CNC tekinimo ir frezavimo centras

Mazak Integrex 300 3 ST

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, Gamintojas: MAZAK Tipas: INTEGREX 300-3ST Pagaminimo metai: 2004 Valdymas: Mazatrol 640 CNC valdymas Staklių svoris apie: 14.200 kg Įrankio tvirtinimas: Capto C6 X eiga: 530 mm Y eiga: 200 mm Z eiga: 1.065 mm Sūkių diapazonas: 4.000 aps./min Kwodpeyh I Rvjfx Abrsu Tekinimo skersmuo: 300 mm Tekinimo ilgis: 1.000 mm Apytiksliai matmenys: 6.500 × 3.000 × 3.200 mm Įrankių revolverio vietos: 80 vnt.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. Kwjdpfx Aexmhdnebrsu The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: geras (naudotas), Gamybos metai: 2009, Ref. No.: 10556 Manufacturer: DMG MORI Model: DMC 60 FD Year of manufacture: 2009 Control type: CNC Control system: Siemens 840DSL-721 Location: Halberstadt Country of origin: Germany X travel: 630 mm Kwjdoxc Tt Tspfx Abrsu Y travel: 800 mm Z travel: 850 mm Max. workpiece diameter: 600 mm Max. workpiece weight: 400 kg Spindle speed: 12,000 rpm Tool changer: 60 positions Max. workpiece height: 500 mm Machine weight approx.: 10 t Number of pallets: 2 Motor spindle: 24,000 rpm Additional information: - Internal cooling - B-axis swivel range -5/ +110° - Cooled table support, table bearings and motors - Cooled bearing blocks and ball screw nuts - Cooled linear guides on X/Y/Z axes - Drive power: 100% duty cycle/40% duty cycle 24 kW/35 kW - Chip conveyor - Internal coolant supply - Electronic handwheel - Rotary table turning function - Operating mode 4 - 2 pallets, Ø 630 mm - Pallet changer with rotary function - High-pressure coolant supply 40 bar, 980 litres, paper band filter - Dsc Htetzywvjlwwxokp - Heidenhain touch probe - 3D Quickset Machine can be inspected under power by prior arrangement.

Sąlyga: naudotas, Gamybos metai: 2019, Swing diameter 400 mm Turning length 584 mm Swing over bed 750 mm Control Siemens 828 D Shop Turn Spindle bore 81 mm Spindle speed: 3500 rpm Spindle drive 18.5/22 kW Spindle torque 410 Nm Number of tools in turret 1: 12 BMT 65 of which driven: 12 BMT 65 Speed of driven tools 5000 rpm Milling spindle drive: MK 5 kW y-axis +/- 60 mm Rapid traverse 30/30/10 m/min Tailstock MK 5 Dimensions (L x W x H) 4.6 x 1.9 x 2.1 m Machine weight approx. 6.65 t Flat-bed CNC lathe with driven tools and Y-axis - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor Ksdpfxeww Nazj Abrewu - Parts catcher with box in the door - Signal lamp - 2 + 2 driven tool holders - Various fixed tool holders - Flat guideway - Tool measuring arm - Programmable tailstock - 23 bar coolant system - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual-pressure clamping

Gamybos metai: 1990, Sąlyga: geras (naudotas), CNC 4th Axis Manufacturer: NIKKEN Kwsdpfsgabu Ujx Abrju Model: CNC-200, Year: 1990 Including tailstock and base plate.

Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 671 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 450 mm, greitas poslinkis X ašimi: 35 m/min, greitas poslinkis Y ašis: 35 m/min, greitasis eiga Z ašyje: 35 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: Heidenhain TNC7, ruošinio svoris (maks.): 1 100 kg, stalo plotis: 800 mm, stalo ilgis: 616 mm, sukimosi greitis (min.): 20 aps./min, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Heidenhain TNC7 Velenas HSK-A63 16000 min-1 30 įrankių vietų Standus tvirtinimo stalas 800x616 Vidinis aušinimo skysčio tiekimas 40 barų su popierinės juostos filtru Grandininis transporterio grandiklis Rankinis ratukas BLUM LC53-Digilog įrankio lūžio / matavimo sistema Matavimo zondas BLUM TC Mašinos veikimo laikas: 671 h Veleno veikimo laikas: 61 h Kwsdpfx Aboyf E Atsrju Mašina apie 6 mėnesių senumo. Parduodama pagal kliento užsakymą. Apžiūra įmanoma iš anksto susitarus.

Sąlyga: geras (naudotas), Gamybos metai: 2005, veikimo valandos: 39 256 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 780 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 560 mm, bendras aukštis: 2 800 mm, bendras ilgis: 7 000 mm, bendras plotis: 7 000 mm, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 12 000 kg, For sale is a machining center from Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X travel: 780 mm Y travel: 560 mm Z travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range – main spindle: 20 - 12,000 rpm Drive power – main spindle: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis stepless swivel: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool pockets: 120 positions Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse (X / Y / Z): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Footprint: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant unit, high-pressure coolant system 40 bar through-spindle coolant (IKZ), Kodpewtft Njfx Abrjwu paper band filter, pallet changer 2 positions, tool breakage monitoring Accessories such as clamping devices or tool holders are not included in the offer. Transport and loading can be organized across Europe upon request and at extra cost. Prices plus VAT Inspection by appointment possible. Contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of live tool positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB SIDE MACHINING - Number of positions: 3 Kwjdeuhazgspfx Abrsu ELECTRICAL SUPPLY - Supply voltage: 400 [V] DIMENSIONS AND WEIGHT - Installation space: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] EQUIPMENT - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Sąlyga: geras (naudotas), Gamybos metai: 2004, veikimo valandos: 77 711 h, X ašies eiga: 650 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, valdiklio modelis: Heidenhain iTNC530, greitasis eiga Z ašyje: 45 000 m/min, greitas poslinkis X ašimi: 45 000 m/min, greitas poslinkis Y ašis: 45 000 m/min, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Hermle C30 U Siemens 840D Mašinos įjungimo laikas: 77711 val. Spindulio įjungimo laikas: 16294 val. - HSK-A63 10000 min-1 velenas - 32 įrankių vietos - SRT 280 mm apvalus stalas su integruota fiksavimo sistema SK50 (jei nereikalinga, galima uždaryti arba perkonstruoti į nulio taško fiksavimo sistemą) - Išorinis aušinimo skysčio padavimas - Vidinis aušinimo skysčio padavimas su popieriniu juostos filtru 80 bar - Drožlių nupūtimo pistoletas - Drožlių transporter - Rankinis valdymo modulis - Automatinės kabinos durys - 32 įrankių vietos plius dar 87 ZM87 vietos Kwjdpoxcp R Iofx Abrsu - Terminė kompensacija - BLUM įrankių matavimo sistema šone - Renishaw matavimo jutiklis - Drožlių konteineris - Būsenos šviesos indikatorius Mašina visiškai patikrinta, yra geometrijos protokolas ir apskritimo tikslumo bandymų matavimai. Mašiną galima bet kada apžiūrėti ir išbandyti įjungtą. Labai gerai prižiūrėta būklė.

Sąlyga: naudotas, Gamybos metai: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Kwjdst Hwupjpfx Abrou Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm / 170–600 rpm Stroke speed, stepless hydraulic: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special equipment: - Integrated 2-station rotary table for accommodation of 2 workpieces, with mechanical workpiece clamping via hand lever. - Hydraulic feed of the tool - Shut-off via timer, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – demonstration ready Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock; please inquire with us.