Mechaninio apdirbimo centras

EMMEGI PHANTOMATIC T3A

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 162 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: C127242, X ašies eiga: 4 300 mm, Y ašies eiga: 270 mm, Z ašies eigos atstumas: 330 mm, valdiklių gamintojas: CamPlus 7.2, veleno greitis (maks.): 20 000 aps./min, veleno veikimo valandos: 63 h, ašies skaičius: 1, įrankių magazino lizdų skaičius: 8, įėjimo įtampa: 400 V, Įranga: sūkių greitis be galo kintamas, CNC machining center with 3 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. The machine is equipped with an 8-slot tool changer, capable of holding 2 angle heads and a disc cutter for 5-sided machining on the workpiece. Machine operating hours: 162h Spindle operating hours: 63h Axis Travel X-axis (longitudinal) (mm): 4300 Y-axis (transverse) (mm): 270 Z-axis (vertical) (mm): 300 Milling Spindle Max. output S1 (kW): 5.5 Max. speed (rpm): 20,000 Tool holder: HSK 63F Automatic Tool Magazine Max. number of tools in magazine: 8 Max. number of angle heads in magazine: 2 Max. disc diameter in magazine (mm): Ø 180 Machinable Profile Sides With tool without angle head (profile top side): 1 With angle unit (profile top, side, and end faces): 2 + 2 With saw blade (profile and end faces): 2 + 2 Thread tapping capability (with tap in aluminum and with through hole) With M8 compensator Nwjdpfxexv Ayij Ad Usp Workpiece Clamping 4 pneumatic clamping units Automatic positioning of clamping units via X-axis Profile Positioning Left reference stop with pneumatic movement Right reference stop with pneumatic movement Functions: Oversize machining, up to double the nominal length on X (two reference stops) Multi-workpiece operation Multi-step machining base – up to 5 steps Multi-piece machining on Y Automatic multi-step machining control Software: Windows, Drill T, CamPlus 7.2 Additional equipment: MG handheld remote control with LCD graphic display (useful in pendulum mode) Barcode reader Tools: Emmegi ER20 angle head Disc cutter, drill bits

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2002, X ašies eiga: 400 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 220 mm, stalo plotis: 515 mm, stalo ilgis: 640 mm, Wire EDM machine Chmer EDM Model: CD 305G X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 220 mm Table size: 515 x 640 mm Year of manufacture: 2002 Operating hours: 16,333 Including documentation and parameters Nwedpfxjqgcimo Ad Uop Dimensions: 245 x 200 x 203 cm (LxWxH)

Gamybos metai: 2008, Sąlyga: geras (naudotas), 4 ašių darbo centras 4 pneumatiniai spaustuvai su automatiniu padėties nustatymu Automatinis įrankių keitiklis su 8 įrankių laikikliais Naudinga ilgis 4000 mm Windows XP Embedded Programinė įranga Camplus Nedoxhck Eepfx Ad Uowp Programinė įranga Shape Nuotolinio valdymo pultas MG pilot

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X-axis travel (longitudinal axis): 4300 mm Y-axis travel (transverse axis): 270 mm Z-axis travel (vertical axis): 300 mm Electrospindle 1 HSD – max 18,000 rpm – power 5.5 kW Nodpfx Aevi N H Ted Uswp Tool magazine capacity: 8 Angular drive for side machining Number of clamps: 4 Clamp positioning: automatic Weight: 1950 kg

Gamybos metai: 2023, Sąlyga: naujas, IMMEDIATE AVAILABILITY! Vibratory Finishing Machines with Separator The machines of the VKUE series can be used for surface processing of both metallic and non-metallic workpieces. These machines feature a large screening area, allowing for easy separation of workpieces from the grinding media. Optional Accessories Nwedpfxen Smbrj Ad Uop - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinse pipe (various types) Images are for reference only. Optional accessories are available at an additional cost.

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles Nodpfjd Nl E Uox Ad Uewp - 2 roller rails in table - mechanical overload in ram (shear plate) The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement

Gamybos metai: 2018, Sąlyga: labai geros būklės (naudotas), For machining aluminium and steel profiles Fully functional, in very good condition Nodpfx Adswynitj Ujwp Year of manufacture: 2018 Machining length: 7,200 mm 3-axis control with 15” display Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate working zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light barrier at the front and side safety fence Minimum quantity lubrication system Central lubrication system Thread cutting without compensation chuck Simple programming via the control device High-speed spindle up to 18,000 rpm Incl. 3 angle heads X axis [mm]: up to 7,200 / 7,200 Y axis [mm]: up to 485 / 310 Z axis [mm]: up to 340 / 260 Travel speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25 mm Max. saw blade diameter: 180 mm Max. tool length: 200 mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Technical Specifications: • Programmable control cutting machine, • Automatic straightening unit, • Sectional roller shear, Njdowi Twhepfx Ad Ujwp • Labeling system, • Outfeed conveyor belt, • Control panel, • Maximum sheet working width: 1270 mm, • Straightening rollers: 6 units, • Number of blades: 5 pairs, • Blade material: stainless steel.

Gamybos metai: 2002, Sąlyga: geras (naudotas), AXES TRAVEL X AXIS (longitudinal) (mm) 7,700 Y AXIS (transversal) (mm) 470 Z AXIS (vertical) (mm) 420 A AXIS (spindle rotation) 0° to 180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Tool holder taper HSK - 63F Automatic tool changer ● Cooling with heat exchanger ● ONBOARD AUTOMATIC TOOL MAGAZINE Maximum number of tools in magazine 8 Maximum number of angular heads storable in tool magazine 2 Maximum blade diameter storable in magazine (mm) Ø = 180 FUNCTIONALITY Multi-piece operation ● Dynamic pendulum operation ● WORKABLE FACES With direct tool (top face, side faces) 3 With angular unit (side faces, end faces) 2 + 2 Nodpfx Aorupldsd Uowp With saw blade tool (top face, side faces, end faces) 1 + 2 + 2 TAPPING CAPACITY With compensator M8 Rigid (optional) M10 WORKPIECE CLAMPING Standard number of clamps 8 Maximum number of clamps 12 Independently motorized clamps ● Maximum number of clamps per zone 6

Gamybos metai: 2024, Sąlyga: naujas, Machining Centre Rumba – Machining Length: 3,000 mm / 4,000 mm CNC-controlled machining centre with a vertical machining spindle, suitable for the processing of extruded aluminium profiles, light metals, PVC, and steel from three sides. The work table is CNC-operated and tiltable: -90°/0°/+90° with intermediate angles. The machine is equipped with a 4kW electrospindle, 18,000 rpm, controlled by inverter, and features rapid tool change (tool changer) with ISO30 spindle taper. Interpolation of X, Y, Z, and W axes, controlled by numerical control unit. Brushless motors for X, Y, Z, and W axis positioning. Supplied complete with 4 pneumatic double clamps, tool diameter compensation via software. Axis movements run on linear guides. Left-hand profile stop. 10.4" colour monitor (touchscreen with simplified Windows-based graphics, Teamviewer for remote maintenance, special HICAM 2 / CAMPROX software for loading ISO files and executing programs). Capability for processing longer parts. Standard Equipment: - 4kW ISO30 electrospindle - 4 pneumatic clamps (manually adjustable) - Safety protective guard - Automatic tool changer (10 tools) - 4x ISO30 tool holders each complete with tool - 3x chip collection trays - Air nozzle Technical Data: X-axis travel: 3,000 mm / 4,000 mm Y-axis travel: 400 mm Z-axis travel: 300 mm Rapid traverse (X,Y,Z): 50 m/min Acceleration (X,Y,Z): 1.5 m/s² Electrospindle: 4kW ISO30 / 6.6kW HSK63 (optional) Spindle cooling: air cooling Max. tool length: 130 mm Max. tool diameter: 140 mm (saw blade) Working pressure: 7 bar Weight: 2,500 kg You are welcome to inspect the machine at any time at our manufacturing/showroom facility. Nedpfxehywz Se Ad Uewp Please feel free to contact us. Plantec Maschinen GmbH