Tekinimo frezavimo centras

Mazak Integrex i-400S

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 40 807 h, Funkcionalumas: nepatikrintas, Full 5 axes. Max. swing diameter over cross slide ø658 mm (ø25.9"). Max. machining diameter (upper turret) ø658 mm (ø25.9"). Max. machining length 2,497 mm (98.31"). Max. bar capacity ø102 mm (ø4.02"). X-axis travel 615 mm (24.21"). Z-axis travel 2,563 mm (100.91"). Y-axis travel 260 mm (10.24"). B-axis indexing range -30° to 210°. Main spindle chuck size 12". Main spindle speed 1 – 3,300 rpm. Main spindle nose A2-8. Main spindle bore ø112 mm (ø4.41"). Main spindle indexing increment 0.0001°. Hydraulic chuck for the sub-spindle (10" through-hole chuck B-210A0815X). Sub-spindle speed 1 – 4,000 rpm. Sub-spindle travel (W-axis) 2,175 mm (85.63"). Main spindle nose – A2-8. Main spindle bore – ø91 mm (ø3.58"). Bearing ID – ø130 mm (ø5.12"). Min. indexing increment – 0.001°. Milling spindle type: turret with automatic torque control. Milling spindle speed 12,000 rpm. Max. milling spindle torque 120 Nm (88.5 ft·lbs). Turning tool shank height 25 mm (1"). Boring bar shank diameter ø40 mm (ø1.5"). Rapid traverse rate: X-axis 50 m/min (1969 ipm). Rapid traverse rate: Z-axis 40 m/min (1575 ipm). Rapid traverse rate: Y-axis 40 m/min (1575 ipm). Rapid traverse rate: W-axis 30 m/min (1181 ipm). Tool holder shaft HSK-A63 (T63). Tool magazine capacity: 72 tools. Max. tool diameter/length (from reference line) ø90 mm (ø3.54") (with adjacent tool pockets empty: ø125 mm (ø4.92"))/400 mm (15.75"). Max. tool weight 12 kg (26.46 lbs). S/N 285804 (2018/04). Note: No tools included. Equipped with Mazatrol SMOOTH X control. Hydrafeed MSV110 bar feeder S/N C02-18L28. SMW-AUTOBLOCK Telbrook T-17915 SLU-X 3.2 steady rest, ø50–200 mm. Filtration Service Engineering E7377 chip management system S/N 21025 (2019). Tool holder (upper turret/automatic). Dual foot switch for chuck operation. Through-spindle coolant. Simultaneous delivery of 0.5 MPa (70 psi) coolant through spindle and upper turret coolant supply. Long drill holder, tool length 400 – 1,000 mm, max. ø80 mm. Machine dimensions: L 6,390 mm x W 2,945.5 mm x H 2,770 mm. Machine weight 20,400 kg. Kdsdsxdbuuspfx Adbew

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 6 612 mm, Y ašies eiga: 5 645 mm, Z ašies eigos atstumas: 1 250 mm, stalo ilgis: 7 000 mm, stalo plotis: 2 500 mm, veleno greitis (maks.): 4 500 aps./min, atstumas tarp stulpų: 3 800 mm, Technical Data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm Kdodpfx Adsxgr Epsbew • Distance between columns: 3,800 mm • Distance table clamping surface – spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Speed in 2 stages, digital spindle drive: 60 – 4,500 rpm • Feed rate in CNC mode (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y and Z-axis each: 25,000 mm/min • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain iTNC 530 path control with 15" screen • Tool changer with 60 positions • Rotary table for operating multiple milling heads with automatic milling head change, including collet system for accommodating various milling heads, quick couplings for hydraulics, coolant and power supply, as well as the corresponding electrical safety switches • Centering of the milling heads on the rotary table via Hirth face gearing (on mounting plate and respective milling head) • 2 x milling heads: straight extension milling head (direct spindle), 45° milling head automatic • Crossbeam motorised traversable (for positioning only) • Operator platform: 2 operator platforms with safety enclosure and integrated control panel, traversing in X-direction, each with 2 doors • Chip conveyors on both sides of the table as well as a cross conveyor • Longitudinal drive X-axis and cross drive Y-axis by rack and pinion and 2 servo motors (electronically preloaded backlash-free, master-slave principle) • Vertical adjustment Z-axis via ballscrew (Ø 80) and preloaded double nut • Zayer guideway system consisting of inserted or bolted, hardened steel strips • All axes equipped with INA roller recirculating shoes on each running surface • Counter guides for all axes additionally coated with plastic for optimum damping • Anchoring and leveling elements • The machine complies with the currently applicable EC directives The above information is taken from the machine documentation. The seller assumes no liability for the completeness or correctness. The actual technical specifications and functions of the machine are binding.

Sąlyga: geras (naudotas), Gamybos metai: 1987, sukimosi skersmuo virš skersinio stumduko: 810 mm, veleno skylė: 130 mm, tekėjimo skersmuo: 1 140 mm, tekėjimo ilgis: 7 500 mm, plunksnos brūkšnys: 300 mm, bendras ilgis: 7 500 mm, bendras plotis: 2 300 mm, bendras aukštis: 1 650 mm, lovos plotis: 600 mm, Bitte beachten Sie: Nicht Originalbilder. Die Maschinenlänge beträgt nur 3000 mm, nicht 5000 mm. 3-fach Führungsbahnausführung 2-Achsen Heidenhain Digitalanzeige Vorschub in 3 Richtungen sämtlicher Oberschlitten Zentrale Schmierung Spannend im Futter tragbar: 2.500 kg Tragkraft ohne Auflage: 8.500 kg Tragkraft mit Stütze: 10.000 kg Kdjdpfx Adjv S Dp Iebsw Optional 4-Backenfutter ca. 1.200 mm Optional 4-Backenfutter ca. 1.500 mm Optionales Paket mit 3 festen Lünetten, Modell von ... bis ... Drehlänge: 5.000 / 7.500 mm Drehdurchmesser über Bett: Ø 1.140 mm Drehdurchmesser über Schlitten: 810 mm Drehdurchmesser über Grube: Ø 1.500 mm Grubenlänge: 2.500 mm Spindelbohrung: 130 mm Bettbreite: 600 mm Reitstockpinolen-Ø: 130 mm Pinolenhub: 300 mm Spindelaufnahme: 6 MK Leistung: 25 kW Drehzahl: 9 – 900 U/min Länge: 7.500 mm Breite: 2.300 mm Höhe: 1.650 mm Gewicht: 12.000 kg

Sąlyga: naudotas, TECHNICAL DATA SPINDLES - Number of spindles: 6 - Bar capacity: 40 mm - Rotational speed: 7,000 rpm - Spindle power: 13 / 24 kW CONTROLLED AXES: 27 - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: Z axis CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: Z axis CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: Z axis CNC-controlled - Slide unit 6.1: Z axis CNC-controlled + SCARA axis - Slide unit 6.2: X and Z axes CNC-controlled - Slide unit 6.3: X axis CNC-controlled Ksdouhantspfx Adbsdw ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 65 kW WEIGHT AND DIMENSIONS - Footprint: 3329 x 2032 mm - Height: 2654 mm - Weight: 7,100 kg HOURS - Power on hours: 45,965 h - Production hours: 19,065 h ACCESSORIES - CNC Siemens 840D (PL) double NCU - 2 CNC control panels - 6 TOPLUS collet receivers with integrated stop - 1 counter spindle at position 6.1 - Clamping device in counter spindle: Röhm chuck KFD-HS 110/3 - Counter spindle internal coolant supply - CNC options for counter spindle / polygon turning device - Rear machining system on slide 6.2: 3x fixed - Preparation for 2 additional operations with electronic shaft at positions 1, 2, 3 - Preparation for 2 additional operations with electronic shaft at positions 4, 5, 6 - STAUBLI robot type TX60 (6 axes) - Robot gripper with external double clamping, type PZN50 - Swiveling plate (4 positions) - KNOLL coolant tank with articulated chip conveyor, 2 HP pumps 40 bar - BÜSCHEL oil mist extraction system - RIEDEL cooling unit - ARTIS pre-installation

Gamybos metai: 2018, Sąlyga: naudotas, x-travel: 1600 mm y-travel: 1300 mm z-travel: 700 mm Distance between columns: 1500 mm Distance spindle center to table: 225-925 mm Table size: 1800 x 1300 mm Table load: 4000 kg T-slots (Width x Pitch x Quantity): 22 x 160 x 8 mm Spindle taper: HSK-A 63 Spindle speed: 24,000 rpm Spindle motor: 25/33 kW Kedpfohx R Dvsx Adbodw Spindle motor torque: 72.6/95.8 N.m. Rapid traverse in X-Y-Z axes: 30,000 mm/min Feed rates X/Y/Z axis: 1~20,000 mm/min Tool changer: 20 positions Max. tool diameter: 100/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Total power requirement: 80 kVA Machine weight approximately: 22 t Machine dimensions (LxWxH): 5660 x 5295 x 3930 mm CNC control: Heidenhain TNC 620 Spindle: IBAG electric spindle 24,000 rpm HSK-A 63 Glass scales: Heidenhain Tool changer: 20 positions Chip conveyor - spiral: 2 units Used CNC high-speed gantry milling machine with extensive accessories at a special introductory price. Key component manufacturers for this stock machine include: · Controller and servomotors: Heidenhain, Type TNC 620 · Ball screw bearings: Japan NSK · X-axis ball screw: Taiwan Hiwin · Y-axis ball screw: Taiwan Hiwin · Z-axis ball screw: Taiwan Hiwin · 3-axis linear guideways: Japan THK or Germany Rexroth · Electric spindle unit: HSK A63-24,000 rpm by IBAG · Linear encoders: Heidenhain · Pneumatic system: Japan SMC · Lubrication: Japan Showa · Covers: Hema · Air conditioning: Taiwan Kaokung · Spindle water cooler: Taiwan-Punkt · 3-axis cable drag chain: Germany Igus · Coupling: Germany KTR · Machine enclosure: Germany Mecano · Relays: Omron · Electrical systems: Germany Schneider · MPG handwheel: Japan Tosoku For more information about the machine, standard accessories, and special accessories, please refer to the attached documentation. Of course, we are also happy to organize delivery to your location including assembly/commissioning, handover ready for operation, as well as operator training.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2003, darbinis plotis: 4 300 mm, gerklės gylis: 450 mm, atstumas tarp stulpų: 3 700 mm, darbinis greitis: 120 mm/s, atbulinės eigos greitis: 120 mm/s, galinis atmušas: 550 mm, bendras svoris: 21 500 kg, bendras ilgis: 5 100 mm, bendras plotis: 2 000 mm, bendras aukštis: 3 300 mm, spaudimo jėga: 300 t, Įranga: apsaugos šviesos užtvara, Press capacity: 300 t Kedpfjwc Sbrsx Adbjdw Bending length: 4,300 mm Frame gap: 3,700 mm Back gauge travel: 550 mm Stroke length: 300 mm Throat depth: 450 mm Approach speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 120 mm/sec Control: Delem DA65 Equipped with: - Y1, Y2, X & R axes controlled - CNC hydraulic crowning - Various sets of bending tools - Lazer Safe safety light curtain - Operating manual and machine documentation Country of origin: Netherlands Motor power: 30 kW Machine dimensions (LxWxH): 510 x 200 x 330 cm Machine weight: 21,500 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 1 139 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 599 mm, tekėjimo skersmuo: 530 mm, ašies variklio galia: 11 000 W, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 6 000 aps./min, veleno skylė: 56 mm, X ašies eiga: 530 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 599 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 30 m/min, Outstanding machine with the option for integration with a brand new IEMCA Master 52 bar feeder, featuring only 1,100 operating hours. Multitasking capability enables simultaneous milling and turning operations. Rugged and precise construction with a rigid cast iron frame. Dual tool magazines: Revolver turret plus an internal magazine housing an additional 12 CAPTO tools stored securely inside, 12 tools mounted on the turret, and 6 hybrid square 25 mm tool holders (refer to the attached technical data sheet). Kdodpfx Adsvv Tvfsbsw Twin spindle design allows for secondary operations. Equipped with Fanuc 0i-TF CNC and Manual Guide. Includes Tool Overload Detection System (automatic tool overload monitoring). Full documentation provided. Also equipped with transformer, chip conveyor, 15-bar coolant pump, presetting device, parts catcher and finished part output conveyor, and work lamp.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year 2007 – Fanuc 21i-TB 1 External Grinding Spindle Country of Manufacture: Switzerland Voltage: 380/50/3 Net Machine Weight: 4000 kg TECHNICAL SPECIFICATIONS Distance Between Centers: 600 mm Center Height: 175 mm Maximum Workpiece Weight: 80 kg Longitudinal Slide Z Maximum Travel: 800 – 1150 mm Speed: 0.001 to 10,000 mm/min (early 2000s model: 0.001–5,000 mm/min) Resolution: 0.0001 mm Transverse Slide X Maximum Travel: 285 mm Speed: 0.001 to 20,000 mm/min (early 2000s model: 0.001–10,000 mm/min) Resolution: 0.0001 mm Wheelhead (Universal Version) Swivel Range: -15 to 225° (early 2000s model: -15 to 195°) Swivel Axis: 2.5 / 1° Hirth Drive Power: 7.5 or 9 kW or 11 kW Grinding Wheel: 500x63 (80/110F5) x203 mm Workhead Speed: 1 – 1,500 min⁻¹ Kodpfxow T Sh Ej Adbjdw Taper: MT4 or MT5 / ISO 50 Drive Power: 1.6 or 3.0 or 4.0 kW Tailstock Taper: MT3 or MT4 Quill Stroke: 35 / 50 mm (early 2000s model: 35 mm) Quill Diameter: Ø 50 mm Fine Adjustment: +/- 40 µm Controller: Fanuc 21i-TB All technical data is provided without guarantee, subject to errors and omissions.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Die Brema EKO 2.2 ist die neue, kompakte und vielseitige vertikale Bohrmaschine, die die Bearbeitung verschiedener Plattenformate und -stärken bei geringer Stellfläche ermöglicht. Sie ist die ideale Lösung für eine "Just-in-Time"-Produktion, auch bei komplexeren Fräsbearbeitungen. Höchste Maschinenindividualisierung entsprechend den Produktionsanforderungen Maximale Fertigungseffizienz durch Wegfall von Rüstzeiten Großes Spektrum bearbeitbarer Platten Brema EKO 2.2 – CNC-Bearbeitungszentrum für Platten X-Bearbeitungsbereich: 3200 mm Y-Bearbeitungsbereich: 1250 mm Bearbeitbare Platten (Mindest- und Maximalmaße) Maß MIN (mm) MAX (mm) Länge (X) 200 3200 Höhe (Y) 35 1250 Stärke (Z) 8 60 Max. bearbeitbares Plattengewicht: 50 kg (*) Verhältnis Plattenhöhe (Y) / Länge (X) ≤ 0,75 bei Platten bis L = 320 mm (°°) Verhältnis Plattenhöhe (Y) / Länge (X) ≤ 1,5 bei Platten L > 320 mm Bei Minimalplatten, die nur mit einer Greifer-Spannung gehalten werden, sind alle Bearbeitungsarten möglich – ausgenommen jene im Greifereingriffsbereich. Bei Bearbeitung auf Greiferhöhe kann ein Kippen des Werkstücks erforderlich sein. Alle Operationen sind im Einzelfall in Bezug auf Plattenmaße (insbesondere Mindestwerte), Materialart, Beschichtung und Bearbeitungsanforderungen zu prüfen. Arbeitsbereich der Werkzeuge (Mindest- und Maximalmaße, bezogen auf Werkzeugachse) X-Achse Operation MIN (mm) MAX (mm) Bohren 0 3200 Fräsen (mit Elektromotor-Spindel) 0 3200 (^) Nutenfräsen (mit Sägeblatt in X) 0 3200 (^) Y-Achse Operation MIN (mm) MAX (mm) Kjdpfjwnx Ivox Adbsdw Bohren 0 1250 Fräsen (mit Elektromotor-Spindel) 0 1250 Rf Nutenfräsen (mit Sägeblatt in X) 25 1250 Z-Achse Operation MIN (mm) MAX (mm) Horizontale Bohrungen 0 35° Ru (^) Mit automatischer Greifer-Umpositionierung (°) Maximalmaß kann je nach Plattengröße und Greiferpositionierung reduziert sein.

Sąlyga: geras (naudotas), Gamybos metai: 2006, veikimo valandos: 21 437 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 122574, Controller: OSP P200 L Sehr geringe Spindelstunden. Max. Drehdurchmesser: ø 720 mm Abstand zwischen den Spindeln: 2.000 mm Spindeldrehzahl: 3.500 U/min Spindelleistung: 30 kW Gegenspindel; Spindeldrehzahl: 3.800 U/min Ksdpfx Aourfz Iodbodw Spindelleistung: 22 kW Werkzeugantrieb Drehzahl: 5.000 U/min Werkzeugantriebsleistung: 22 kW Anzahl der Werkzeuge unten Revolver: 12 Obere Frässpindel: HSK100 ATC: 32-fach HSK100 Y-Achse: 250 mm (+125 / -125) Aufstellfläche: 6.150 x 3.073 mm