to your requirements. Bdsdpfx Aod Rhzwsdmok The machine can be inspected and tested at 56812.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 1 395 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1400040877,  4-axis (X, Y, Z, A) machining centre,  Designed for economical and efficient machining of aluminium profiles and thin-walled steel profiles,  Version with air-cooled milling spindle,  All machining processes such as milling, drilling and tapping are performed on a stationary profile,  Continuous machining with the use of all tools,  Co-linear tool magazine ensures short tool change times, resulting in optimal processing cycles,  The magazine can be equipped with eight tools,  Windows operating system,  Machine equipped with eluCam software,  Max. machining field length with end machining: 4200 mm, Bdjdeuc U S Nepfx Admjk  Max. machining field length without end machining: 4320 mm,  Automatic length measurement on both sides,  Barcode reader,  Stationary tool magazine (8 slots),

Gamybos metai: 2025, Sąlyga: naujas, mašinos/transporto priemonės numeris: ALÜMİNYUM TEK KAFALI PENCERE ÜRETİM SETİ, • Enables production of 46 - 60 windows within an 8-hour working shift • Our set offers the most competitive pricing for the customer with different machine options • Available in 380 Volt or 220 Volt configurations • Complies with CE (European) standards • Door-to-door delivery pricing to any location worldwide • References available from previous customers in your country Bodpfx Aorfy Dwsdmjdk MACHINE CONFIGURATION • SC 402 ALUMINUM & PVC Bottom-Exit Cutting Machine • SC 542 Aluminum Copy Router Machine • SC 201 Aluminum & PVC Mullion End Milling Machine • SC 901 S Pneumatic Aluminum Corner Crimping Machine You can increase your production capacity with alternative machine configurations. Please contact us for a catalogue.